Guaranteed Toshiba HDD 200 GB - problem connecting to fingerprint

Similar Questions

• Use of guaranteed Toshiba HDD 200 on Server 2008 x 64

  Hello
  I have this problem.
  I got HDD 200 and I would use it on Windows Server 2008 x 64.

  System to recognize the unit outside but software fingerprint is unable to rum. I think that there are no drivers signed for this operating system.
  I looked on the technical reference and there is no information on the supported operating system.

  Is thare any software updated to do this drive running on Windows server 2008 x 64?

  Greetings to all,
  Stefano

  I also think drivers can be problematic.
  Toshiba doesn't generally support these operating systems and you will not be able to find any drivers for server operating system.

  Have you tried to use a similar product, but other manufacturers?

• TOSHIBA HDD STOR. E partner 750Go PA4280E - 1 HG 5 - problem with the backup software

  Hello everyone

  I recently bought an external hard drive TOSHIBA HDD STOR. E partner 750Go (PA4280E - 5 1HG) with preinstalled backup software Nero BackItUp & Essentials. Unfortunately the software does not work. When I double-click on it to start it, it starts to extract, but after a growth of 10%, there is an error message saying something like "data error".

  How can I get the software? Or where can I get new software that works?

  Thanks in advance for your help
  Aniona

  As far as I know, the software can be downloaded from Nero.com

  Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB14034U0000R01.htm

• How to open external HDD box 3.5 "320 GB Toshiba HDD?

  I have an old 3.5 "320 GB Toshiba HDD (model: http://pan2.fotovista.com/dev/2/5/00496952/l_00496952.jpg)
  (and no more warranty) I think it is broken I don't know. Because it has power and the light flashes but do not start the HD (I mean it there is no "this" sound start).

  So my question is how do I open the case to connect it directly on my PC or what I can do?

  SRY for my bad English ^^

  Hello

  Looks like a failed disk head crash HARD, etc.

  In my opinion there is not a lot of options.
  If the warranty is valid then you should visit your dealer and ask for replacement, fix, etc.

  If the warranty is not valid the dealer would not replace this part.
  What to say, in this case you can try to remove the support HARD drive (don t ask me how, I don't t have this HARD drive) and could try to connect it to a desktop PC using an IDE or SATA cable (depends on the HARD drive) to make sure if it is possible to gain access to the HARD drive

• Windows cannot be installed after replacement Toshiba HDD

  I installed Windows 7 (and Windows XP) on my laptop A42F, another manufacturer, using a DVD without problem and was used for about 18 months.

  Last week TOSHIBA MQ01ABD050 hard drive has failed and it turns out the disc has been damaged.

  I managed to save most of my data and the hard drive has been replaced by a NEW and similar (TOSHIBA MQ01ABD050) hard disk.

  Using the same DVD as the previous time I can't install windows more. I also tried other CD and DVD that worked before on other PCs and this laptop.

  I tried to install with or without created partitions.

  When booting from a CD / DVD to install Windows, it starts to load files quickly. About 80 percent, it slows down a lot and finally a page with a message (the note below is not the EXACT text):
  Windows has encountered a problem during communication with a device
  .........
  ... contact the hardware manufacturer
  Status: 0xc00000e9
  Information: unexpected IO error

  It is possible to boot from the CD and run MiniXp (or linux) and write about your new TOSHIBA MQ01ABD050 hard drive.

  My questions:
  (a) any suggestion plausible why I can't install?
  (b) has anyone seen this before?
  (c) what can I do to solve the problem?

  Any help will be appreciated

  Hi Jack

  I think it's a bad place to ask for help, even if you have replaced the HARD precedent with the Toshiba HDD drive.
  For me, it is not a HARD drive problem.

  In my view if s notebook BIOS recognizes the HARD drive correctly, then you should be able to install the system on this new HARD drive. But according to your material, some additional drivers (perhaps the drivers SATA) would be necessary, but it should be clarified with the support of laptop manufacturer.

  I think you should get in touch with the manufacturer for laptop support in order to get more details on possible solutions

• Utility Toshiba HDD Protection cannot be installed on my C50-A513 Satellite

  I have a Toshiba Satellite C50-A513 running Windows 8 x 64. I tried to download Toshiba HDD Protection three times, but every time I download and then to install it, nothing comes. Once its installed, nothing does not appear. It's like the installation bar ends but no dialog to the HARD drive protection arises. I tried to search in under MATERIAL AND AUDIO Control Panel to check if she had been properly installed but found nothing interesting there.

  Yes, I did download the right driver suitable for my laptop and that several times too just to be sure. Someone could tell me what is the problem with this and how can I make it work?

  Waiting for answer,
  Thank you!

  According to specification specifications your machine was shipped with preinstalled Win8.1 64-bit so I m wondering what exactly you do.
  Please don't get me wrong you have the machine with the latest version of the OS, but now you have problems with the old version of the OS.

  Somehow, it is not logical for me.

  In any case, I ve tried to check the download page for your machine on http://www.toshibamea.com/en/Download-Files but anyway it doesn't work properly. I assume that there is only a temporary problem so I can't check what kind of stuff is listed for download.
  Out of curiosity but have you installed driver Toshiba system first?

• Toshiba HDD Protection - Shock Sensor Driver does not work with Vista

  I have improved my Tecra M7 for Vista Ultimate last weekend and there are a number of things that do not work. It's very frustrating because I followed the procedures shown on this website diligently upgrade and will have problems.

  Can someone tell me what zip file contains the utility Toshiba HDD Protection shock as I installed everything (except the Config Free because the Zip file seems to be corrupted) and I can't find it anywhere. I noticed that when Vista was recommend the automatic updates after installation it is recommended an updated driver for the HARD disk Protection utility, but is nowhere to be seen and I can't find an installer for anywhere. Does anyone know how to handle this?

  Thank you very much

  Chris

  I don't know if it will help, but try to use the utility disk for Tecra M9 protection.

• Toshiba HDD utility to write zeros to the drive

  I have a big problem in my Toshiba HDD and I need a Toshiba HDD utility but is not. I'm sure a zero fill can solve my problem.

  Other HARD drive seagate or wester digital provides us with DOS software to solve problems, but I can find a similar software for Toshiba HDD.

  Can anyone hel me?

  Hello

  What HARD disk utility do you mean exactly?
  On the Toshiba European pilot page you can find the HDD Protection Utility but this utility would work on laptops with a HARD drive shock sensor. So if your mobile phone does not support such sensor, this utility will not working and would not protect the HARD disk

• Vista recovery disks do not display TOSHIBA HDD Recovery option

  Back to school for 4 children with laptops is a pain, he seems to be constantly before wipe them and their establishment again.

  Any ideas why the Vista recovery disks do not display TOSHIBA HARD drive recovery option?

  I made a USB key and copied all the files from a backup of the Recvery drive to it. The USB displays the TOSHIBA HDD Recovery option but calls for the disks and will not run the recovery of the USB itself. It's annoying, but at least I can still use it to recover the machine.

  I would like to be

  the problem with discs

  or

  get the USB key to retrieve by using its own files instead of asking for the disks. Vista was not created with the option to recover from USB, so maybe I can't.

  HARD drive recovery option appears not in the advanced boot menu if something has been changed or modified on the HARD disk and the flag was removed.
  For example, this may be the case if the partition has been changed, modified or if HARD drive recovery files or folder has been changed, moved, or deleted.

  In case you want to recover the computer laptop back to factory settings, you must use the recovery disk

• Do not have "Toshiba HDD Recovery" on Satellite U300-151 with Vista

  I have problem with Vista - it became too slow so I want to get back to factory settings.

  I went through the process described in [http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm] and then, instead of "Toshiba HDD recovery" as a last option-, I have 'Restore the full Windows operating system' which is the last one after 'comand prompt. When I click on that I get another box with warning by saying "when you reinstall windows OS reformats the hard drive and all data will be lost" and "If the preinstalled files are damaged you can use the product recovery disc (which I don't have)" and there are no other or any button except OK which I click and it just brings back me to the list "System Recovery Option"...

  I have Toshiba recovery disc creator no - it was not pre-installed when I bought computer - even if I had all the other software from toshiba.

  And I know that I can buy the recovery disk, but I don't think that pay 30 dollars for something that I should have had with the computer: and my computer is still under warranty.

  Delivered using the recovery media, you will be able to install Vista.
  Recovery image contains all of the drivers, tools and utilities, and after the installation of clean operating system, you should not install some additional software.

  Bye and good luck!

• Need TOSHIBA Recovery Wizard, but have simply on TOSHIBA HDD Recovery Tool

  Hello world!

  I bought Windows 7 Home Premium OEM SP - 1 preinstaled in Turkey with model Sattelit L675-10z. Corsica, is in Turkish,

  And as I am not Turkish I wanted to find a way to use it in Russian. Toshiba supports service in Turkey told me that they cannot help me with this, so I have instoled program Vistalizator with the Russian language.

  It has been activated Windows without problem and just "authenticity windows 7" were not working. But I had the opportunity to download all the files to update windows without notifications.

  After 6 months of work, my child is delited some .dll files that I understood and also he deleted all the windows recovery points to sistem windows recovery.

  And when I tried to use toshiba HARD drive recovery, I was surprised. Before I got the toshiba laptop with windows 7 (also satelit L series) and it was easy to recover, but http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm I'm shoked. When I try to push button 8 in the bios I have not any TOSHIBA Recovery Wizard... .i have just TOSHIBA HDD Recovery Tool the same situation with button 'Zero' in the BIOS.

  Toshiba Recovery tool do not give me a chance to recover windows fair he also wants to erase all my files in all drives.

  I have also done with Toshiba Recovery Media creator usb charger and you have find it also gives me opportunity just to clear all my files in all computers.

  but I also find there a file setenv.ini with the following parameters.
  [Commune]
  Packer = ImageX
  InstallCMD = \inst.cmd
  FactoryInstallCMD = \facinst.cmd
  PartitionSizeGB =-1
  MinPartitionSizeGB = 15
  DefaultGUILang = English
  NumLang = 1
  Hnum = R13026TE
  [Lang1]
  Lang = TRK
  OS = Windows Win 7
  ImageName = 11898XSP.swm
  ImageIndex = 2
  WinREIndex = 1
  FS = NTFS
  StartMedium = 1

  and 2 files with name boot.wim so I think I can install windows 7 without erasing all my records? and there is also possibility to choose the language?

  Or maybe I should ask toshiba company servise on help?

  Have no idea what to do. Do not want to pay for another license, do not want to lose all my files, and want to use lisansed BONE in my native language or in English.

  Or if that's not possible, I would like to get the Turkish version of windows.

  Thank you
  Natalya

  Hello Natalya

  First some facts for you. I hope that this will help you understand some important things.
  Computers notebooks are specific products of countries and every laptop on the Turkish market is actually for people who use Turk language. In other words, they will get operating system and keyboard for that language.

  Each book is available for some countries of preinstalled language and there is no way to activate a different language. If you live in Russia and use the Russian language you should get Windows7 on your language and install it on your laptop. All the necessary drivers tools and utilities can be downloaded from the Toshiba support page. Of course, to the clean OS install, you must pay for the license of Microsoft. The button down belongs to the original version (Turkish language).

  When you install the operating system using the recovery image of HARD drive you Turk language again and the problem is not solved for you. In my opinion you n t to use this image at all. You can't choose your Russian language and, in general, this recovery mage Turk is useless for you.

  My advice to you if you want to keep this notebook:
  -change the keyboard (Russian language) the nearest Toshiba service for help. they can order and exchange it for you
  -installation disk install Win7 using Microsoft original (Win7)
  -install all the necessary drivers, tools and utilities from Toshiba download page the link is on this forum page (support Top sites)

  Please read all this and let me know if you have any other questions.

• X 200 random problem blue screen

  I bought X 200 about two months ago, but after the first two weeks, he began to encounter ramdomly blue screen. Everything I did, even when I leave it open, blue screen also occurs. Today I went to Lenovo Think Center to check it out, but after having verified the dump files, they said it is a software problem casue by NETw5v32.sys and ntoskrnl.exe and suggest me to retrieve the entire system. I know a friend of mine has exactly the same problem with me, he picked up his system several times and always met blue screen. It seeems that this solution will not work. Now I wonder what happens to my X 200... Yesterday I use system upadate all my drivers, including Wifi and the BIOS. But today, I met another blue screen... What should I do now?

  One of the blue screen message:

  Product
  Windows

  Problem
  Stop unexpectedly

  Date
  5/11/2008 15:03

  Status
  Not reported

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 2052

  Files helping to describe the problem (some files may be is no longer available)
  Mini110508 - 01.dmp
  SysData. XML
  Version.txt

  Additional information about the problem
  BCCode: d1
  BCP1: 00003D 60
  BCP2: 000000FF
  BCP3: 00000000
  BCP4: 00003CE0
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Basic information of my X 200: P8400, 3 G of RAM, 2 G memory, 160 G HDD turbo...

  Thank you ~.

  following my last post.

  I have replaced mainboard (x 200), the problem is gone now... H/W recommended tests it was ok... This laptop was also randomly freeze and restart itself, as well as BSOD...

  I hope this helps.

  

• Problem connecting to the server

  Whenever I open the pictures, I get an alert that reads: 'there was a problem connecting to the server "my-server", which is another Mac on my network.

  If I close the dialogue box, Photos keeps trying to connect and it appears again a few seconds later.

  Does anyone have an idea as Photos is all this and how I can stop doing?

  No idea - don't forget we can not see you if you have details

  We do not yet have an idea what software you use or you use 'MyServer' for

  What are the versions of the operating system and Photos do you use? What is your server? How are you connected to it?

  LN

• Problem connecting to the server after moving

  Hi, I keep getting the message "there is a problem connecting to the server"192.168.0.19"etc. This happened after I moved. New ISP, new router. I have an Airport Express and a NAS connected to it. Time Machine and Icloud on the NAS. I think that the NAS has this IP address before moving. There are now 192.168.10.176. Everything works, but I get the pop up frequently.

  I look at the accounts and start but nothing. I reboot safe mode does not remove the problem. So, what can I do?

  I'm on Yosemite with MBR.

  Can you connect using the new IP address?

• There was a problem connecting to the server 'SERVER NAME' error guard appearing

  There was a problem connecting to the server 'SERVER NAME' error guard appearing even though the server is not on my current network.  I recently moved my iMac to a different location and a different network, and now he constantly tries to connect to the old server.  This message appears every 30 seconds and several of those who appear (see pictures) it's extremely frustrating because it makes the machine almost useless because I am constantly closing them.  No matter how many times I try to stop the activity monitor it it keeps reappearing, and I even tried a few terminal commands that I found online, then restarted the computer, but still had no success.  I would appreciate all the advice really.

  I hope that gives you an idea of what I got!