Half of the touchpad not responding completely on my G56

Similar Questions

• Satellite C50D-A-10Z - touchpad not responding after upgrade to Windows 10

  I updated Windows 10 Windows 8.1. After the update the Touchpad stops responding after a while. Is there a new driver for the laptop? I use a C50D-A-10Z.

  mine did the same EMI said that it is a bug in windows 10 who already seams to be fixed on mine

• Equium A100-027 touchpad not responding

  I have an equium a100-027 and today the touchpad was funny.
  For example, I went to move and sometimes it wouldn't be no move, moved very little, or when he moved quickly moved to around to the same place that it was before.

  I assumed that maybe it's just that my computer has been used too much memory or something. But then later, it no longer responds. I restarted my computer and the same problem, it does not move.

  Before anyone suggests, I in fact checked all the settings for it. I know there is a shortcut (fn + f9) to turn it off.
  However, I already checked and it is activated.
  I am falling quickly with this computer, six months old and already had two problems with it.

  Anyone can suggest a way to solve this problem, or should he be returned to be repaired?

  If it must be returned, how should I do this?
  I bought of Dixons, and when I came down to them with my last number, they said they have no responsibility and I had to call "the tech guy".

  This ended up being A £1.50 tech support number overcharge, which I'm not call again.
  This laptop has only 6 months, clearly under warranty. I don't have to pay who knows how much on a phone call just to get it fixed.

  Sorry if this sounds like a hangover, just in a bad mood with this computer at the minute.
  Thanks for any help! =-)

  Hello

  I see that you're desperate. Sorry to hear this story.
  But before you send this laptop to any point of service, you must reinstall the laptop with the Toshiba Recovery CD.

  This procedure will put the laptop to factory settings!

  If the touchpad does not work after reinstalling new contact ASP in your country.
  The service provider authorized in your country will be able to help you and if your warranty is valid, everything must be done for free.

  I can't believe that the appeal could cost about £1.5 because it s a common phone number.

  If you want to find the ASP please check this:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Satellite P850 138 - left button of the touchpad works most completely

  My touchpad started acting strange.

  left mouse button has stopped working completely and the right hand one worked only intermittently, and whenever I clicked on legs, be it firefox, IE, Safari, or whatever it is in the menu at the bottom such as a folder bar or whatever it is she she closed (no im not not by clicking on the red X)

  Then all of a sudden after awhile he would all start working again. This has happened twice now.
  Restart the system doesn't do nothing there just suddenly starts and stops all of a sudden, but the periods for which it occurs seems to get more time.

  Also the icon of touchpad in the corner with the cross through it has decided to turn its self on a few days ago and found out that the touchpad was disabled on its own and figured out how to re-enable.

  I know this isn't a virus as ive run lots of different anti virus on my system and I was wondering if his time to restart the computer in the store and get a replacement as ive she was only 4 months old

  Its really annoying as im a photographer and rely on this laptop for editing phot o. can someone please help :)
  My model is satellite P850 138

  Hello

  My personal opinion, you should not replace this laptop until you tried not to workarounds.
  First you don t know if its software related issue.
  The point is that if its software delivers, you could solve it easily recover the laptop using the recovery of HARD drive option.

  Please try to configure the computer laptop initial configuration using disk HARD recovery.
  Press F8-> choose fix my computer-> drive HARD recovery

  If HARD drive recovery is not available, press F12 and check if there is a HARD drive recovery option.
  After the system recovery, make sure that the touchpad and other features of the laptop.

• Install Firefox 31 point 8.1 of Windows just gives a blank screen and the error "not responding".

  31 Firefox has been installed and works perfectly on my Asus laptop under win 8.1, until this morning. I opened the browser and just got a white screen. The Task Manager showed Firefox as "not responding". I uninstalled and reinstalled Firefox twice, as an administrator, try 'reset Firefox' the second time. No change. I downloaded Firefox 29 and could install. It opens but freezes and unresponsive, as soon as I get a web address. I'm stumped, as Firefox worked perfectly until this morning. Someone had the same problem and, better yet, found a solution?

  It could be the work of one of your modules, or even add / bad-ware.
  Look through your list of modules and make sure you know what each of them is
  and what it does. In addition, to check the programs that are on your computer

  Windows: Start > Control Panel > uninstall programs.
  Mac: Open the folder "Applications".
  Linux:

  • Ubuntu unity {web link}
    
  • Xfce: Category for the Applications Menu items
  • options depends on the package and the desktop environment Manager

  Go through the list. If you find something that you do not
  know what it is, use a search on the web.

  The problems of Firefox caused by malicious software {web link}

• Storm knocked out of power; Restart the Mail "not responding". Now what?

  The storm knocked out power. When iMac is restarted, Mail App "did not." Similarly, trying to update Apps on OS X El Capitan, iTunes "is not responding." Face w / endless inaction, force them to leave. try again, force them to leave again. How do I return Mail? How do we install the updates?

  If you haven't done so already, please try first this simple step .

• NB100 - bottom of 10mm of touchpad not responding is not in Windows XP

  Hi all

  I bought the NB100 Ubuntu version and have been very happy with it.
  Because I like to tinker, I installed XP on it to see how it would compare.
  So far, I prefer the version of XP, but I have a little problem, and I don't know if it is normal that the version of Windows?

  I have install the Synaptics driver, and the touchpad works very well except for one thing.
  The pad simply does not meet a vertical movement in the bottom of 10mm or more, even if it does not meet the horizontal movement.

  It is also very well - it's as if the driver thinks that the touchpad is smaller than is it supposed to be 10mm.
  I disabled all of the advanced features of the driver, with the exception of the vertical scrolling support (and I think + I tried just turning out too).

  Also has anyone seen this problem?
  Is it possible to 'train' the driver to recognize the lower part of the cushion?

  Thank you

  Graeme

  Could at least tell me that their NB100 (XP) does the same thing?

  It's OK on the default Windows driver, so I use that for the moment, but I have which gives me all the most useful features of the Synaptics software :(

• Satellite L630 - Touchpad not responding

  Hello

  I bought a TOSHIBA Satellite L630 two days ago. Today morning, the touchpad does more (no reaction from the cursor to the actions of finger).
  Properties: Synaptics TouchPad V7.2 on PS/2 port. Property window indicates that the touchpad is in order.

  I tried to reinstall the drivers (return to the previous version, then the new update). Well all my attempts have not.
  Any iddea? (maybe a hardware issue?)

  Thanks in advance and sorry for my English :)

  Hey Buddy,

  Maybe the internal touchpad is just off...
  Press the FN + F9 key combination to turn it on.

  It work?

• HP 250 g4 laptop: Caps lock key flashes and touchpad not responding

  I need help... caps off button continues to blink or its blinks for a while then it stops and I type capital and common errors of letters in the second place, the touchpad does not when the caps lock key. And it's really frustrating as. ..

  He worked for two days and it's the same problems that happened again

• Vista displays the message "not responding".

  When I click to open programs, the program does not open and a message "not responding" appears next to the title of the program at the top of the screen. The entire screen turns off and when I try to close the program a box pops up that gives the options for "Wait for the program to answer" or "close program". When I select 'close program' a message saying "windows is looking for a response" but no answer is found and the system hangs and I can't 'restart', so I have to close the pc using the power button and open again.
  This problem occurs with any program and randomly. Some of the programmes concerned are Internet Explorer, windows Explorer, windows, windows snip tool, roxio creator 2009 and other photo gallery. It seems to happen with any program being launched and programs that have successfully launched previously.
  I searched the various help pages without success.

  Hello

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  You can paste sections mistake here (maybe even if repeated section 1 only one instance of each)
  section of error that is usually 10 lines or more.
  ---------------------------------------------------------------

  Startup programs - check these
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  ---------------------------------------------------------------

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  If no joy:

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Try runnng Chkdsk of Recovery Options
  (it of a more efficient way to manage to restart the computer and might work)

  -------------------------------------------------------

  Updated - loves of Vista drivers I do even if the problem seems fixed to the above or not.

  Watch manually the sites of the manufacturer for drivers - check the manufacturer and get these and then check the device manufacturers
  for video, sound, network card (NIC), WiFi and other device drivers specific for a still more recent.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  -------------------------------------------------------

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Rob - bicycle - Mark Twain said it is good.

• Windows Defender does not work. When I try to turn it on, I get the message "not responding".

  Original title: Windows Defender

  I have Windows Vista and my Windows Defender will activate/doesn't not work.  When I try to turn it on, it responds by saying: 'it is not responding' and stops automatically.  I tried to re - install & who did not work.  Any ideas.

  Hi lskdjfoie,
   
  What have you tried to reinstall? Windows Defender or other programs?
   
  I suggest the following steps and check.
   
  Step 1:
   
  Usually if you have a third-party security software installed, Windows Defender would not work. I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  If this does not help, I would say you scan SFC on your computer and check if Windows Defender works fine.
   
  Step 3:
   
  If none of the steps helps create a new user account and check if the problem persists.
   
  Let us know
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• various websites is send me the message "not responding" and the system

  that is, try to get to www.powerball.com/powerball/pb_numbers.asp, I get "not responding", then the system hangs for a few minutes. My hard drive seems to be active, trying to do something, and then after a few minutes I can return but can never get on the site.  I had the same problems with some mails in hotmail but not others.

  I'm on a comcast dsl cable modem/router with the enclosed telephone service. I think I found my answer by checking my network connection. The system used a network connection to broadband instead of the connection to the local network. I disabled the broaband as the main connection connection.

  Please look in my problem, no response, I would not have studied on my own.

• Satellite L655 - Touchpad not responding

  My Toshiba Satellite L655 touchpad no longer works.

  When I open the properties of the mouse > device settings, there is no entries in the devices section.

  Pointers?

  Hello

  Maybe you need to update/reinstall the driver from the touchpad again if the suggestion posted by Akuma didn t help.

  Maybe there is something wrong with the software/driver for the touchpad, so it of certainly worth a try

• Touchpad not responding

  Original title: My touchpad has an amber light on it and it won't work... I can only use a mouse. How can this be repaired? Sometimes just randomly.

  My touchpad has an amber light on it and it won't work... I can only use a mouse. How can this be repaired? Sometimes just randomly.

  Hello

  1. what version of operating system you are using?
  2. What is the number of brand and model of the laptop?
  3. do you get an error message?
  4. did you of recent changes on the computer before this problem?
  I would suggest trying the following steps and check if it helps.
   
  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

   

  In addition, it looks like the touchpad can be locked

   

  I hope this information is useful!

   

   

   

   

• HP Envy dv4 Notebook PC Touchpad not responding

  Hello

  All of a sudden I lost my touchpad. It is no longer allows her to follow my mouse movements. The power toggle button touchpad seems not too much work. I can't turn or no more. I rebooted my system a couple of times with no result. Also tried to uninstall Synaptics Pointing Device Driver and later installation of the latest version without any positive impact. Will be great if you happen to have any suggestions.

  Hello

  It is always interesting to try the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K