Touchpad not responding

Similar Questions

• Satellite C50D-A-10Z - touchpad not responding after upgrade to Windows 10

  I updated Windows 10 Windows 8.1. After the update the Touchpad stops responding after a while. Is there a new driver for the laptop? I use a C50D-A-10Z.

  mine did the same EMI said that it is a bug in windows 10 who already seams to be fixed on mine

• Equium A100-027 touchpad not responding

  I have an equium a100-027 and today the touchpad was funny.
  For example, I went to move and sometimes it wouldn't be no move, moved very little, or when he moved quickly moved to around to the same place that it was before.

  I assumed that maybe it's just that my computer has been used too much memory or something. But then later, it no longer responds. I restarted my computer and the same problem, it does not move.

  Before anyone suggests, I in fact checked all the settings for it. I know there is a shortcut (fn + f9) to turn it off.
  However, I already checked and it is activated.
  I am falling quickly with this computer, six months old and already had two problems with it.

  Anyone can suggest a way to solve this problem, or should he be returned to be repaired?

  If it must be returned, how should I do this?
  I bought of Dixons, and when I came down to them with my last number, they said they have no responsibility and I had to call "the tech guy".

  This ended up being A £1.50 tech support number overcharge, which I'm not call again.
  This laptop has only 6 months, clearly under warranty. I don't have to pay who knows how much on a phone call just to get it fixed.

  Sorry if this sounds like a hangover, just in a bad mood with this computer at the minute.
  Thanks for any help! =-)

  Hello

  I see that you're desperate. Sorry to hear this story.
  But before you send this laptop to any point of service, you must reinstall the laptop with the Toshiba Recovery CD.

  This procedure will put the laptop to factory settings!

  If the touchpad does not work after reinstalling new contact ASP in your country.
  The service provider authorized in your country will be able to help you and if your warranty is valid, everything must be done for free.

  I can't believe that the appeal could cost about £1.5 because it s a common phone number.

  If you want to find the ASP please check this:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• NB100 - bottom of 10mm of touchpad not responding is not in Windows XP

  Hi all

  I bought the NB100 Ubuntu version and have been very happy with it.
  Because I like to tinker, I installed XP on it to see how it would compare.
  So far, I prefer the version of XP, but I have a little problem, and I don't know if it is normal that the version of Windows?

  I have install the Synaptics driver, and the touchpad works very well except for one thing.
  The pad simply does not meet a vertical movement in the bottom of 10mm or more, even if it does not meet the horizontal movement.

  It is also very well - it's as if the driver thinks that the touchpad is smaller than is it supposed to be 10mm.
  I disabled all of the advanced features of the driver, with the exception of the vertical scrolling support (and I think + I tried just turning out too).

  Also has anyone seen this problem?
  Is it possible to 'train' the driver to recognize the lower part of the cushion?

  Thank you

  Graeme

  Could at least tell me that their NB100 (XP) does the same thing?

  It's OK on the default Windows driver, so I use that for the moment, but I have which gives me all the most useful features of the Synaptics software :(

• HP Envy dv4 Notebook PC Touchpad not responding

  Hello

  All of a sudden I lost my touchpad. It is no longer allows her to follow my mouse movements. The power toggle button touchpad seems not too much work. I can't turn or no more. I rebooted my system a couple of times with no result. Also tried to uninstall Synaptics Pointing Device Driver and later installation of the latest version without any positive impact. Will be great if you happen to have any suggestions.

  Hello

  It is always interesting to try the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• Satellite L630 - Touchpad not responding

  Hello

  I bought a TOSHIBA Satellite L630 two days ago. Today morning, the touchpad does more (no reaction from the cursor to the actions of finger).
  Properties: Synaptics TouchPad V7.2 on PS/2 port. Property window indicates that the touchpad is in order.

  I tried to reinstall the drivers (return to the previous version, then the new update). Well all my attempts have not.
  Any iddea? (maybe a hardware issue?)

  Thanks in advance and sorry for my English :)

  Hey Buddy,

  Maybe the internal touchpad is just off...
  Press the FN + F9 key combination to turn it on.

  It work?

• HP 250 g4 laptop: Caps lock key flashes and touchpad not responding

  I need help... caps off button continues to blink or its blinks for a while then it stops and I type capital and common errors of letters in the second place, the touchpad does not when the caps lock key. And it's really frustrating as. ..

  He worked for two days and it's the same problems that happened again

• Satellite L655 - Touchpad not responding

  My Toshiba Satellite L655 touchpad no longer works.

  When I open the properties of the mouse > device settings, there is no entries in the devices section.

  Pointers?

  Hello

  Maybe you need to update/reinstall the driver from the touchpad again if the suggestion posted by Akuma didn t help.

  Maybe there is something wrong with the software/driver for the touchpad, so it of certainly worth a try

• Half of the touchpad not responding completely on my G56

  This product usually 2-3 minutes after the opening of the laptop and when he returns to hibernation / sleep. Literally half of the touchpad is completely insensitive to gestures, tapping and the lateral and vertical movements. The other half works very well. I reinstalled the drivers from the HP website. It will fix itself if I close the lid and open it again or reset the device in the Panel of Synaptics.

  Install the latest firmware (BIOS) from here and also to install the latest drivers here for your laptop touchpad and let us know if the problem persists

• Satellite Pro U300: the cursor of the touchpad does not respond

  Cursor does not respond

  Hi dude

  Have you checked if the touchpad is probably disabled?
  You can enable and disable the touch pad by pressing FN + F9.

  In addition, it would be interesting to know if you can use the USB mouse properly.
  If more information is needed

• My keyboard and the touchpad are locked, does not respond to what it is.

  My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen!  Thanks for your help.

  Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• Touchpad not working not not in Safe Mode on NB200

  I have a NB200-10Z. With Windows XP, service pack 3. When I boot in safe mode, I have no cursor touchpad is not responding. So I can't select my name of user to proceed. If I plug in an external mouse via the USB, I have the same problem. So, it seems that a driver does not load. I would have thought that at least load the Mouse/touchpad driver.

  I had this problem since I bought this netbook in July, and even if a reconfigured support agent the netbook since then, the problem is still there. I forgot to address this issue with them in time (another major challenge took alll my attention) unfortunately.

  Any ideas? Any help would be appreciated.
  Eddie

  Hi ebyrne,

  Why is it so important that the mouse works in safe mode or to let s say why you start in safe mode?

  In my opinion, this must be a software problem. I put t know how this technician reimagee your laptop, but you can do it yourself using Toshiba recovery disc. After that, you get back factory settings and then everything should work properly! :)
  Check it!

• Equium A100-27-Flash cards not responding do not

  I have a problem with flash cards not responding is not on my laptop Satellite A100-27.
  It has been gradually getting worse for several months, period during which Windows would warn me that "Toshiba Flash Cards not responding' and invite me to look for a solution and close the program.

  This always solved the problem, but recently flash cards work while I can not, for example turn the touchpad on or off, but Windows is no longer notifying me and looking for a solution.
  The problem seems to be entirely circular, because Microsoft doesn't want to know if you bought your computer with the operating system already installed (why? Maybe they can't afford good customer!) and Toshiba offer no way at all to communicate with them directly, except at a prohibitive cost.

  I'm the only person in the world to conclude that this appalling lack of any significant customer support is a clear indication of an attitude "grass you--I'm only interested in sales and profit" and y at - it a kind soul out there that can offer the possibility of a solution?

  HI lacourtade,

  First of all keep cool!
  Why you get excited about this? These things can happen, person only and not portable is perfect. In addition, you have not tried anything yet and I think that your problem can be solved in a few minutes then listen:

  Flash cards you want to say are part of the package of added value. So you should try to reinstall the Toshiba tool and you can download the latest version here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version, remove the old first. Restart the computer, and then install the version you downloaded.

  Good luck! :)

• Touchpad not working not

  MY touchpad is not responding and pointer and keyboard do not work

  the mouse can work

  Used batteries may swell, disrupting the keyboard and trackpad.  Swelling of the chemical products bad leaks.

  You can return the system and use a Phillips screwdriver #00 to check if the battery is swollen (you list 10.6 which implies a 2010 or 2011 non - retina MBP you can open without voiding the warranty).

  If it's the swelling get to Apple store to do the entire installation, checked on the side.  Do replace the battery swells and breaks other parts such as the case itself.