NB100 - bottom of 10mm of touchpad not responding is not in Windows XP

Hi all

I bought the NB100 Ubuntu version and have been very happy with it.
Because I like to tinker, I installed XP on it to see how it would compare.
So far, I prefer the version of XP, but I have a little problem, and I don't know if it is normal that the version of Windows?

I have install the Synaptics driver, and the touchpad works very well except for one thing.
The pad simply does not meet a vertical movement in the bottom of 10mm or more, even if it does not meet the horizontal movement.

It is also very well - it's as if the driver thinks that the touchpad is smaller than is it supposed to be 10mm.
I disabled all of the advanced features of the driver, with the exception of the vertical scrolling support (and I think + I tried just turning out too).

Also has anyone seen this problem?
Is it possible to 'train' the driver to recognize the lower part of the cushion?

Thank you

Graeme

Could at least tell me that their NB100 (XP) does the same thing?

It's OK on the default Windows driver, so I use that for the moment, but I have which gives me all the most useful features of the Synaptics software :(

Tags: Toshiba

Similar Questions

  • 7 caused synaptics touchpad not working Windows Update

    Hello

    I ran the windows 7 updates from last night on my laptop HP G62-373DX.  When I started my computer touchpad not working.  I went into Device Manager & it is said that the touch pad is damaged or missing.  In addition my Kaspersky anti-virus is also disabled now.  I tried to reset the device and also made a system restore back to before I was running updates.  Neither work.

    Any suggestions?

    After talking with support for some time, they suggested I run a recovery, but I could not do this without a mouse (tab would not work to get me through the options).  I don't have a mouse so I thought I'd like to borrow a & then get back in touch with technical support.  In the meantime, I decided to try & get my anti-virus online.  Not sure if this is what fixed it or what, but after I downloaded the update for my anti-virus my touchpad started working again.  Perhaps, that was blocking the installation of the new driver?  Who knows, it works fine now so fingers crossed I don't have any problems more.

  • HP Envy 17 J099nr: touchpad not working-Windows 10

    Just upgraded windows 8.1 10 last night after finally got my laptop working again (broke 2 times with perhaps years of use value) and now my touchpad does not work. It was working fine all day and now it just stopped. And if I try to go into advanced options of mouse all that he says are "control panel extension is incompatible with the version of the driver," but the stripping of everywhere I see all the drivers are up to date and does not even give me an option to update.

    BaggierGordon41

    Hello;

    Let me welcome you on the HP forums!

    I read your post on the sudden touchpad problems in Win10 and wanted to help.

    Unfortunately, Win10 forces automatically updates driver on each of us, without our knowledge and without our permission - and in this case, a work PC is suddenly 'broken '.  This could happen to you.

    You must go to settings, update & Essensials--> Windows Update.

    Then choose Advanced Options--> history to see when the updates have been applied last.  If you see one that include device drivers, who might be the problem. So, iff, you can, you should see if you can restore the drivers that are causing the problem.  Do you it by going into Device Manager, see if the wireless card is always listed and so, trying to restore the last driver update.

    And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.howtogeek.com/223864/how-to-uninstall-and-block-updates-and-drivers-on-windows-10/

    If it does not, an alternative is something known as a repair installation.  It is less destructive of all Windows recovery features and rewrites the Windows system files, leaving your apps, settings and data intact.

    To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10

    Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.html

    After that, some people have reported is that, by going in the settings of the BIOS on the main tab, by changing the Advanced setting at the base, their features returned.

    If this is not the same for the BIOS settings, or if that doesn't work, you can try to use the synaptic website touchpad drivers: http://www.synaptics.com/en/drivers.php
    Note the comment on the page to set a Restore Point before trying one of these drivers.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • the right side of the bottom bar of the touchpad stop working. pls help. I can not copy, paste, etc. pls help

    The right side of the bottom bar of the touchpad of the ACER laptop stop working.   I can not copy, paste, etc. Help, please

    Hello

    It would be best to contact the manufacturer of the laptop computer for further assistance on touchpad issues.

    Support from Acer: http://support.acer.com/us/en/default.aspx

    Hope the information is useful.

  • Satellite C50D-A-10Z - touchpad not responding after upgrade to Windows 10

    I updated Windows 10 Windows 8.1. After the update the Touchpad stops responding after a while. Is there a new driver for the laptop? I use a C50D-A-10Z.

    mine did the same EMI said that it is a bug in windows 10 who already seams to be fixed on mine

  • Status bar at the bottom of the screen will not allow

    Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

    This has happened

    Each time Firefox opened

    Hello Darryl.

    It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

    Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

    If you need help with one of your modules, you will need to contact the author.

  • Z510 touchpad not working not with select lists or menus

    I have a windows Z510 10.

    When I try to use any application wit just the touchpad and open a list item or a menu select and try to scroll down, as I scroll tht disappears. If I want to scroll a list I have to use the scroll keys or connect a mouse. This happens with thunderbird, chrome and firefox. He arrived not with windows 8.1.

    Thank you for anysgestions.

    Neal

    .

    I think that this has been resolved. I updated the driver toouchpad to the version of windows 10 and it seems to work.

  • Scrollbar on touchpad not working not

    All of a sudden, the scroll bar on the right side on my touchpad stopped responding.

    What can I do to get it working back?

    Thank you


  • Aspire E1-571 touchpad not working not

    Dear Sir, iam using aspire E1-571 laptop.it is bought on last august.but currently this touchpad not working.iam using usb mouse.please solve my problem quickly.

    Have you tried to turn the touchpad with the function key?

    FN + F7 I think

    A symbol:

  • Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1

    Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1, and I can use the cursor with a mouse. I also installed the synaptics/elantech drivers but it does not show scrollbar option in the mouse-> device settings.

    SOLUTION

    So guys after a thorough research and troubleshooting, I found that you must keep the opinion of a few things at installation time:

    Installation mode: UEFI (only) - LEGACY would create problems touchpad.

    After the installation of windows just follow the hierarchy of driver installation

    1 Intel NB_Chipset_M Baytrail-M

    2 Intel i/o driver

    then the rest of the shit.

    Note: after doing all this make sure your touchpad is active > Fn + F7

    Just wanted to if this solution came from an Executive of acer, the world would have been a better place , but in any case this is what the community is for.

    Enjoy everyone

    [private under the leadership of life]

  • Pavilion dm1 touchpad not working not

    Pavilion dm1 touchpad not working not not using windows 7 Home Edition.
    In Device Manager, I see that the external USB mouse, witch synaptic touchpad does not work.
    Can someone help me please.
    Did all the updates that are offered by HP

    Hello Terry,

    Thanks for your help but the touchpad seems to be defective.

    I use a usb mouse.

    Kind regards

  • Synaptics Touchpad not working not not on HP Pavilion 17 Notbook PC17 e048st

    Hello

    Laptop of I have a PC: HP Pavilion 17 Notbook PC17 e048st

    The touchpad not of not WORKING.

    Error requested on the United Nations Web site, I have deleted the software Synaptics PS / 2

    Touchpad doesn't WORK on HP Pavilion 17 Notbook PC17 e048st

    Thanks for helping me.

    Kind regards

    Hello
    I have a laptop: HP Pavilion 17 Notbook PC17 e048st
    The touchpad does not WORK.
    Asked by mistake on the site of the United Nations, I deleted the software / 2 Synaptics PS
    Work on the touchpad HP Pavilion 17 Notbook PC17 e048st
    Thank you for helping me.
    Kind regards

    Hello cigo,.

    Thanks for posting on the HP Forums!

    I'll try to help you with your mouse problem. To resolve this issue, try the following steps:

    1. go in Manager devices, then mouse and other pointing devices.

    2. right click on the mouse driver and select "Uninstall".

    3. restart the computer. This will force the computer to install a driver based on the detected hardware.

    This should solve the problem. Please let me know the results. Thank you!

    Mario

  • Touchpad not working not not in HP ENVY-dv6

    my laptop (HP dv6-nevy 7300ex) computer touchpad not working do not...

    After installing the new version of win 8 touchpad dead...

    I have?

    Thank you!

    Start your laptop and immediately press the ESC key to call the start menu.

    In the start menu, choose F2 for HP PC Diagnostics.

    Choose tests of components, and then choose touchpad to perform the test. post your results here in your thread. If it's a hardware failure, then the trial will notify you of that.

    Please ignore the selected system board circles. It is in another troubleshooting session earlier this year. You must choose a mouse for your question.

  • Windows 8 Touchpad not working not

    Original title: Windows 8 Touchpad issues, please help! Urgent

    Last night, I was on Chrome. I think that I accidentally pressed something on the keyboard. Something popped up on the right side of the screen. He had a few options, we were on the connection to a pc upstairs and a few other options below? No idea what it was. I accidentally clicked, now I can use only my touchpad at the sign in part of windows 8. After that I signed in I can not move the cursor. The only way that I can with a mouse, I want to use my touchpad, not a mouse :/

    Please leave suggestions on how to solve this problem.
    Thank you very much!
    Aaron
    p.s. I'm on a Toshiba Satellite C850

    Hi Aaron,

    Welcome to the Microsoft Community and thank you for the post about it.

    It seems that you can not use the keyboard of your mobile PC after you have clicked on an option when using Chrome.

    You can also check for any error in the device for the keyboard Manager and the other pointing device driver and write us. Please follow the steps below to see.

    (a) press the Windows key + X Key on desktop.
    (b) select the Device Manager.
    device of keyboard and pointing other Expand c).
    (d) check if there is no error ( ! sign) or (?) Sign ).

    I want to suggest to the following troubleshooting methods.

    Method 1: run the hardware and troubleshooting the device.

    If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    Follow the steps below:

    (a) press Windows + W together.

    (b) writing Troubleshooting in the search to the corner box and press on enter.

    (c) click the Troubleshooting .

    (d) click view all in the upper left corner.

    (e) select the options of the equipment and devices in the list.

    (f) click Next to run the hardware and devices troubleshooter.

    Method 2: update the keyboard and another pointing device driver.

    Follow the steps below:

    (a) press Windows + X key when you're at the office.
    (b) select the Device Manager.
    (c) find and double click on keyboard and another pointing device driver in the left panel of uninstall
    (d) right click on the device, and then click Update driver software.
    (e) select the software search automatically for updated driver .
    (f) restart your computer.

    If the problem persists, please try the following method.

    Method 3: Uninstall the keyboard and the other pointing device driver.

    Follow the steps to uninstall the driver.

    (a) press Windows + X key when you're at the office.
    (b) select the Device Manager.
    (c) find and double click driver keyboard and other pointing device from the left to uninstall Panel
    (d) right click on the device, and then click Uninstall.
    (e) restart your computer.

    You can download the drivers for the latest drivers from the link given here and install it. Select the download tab and select the correct computer model number.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    I hope that solves your problem, please write to us if you have any other question related to the Windows operating system Microsoft.
  • Keyboard and touchpad not working not not after reboot. Windows 8 Sony Vaio T series Ultrabook.

    My Sony Vaio T series Ultrabook running Windows 8 froze during the execution of a program. The Task Manager does not work, so I used the sidebar on the touch screen to restart. Once I had restarted, or the keyboard or the touchpad worked besides than the backlight on the keyboard. I tried to use the restore system to return a few days, but without success. In my device manager, there are yellow signs next to my keyboard and touchpad. An external mouse does not work either! After a repair, he says: my computer has problems with PnP devices. I can browse only my computer with its touch screen and it's very tedious. I need this computer to type for the school. Help, please!

    Hi Darklo,

    I suggest you follow the methods listed below. Before continuing, please answer the question below.

    (1) what is the program that you try to run?

    I suggest you to follow the below methods and check if it helps.

    Method 1: Run the hardware troubleshooter and check.

    Follow the steps to run the Troubleshooter:

    (a) press the Windows key + C on your keyboard to display the bar of charms.

    (b) type of Troubleshooting , and then click solving problems under settings.

    (c) now, type Hardware Troubleshooter in the option Search .

    (d) click on hardware store to run the troubleshooter.

    Also try to update the drivers for the keyboard and the touchpad.

    Method 2: Update drivers for the keyboard and the touchpad.

    (a)  , press the Windows key + R, type devmgmt.msc.

    (b) right click on the keyboard.

    (c) click on Properties, click the driver tab.

    (d) click the Update driver button.

    (e) click on the OK button.

    Similarly, follow the steps to update the touchpad.

    Method 3:  Run the Microsoft safety scanner.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note:

    The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

    Hope that this helps, if you have any additional questions, feel free to post. We will be happy to help you.

Maybe you are looking for

  • 62/4MEM/40000000: 0X84321b98 what does this error message mean?

    62/4MEM/40000000: 0X84321b98 what does this error message mean?

  • How can I get firefox to enable norton 360 to work?

    I upgraded to firefox 17 now my norton 360 will not work. How to get a Firefox that allows it to work?

  • Online number

    My credit card was not accepted to extend my online number, and my online number has been cancelled over the weekend. I entered the new credit card data. Can I get my number added to my account? I have already created this number as the key contact p

  • Bluetooth iPhone 6s

    I can't pair my iPhone 6 s to my MacBook Pro using bluetooth, I don't know why. Could someone help me fix this please. Thank you.

  • Xcontrol problem in exe

    I have an xcontrol with a push button. When the button is pushed there is a check whether the vi is running or not. It is, at the opening of the vi as an exe built the xcontrol always says that it is running, even if it's not! What is going on?