GW instek Gall - 2303 s

Similar Questions

• Pavilion g6 2303 sh dedicated AMD Radeon HD 7670 M graphics card not detected win 7

  Hi, I have a g6 2303 sh laptop pavilion. I use win 7 x 64. I downloaded the driver for my videocard of 7670 M AMD Radeon HD hp page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=hu&cc=hu&dlc=hu&sw_lang=&product=5354...

  and after trying in vain for the amd home page. None of them does not detect my video card.

  This page only shows drivers hp for win8, which I won't use.

  Where can I find a driver for my video card?

  Thank you

  Tom

  Hi, Tom:

  Use the W7 x 64 drivers of th is model g6.  For graphics, simply use the graphics driver AMD, Intel, not one.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311

• GW INSTEK LCR819 LabVIEW Driver

  Hi everyone on the forum

  I'm looking for the driver for a GW Instek LCR 819 LabVIEW.

  I had searched the internet ther with no luck, even the seller has not

  Wonder why?

  Is currently working on the ATE to a Senor (aeronautical) oil level

  Someone used before...   LabVIEW 2012

  Best regards

  You must add a termination character to the chain of command. Normal display setting, you cannot add special characters. The value default of '-' display Codes for special characters. For example, \r for carriage return or \n for a new line. The characters of termination for your instrument are a little weird. Instead of trying to use ' \' Codes, it may be easier for you to use the string function of concantanate on the block schema to add the characters of endpoint as a string constant. I would say that this constant of string to hexadecimal display or by using an array of U8 to enter decimal/hexadecimal values, the stop character, then a byte array to a string.

  Before doing all this, have you tested the communication with a program such as Hyperterminal terminal emulation?

  Edit: I should have looked up those scan codes before you answer. A ctrl J is a newline (\n) and ctrl M CR (\r) so back to the control of the chain to '-' Codes and add \n\r. You can also try of \r\n.

• Serial with PSP Instek-603 PSU?

  Hello

  I'm trying to control a PSP Instek-603 programmable power via the built in RS-232 communication. I found a thread in the forum covering this:

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=384686&query.ID=49195#M384686

  However, my problem is not solved by the solution here. I tried all the things suggested it, but I'm still not able to read the PSP. After adjusting the settings for the characters of the termination, I was able to write to the instrument (I was able to adjust the parameters of the computer). I think it is very strange that the reading still does not work.

  Does anyone have any suggestions as to what could be the problem?

  Thanks for any help!

  Clara

  I am not an expert in serial communication, but in the quick reference Guide series (http://www.ni.com/pdf/manuals/371253a.pdf), you could see that the rs232 interface is not a constant 12VDC.

  

  You must build your own null-modem cable.  The #4 pin is connected to the + 12VDC of power.  The power I used is the cheapest available on the e-store ($ 20 - 12 VDC and 40 watts). I am ashamed to show you my cable, but this should give you an idea.

  

  Jean-Marc

• Card sim on the ACER liquid Gallant Duo E350

  Hello, the East I would like to know what type of SIM on the ACER liquid Gallant Duo E350

  I change my plan and my new operator me format a reclamo, I pose the question because the mobile is in command and sector of not in my.

  Thank you for your help.

  Hello, Hello,

  The format of the SIM on the ACER liquid Gallant Duo E350 is "2FF".

  The SIM on the E350 card form factor is "2FF".

  Best regards, thank you

• Acer liquid gallant duo, E350 and no internet

  I have a new Acer E350 liquid Gallant Duo. A SIM (vodafone) is my work and only for telephone conversations, the other that I bought is a prepaid internet SIM (AH). With both I can't get a connection to the internet. What I am doing wrong?

  Vodafone is standing for phone and messages and data, I put in AH-SIM. I copied the VPN settings, but I can't get internet connection. Phone and WIFI works.

  Anyone?

  It is resolved, AH took 5 hours to activate and after that I had to put in a new accespoint and after that it worked. (sigh)

• HP 20 2303 has: installation of Windows 7 drivers for HP 20-2303 has

  Hello all, I need to install Windows 7 32 bit on my HP 20-2303 has to control a laboratory apparatus that had this software controller that does not work on 64 bit systems. It's all good, except that I cannot now use some material elements, who are in need of drivers:

  Ethernet controller

  Network controller

  PCI device

  Encryption/Decription PCI controller

  SM Bus controller

  (USB) Universal Serial Bus controller

  I have to say that I tried linux (zorin 9 32-bit) and at least the wireless is well recognized. So, I'm sure that it must be possible. Thank you very much

  Cabrunco

  Hello:

  See if these drivers work...

  Chipset: Install the 1st listed driver and restart.  This would install the smbus and usb 3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

  Graphics card: first driver on the list.  Install and reboot.

  http://support.AMD.com/en-us/download/desktop?OS=Windows%207%20-%2032

  Audio: Accept the agreement.  Download and install the driver from the 1st on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Ethernet: 3rd driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Network controller:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4053

  PCI device: 1 driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Controller PCI encryption/Decription: this driver must be installed manually as follows...

  Download and run this driver.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_133833_1

  Go to Device Manager, and then click the controller of encryption/Decription IBOS who need the pilot.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66974.

  Make sure that the include subfolders is selected, and the driver should install.

  Then restart.

• PL-2303 USB-TO-SERIAL CABLE DRIVER FOR VISTA CANNOT INSTALL__

  INSTALLATION A SAY SUCCEEDED, BUT TYPICAL YELLOW MARK WAS STILL THERE. NEWS SAID DRIVER CAN NOT INSTALL DRIVER BECAUSE THE NAME IS ALREADY USE A SERVICE OR A NAME SERVICE DISPLAY NAME.

  Hi Rlina,

  Please check the following link about a similar problem and fix possible:

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/need-driver-for-PL-2303-USB-to-serial-port-adapter-for-HP-G6000/m-p/20798

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have Acrobat Pro 10, when I installed the CD player, it has affected the way I was able to move text boxes when I create a form of gall, he has also affected my ability to release and change the properties of the fields /, I'm I suspect m

  I have Acrobat Pro 10, when I installed the CD player, it has affected the way I was able to move text boxes when I create a form of gall, he has also affected my ability to release and change the properties of the fields /, I'm I suspect my off lucky cat Adobe support will not help , nor a cure to.  Is there a place to find updates to Acrobat 10, if I uninstall my current program?  I still have my original CD and paperwork.  Adobe acknowledge that they have created this problem.   I worked very intensively with Acrobat Pro 10 on the form for a non-profit, I do part, and it happened immediately after that I was testing a form I created in Acrobat 10 to test with CD player. Windows 7 operating system

  This is usually due to the function 'Snap to Grid' is enabled. It can be accidentally activated via the keyboard, so this may have been what happened.

• JAG inte great den sista uppdateringen vad galler Bibliotek-will be important. Hur jag for att aterga till den tidigare gor?

  JAG inte great den sista uppdateringen vad galler Bibliotek-will be important. Hur jag for att aterga till den tidigare gor?

  just after the point 1/2 towards the bottom of the page is a portal showing how to install previous versions, https://helpx.adobe.com/creative-cloud/help/download-install-app.html

• Pavilion G6 2303-TX: plugged in, do not question of burden

  After connecting the charger connected display, do not load...
  its getting charged in the stop mode.

  Hello

  Try the following.

  First, shut down the laptop, unplug the power adapter, remove the battery and then hold the Power button for 30 seconds.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the laptop, unplug the AC adapter, reinsert the battery and then reconnect the AC adapter.

  Start Notepad - Windows will automatically reinstall the driver.

  Kind regards

  DP - K

• How to make a digital gall gauge?

  Hello

  I'll draw a fuel gauge digital that calculates the exact volume of fuel in the tank. I measure the volume of fuel convert it to digital format and it interface FPGA tool and display it on LCD. I also compare the price of the fuel to the volume injected into the reservoir. If they are not equal a diode blinks, just in case, to a control fuel theft. but I do not know how to start. If someone knows about it can you please help me? I enclose my paper with this post.

  concerning

  Surya

  First, you must analyze your needs:

  (Rate, uncertainty) input rate

  Output (rate and uncertainty)

  or
  weight?

  or

  absolute volume (& temperature)

  and think about how to implement that in a car...

• HP Pavilion G6 2303-TX: update video drivers and display

  Currently, my graphics card intel laptop HD 4000 is v9.17.10.2849... but when I looked in the site to intel that they have a new v15.33 version supporting 3rd Gen Intel HD 4000... is - this security update by downloading sites intel...
  When I updated my graphics(1GB) (V14) AMD, laptop computer were previously empty for more than 2 hours and I did a restore to get back to normal...

  @vysakh_m ,

  Hello and thanks for the display on the HP support forums.

  When it comes to drivers for your system the only ones that are supported are provided on the website of hp for your system

  The actual production of the chipset drivers can have some changes or modified software.

  They provided to hp are designed for the hp hardware and are the property of material on measure for HP systems.

  Drivers HP Pavilion g6-2303tx Notebook PC

  The drivers that you find on the link I have provided are the only ones that are supported.  They are designed for hardware that was built for your system HP and the listed operating systems.  All drivers from other sources are not supported and can cause problems that are not supported.

  Worst case you could damage your hardware or end up having perform a full recovery of the system to correct what happened.

  Thanks again for posting and have a great day.  I hope that you found this information useful.

• USB to rs232 PL-2303 10 error code

  Hi all... I have a problem... "I use windows xp, I tried to install this adapter, but the first problem is that my laptop have only 3 usb and xp say the cord is connect to the 21 com, I want to see what is happening, I double click on the device, it is write" cannot start, code 10 "... What can I say? What can I do? Thank you

  Hello

  Thank you for writing to Microsoft Communities. I understand that you are facing problems with the USB drivers on the computer.

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/default.aspx/KB/943104

  Future prospects for more questions

• MySQL error: 2303(can't connect to local host)

  At the time of the installation of mysql... Oracle has been installed in my machine.when after installation I went to launch mysql, then he gave a signal and closed with the code above error may be due to port conflict, so I uninstalled the oracle and rerun the mysql, but no avail.i installed and reinstalled so many times, but no. avail... help please!

  It comes with Vista, upgrade install and activate Forum.

  Try the support of software products: http://www.mysql.com/

  See you soon.

  Mick Murphy - Microsoft partner