Guest account not recognize wireless networks
I try to get the guest on my Surface RT account to connect to a wireless network. So far, other accounts, such as my personal account, work very well and I can browse the internet, but when I switch to the built-in Windows 8.1 guest account, it shows that there is no network connectivity at all. In the bar of charms, I select settings and the network not available poster icon. If I select this icon to display the wireless networks, it shows that I am connected to my wireless network and it says "connected". I've disabled the Wi - Fi through this menu and reconnected, but when I use other apps, they tell me that I am not connected to the internet. Any thoughts?
Since Windows XP, guest accounts have not been allowed to initiate an Internet connection. This is a security measure, and I don't think that this is changed in Windows 8.
However, if an Internet connection is already present, the guest account can use.
So, if you want to give access to the Internet Guest account, follow these steps:
- To connect to the Internet using a classic account.
- Without disconnection, let the guest account login.
Given that the Internet connection is already in place, the guest account will be able to use it.
Tags: Windows
Similar Questions
-
Satellite L500-13z - Windows 7 does not recognize wireless network adapter
Hello
The Windows 7 RC Device Manager does not recognize my wireless network adapter (for example: Atheros, Intel or Realtek). I tried to install all the Toshiba support drivers, but none of them work:
After installation, they ask me to connect the unit to my computer (of course it is still on the motherboard!).
=>, Is there a way to know what is my Wifi adapter?
that one failed: http://aps2.toshiba-tro.de/kb0/HTD7201PO000SR01.htm (this is the only Word to say "network adapter" with a yellow exclamation point).
-Online someone knows when will be released Windows 7 drivers on the website?
Hello
Before you begin to install all drivers WLAN you can find on the Toshiba site you must make sure that wireless network card, you have exactly. You can check in the Device Manager-online properties-online Details of the local network adapter device.
Need you an information like PCI\VEN_XXXX & DEV_XXXXIf you have based this information you are looking for with these terms on this site in order to determine the exact WLAN card:
http://www.PCIDatabase.com/After that, you can download the driver appropriate for your laptop. Before installing, you must uninstall all other versions and restart the laptop.
Also, make sure that the WIFI is enabled with the hardware switch and FN + F8.Welcome them
-
Why Satellite L300-10 q does not recognize wireless network
This new laptop works well on a wired LAN but does not recognize a wireless local area network. Received the message no network found. In the same room with another PC laptop Toshiba the wireless LAN is located and has good signal strength.
The wireless LAN switch is on and the 'antenna' pictogram led burns red.Seems that it is not configured for detection. No idea how to solve this problem?
Hello
You´re sure you checked all THE settings? I mean, if the local wired network works and the wireless is enabled, you need to check all the parameters available that could be done. One idea would be to check the L300 on another access point to make sure that the problem persists on different brands of wireless routers.
Please check this first and make sure that your settings are all on "automatic" so if you do not find the reason, come back and we will try to find another solution.
Welcome them
-
Portege R100: WLAN does not recognize the network
I have a 2 year old Toshiba R100 Notebook.
It has a wireless adapter:Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter
We have tried several times and had technicians trying to connect to our WAP network office. He simply do not recognize the network and we offer all mailboxes menu to connect. It works fine on WEP networks and open.
Our network is one: -.Cisco Linksys Access Point Wireless-G with SRX, model WAP54GX
It has been suggested that I have buy a wireless card for WAP networks put in the slot of the card.
Would you agree?
If so, then that one would you recommend?
Hello
It seems that the card supports only WEP encryption and cannot handle WAP encryption that secures the WLan network.
Fact is that encryption depends on hardware and not software. This means that if the card doesn t supports the Protocol WAP for the update of the driver will not change this situation, but only a replacement card.
So I agree with you that the replacement card may solve your problem.Unfortunately, I can't give you any recommendations because I m not 100% sure what card uses the WAP protocol, but you can order the Wlan card compatible and supported by the Toshiba service partner in your country. AFAIK the guy order the Toshiba parts directly.
-
Why my Windows 7 will not find wireless networks?
My Dell with Windows 7 apparently tried to auto update and no not now recognizes wireless networks? I get the following error codes 80244022 8024001F, 8024402C, 80072ee2, 8024401 b, 80072efd HELP!
The full convenience store is no problem?
Hi Kschiess,
Welcome to the Microsoft Answers site!
You may need to set automatically detect the parameters of local area network (LAN) for Windows Update can go online to obtain updates of Internet Explorer. To do this, follow the steps below.
1. open Internet Explorer by clicking the Start button, and then click Internet Explorer.
2. click on Tools , click on Internet Options, click the connections tab, and then click LAN settings.
3. in an automatic configuration, select the check box automatically detect settings , and then click OK.
If it does not, follow the steps in the article mentioned below:
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/?kbid=836941
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Satellite Pro P300-1AY does not see wireless networks
I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
I replaced my card and it does not solve the issue.I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.
I use win XP. Any idea?
Hello
You have the latest version of the BIOS?
If this isn't the case, then you should first update the BIOS!The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
As far as I know, you must use 2.5 or later version BIOS.Check it!
-
HP Solution Center does not recognize the network printer
Network has a hp 309 a printer, can print from the computer, the problem is:
HP Solution Center not load-says incomplete installation. If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.
Question how can I get the Hp solution program to reward the network printer. If I reload the CD, then reinstall the will other people on the network of the problems?
Resettlement on your machine won't affect only you, no other machines on the network.
-
TECRA R850 - not found wireless network controller driver
Hello
I reinstalled my computer, since then it does not recognize a wireless or network device
here - after part of the result of the Toshiba Diagnostics tool
Device Manager indicates that:
"The drivers for this device are not installed. (Code 28)
There is no driver selected for the item or a set of device information.
To find a driver for this device, click Update driver.
"However I can't find the driver, after update of Windows updates, etc.
Help, please!
Thank you
lavverDate of 2013/03/15 22:55:35
[Information on PC]
Model name TECRA R850
Part number PT524E-005014BT
Serial number 4B021792H
Version of the OS Microsoft Windows 7 Professional 6.1.7600
Version of the BIOS Version 3.60
CPU Intel Core i5 - 2410M 2.30 GHz CPU
Memory8192MB physical RAM
Hard drive Capacity304, 562, 036, 736 [bytes] 283.646 [GB]
Hard drive space free Capacity126, 578, 688, 000 [bytes] 117.886 [GB]
Video version Intel(r) HD Graphics Family = 8.15.10.2291
Resolution1366 x 768 Pixels screen
Color quality, true color (32 bit)
Audio version of Realtek High Definition Audio = 6.0.1.6271
Display Audio Intel (r) version = 6.14.0.3074
Network version Intel Gigabit Network Connection = 12.2.45.0 82579V = E8:9 D MAC address: 87:EA:3 C: 21
HUAWEI Mobile Connect - 3G version of the network card = 6, 0, 1, 279 MAC address = 00:1E:10:1F:82:A7
Modem HUAWEI Mobile Connect - 3 G Modem version = 2.0.6.706
Internet Explorer9.0.8112.16421
IDE Device Hitachi HTS723232A7A364
CARPET * A DVD-RAM UJ8A2AS = 1.00 FW version[Diagnostics results]
CPU TEST DOES PASS
MEMORY TEST DID PASS
Enhanced Host Controller - 1C2D)
Enhanced Host Controller - 1 26)i.LINK TEST IS NOT FOUND
Your Tecra a card ATHEROS 802.11 (B/G/N) WB195-HMC w / BT WLAN inside and all the latest drivers you can find on the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/
Check it out please.
This is card with BT, then before you install install driver WLAN BT filter. You can find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
-
Computer can not find wireless networks
Hello
Whenever I restart my computer I have to open the part of the CPU and re services - enable Automatic Configuration Wireless for my computer to recognize networks wireless in the region. After that I then have to go to the Advanced Options in the wireless network connection properties, and then click the "use Windows to configure my wireless network. Then at that time, I can connect to my wireless router. I know that this is not normal on XP, because I've used it before, but before that I took off my computer Vista and installed XP, I had none of these problems.Thanks in advanceHave you installed the correct WIndows XP driver for your device without wire against the manufacturer (and their software that can replace software config wireless XP.)
-
Re: Satellite C660 - 29G does not detect wireless networks
Hello.
I own a SATELLITE C660 - 29 G PSC1LE, bought in Spain.
Once shaped my development pc, I installed Windosws 7 64-bit.
As I lost the DVD attached to the purchase of the laptop, I have downloaded all the drivers for my model based on the Toshiba site
I installed all the drivers and the thing is that the wireless card is most recognized. I can´t see WiFi available.
I connect to the laptop with a cable to get access to the internet and it works properly.
Could you please help me?
Thank you.You can first test what is the status of the WLAN card in Device Manager?
Wireless network adapter installed and registered correctly?If yes do not forget the wireless network card is enabled.
Please check and post comments. -
Satellite M40X-149 does not have wireless network
Hi All/person
I have a Tosh satellite M40X - 149. My problem is with the wireless operation. For about a year I used it then no problem recently the wireless from strange behavior - I would like to be connected and then she just stop and say wireless network not found then more recently the laptop has not yet locate the wireless network.
I use a Belkin F5D7633-4 wireless router and when I update the calld their Helpline, they helped me to install the firmware for the router that has seemed to work for about 10 minutes and then the problems started to come back. They recommended that I update my card drivers - can someone tell me what it is and how I do my laptop. I am desperate to solve this, because I'm having to use the yellow cable between the router and the laptop just for surfing the net.
Can someone help me?
Thank you
MarkHello
If there is no possibility try test your WLAN functionality with another network wireless (friend or maybe in your company). On this path, you should be sure if the problem occurs only with your WLAN.
Try to install the driver for your WIRELESS Intel network card. You can find it under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1847&lang=eng
-
Airport extreme will reconnect not extended wireless network
The power to my Airport Express (2nd version; 802.11n) has been inadvertently disconnected and it does not now restore for extended wireless network. I have an Airport Extreme (802.11ac) that hosts the network. I have soft, hard, and factory resets to the Express. Airport utility says that an "unexpected error occurred, try again." I have, over and over again. Airport utility finds the Express after a reset. After initial connect failure, I brought the two devices in the same room. Should I reset the extreme as well and start over? V10.11.3 OS X, v. 6.3.6 Airport utility. Thanks for your help.
At this point, I would say that you make the Express in the same room as the extreme. Go ahead and perform a reset on the only default Express. Wait for it to finish.
You should now be able to 'see' the Express in the list menu drop-down airport the two OS X menu bar and on your Mac AirPort Utility. In the menu bar is should appear as something like Apple network NNNNNN. It should appear as a Terminal AirPort Express, AirPort Utility.
If you get the message "unexpected error", check the following on your Mac:
- Make sure that IPv6 is configured for: link-local only. You can find this setting in system preferences > network > advanced > Ethernet or Wi - Fi (according to your Mac is connected to the network) > configure IPv6
- If your Mac is connected to the extreme by Ethernet, activate the Wi - Fi connector in system preferences > network
-
Satellite L500-207 will not find wireless networks
My laptop cannot identify wireless networks at all and I don't know how to fix it. Everything works fine and I'm aware wireless is turned on and anti-virus scans were clean.
First of all, the problem occurred after I have reset default DNS for the DNS to google so I wonder if this is what caused the problem.
I would be very happy any assistance that could be given in the resolution of this problem.
> My laptop cannot identify wireless networks at all and I don't know how to fix it.
Does that mean exactly? You can see your WLan or you see another WLan in the neighborhood?
If you can't see any WLan then this means that the card wireless network is not correctly enabled in this case use FN + F8 to activate the WLan.In addition, check the settings of TCP/IP to the wireless network.
In Protocol TCP/IP properties, you can find the settings as all these parameters must be set to automatically assign the IP address. -
Satellite L300D (PSLC8E) - not found wireless network
My daughter has a Satellite L300D (PSLC8E) that fails to recognize the wireless network that we have.
I installed the latest driver and the device is recognized in the Device Manager and supposed to work.
The light at the front when the witch wirelesss is moved and keys Fn8 show on also.
Other card Realtek being faulty, I am at a loss.
Hello
Maybe you could check if a WLan driver would help you to solve this annoying problem.
I read a lot of discussion on Wlan issues and especially update driver helped.Please take a look here:
http://APS2.toshiba-tro.de/WLAN/Here's the latest WLan drivers for Toshiba units.
Please consider an update of the BIOS too often older BIOS may cause problems of compatibility with WLan and should be updated too!
-
card not detected wireless network
My HP ProBook 4520 s does not detect the wireless network card. Even after installing the drivers, I get the following message...
There are currently no available and enabled wireless adapters.
Please activate the available adapters wireless before accessing this configuration utility.
Please help me with this.
Hello
It seems ONE thing missing: Atheros 802.11b/g/n wireless card
Please use it to install and after return the result:
Concerning
Maybe you are looking for
-
Whenever I click to open Firefox, I am invited by the requesting Windows user account control if I want to allow the program to make changes to my hard drive. I just want to be able to open the internet without having to confirm each time! This has h
-
volume icon keeps disappearing
volume icon keeps disappearing
-
Computer turns off automatically
Hello my Windows Vista laptop turns off automatically. This isn't a standby automatic regular, Hibernate or shutdown. The computer will just empty. When you try to turn it back on, the message that "the computer was not properly extinguished" sometim
-
Why my computer says that the HP Envy 110 is not connected?
I'm on a MacPro and the printer is connected wireless - it worked fine yesterday, but now will not print anything. I followed all the steps on the HP site, but still no joy. The printer itself works and printed a test page. I'm on Mac OS X 10.7.
-
image in SVG shows it on the Simulator, but not on the device
Hi all I put theelement in an SVG file with an image that I pick up store or the SD card. I can see the image set on the Simulator, but am not able to see it on the device. Here is the code snippet I definition of the element in the image: SVGElement