Guest systems show fiber 10g as twisted pair adapters

Similar Questions

• Satellite L30 - why system shows 224 MB only?

  Hello!

  I have a Toshiba laptop Satellite L30-114. It is written on this Web site, it has 256 MB of memory, but my system shows only 224 MB - start-Panel System).

  Why is this?

  It's because of the shared memory. More on shared memory, you can find under http://en.wikipedia.org/wiki/Shared_memory

  I recommend to extend the RAM. On this way, the device will be faster and also more memory will be reserved for faster graphics operations.

  Good bye

• RAID 5 volume is corrupted, RAW and not NTFS file systems shows now Windows can't read the Volume.

  RAID 5 volume is corrupted, files systems shows RAW and not NTFS now, Windows cannot read Volume, how do I convert to NTFS without losing data on the Volume. Raid 5 has been created by the Raid software

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information helps.

• Why use of UTP Cable more than twisted pair cable twisted pair cable STP?

  Why use of UTP Cable more than twisted pair cable twisted pair cable STP?

  Hi stuckfree,

  UTP (Unshielded Twisted Pair) cables are the most commonly used cables for ethernet connections and have a number of advantages. They rely on the effect of cancellation caused by the twisting of the pairs of wires to handle noise, which is uses more than enough for most domestic. They are also smaller than STP (shielded twisted pair) cables, which makes them easier to install, especially in bulk or in narrow spaces. They are easier to install than the sewage and do not require the presence of a ground cable. UTP cables are also cheaper than the STP cables and do not require as much maintenance, since they do not rely on an external display, and can transmit data as fast as the STP cables.

  There is a lot of information available on the web. You can use your favorite search engine to learn more on similar to that mentioned by Richard above.

• How can I remove the full name of the computer in my house windows basic.why that my system shows me on the field?

  I have a laptop computer HP with windows vista. My system shows that it is on the field.

  As I didn't join field that I don't know why he's on the field. I won't be on the field.

  so I want to remove the full computer name. How can I do so.

  Hello

  ·         When you connect to the internet from?

  ·         How do you know if your computer is on the field?

  ·         Is this a brand new computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Try it, you can select a network connection and remove it from the network and sharing Center. This should allow to forget any field that you could connect the computer.

  Method 2:

  If it is a brand-new computer nine try to reformat to get all the information system back to factory settings.

  Note: save all the important documents first.

• My reserved system shows a fragment of 5%, but do not Defrag

  My reserved system shows a fragment of 5%, but will not let me Defrag how I'm doing and I'm supposed to. When I try to defrag it won't do anything... Help, please

  Windows 7

  Original title: defragment

  Do not touch the system reserved partition, it is essential to your system and you should defragment it.

• Windows 8: optimize the disk - system: shows must be optimized (29% fragmented), but it won't work.

  New Toshiba (bought in April) - Windows 8:

  Optimize disks - C: disk fragmented hard watch OK - 0%; Recovery: shows OK - 0% fragmented; System: shows-must be optimized (29% fragmented), but it won't work. Watch 'works' for just a second, it does nothing. All drives are set to optimize automatically, but he never has. Should I be worried? What can I do?

  Hello

  I recommend you to run the check disk (chkdsk). To do this, follow the steps below:

  a. press Windows key + X.

  b. open a window prompt administration commands.

  c. at the command prompt, type the following command.

  Chkdsk volume: / f/r

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

   

  You can also follow these articles for more information:

  Optimize your hard drive

  http://Windows.Microsoft.com/en-in/Windows-8/optimize-hard-drive#1TC=T1

   

  Improve performance by optimizing your hard drive

  http://Windows.Microsoft.com/en-in/Windows-8/improve-performance-optimizing-hard-drive

  Hope this information helps. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Increase in the Allocation of disk space for the guest system

  I use v.6.5.2 from workstation.  I have a lot of excess space on the hard disk of the host system, but with hindsight I initially did not award a sufficient amount of space for the guest system. Is there a quick (and painless!) way in which I can assign storage drive increased the operating system invited without workstation removal and re-Assembly of?

  Biggar Gordon

  Houston, Texas

  If you are just looking for elements run back, I wouldn't have selected Vista for guest OS... Probably be much better to use XP Pro (SP2) than any version of Vista... On the one hand, XP uses much less space on the disk and other... You can run XP Pro (easily) on a vDisk 16-20GB... IF you're dead set on running VIsta, then get the Business edition and who perform. I would never use any of the editions home for any professional use. Windows 7 is much better than Vista (Windows 7 is commonly called "Vista done right" within the it community). I'm actually using Windows 7 Professional x 64 on two of my systems. I have a XP Pro VM on my system main for when I need either the software which is only able to turn it on, or when I need to test something. Otherwise, I stick with Win7 these days.

  Vista Home (Basic or Premium) are not exactly the wisest choice for operating systems... Especially if you work on this system...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Guest operating system show only 2 CPU on DP67BG

  I have a problem my Guest OS Windows 7 x 64 sp1 show only a 2-processor motherboard intel DP67BG.

  This is my environment

  Motherboard: Intel DP67BG (Bios 1900)
  CPU: Intel Core i7 2600
  ESXi 4.1 Build 348481

  Guest OS: Windows 7 Ultimate SP1

  1 - esxi summary screen shows 8 logical processors

  

  2 - guest OS config is selected the screen 8 processors

  

  screen 3 - properties of OS guest

  

  and the guest operating system device manager

  

  screen 4 - CPU bios motherboard selector

  

  Is - this question hypervisor or motherboard problem?

  Thank you.

  Welcome to the community,

  Windows 7 supports only 2 CPU. If you need more 2 vCPUs in the comments you will need to present the vCPUs as multi core vCPUs. See http://kb.vmware.com/kb/1010184 for more details.

  André

• my system shows an error with the disc of windows-no legend

  my xp os will be faced with a problem that shows with the legend "windows-no disk", and the error code is "exception processing message c000013 parameters 75b6bf7c 4 75b6bf7c 75bf7c".

  It's a shame that we don't know anything about your system, but it's the way things work here so I can give you some general tips about this message:

  If you mean see messages like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Some people think that people there may be to not to use the device safely remove feature (and maybe), but I never use Safely Remove Hardware with external USB devices and I don't have this message for you if you can't understand it and other things work very well, you can tell XP simply can't show this message when there is no reason.

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• I ran virus scan on system showing a Trojan horse in windows\system32\services.exe. How to fix without vista windows dvd?

  Analysis anti-virus AVG shows a Trojan horse in the windows\system32\services.exe file.

  Without re - installed home premum of windows vista how can fix you it?

  I decided to reinstall windows to return to the system clean.

  Thank you all for the advice.

  Hello

  If AVG has found, it must delete or quarantine it.

  Have you asked in the AVG Forums, because it's their program?

  http://forums.Avg.com/us-en/AVG-forums?sec=theme&Act=show&ID=1

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You should also use this method;

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Health system shows two unknown devices. DevMgmt.MSC shows no

  Run the health care system, which indicates that there are two "unknown devices".

  Device Manager does not display even with the show all the selected.

  How can I get rid of this false info?

  

  OS = Windows 8 Pro, X 1 carbon touch

  Find the element of "Remind Me" small print.

  Interesting is that we should use "Remind Me" and choose "Never" get rid of the notification.

  What is important is that the problem is now resolved.

  Thank you

• System shows a friendly user with an IP address that is using dial-up. ___@___.___

  My system is showing a friendly user with an IP address that is using dial-up. I tried to delete it but am denied access. I tried a system restore, it has not removed it. Any suggestions? I also tried to use MS Essentials, he did not pick up it is. This person was also able to turn off my screen and while he was off, added the ability to save the password. I immediately made a difficult start, and this has prevented the action. But nevertheless I change my password again. I tried to locate the email support so that they can run a scan on the system and may remove these files for me. I checked the user's list, it does not appear in Control Panel.

  I thank each and everyone of you for all the helpful suggestions. I used some of them. But in the end, I simply had to reformat and reinstall. That solve all the problems with the hijacker. Had no other choice because it was this had damaged a message than even the garbage. Since the reformat everything is wonderful, with the exception of no file audio, such as published under questions. I just wanted to take the time to thank everyone for all the very useful answers. Kudo "s.

  Warm greetings,

  smallwonder703

• ESXi 5.1: can't raise Ethernet to guest system

  Hello

  I tried a very simple configuration: a single machine virtual with CentOS 6.4 (64-bit). My problem is that the ethernet does not get a link.

  There is only one card NETWORK on my system.

  VMware.log shows this when I try to put the link:

  Vim - cmd vmsvc/device.connection 19 4000 true

  2013 06-29 T 16: 24:14.619Z | VMX | I120: Request received in VMX tools to set the option "synctime"-> '0'

  2013 06-29 T 16: 24:14.622Z | VMX | I120: VMXVmdb_SetCfgState: cfgReqPath = / vm / #_VMX, vmx, cfgState, req / #11 /, remDevPath = / vm / #_VMX/vmx/vigor/setCfgStateReq / # 11 / in /.

  2013 06-29 T 16: 24:14.622Z | vCPU-0 | I120: Msg_Post: error

  2013 06-29 T 16: 24:14.622Z | vCPU-0 | I120: [msg.ethernet.openFailed] failed to initialize ethernet0.

  On the commenting system, I installed vmware tools. lsmod shows that the vmxnet driver is loaded.

  lsmod-l | grep vm

  VMCI 85329 1 vsock

  vmware_balloon 7199 0

  vmxnet 18930 0

  On the ESXi machine, I see this:

  # esxcfg - NICS - l

  Name PCI Driver link speed Duplex MAC address MTU Description

  vmnic0 0000:00:0 a. 00 forcedeth up to 1000Mbps Full 00:19:66:d4:1 c: b0 1500 nVidia Corporation nVidia NForce Network Controller

  # esxcfg - vmknic - l

  Interface Port Group/DVPort IP IP family address Netmask Broadcast MAC address MTU TSO MSS active Type

  IPv4 192.168.20.5 network management vmk0 255.255.255.224 192.168.20.31 00:19:66:d4:1 c: b0 1500 65535 true STATIC

  vmk0 networking IPv6 fe80::219:66ff:fed4:1cb0 64 00:19:66:d4:1 c: b0 1500 true 65535 STATIC, PREFERRED

  # esxcfg - vswitch - l

  Switch name Num used Ports configured Ports MTU rising ports

  128 4 128 1500 vmnic0 vSwitch0

  Name PortGroup VLAN ID used rising Ports

  The VM network 0 0 vmnic0

  0 1 vmnic0 network management

  I couldn't find useful clues so far to know what is the problem with my setup.

  Any ideas?

  Thank you.

  Frank

  > ethernet0.networkName = "ACS"

  Try "VM Network".

  Point to note: case sensitive

• Binds a guest operating system to one of the two network adapters on the host computer?

  Sorry if the topic is confusing.  I have a host operating system to Server 2008 running on a server that has two network jacks.  Allows to call an (192.168.10.24) and B (192.168.10.25).

  My guest operating system is set to bridged with the IP 192.168.10.26 mode

  I want to say VMWare to always use A NIC when it comes with this guest operating system.  Is this possible?

  In my (Control Panel Windows) network connections, I see my two NICs A and B as well as VMWare Network Adapter WMnet1 and VMnet8.

  Thank you!

  Run the utility for configuring the network (vmnetcfg.exe) as an administrator on the host computer, disable the automatic bypass, set vmnet0 to one of your physical network cards and a virtual NETWORK adapter not used, such as VMnet2, and then assign the other physical NIC. Then to your comments, change its settings and select vmnet0 or vmnet2.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.