HA errors after HA has been disabled

Similar Questions

• Impossible to access the system restore, getting the error "system restore has been disabled by group policy.

  Recently, I was hit by a virus that, among other problems, he blocked my access to the system restore to clear it. After having had my pc repaired I can not even access the system restore or my registry. I get a message from that system restore has been disabled by group policy. It's my own pc and I am the administrator. I've tried a few things without success. I hope someone can help me with this. I have the vista operating system.

  1. click on start, run and type regedit.exe , and then press enter

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  • Delete the value DisableConfig
  • Delete the value DisableSR

  3. exit the registry editor.

  Other tips, tricks and support are available at: www.waltwachon.weebly.com

• Error Task Manager has been disabled by your administrator

  Original title; Unable to start the Task Manager

  I'll try to find the 'task manager', but every time I try to launch it I get an error message "Manager tasks has been disabled by your administrator". I am the administrator! How can I get the Task Manager to work? Thank you

  Hi Nigel,

  1. Since when are you facing the issue?

  2 have you logged on a domain?

  3. do you have a security program installed on the computer?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to run a full scan using the Microsoft Safety Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Method 2:

  If the problem persists, you can start the computer in safe mode and perform a clean boot.

  Step 1:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Hope this helps and keep us posted.

• Error: "your account has been disabled. Please, see your system administrator.

  Original title: accidentally disabled administrative account in windows XP

  When I was trying to figure out how to remove the login screen, I turned off accidentally my own admin account once I have restart my PC log on screen always there and says "your account has been disabled. see your system administrator. I don't have guest account on the computer and now I can't log on. I've tried safe mode, but could not = (.. What do I do?)

  using Windows XP Media Center Edition

  y at - it a way to get to the page of the log on screen computer management to enable administration account... Please help me.

  Hi NineFoxes,

  1. have you tried to connect to the same account in safe mode?
  2. do you think that user built-in in Safemode administrator account?
  3. what happens if you press Ctrl + Alt + Delete in SafeMode on the login screen?

  The built-in Administrator account cannot be disabled. We recommend that you check if there is a visible administrator in safe mode and login to the other user account admin user account.
  See disable or enable a user account

  Please provide us with more details, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• NE56R10U won't let me log on or create a new account says error my account has been disabled and see my System Manager

  I had some viruses and malware on my laptop and I decided to just wipe it off and restart. Well now its request for a user name and password and when I get it, it says incorrect sound. and when I go on administering it says that my account has been disabled and see my System Manager. Help, please

  When you install Windows on a blank disc, then you are prompted for a user name and a password. This is the account that you now use.

• Cannot run the disk error check: check the disk has been disabled by a program use system restore.

  Title: How re - enable disk check after it has been disabled?

  I used a registry repair whichremoved all system restore and disabled of the disk check points. How do I re active chkdsk as he wants me to restore which I can't?

  I used the free registry repair recommended by c-net

  original title: re enable check disk

  Hello

  Follow the steps mentioned below and check if the problem persists.
  File system (CFS) Checker
  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  To run the System File Checker tool, follow these steps:
  (a) click Startand type cmd in the box start the search.
  (b) click on cmd in the list programs, and then click run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  (c) at the command prompt, the following line and then press ENTER:
  sfc/scannow
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
  http://support.Microsoft.com/kb/929833
   
  Hope this information helps.

• Help. The CPU has been disabled by the guest operating system. Power off or reset the virtual machine. WHY?

  Greetings.

  I have a 5.5 with an operating system Red Hat 5.10 ESXi environment. The OS worked fine until a few days ago. ESXi displays the error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine. I Don t know why my server displays the error if my environment was OK. Could be a kernel problem? operating system problem?

  Ideas?

  Thanks for the help.

  Have a look here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000542

  Did you recently patch your VM? Looks like when the guest operating system runs the incorrect commands that it can have a deactivated processor.

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I need to disable a button after it has been clicked and gave birth to a model

  I have little experience writing java script, but I'm sure I need to use java script to disable a page button Add after it has been clicked and spawned assigned model. The java script that I use to build the model is as follows.

  var expTplt = getTemplate ("tpltReport");

  expTplt.spawn(2,true,false);

  This script works very well, and I have created several identical models with different names so that a specific model is launched when you click on the page button to add on a specific page in the pdf file. This is to prevent the information entered on one page are repeated on all subsequent pages that are added to the pdf. I have rename the fields on each model to achieve this.

  Given that each model has its own page button to add, with the exception of the final model, if a user clicks several times since the same page it will generate multiple identical pages and the information repeat error will occur.

  No simple solution?

  Add the following at the end of your script until the button is the one that runs the script. A read-only setting button makes this option disabled. The event was the trigger, the target is the object that raised the event... in your case, the button, regardless of the number of times he gets renamed due to the Rogue process.

  Event.Target.ReadOnly = true;

  J-

• Re: Satellite P - CD/DVD drive has been disabled after installing itunes 8

  * Help *! After installing itunes 8 my CD/DVD/RW Drive has been disabled.

  It's already happened and I've restored by removing the upper filters and lower in the Vista registry but itunes then told me "the registry settings used by the iTunes for importing and burning CDs and DVDs are missing." and I can't seem to burn anything from itunes.

  There, nobody how to restore CD/DVD/RW drive and retain full use of itunes please?

  Have you tried reinstalling iTunes?
  Reinstall the old iTunes, restart the computer and clean using CCleaner. Then, you can install the latest version of iTunes.

  If it doesn't work try to remove upper and lower filters again. Maybe you should do this after you have reinstalled iTunes.

  Finally and above all, this might be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB84026P0000R01.htm

• Cannot install the updates, receive error message: automatic updates has been disabled by the administrator, but I don't.

  Original title: How can I, as an administrator, turn on automatic updates, whenever I try, I get an error message saying that automatic updates has been disabled by the administrator.  I didn't do it, then?

  Question stands as is.

  Hello

   

  1. have you made any changes to the computer before the show?

  2. What antivirus application is installed on the computer?

  3. What are the different user accounts on the computer?

  This problem occurs if Windows Update has been disabled by one of the following settings:

  · Group Policy

  · System policy
  · Registry

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and try to install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

   

  Method 2: Try to turn on the auto update by following the steps in the link below.

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows

   

  Method 3: Turn off the antivirus application and try to download the updates and check.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Malicious software removal tool: http://www.microsoft.com/security/pc-security/malware-removal.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps!

• When I try to open the Task Manager, I got an error message that says that it has been disabled by the administrator. How to enable Task Manager?

  original title: whenever I try to open the Task Manager, I get an error message that says that it has been disabled by the administrator.  But I never turned it off.  How to enable Task Manager?

  How to enable Task Manager?

  Try the solution in one of these KB articles:

  "Task manager has been disabled by your administrator error.
    <>http://support.Microsoft.com/kb/555546 >
    <>http://support.Microsoft.com/kb/555480 >

  HTH,
  JW

• Error message: Wireless Communication has been disabled - HP OfficeJet 4620

  Hello

  I have a printer of HP OfficeJet 4620 network.

  All of a sudden the wireless light goes off, and whenever I try to turn it on by pressing the wireless button I get the followig message: "wireless communication has been disabled. Contact your network administrator or the person who set up the printer.

  If I try to access the network settings by going to the Setup Menu > network, I get the same exact error. I see it too if I try to print a network status page.

  I also tried to restore the default values, but that did not work.

  I am trying to find a way to reset it completely, but I can't find one way other than the default settings in the settings menu.

  Any help is appreciated.

  Hello

  Please check the Inbox you private message.

  Thank you!

• CPU has been disabled by the guest operating system error

  Running VMPlayer 3.1.3 version 324285 build on Windows 7 Enterprise 64 bit with 8G of memory.

  When I try to install some VMs based on Linux of ISOs, in a few seconds, I get the error:

  "The CPU has been disabled by the guest operating system. You must turn off or reset the virtual machine at this point. »

  (See also the screenshot attached)

  This happens on other ISOs based on Linux/Windows. I googled the web & VMTN, but have not found relevant

  answer my question.

  Thanks in advance

  Alex

  Hello

  What operating system is tryining install you?

  Take a minute to watch in VMware Compatibility Guide: search guest conductor /and try to upgrade to a version 3.1.4 If your system does not support the direct execution of 64-bit.

  Concerning