Half left of my screen LCD on Satellite P30 suddenly became black.

Similar Questions

• Satellite M100 suddenly white/black screen

  Dear all,

  Good evening

  Can advise what to do on my laptop. Suddenly the screen black but may be able to on, but no display or HDD led light, only power led and the Start button / stop have light.

  Thank you

  Hi Hunter

  You can try to remove the battery and unplug the AC adapter.
  Wait a bit (30 min), then reconnect the two devices.
  Again for this machine

  If this will not help you can try to connect it to external monitor to check if some pictures would appear on the second screen
  If it would not help you then I guess a serious problem of material made sure and a technician of the ASP must check hardware

• The screen on my Satellite P30 is completely broken

  I have the laptop above and a week ago the laptop fell, my partner was out with the machine in time and I don't know it fell on concreate must have rolled. Now, the screen is completely broken. What I see is a white blob, it publishes, but then I get a "disc error".

  The HARD drive does not sound good. His will required: a new full enclosure, HARD drive and screen, there are also a few other internal parts rattling as a toy for children. Could someone give me a figure of ball game?

  Thank you

  Hello

  The new parts would cost a fortune! The display is one of the expansive laptop parts.
  I think you should try to get a laptop second hand or parts.
  Perhaps you could find something on the sales platform very famous internet auction. Take a look here

• Satellite 5205-S505 - support wide screen LCD TV?

  I have a new wide screen LCD TV with a VGA port, I connected this with my old Satellite 5205-s505 via the VGA port as the second screen. But it displays 'unsupport signal' on the TV screen.

  Can someone have the answer.
  Thanks anyway.

  Hey,.

  I think that it s according to the external display what resolutions it supports.
  Normally, your computer user manual laptop, you will find a list of the supported screen resolutions and you should check this!

  I also recommend to install the last page of Toshiba display driver.

• LCD screen on my satellite phone

  The screen on my satellite failed (the top 12mm is fine but from there down, he's covered thin colored lines that mask the screen).

  I guess I need to replace it, but before ordering a new I need the part number.
  It's a 15.4 in. WXVG.

  Get the part number means remove the housings together above and below (design daft) and I prefer to do that when I have the screen.

  Nobody knows the part not - or I can find it using the serial number of the laptop on this site?

  I have no idea of what laptop, you have, but I guess you will get some correct hits search in the web for your model number and a display from your cell phone.
  You can also order a new, compatible to the authorized service provider part Toshiba in your country.

• Pavilion 22fi: HP Pavilion 22fi darker on half left

  Good day everyone!

  I got my 22fi like three years ago. His first a year and a half, the Middle below got darker as he had a circular spot. I let him rest for a few weeks, but he has always had the problem so I ignored it because I sorely need to monitor (and it's just a place anyway). After a month, half left got too dark and now it's evil in my eyes glancing a unbalanced illuminated screen.

  I suspect a backlight problem. But it's weird because once turn on the monitor, it is perfectly on the first microsecond of operation then darkens immediately. I tried changing the cables and monitors, the problem really is my 22fi.

  Thank you very much!

  

  Hi there @FranzKiernan,

  That the Forums are with you!  I understand that your screen has several areas of shadows.  I'm happy to give you a helping hand with this.

  The only thing I can suggest is to try a screen factory reset and see if there is no change.

  Press the button Auto or automatic selection on the monitor.
  Press Menu, and then select factory reset

  If this does not make a difference then it is likely that one or more of the backlight lights would have to be replaced. If this is what your choice will depend on your warranty status.  I don't think HP fix screens, but if it is under warranty it is to call such that it would be probably replaced.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Replacing the screen on the Satellite C660-2EH

  Hi, I'm looking for a replacement screen for my Satellite C660-2EH and I can't find a specific model. I could buy the generic screen come to label C660? In some I found, for example:

  http://www.laptop-power.co.UK/laptop-screens/Toshiba-compatible/satellite/series-C660/model-C660.html

  http://www.laptopscreenonline.com/Toshiba-Satellite-C660-replacement-screen-laptop-LCD-15982-p.asp

  Would appreciate any help that someone could give me on this matter, thank you!
  Zoe.

  In my view the two links are OK, and you can't do anything wrong. AFAIK all C660 models use the same LCD display with following specifications:

  Display Type - color display TFT LCD
  Size (diagonal) - 15.6 "(HD)
  Resolution - 1366 x 768
  -16:9 aspect ratio
  Type of LED lighting - light side.

  Only the difference can be a salesman or the brightness to level 8.

  When you order this use being it's HD LED screen.

  By the way: you want to exchange it only? I mean it's not so easy and if you don t have any experience with this kind of things that you should ask for help.

  Be careful about this.

• Satellite P30 - screen got vertical stripes

  Hello!

  Two problems:

  1. my Satellite P30 becomes a little old (bought in 2005), I know, but it works really well - a few hiccups of course.
  However, the lines of different colors appear vertically on the screen. It started with a single line of a few months ago and right there are now seven (10 at the most).
  The odd bit is that they appear, disappear, and reappear - some more often than others.
  I find it quite strange, and I wonder if the problem is the screen itself or if it is a motherboard / other hardware or a software problem.

  2. commissioning is slow lane. Suddenly, there is (before tha line problem described above) about four months something has changed in the startup routine.
  Before, when the "Welcome" message was shown, the screen became blavk for a second, and office appeared with the bar of tasks and shortcuts emediately. As usual.
  But some time back the time according to 'Welcome' to the desktop was OK, changed its jst a fww seconds to THREE minutes! I checked my pc for all known problems, but nothing! What is going on? The image of the desktop appears, and then three minutes before the taskbar and icons appear.

  Can someone help me?

  Best regards, Lars of the Norway

  (1) what are the lines? If these are lines of pixels, and the lines are spaced randomly, its most likely a LCD issue.

  (2) download and run BootVis. This small utility from Microsoft saves driver delays and other things during the startup.
  Download and Instructions can be found here: http://articles.techrepublic.com.com/5100-10878_11-5034622.html

• Satellite L850 - 17 k - black screen with blue dots

  Satellite L850 - 17 k black screen with blue dots see photo
  It is THE video card, can't find it.

  See photos

  If you see the same on internal and external display LCD, I presume that the video card is faulty.

• Satellite A500 - 14 k black screen internal - external monitor is ok

  Hello

  I have some problems with my computer screen laptop toshiba satellite A500 - 14 k (p / n: PSAM3E - 02Q008FR)

  Initially, the display on the screen was blurry and not stable. I had to tilt the screen to get a picture.
  But recently, I have no display at all on the laptop screen.

  However, the display is on an external source using the VGA or HDMI output. I think that the problem is not in the motherboard or graphics card, but maybe in the screen, the lcd inverter or the video cable LVDS.

  Is my correct deduction or not?

  First I'll change the cable of the LCD, but I do find the model for my laptop (dc02000ud00 p/n K000080540) at a reasonable price.

  I checked on ebay and I want to know if the cable of the LCD for toshiba satellite A505 might fit my laptop as this product

  http://CGI.eBay.fr/Toshiba-A500-A505-video-cable-6017B0201901-V000190070-/120554876390

  It is said that the cable is for satellite A500 A505 their American model. Do you think this could be compatible with my french model?

  Another issue is on the cover of RAM. I lost mine and I would like to know the reference of a new (product number)?

  The shape is like on the Toshiba PC Satellite maintenance manual I found on this site (see page 25 of the manual)

  http://Tim.ID.au/laptops/Toshiba/Satellite%20a500%20PRO%20a500.PDF

  Thank you for your answers

  > However, the view is of course an external source using the VGA or HDMI output. I think that the problem is not in the motherboard or graphics card, but maybe in the screen, the lcd inverter or the video cable, LVDS
  > Is my correct deduction or not?

  I agree with you it s not related to the graphics chip on the motherboard.
  There must be something wrong with the LCD display or a tiny part as FL inverter or similar

  In your case, I recommend you ask the authorized Toshiba partner in your country for compatible parts.
  In this case, you are always on the right side and can be 100% sure that ordered parts would be fully compatible.

• Vertical lines and darker screen on Satellite P30-109

  Hello

  I have a Satellite P30-109 running on Windows XP... But my screen is slowly becoming bad. It's getting vertical lines from the top of the screen down. In addition, the colors are much darker than before.

  But when I plug in an external display, there is no problem. So I do not think that the video card problem? He spent the period of warranty.

  TNX

  Haris

  You are right; If the same question doesn't appear on the external monitor then it s certainly not a GPU problem!

  I think it might be a problem with the LCD itself or with the small role as a FL inverter.
  I think you should communicate with ASP in your county for a check.

  Maybe if you're a lucky man, only the small part malfunctions and the replacement wouldn t be expensive.

  Good luck

• White screen on my Satellite M34-S456

  -Do not know how - I managed to reload Windows XP Professional on my Satellite M34 S456.
  I got a white screen with a blinking cursor in the top left of the screen for days.
  Try of BIOS (via F12 F2 &) & kept getting the white screen).

  Now that is reloaded. How can I know what is the problem?
  And how can I prevent or fix?

  For example, if it is a problen w / my HARD drive (I'll buy a new HARD drive) vs my CD/DVD, etc...

  Any suggestions?
  I have a feeling that the problem is not resolved, & as soon as I stop I get the blank screen again.
  FYI-I think that put the HARD drive in the freezer for the night may have been key to get there surgery - seriously.

  > - Don't know how - I managed to reload Windows XP Professional on my Satellite M34 S456.
  > I got a white screen with a blinking cursor in the top left of the screen for days.

  This symptom of the computer appears generally if the master boot record (MBR) on the hard drive is bad or damaged.
  It may happen due to the mechanical stress of HARD drive.

  I had the same problem several months ago and solved using the command: fixmbr or fixboot

  Concerning

• How to set up two monitors with screen LCD and HDTV on computer that is running Windows 7

  Issues of identity and position monitor

  I use a LCD and an HD TV on my computer. I have HDTV mounted to my left on the wall in my room and the LCD is on my desk in front of me. I have my monitor set as my main screen and HDTV as secondary. Windows identifies the HDTV as monitor 1 and my screen LCD 2. After starting the computer they work very well as they should. My problem is during the boot process. When the computer starts, it displays only the boot screen/POST on monitor 1 (HDTV) but not my main screen #2 (LCD). This is a problem when I don't have my HDTV now, I don't see the MESSAGE options. I don't want to always have my HDTV and crane my neck every time I need to change the BIOS settings or use the MESSAGE options. Is there any solution for this?

  Chris

  AMD Penom II x 4 940

  Windows 7 64 bit

  Gigabyte GA-MA770-UD3

  NVIDIA GeForce GTX 275

  DCLCD 19 "VGA monitor

  VIZIO HDTV 32 '' (hdmi) "

  Hi Darth Polizei,

  I hope that's not redundant but did you try to set your monitor 19 "as the main display?

  1. In the screen resolution window, you click the icon of the monitor that represents the secondary monitor.
  2. You click to select the "Make my main screen" check box, and then click OK.
  3. You log out of the computer.
  4. You log on to the computer.

  Please let us know.

  Thank you!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My desktop icons are moving to the left of the screen and reset of average size.

  Recently I connected to my laptop Toshiba Satellite Pro to find my desktop icons lined up on the left of the screen on the average size.

  I've always had my icons implemented as/where I want them and on small.

  After right click on the desktop, I found that the medium-sized icons is checked and the Auto Align box is also checked / I unchecked those boxes and replaced my icons where I wish it and restarted my laptop... to find the icons back to the left and back to middle size!

  I just spent about 12 hours to try to resolve this problem.
  I use XP and I started having problems as soon as I booted up.
  I tried several options.  Right-click on an empty area of the desktop, System Restore, using my free anti-virus, Avast, but nothing worked, whenever I rebooted the icons moved to the left of the screen.
  My final solution was to use a piece of free software called "Malwarebytes".
  I ran the scan quick option nd about 18 minutes, he began to identify items of malicious programs.
  In total, there were 4 pieces.  When "Malwarebytes" asked what I wanted to do, I chose 'delete '.
  I had to "reboot" before the changes have taken effect, and I am pleased to report that it does not work with gusto.
  I used 'AVAST' when I first add the problem and he found several problems on my hard drive but when I asked to remove them I received a message that the last four items could not be found.
  It seems these are ones I finally removed with "Malwarebytes".
  I loaded the latest version of AVAST because I find it does not slow down my PC and if I have other problems to suck, I'll use what I can find.
  I hope that this help those with similar problems with the icons on the desktop etc.

• Bubble like spots on the screen LCD T410

  Just noticed this a few minutes ago on my T410 (2516-CTO), there are three major tasks and three small spots on the centre-left of my screen. I tried to wipe the screen with a clean Microfiber cloth and a gentle jet of glasses cleaner on the cloth. All the dust was released, but the tasks remain. They appear only when I inspect the screen with a flashlight on dead. These tasks similar to white reflecting film-y areas, like the surface of the screen LCD is peeled off with very thin air bubbles. They seem to resemble defects under the surface - is my LCD delamination or anything else bad past?

  Doesn't look like it, they think that his 'damage' I have to pay for. I've only had this T410 for a week.

  Good news! After a long out of stock, the technician on-site, finally, came and succeeded him. Less than 15 minutes so I was looking at.