GT 650 m

Similar Questions

• Reinstall the driver for Nvidia GeForce GT 650 M

  How can I reinstall the driver for nvidia geforce gt 650 m on my MacBook Pro (retina, medio 2012)? And where can I find the driver?

  Yo, why yo need to install an additional driver?

  Mac OS is delivered with all necessary records for the components provided by Apple.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• GTX 650 PC not start

  Hello
  I have a Hp p6745ru
  I recently bought the 650. GTX when I install the screen card startup hp turns on and just there for a while. I hear a followed another beep beep about 30 seconds later. Then the screen goes black.
  I refreshed Windows and remove all drivers associated with the latest GPU.

  PC with my radeon hd6570 everything is working properly.
  The power supply of the system is 550w recommended by nvidia for the 650.
  Map of have no vices, I tested it on another PC.
  I read on other forums, that my motherboard is not compatible with my 650 gtx because the BIOS is a very old, so I have him to update, but I can't find a new version (on the site official c. 7.15 but this version ver. 2011).
  Where is the new version?
  Thank you very much
  Rimad

  Hello

  Removing the drivers will not solve the problem.

  I suspect that the NVIDIA GTX 650 isn't compatible with your PC.  Your PC is 3 years and I don't expect HP to post an update of the BIOS of your PC.

  Return the graphics cards and try the NVIDIA GTX 660 or one of the NVIDIA GTX 750 models.

  MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF

• ProBook 650 2: Service connection manager not installed

  I'll put up a HP PB 650 G2.

  Wireless light won't change color, his orange and stays orange, even if I press on it.

  Wi - fi is on and I can connect to a wi - fi network.  I want the ability to disable.

  I downloaded the HP connection manager & installed, but I get an error during installation, photo attached.

  When I try to open the connection manager, I get a message that the Connection Manager service is not installed.

  Troubleshooting leads me on a path of system recovery...

  Get it sorted, the hot HP lack keys installed.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_129672_1

  Downloaded and installed.

  works fine now.

• ProBook 650 G1: Encrypted ProBook 650 G1 boot - error of BCD

  Hello

  We have a Probook G1 650 encrypted with winmagic that won't start. Is imperative to save the data from the hard drive.

  We also have the encryption key, but we cannot load because when the screen to load the file there is no way to locate the file.

  If you put the hard drive on usb adapter we can not see, obvious, because is encrypted and so we can't change the bcd file.

  Please give us a solution!

  P.S. in our society, we have 30 laptops (probook 450 and 650) and with 50-60% of them we had this problem, is very frustrating, but now the user who works on this laptop has not record data on time.

  Thank you

  The work units, to update HP customer Security Manager and HP Drive Encryption to avoid the mistake of BCD. Back up the data before the update.

  HP customer 8.3.17.2042 Rev.A Security Manager (3 December 2015) - SP74101

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_158015_1

  Player HP encryption 8.6.16.42 Rev.A (15 June 2015) - SP71555

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_156274_1

  For units with the BCD error, you must call the HP support team and that we owe to them correct the mistake of BCD. After complete correction, you must update these software.

• Laptop HP 650 - network wireless problem

  Hello

  I have a laptop HP 650

  I installed windows 7 x 64 sp1

  I downloaded all the drivers for the HP product page

  I installed all the drivers, but I have a problem with the driver for the wireless network.

  All drivers works fine, except wireless driver.

  What can I do?

  That you help me with some advice?

  Thank you!!

  Best regards

  REMUS

  You are the very welcome.

  Here is the link for the driver you need:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 0 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-118499-1

  He was not on the support page and the driver of your laptop.

• How to configure HP ENVY 700 - 210xt to install the graphics card EVGA 650 TI boost.

  Can someone tell me how to install the graphics card EVGA 650 TI boost in the

  HP ENVY 700-210xt

  Product number: E9G99AV

  I replaced the power supply with Corsair RM 650 watt power supply that works very well. Now, I want to go to the graphics card EVGA 650 TI boost. Except, I can't get the driver to load with period of installed equipment. When I put the card into the PCI 16 x slot the computer starts with a blank screen. I pass the DVI video port old computer and the new port card white screen of same at startup. If I turn the PCIe port disabled in BIOS, it starts with the embedded video, but same thing impossible to load drivers that are not able to locate the new video card hardware. Makes me crazy! I don't know that I don't know how to configure the Bios correctly or something. Can anyone help?

  Hello:

  Please see my response to your other post on the link below.

  http://h30434.www3.HP.com/T5/desktop-hardware/how-to-configure-to-install-EVGA-650-TI-boost-video-car-in/m-p/3117171#M71438

• HP DesignJet 650 c on Windows 7 x 64 via LAN with JetDirect adapter

  Hello good people!

  I would like to know if a DesignJet 650 c (C2858B) with a JetDirect card can be installed via the LAN on a PC running Windows 7 (64 bit)? If Yes, could someone please advise on how to do it?

  Any help would be greatly appreciated.

  Thanks ~ Tim

  Yes, it's exactly the setup I have (with a JetDirect card installed in the 650 c).  Follow these steps:

  The 650 c and connect it to your router with a LAN cable.  Then, press Enter façade, then arrow down three times to get to, Enter, modular i/o of installation configuration, come in, Cfg network = NO, Enter, arrow for Yes.  At this point theCfg network = NO * reappears, it is normal.  Press previous return to main menu of status.  Then press ENTER, down arrow until you get to the utility, enter, down arrow for plot, Enter Config.  Once the plot ends at halfway in the page search for MIO, the IP address for the plotter configuration information will be available on the right side of the page.

  At this point your plotter is set up and ready, then get the driver installed on your PC.   These drivers work fine for Windows 7 x 74 (and also Windows 8 x 64) you can install the XP x 64 drivers as described in this post.

• Intermittent outages Desktop HP Pavilion p6510f - 25 Antec 430 WATT power & NVIDIA GEFORCE GTX 650

  After installing a video card and a new PSU (Antec 25 430 WATT power & NVIDIA GEFORCE GTX 650), my system has become unstable.  It worked fine for the first 3-4 hours, then had a BSOD (blue screen of death) with kernel_data_inpage_error 0000007 a and later a 000000F4 of critical failure of the process.  I did all the tests mentioned on this page but also removed and replaced the cmos battery:

  * 1137.html http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-

  All the tests passed and no problems have been found, and yet the system still does not work after 3-4 hours of use.

  So, I removed from my system and restored to its original settings.  He seems to be back to normal now (but we'll see how long).

  This experience has demoralized me.  This is because I heard other people having difficulties trying to upgrade their systems.  Looks like he has about a 50% success rate, unless you know what works from past experiences.  I think that the only way to get a system that now has good graphics is a well tested game box (PS3, XBOX or Wii).  Are there any recommended or possibly well tested configurations for this type of system that could give me the quality of a GEFORCE GTX 650 without result in a blue screen or instability for my computer?

  Because this computer comes with ATI and AMD parts, I guess that maybe to get an ATI or AMD graphics card would work?  Whatever the graphics card, the 250W power that comes with this system would probably need to be replaced.  Are there any power supplys that recommend or possibly tested?

  I realize there are a few questions in this post, but I have a more.  Is there any motherboard of analytical tools to enusre that nothing went wrong with the motherboard?  When the blue screens are produced that it seemed to make strange noises from the drive as he stole it and after the reboot it would sometimes fail to recognize the existence of the hard drive as well.  Given that all the hard drive passed (I also ran SeaTools), which leads me to believe that power is great, but I fear now that if I upgrade the power it will only cause more problems.

  A paying, customer

  Zintage

  The machine was only 2 years old.  It of a shame that it worked so well for so long and then brought by a poor diet.  It is a 750 GB Seagate Barracuda hard drive.

  I went back to the power supply and the video card, cut my losses and buy a 1 TB drive.  I cloned the old disk (on fortunately he was still working) and left on for more than 24 hours.  The system is now on his feet and works as it should.  Who will be last and only attempt to upgrade.

• Pro 650 G1 notebook: record internally does not win 10 update

  In Win 7, I could record internally because there was an available selection (stereo mix) other than the microphone.  After the upgrade to win 10 there is that the mic option.  How can I get it setup (stereo mix) upward again to save internally?

  I think it was either an IDT high definition or a constructed and drivers Realtek sound card, but now it just says: high definition Audio Device.

  Can anyone help?

  Pro 650 G1 notebook

  Win 10 64 company

  Thanks in advance.

  Earl

  With the help of an HP tech support help, I was able to solve the problem.  The solution was to reinstall the IDT drivers for windows 10.  Now, I have the option of stereo mix again and now allows to save in their own country.  Before I could only use the microphone that was not what I needed.

  Thank you for the great support with HP

• HP Probook 650 G1: How to disable the keys way to Probook 650 G1 running Windows 7, 64-bit

  I just bought a HP Probook G1, intel i7 650 - 4600 m, system BIOS 01.34-08/28/2015, keyboard review KBC 16.3 C version.

  ESC and F1 through F12 function keys seem to be in the Mode of action key (for example flight gives HP, F6 system information allows you to change the audio levels, etc.)- and I prefer to keep the standard functions of these keys (for shortcuts in Word and Excel, also for Express Scribe transcription software).

  I found Ctrl + Fn + the function key corresponding is workaround to achieve some (but not all) the standard functions - but which is cumbersome when used frequently. Workaround doesn't seem to work for the ESC key.

  I saw a few tips on how to disable the Mode keys on some laptops HP - eg
  http://support.HP.com/au-en/document/c02035108

  - and I have used this method on the previous laptop HP (e.g. Pavilion G6), but it does not work for this Probook. The configuration screen of the BIOS on my new machine does not seem to show the key Action Mode (or same System Configuration) as an option.

  I would be grateful for suggestions.

  Problem is now resolved, thanks to HP Technical Support phone line. Their tips were:

  * go to the BIOS Setup in the usual way (shut down, then power on, press ESC, choose F10 for Bios configuration)

  * Choose the Information System

  * arrow above to advance

  * Choose the Configuration of the device

  * Uncheck the Fn key switch

  * Save, etc.

  The corresponding option is more referred to Action Mode button for this model of HP laptop, at least not for the version of BIOS this Probook 650 G1 (worm 1.36, 25/04/2016).

• I forgot the password for PRS-650

  I seem to have forgotten the password for my PRS-650 4-digit. The reset switch does not work to reset the locking of the device. Any help would be greatly appreciated.

  Problem solved. I did a hard reset by pressing the reset for 5 seconds, then turn on/off button unit and the holding of the left page turn and buttons to zoom. I was disappointed that this information was not in the manual or in the FAQ, I even searched the results online with no luck to reset the password, I hope that this information will help someone in the future.

• ProBook 650 G2: Core i7 6600U processor is only TWO CŒURS - evolution options?

  I recently got a HP Probook 650 G2.

  I 'wanted' the Probook for her one of the last phones built with serial port RS-232 'real' on board.

  I also wanted a quad core processor and would never have dreamed that a modern range high processor would double heart.

  BUT... I was surprised that the Core i7 laptop 6600U my new computer processor is only has TWO CŒURS and the cache 4megs.

  Ugh!

  That's when I remembered that ASSUMES is synonymous of...

  Then, when I went to the site of HP to check and sure enough, all i3, i5, and i7 is all dual-core.

  The only exception was the 6820HQ i7, which is a quad core processor, 8megs of the cache and features of the integrated Intel HD Graphics 530.

  I don't know how much better the Intel HD Graphics 530 on Intel HD Graphics 520 which came with my unit.

  Can a person spend power sipping dual core i7 in a muscle stronger, bending, gulping, four hearts, 8 power + megs of processor cache?

  The CPU is socketed?

  My current motherboard accepts a processor 68xxHQ?

  Should I think with the CPU stronger than using more power than a heatsink / fan different?

  My adapter work?

  The easiest way would be to buy a NEW laptop with the card I want, but it quite late for this.

  This Probook G2 650 was not cheap, and if I go to the boss for more of $, $$$ for another laptop... Well, it wouldn't be nice.

  Your comments, suggestions, opinions, and the flames are all welcome!

  Bryan Smith

  See p. 24 of the manual here.

  Manual

  See the long list of motherboards, each of which includes a processor? You asked if the processor is nested? No, it's not and it's the end of the upgrade quest, unless you traded the motherboard. I guess just the motherboard with i7-6820HQ is going to be well over $ 1000. How about almost $1500?

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=ACF58104B267443785EDA1D549D7EFC2 & Searchin' = partnumber & SearchPN = 844346-601

  Before you throw stones at the 'simple' dual core i7 in your laptop, consider that it carries almost on par with a high range of 4th gen core quad.

  http://cpuboss.com/CPUs/Intel-Core-I7-6600U-vs-Intel-Core-I7-4850HQ

  High modern processors of range, especially in laptops, must also take account of energy consumption. Of course, a Quad Core Skylake will be still more than a beast. Video Intel 530 is a minor improvement on the 520 to the execution units, speed of clock and gflops as shown below:

  HD 520 graphics card	GT2	24	–	1050	403.2
  Graphics HD 530	GT2	24	–	1150	441.6

  The graphics of the Iris is where it begins to be significantly better.

  If find you a way to talk to the boss into something again consider the Zbook G3 series. It can be fitted with up to a Quad-Core Xeon, but even those that are welded on. It seems to be the trend. I think that power management got so delicate that it is difficult to prevent the loss of power by any sort of a processor of half-bridge and everything should be as thin as possible for consumers, even cell phones from the muscle work station.

  Post back with more questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ProBook 650 G1: '8' key is super sensitive.

  Hello!  I have a HP Probook 650 computer G1 cell phone brand new.  If I barely touch the '8' key he type the number "8" a dozen times. Or if I type with any force over a slight pressure on the rest of the keys, i8t wi8l also start typin8g the nu8mber '8 '.  Is there something I can do to lower the sensitivity of the keys on this keyboard?  This does not happen with the other keys, just the number '8 '.
  Thank you!

  Kip

  Hello

  Please check if the problem persists in Safe Mode, command prompt, Notepad. If so, please call the HP Support to get the keyboard replaced.

  Kind regards

  Vijay Anand

  HP technical support

• Satellite 300U-11V with Palm Treo 650 HotSync

  Hello

  I recently bought am and portable 300U unable to hotsync over Bluetooth with my Treo 650.
  I can transfer files between them with Bluetooth but I can't get them to Hotsync otherwise than by serial USB cable.
  I checked the 'How To' Toshiba which were for generic Tosh PC and PDA Palm T3 especially regarding the com port and transfer speed 7 but without result.

  When the hotsync/communication process starts the phone tells me to add my phone to the list of secure... devices then to check my settings!

  Thanks in advance.

  Frank

  > When the hotsync/communication process starts the phone tells me to add my phone to the list of secure... devices then to check my settings!

  Seems that there is some security restrictions. The Treo 650 is not known to me, but I recommend to check the ActivSync security options and add the Palm Treo 6 the list of secure devices.

• Bluetooth connection between Equium M70 and TREO 650 phone/PDA

  Hi all

  I have Toshiba Satellite M70-173 and come from TREO 650 phone/pda
  I want to hotsync my laptop and pda with bluetooth.
  How can I go? My laptop shows bluetooth stack, how can I activate bluetooth, what I have to buy the bluetooth adapter?

  Kindly help
  Concerning
  Maryline

  Palm based, isn't? If so, then check the HOWTO of the Toshiba Bluetooth site section:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  It lists a HowTo called "HotSync over Bluetooth (TOSHIBA PC - Palm-PDA).
  It is perhaps useful to you.