Guest access with a 1240AG

Similar Questions

• Guest access with ISE and WLC LWA

  Hi guys,.

  Our company try to implement access as guest with dan ISE WLC with the local Web authentication method. But there is problem that comes with the certificate. This is the scenario:

  1. the clients are trying to connect wifi with guest SSID

  2. once it connects, you can open the browser and try to open a Web page (example: cisco.com)

  3, because guests didn't connect, so this link redirect to "ISE Guest Login Page" (become): url

  https://ISE-hostname:8443/guestportal/login.action?switch_url= https://1.1.1.1/login.html&wlan=Guest&redirect=www.cisco.com/

  )

  4. If there is no Login to ISE not installed comments Page, no reliable connection of message message, but it will be fine is they "Add Exception and install the certificate".

  

  5. once the Guest Login Page will appear and you can enter their username and password.

  

  6 connection success and they will be redirected to www.cisco.com and there pop-up 1.1.1.1 (IP of the Virtual Interface WLC) with the logout button.

  The problem occur in scenario 6, after the success of the opening session, the Web page with the address and the error of certificate ISE IP to 1.1.1.1 is appear.

  

  I know that it happened when you can has no Page of Login of WLC certificate...

  My Question is, is there a way of tunneling WLC certificate to EHT? Or what we can do for ISE validate certificate WLC, invited didn't need to install the certificate WLC / root certificate before you connect to the Wifi?

  THX 4 your answer and sorry for my bad English...

  Do not mix WLC with ISE comments Portal local Web authentication. Choose one or the other. I suggest the portal + WLC CWA.

• Guest access with CWA on ISE 1.3

  Hi, we have implemented CWA for wireless using ISE. However there is a problem, the redirect URL is a name, not an IP address and public use DNS servers dhcp, so CWA scope comments does not work unless we put society DNS servers.

  Is it possible to configure ISE to send the ip address instead of the name of redirection in CWA?

  Concerning

  Yes, you can set a static NHP to use for redirection in the authz profile:

  authzprofile_staticpsnip.PNG

  

  But you'll find yourself with a cert for the user experience error unless you have IP addresses in the areas of SAN of the ISE certificate.  I guess you're unwanted by using internal DNS for the guest can resolve host PSN names correctly?

  Tim

• Guest access with CWA on ISE

  Hi community support

  We implemented just CWA for wireless using ISE. However there is a problem, the redirect URL is a name, not an IP address and public use DNS servers dhcp, so CWA scope comments does not work unless we put society DNS servers.

  so... is my question possible to configure ISE to send the ip address instead of the name of redirection in CWA?

  Thanks in advance...

  Hello Julio,.

  So far, there is no way to use the name instead of IP. ISE has always required the IP of URL redirection. To understand how to work the CWA you can see the attached PDF file.

• Sufficiently secure guest access?

  Equipment: controller 2106, 1131AG, WCS 5.1.151

  Internal users: connect to the network of 192.168.x.x as wired users. Authentication with a radius connected to the AD server. Use WPA2. Vlan1

  Users invited: to connect to the controller through web-auth, DHCP on controller, Vlan2

  Comments (in sequence) ACL rules:

  1 allow SourceIP 0.0.0.0 / 0.0.0.0 IP Destination 192.168.1.5/255.255.255.255 (firewall)

  2 refuse SourceIP 0.0.0.0 / 0.0.0.0 Destination IP 192.168.0.0/255.255.0.0

  3. allow SourceIP 0.0.0.0 / 0.0.0.0 Destination IP 0.0.0.0 / 0.0.0.0

  I understand that the suggested method for Wlan guest must be in the DMZ on a separate controller. As each location has its own firewall/internet connection I find this expensive solution, a nightmare administrative and probably exaggerated. My question is: is my pretty safe guest access with web-auth, VLANs separate and list access control?

  The reason why using as establishing s ACLs on the wlc is because it's not really work as well according to your rules. ACL is better managed on the L3 interface.

• Cannot use guest access

  On a new XAC1900 after the installation of a home network based on IP fixed, with the main computer wired and all other 8 devices connected WiFi and no problem at all, I tried to use guest access.

  I have configured the SSID with the suffix - comments and assigned a password. The SSID of the network is visible on the context of the WiFi but the connection will never be finalized.

  The device of the guest, I checked that the SSID of new comments, within its DHCP system, have not been assigned the 192.168.33.XX expected but one IP address, from 169 etc, which corresponds to a provider (not Italian), other then mine. Of course I can not access or enter any password.

  I contacted the support chat system that was very available, but unable to give a solution.

  I checked the configuration several times and reinstalled the latest firmware, but no result even manually.

  Failure is repetitive and the strange IP DHCP assigned to the Guest device is always the same (even after the days), showing that the data seem to be in the firmware. Also after firmware reinstall (verses 1.1.42.162280).

  I have no more ideas!

  Dear all, first thanks for your help. I finally found the solution. Here's how, for the benefit of third parties.

  When I configured the primary network, as always I posted, several equipment (PC, iOS dev, Iphones, portable computers ipads, etc.), fixed IPs. They were assigned in the numbering according to the IP Address of the default router 192.168.1.1. That's why from 192.168.1.2 to 192.168.1.255. I does not take any care about toggle point control DHCP on the router connectivity, and it remained empty. During today muttering I thought: Let me see if activating only not the DHCP protocol to the main network could stop the DHCP server to the SSID of comments. And that's all!  I had to explicitly enable DHCP in connectivity for the second (one guest) to exploit SSID.

  Once again thank you all

• E3200 guest access and phones

  Hi all

  Hoping someone here can help me with this problem.

  I have access as guest enabled on my router (firmware v1.0.4). E3200  Computers / laptops can connect, enter the password and use it very well.

  When I try to get a smartphone connect (tried 2 iPhones, 3 Windows phones and 2 different Android phones), they are able to connect to the network, but even after the opening, a browser, will never get to the "hotel" Cisco, landing page, allowing them to enter the guest access password and connect to.  By checking the connection on the phone settings, I see that they have acquired an IP address from 192.x.x.x correctly

  Specifically, I bought this router so that I would not give my WPA key when people came and wanted to use their phones on my network.

  Has anyone successfully got it works?

  Thanks in advance...

  Ok...  After a lot of messing around and reset the default settings, I finally got to work and can repro the problem at will.

  If the you are in a two router setup and the E3200 isn't the main router (i.e. in bridge mode), guest access will not work for smartphones.  Once I swapped the roles of my two routers (i.e. made the main router E3200), guests for Smartphone access works as expected.

  Don't know if a moderator / owner of the firmware feature reads the forums, but if you do, I consider this a bug.

• App of Smart Wi - Fi and Guest Access + Bridge Mode

  Hello!
  I put my WRT1900AC as in Bridge Mode Access Point.
  Everything is OK. But I identify some things not usable, when my router is in Bridge Mode. Such a thing is the creation of a guest for Wifi/guest access account. The Linksys App Smart WiFi offering however, but it does not work. When I put the guest access 'ON' it just stay naturally 'OFF '.
  My question: is it supposed to be the case, or it may become in the future renewed with the software?
  At the same time, I can change a lot of things with this Smart WiFi App, when my WRT1900AC is in Bridge Mode. Proven stuff: Wifi channel number change and change the filter MAC they work correctly.

  With all the Smart Wifi router when the clipping comments wireless value is disabled, because the guest network depends on DHCP for IP subnet isolation.

  Is there a way to keep all the features of the WRT1900AC and the route of a primary network. It is an advanced configuration, because you must configure a static route in your main router and configure the WRT1900AC as a router not gateway.

  Discussion of the example:

  https://community.Linksys.com/T5/access-points/configuring-multiple-routers-in-one-network/m-p/93246...

• Mode bridge E4200v2 + guest access: No DHCP IP assigned?

  New E4200v2 2.0.37.  In "Bridge Mode - DHCP" (i.e., Access Point router).  Guest access is enabled & SSID broadcast.  DHCP server is disabled, because my main Sonicwall router that provides related to major network 192.168.1.0.

  PROBLEM = PC Client can see "-comments ' fine SSID and associate with her, BUT PC does NOT receive an address IP DHCP (i.e. 192.168.33.x) so the browser login page never appears and guest access does not work.

  I'm sure it's related to DHCP.  I'm assuming that the E4200 not receives or sends the comments with the PC client DHCP packets.

  I saw guest access works on the old E4200v1 before so I know what it should look like.

  Can anyone suggest any probable cause why my E4200v2 would not be providing comments DHCP addresses in the 192.168.33.0 subnet?

  I don't have that 24 hours until I have to deploy 2 new E4200v2 at a remote site and after that it will be really hard problems because I will not be on this site.

  Thanks in advance for expert advice!

  I think I SOLVED!

  Apparently, you need to ACTIVATE the two SERVER NAT & DHCP on the E4200, * before * you switch to BRIDGE MODE.

  When I did this, access as guest - works great!  Hooray!

  I guess the E4200 needs to use these 2 services that run in the background to give the subnet access as guest & dhcp work assignments, which is a process hidden, once you're in Bridge Mode.

  Wow, Cisco should really have a section of the guide user or KB article about it.  Or at least when you click on Bridge-Mode a little pop-up asking you to ensure that these 2 pre - req for are enabled.

  I'm moving now.

• E4200: Guest access: no IP address on the routers of the waterfall

  configuration:

  2 wireless routers E4200.

  LAN - LAN connected to a cable.

  Router 1 is connected to the internet and has active DHCP.

  Router 2 is NOT connected to the internet and has disabled DHCP.

  Wireless is enabled on both of them with the same SSID.

  account/guest access is enabled on them.

  It works:

  laptop connects to normal WIFI on Router 1--> internet works (IP: 192.168.1.150)

  laptop connects to normal WIFI on Router 2--> internet works (IP: 192.168.1.150)

  laptop connects to the WIFI router 1--> internet reviews works (after the screen connection in Internet Explorer) (IP: 192.168.33.108)

  It does NOT work

  laptop connects to Router 2--> internet reviews WIFI does NOT work

  --> laptop does she not get an IP address

  ?

  When I connect to the normal Wifi on Router 2, I get an IP address from the DHCP on the Router 1

  But when I do the same with the Router 2 REVIEWS WIFI, it does not request an IP address from the Router 1

  anyone ideas?

  Thank you

  comments network only works if the router is connected with its internet port. You cannot use the network invited on the router cascading with the LAN - LAN configuration.

• Approved sponsor guest access

  I was now all day and fight a little bit. Someone at - it a doc very detailed on-site sponsor guest access approved with ISE 2.x and WLC code version 8.2.110.0.

  I went through the process of implementation of the portals to the best of my abilities. I have my users who authenticate with ISE with PEAP for Wireless Corp. so I know it works.

  How can I tell WLC/ISE which SSID I use for guest access? Also my customer get IP address, then it should be redirected?

  I get this error on the WLC:

  * apfReceiveTask: 20:37:31.136 Jun 13: % CSA-3-CLIENT_NO_ACCESS: apf_80211.c:4285 Authentication failed for the customer: c0:cc:f8:17: of: 25. ACL substitute incompatibility of AAA server.

  And I see this in splunk:

  June 13-15:50:28 10.20.0.60 June 13-15:50:28 ise01 CISE_Passed_Authentications 0000157854 4 0 15:50:28.428 2016-06-13-05:00 0006695154 5200 NOTICE Passed-authentication: authentication successful, ConfigVersionId = 90, IP = 10.20.63.14, DestinationIPAddress = 10.20.0.60, DestinationPort = 1812, UserName=C0-CC-F8-17-DE-25, Protocol = RADIUS, RequestLatency = 12, NetworkDeviceName = BNA-WLC2500-01, username is c0ccf817de25, NAS-IP-Address = 10.20.63.14, NAS-Port = 1 Type of Service = call check, Framed-MTU = 1300, Called-Station-ID=d8-b1-90-08-87-b0:TEST_GUEST, Calling-Station-ID=c0-cc-f8-17-de-25 Identify NAS = _GUEST, Acct-Session-Id = 575f1c94/c0: cc:f8:17: of: 25 / 23, NAS-Port-Type = Wireless-IEEE 802.11, Tunnel-Type =(tag=0) VLAN, Tunnel-Medium-Type =(tag=0) 802, Tunnel-Private-Group-ID =(tag=0) 142, cisco-av-pair is audit-session-id is 0a143f0e0000000f575f1c94, Airespace-Wlan-Id = 3, OriginalUserName = c0ccf817de25, NetworkDeviceProfileName = Cisco, NetworkDeviceProfileId = 8ade1f15-aef1-4a9a-8158-d02e835179db, IsThirdPartyDeviceFlow = false,

  I can't reach the SSID from my iphone... but it looks like his tent. I suppose an ACL is wrong or a policy is wrong. I think that I have trouble with the VLANs that are pushed to clients.

  Any help would be great thanks...

  Could you send a screenshot of the configuration of the radius server in the WLC (detail page please).

  Did you take a glance at the wlc/monitor clients if the ACL has been pushed for authenticated clients? What is the result?

  Thank you

• Guest access / traffic meter

  I had the AC1900 for a few months and I also use access as a guest.

  I was wondering if it was possible to limit the volume of traffic on the access of the guests?

  No, it is not possible to place any cap bandwidth on guest access.

• Select "Guest Access" router E1000

  I have a Linksys E1000 router. The firmware is 2.1.00 7 build 30 August 2010. I would like to activate or enable guest access. I had to to 192.168.1.1 and find nothing there any access asked. To the wireless tab, the choices are basic setting wireless, advanced wireless, Wireless MAC filter and setting wireless security. Tfhank you.

  I don't think that cisco connect will mess up the configuration.

  You can change the password if necessary.

  I don't think that lion is currently supported.

• Guest access password!

  I think that when I bought this router, there is a guest access password... Right?  I am such a novice to this if there is I don't know where to find it!  Someone help and thank you!

  Dian

  Did you install Cisco Connect? This is where you can administer the guest account.

• E3000 - guest access without password

  Hello

  I just installed a new E3000 wireless router and it works fine.

  But I would like to give my guests access Internet without having to enter a password.

  I know how to change the - password of comments, but it requires a minimum 4 digits password.

  Is there a way to remove it?

  Thank you

  N ° there is no way that you can remove. The least we can do is to simplify the password such as 1234 or something.