ProBook 650 G2: Core i7 6600U processor is only TWO CŒURS - evolution options?

Similar Questions

• HP ProBook 650 G1: 47W HP ProBook G1 650 processor upgrade

  Hello world. Can I upgrade my i3 cpu (4000 m) on HP ProBook 650 G1 (D9S33AV) HM87 chipset with the I7-4700MQ CPU 47W PDT?

  In Bios Version: 01.22 has is added support for the Intel I7-4800QM processor (I think MQ).

  HP ProBook 640 G1, G1 645, 650 G1, and 655 G1 Notebook PC - Maintenance and Service Guide October 1, 2015 I rely for Intel™ Core® i7-4802MQ 2.70 GHz processor (FSB 1600 MHz, 6: 0 - MB L3 cache, quad core, 47 w. I can't find any information on this model of cpu.

  It is possible 47W TDP CPU work on this model?

  Thank you.

  I realize this thread is a few days old, but I thought I would chime. I have a 650 G1 which is originally with an i5 - 4200M and I could upgrade for the i7-4700MQ. Make sure you use a good heat when dough swapping processors and everything will be fine. I use it as it notmally would be used and my time will no more than 60 c using AS5.

• HP Probook 650 G1: How to disable the keys way to Probook 650 G1 running Windows 7, 64-bit

  I just bought a HP Probook G1, intel i7 650 - 4600 m, system BIOS 01.34-08/28/2015, keyboard review KBC 16.3 C version.

  ESC and F1 through F12 function keys seem to be in the Mode of action key (for example flight gives HP, F6 system information allows you to change the audio levels, etc.)- and I prefer to keep the standard functions of these keys (for shortcuts in Word and Excel, also for Express Scribe transcription software).

  I found Ctrl + Fn + the function key corresponding is workaround to achieve some (but not all) the standard functions - but which is cumbersome when used frequently. Workaround doesn't seem to work for the ESC key.

  I saw a few tips on how to disable the Mode keys on some laptops HP - eg
  http://support.HP.com/au-en/document/c02035108

  - and I have used this method on the previous laptop HP (e.g. Pavilion G6), but it does not work for this Probook. The configuration screen of the BIOS on my new machine does not seem to show the key Action Mode (or same System Configuration) as an option.

  I would be grateful for suggestions.

  Problem is now resolved, thanks to HP Technical Support phone line. Their tips were:

  * go to the BIOS Setup in the usual way (shut down, then power on, press ESC, choose F10 for Bios configuration)

  * Choose the Information System

  * arrow above to advance

  * Choose the Configuration of the device

  * Uncheck the Fn key switch

  * Save, etc.

  The corresponding option is more referred to Action Mode button for this model of HP laptop, at least not for the version of BIOS this Probook 650 G1 (worm 1.36, 25/04/2016).

• HP ProBook 650 G1: '8' key is super sensitive.

  Hello!  I have a HP Probook 650 computer G1 cell phone brand new.  If I barely touch the '8' key he type the number "8" a dozen times. Or if I type with any force over a slight pressure on the rest of the keys, i8t wi8l also start typin8g the nu8mber '8 '.  Is there something I can do to lower the sensitivity of the keys on this keyboard?  This does not happen with the other keys, just the number '8 '.
  Thank you!

  Kip

  Hello

  Please check if the problem persists in Safe Mode, command prompt, Notepad. If so, please call the HP Support to get the keyboard replaced.

  Kind regards

  Vijay Anand

  HP technical support

• HP ProBook 650 G1: HP 2012 W90 - A7E32AA Docking Station

  Hello

  I have recvently had my laptop re-inaged to a 64-bit version of Windows 7 (HP ProBook 650 G1).

  I use it with a HP 2012 W90 - A7E32AA Docking Station, with monitor, keyboard and mouse attached.

  Since the new image, I can't have the mouse or the keybouard to work with the docking station (the monitor does not work).

  The mouse and keyboard work when plugged directly into USB port on the laptop.

  I tried to find a suitable driver for the docking via the HP site and google, but all sources lead me in circles and eventually to nothing so far.

  I hope someone can help? The new driver may still not solve the problem, but it's a process of elimination, unless someone knows of another solution?

  Thanks in advance,

  CJW

  You should not have drivers for the docking... all USB ports on this subject are USB 3.0... Windows 7 requires a USB 3.0 driver. To the person who reimagee your hard drive installing the USB driver 3.0?

  Any part of the dock works? It loads the laptop? I see that the monitor work through the dock docking station is not dead.

  When the laptop is connected you see evidence of it in the Device Manager?

  3 USB driver for Windows 7 64-bit:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405142 & swItemId = ob_161275_1 & swEnvOid = 4060

• Update Intel® Core™ 2 Duo processor E6300.

  I have Intel® Core™ 2 Duo processor E6300 (1.86 GHz, front side bus at 1066 MHz, 2 MB Cache).
  His quiet old, so my questions are:

  1. the question of whether I should upgrade my processor or buy a new one (or another desktop computer / laptop)?
  2 and if there is a possibility of an upgrade, then can evolve this processor to the 2nd genration i3/5/7?
  3. I like to play games, and I have only 256 MB Nvidia graphics card. Can I level too? If so, then how?
  
  Thanks in advance!
  
  My office details: Compaq Presario SR1932 IT
  (Adding 2.5 GB RAM)

  rish_raj2 wrote:
  

  I have Intel® Core™ 2 Duo processor E6300 (1.86 GHz, front side bus at 1066 MHz, 2 MB Cache).
  His quiet old, so my questions are:

  1. the question of whether I should upgrade my processor or buy a new one (or another desktop computer / laptop)?  My rule of thumb is do not upgrade the processor unless the speed is almost doubled.  I don't think that the performance will be enough to justify the increased cost.

  2 and if there is a possibility of an upgrade, then can evolve this processor to the 2nd genration i3/5/7? This is supported by HP CPU upgrades: see below.

  3. I like to play games, and I have only 256 MB Nvidia graphics card. Can I level too? If so, then how?  The first thing to determine is the power of the power supply unit (PSU).  I think that it can be only 250W.  You can open the case and read the label on.  Latest maps of intermediate level require at least 400W.  So, if my guess is correct, you will need to upgrade the PSU also.  I like the graphics cards XFX, BFG, EVGA, Sapphire and PNY in that order.  I love OCZ and Corsair PSU.

  With this information, you can determine if you need to upgrade or buy a new computer.  If you decide to buy a new computer, I suggest a desktop computer for games.  They run a lot cooler.  Be sure to buy one with the power supply with the most power possible.  The PSU is the backbone of the computer.  If you have any other questions, let me know.

  Thanks in advance!
  
  My office details: Compaq Presario SR1932 IT
  (Adding 2.5 GB RAM)

  Rish_raj, welcome to the forum.

  Type of socket: 775

• HP ProBook 450 G2 Core i5 5200: HP ProBook 450 G2 Core i5 5200U 15.6 "HD 8 GB 1 TB 2GB AMD BACK is this model supports Windows 7?

  HP ProBook 450 G2 Core i5 5200U 15.6 "HD 8 GB 1 TB 2 GB AMD BACK

  I want to install the operating system windows 7 in this model and want to know is this model supports Windows 7?

  Please answer

  @AZHAR-KHAN

  Yes W8.1, W7 and W10.

  The drivers here.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6943827&swLangOid=8&swEnvOid=4058

  REO

• HP ProBook 450 G2 Core i5 5200: HP ProBook 450 G2 Core i5 5200U 15.6 "HD 8 GB 1 TB 2GB AMD BACK is this model supports Windows 7 ways

  HP ProBook 450 G2 Core i5 5200U 15.6 "HD 8 GB 1 TB 2 GB AMD BACK

  Is - this model is compatible with Windows 7?

  Please answer

  Hello:

  Yes, it's... Here is the support page for the G2 450.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6943827

• HP Probook 650 G1: G1 Probook 650 screen resolution upgrade

  Hello, I have a laptop HP Probook 650 G1 that is configured with a HD (1366 x 768) display.

  The laptop is also sold with a full HD (1920 x 1080) display.

  I want to upgrade the hd to full-hd screen resolution, and I know how to replace the screen of the laptop (it's easy).

  I find a reseller to original screen has low price for my laptop but I have some doubt about the replacement, Do You think that the full-hd screen works perfectly or there is something that I should check before?

  Hello

  Yes, it will work, but must be a good piece, which is 739998-001, as illustrated on the following Manual:

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04030196-2.PDF

  Kind regards.

• HP ProBook 650 G1: upgrade to a backlit keyboard on a laptop HP 650 G1

  Hello

  I recently bought a HP ProBook 650 G1 laptop. This model does not have a backlit keyboard and I would like to upgrade one.

  From what I've read on the internet on this laptop motherboard supports a keyboard backlit (the model is HM87 Intel) and also on a PDF detailed on the HP site describing this model it is said and I quote "Optional backlit keyboard.

  Can someone tell me which keyboard should I buy? Because I can't find online. Can you give me a reference number of the backlit keyboard for this model?

  Or a reference to a compatible model number. I guess maybe a backlit keyboard of a different model of the laptop must be compatible with mine. I found laptops with similar keyboards like mine but backlited (as hp envy 17) but I don't know if they are compatible.

  Sorry for my bad English. I hope that you will help me find a solution.

  Thank you!

  The current store (which still offers this model) does not list an optional backlit keyboard. The backlit keyboard part is not listed in the manual. It's as if they plan to offer that he decided to do not. About all you can do strip up to the motherboard and see if the header is there. Without that, it's a show-stopper. If it is there, the keyboard that would work would be a keyboard of another model of 15 inches and I don't know who it is.

• HP Probook 650 G1 - removable DVD drive?

  Hello

  I'm planning on buying a G1 650 Probook. I thought besides that remove the DVD player (or other it without it) and install an additional HARD drive in place.

  My main question is to know if the DVD drive is removable at all. In the pdf specifications I found online is not so clear the description, at least for me , see below:

  "Removable storage fixed 9." 5 mm SATA optical drive: Blu - ray ROM DVD +/-RW SuperMulti DL; DVD +/-RW SuperMulti double layer; DVD-ROM ".

  So is removable or fixed?

  In addition, if it can be removed, is it worth all the different configurations of HW on this model, or only to a small number?

  Thank you very much in advance. Can't wait to get the new laptop

  See you soon

  Juan

  Sorry to jump in.

  http://www.eBay.com/ITM/new-2nd-SATA-hard-drive-SSD-HDD-caddy-for-HP-ProBook-650-G1-645-G1-640-G1-/281226439098?PT=US_Drive_Bay_Caddies&hash=item417a66e9ba

  Under $25.

  REO

• HP ProBook 650 G1 and biometric on Windows 8.1

  Hello guys,.

  A friend currently has a problem with a laptop ProBook 650 G1 with Windows Pro 8.1 (64-bit).

  Cannot use the biometric Windows logon for reader - although this feature is natively built on this version.

  Even when the Validity Sensor driver is correctly installed (device looks OK in the Windows Device Manager), the system does not seem to detect it and this function does not appear in the account settings.

  I tried to install several other versions of the driver, nothing changes.

  In addition, the installation of HP Device Access Manager does not work.

  It displays an error near the end of the installation process, and then restore files.

  I did some research on several forums and other sites, but I have not yet found a solution.

  However, this type of connection is very useful, especially on a professional laptop.

  So I find it hard to believe that HP have never been faced with this problem before.

  Maybe one of you can help me to solve it.

  Thank you in advance.

  Problem solved by using the procedure described on this site:

  http://shangwuq.blogspot.fr/2014/10/my-HP-EliteBook-850-G1-was-preinstalled.html

  The biometric reader now appears as "validity sensors (WBF) (PID = 003f)" to the title of the type "Biometric devices" in Device Manager and fingerprint menu configuration is available as a connection option in the menu account management.

  Note: I installed the driver manually the file wbf_vfs_003f.inf.

• ProBook 450 G1 (core i5) fingerprint reader problem

  Hello

  My new Probook 450 G1 (core i5) fingerprint reader does not work in win7 64-bit. The problem is that there is a "Validity" software... "on the laptop DVD drivers and he said the fingerprint reader is not awailable or set up correctly but when I remove fingerprint driver digital original hp and let windows to find a driver to do this, the software"Validity. "... "works, but it crashes on stage"fingerprint enrollment ".

  The two drivers (hp and win7) seems fine in "Device Manager", but non of them seem to work with the software "Validity."... ", can someone tell me what is the problem?

  Do I have to use the software 'single pass' rather than the software "Validity."... » ?

  Problem solved!
  I installed "hp client security" and it solved the problem. There not even not need software "impression of validity Finder" and all you need is the finder print driver.
  PS. You must have Microsoft.net 4.5 or 4.5.1 installed before installing ' hp customer security.

• ProBook 650 G1: Docking Station compatible with HP Probook 650 G1 VBO43AA?

  I have a HP Probook 650 G1 and a dockign VBO43AA station.  The Probook docks and seems to work fine, but I can't find in the list for this Probook compatiblily.  I'm in danger of damaging the Probook using this docking station?

  N ° if you click on and the powers of the laptop and all ports operate so I see no harm to use the dock in the long term.

• I want to install c# express system my... my system config is core 2 duo processor, 1.8 ghz, 512 MB ram, 80 GB hard drive, os: xp service pack 2. What version of visual studio I'll be able to install...

  System Properties
  Core 2 duo processor
  1.8 ghz
  hard drive 80 GB
  512 MB of ram
  XP service pack 2

  Hi aneeshnirguna,

  The question you have posted is better suited to the MSDN forums.  You can post your question in the support Forums General Visual Studio .

  Hope the helps of information.