Satellite L630 - Touchpad not responding

Similar Questions

• Satellite L655 - Touchpad not responding

  My Toshiba Satellite L655 touchpad no longer works.

  When I open the properties of the mouse > device settings, there is no entries in the devices section.

  Pointers?

  Hello

  Maybe you need to update/reinstall the driver from the touchpad again if the suggestion posted by Akuma didn t help.

  Maybe there is something wrong with the software/driver for the touchpad, so it of certainly worth a try

• Satellite C50D-A-10Z - touchpad not responding after upgrade to Windows 10

  I updated Windows 10 Windows 8.1. After the update the Touchpad stops responding after a while. Is there a new driver for the laptop? I use a C50D-A-10Z.

  mine did the same EMI said that it is a bug in windows 10 who already seams to be fixed on mine

• Satellite L630 WiFi not connecting

  I just bought a Satellite L630 laptop PC series and find that it does not connect to my WiFi network at home.

  The computer sees the network as being available, and when I enter my password, it tries to connect, but said then it's impossible.

  I tried the troubleshooting option, but everything he suggested was to turn off the modem and turning it back on (which I did, without result). I tried to change the various parameters of security, also without success.

  My modem/router wireless home is 3 1/2 years old (a Billion BiPAC 7402GL), so I wonder if it's compatibility problems?

  My desktop computer at home (also 3 1/2 years!) to connect without problems to my wireless home network, and my new laptop connects perfectly to the wireless network when I'm at work, so I have really no idea what is the problem.

  Any advice would be greatly appreciated!

  > My modem/router wireless home is 3 1/2 years old (a Billion BiPAC 7402GL), so I wonder if it's compatibility problems?
  It is possible

  > The computer sees the network as being available, and when I enter my password, it tries to connect, but said then it's impossible.
  This means that the WiFi network is successfully activated.
  In your case, I would check the WLan card settings first;
  I put t know this standard you are using (802 11A B G or N), but you must make sure that wireless card WLan is set to the same WLan standard that is used by the WLan router.
  Go to Device Manager-> card WLan-> properties-> Advanced tab to check these options.

  Make sure that you have selected good encryption (WEP, WPA - psk, WPA, etc.) and the correct password

• Satellite L630 does not recognize 8 or 32 GB SDHC cards running Windows7 32 bit

  I want to use a Sandisk SDHC cards in the bridge media slot.

  The manual says: "Bridge media slot allows you to easily transfer data from devices such as PDA and digital camera that uses flash memory (card Secure Digital (SD) / Secure Digital High Capacity (SDHC) / Secure Digital Extended Capacity (SDXC) / Memory Stick (MS) / Memory Stick PRO (MS PRO) //MultiMediaCard (MMC).).

  The maximum capacity of the SD memory card is 2 GB. The maximum capacity of SDHC memory cards is 32 GB. The maximum capacity of SDXC memory cards is 64 GB. »
  Why my L630 is not recognize my Sandisk MicroSDHC cards in the adapters provided in the bridge media slot. He considers SD cards rather than SDHC cards and they cannot be used.

  Card MicroSDHC operating in the media slots of bridge of a notebook from ASUS and Mac pro, but not the Toshiba L630 PSK041 037001, the problem lies in the Toshiba. It works in an on the Toshiba USB adapter.

  I reinstalled the Realtek card reader driver, but this did not help.

  How can I get the SDHC card to read in the bridge media slot? Toshiba has another driver?

  Thank you

  AFAIK the card reader in this series of mobile takes care of the multimedia suite:

  SD card, 8 MB - 2 GB
  Mini SD Card, 32 MB - 2 GB
  Micro SD memory card,
  SDHC 4 GB to 16 GB card
  MultiMediaCard,
  Card Memory Stick, 8 to 256 MB
  Memory Stick Pro, 256 MB to 2 GB card

  SDHC 32 GB are not supported.
  SDXC is not supported

• Satellite U500 - touchpad not answer me

  Hello

  Hope someone can help me... I have a Satellite U500 and it of really new as age of 2 weeks or so and suddenly the touchpad stopped to say.

  I did everything I could restart the laptop, go to the system and reinstall the factory default, install the update of it... everything I could and know that I did but still no answer... Can t he move at all and I have no external USB mouse is. =(

  Hope someone can help me here.
  Thanks for any help... ;)

  Hi Kgirl

  Please do not forget that the touchpad is not disabled. Use the FN + F9 key combination and remember the option ENABLE is activated.

• Equium A100-027 touchpad not responding

  I have an equium a100-027 and today the touchpad was funny.
  For example, I went to move and sometimes it wouldn't be no move, moved very little, or when he moved quickly moved to around to the same place that it was before.

  I assumed that maybe it's just that my computer has been used too much memory or something. But then later, it no longer responds. I restarted my computer and the same problem, it does not move.

  Before anyone suggests, I in fact checked all the settings for it. I know there is a shortcut (fn + f9) to turn it off.
  However, I already checked and it is activated.
  I am falling quickly with this computer, six months old and already had two problems with it.

  Anyone can suggest a way to solve this problem, or should he be returned to be repaired?

  If it must be returned, how should I do this?
  I bought of Dixons, and when I came down to them with my last number, they said they have no responsibility and I had to call "the tech guy".

  This ended up being A £1.50 tech support number overcharge, which I'm not call again.
  This laptop has only 6 months, clearly under warranty. I don't have to pay who knows how much on a phone call just to get it fixed.

  Sorry if this sounds like a hangover, just in a bad mood with this computer at the minute.
  Thanks for any help! =-)

  Hello

  I see that you're desperate. Sorry to hear this story.
  But before you send this laptop to any point of service, you must reinstall the laptop with the Toshiba Recovery CD.

  This procedure will put the laptop to factory settings!

  If the touchpad does not work after reinstalling new contact ASP in your country.
  The service provider authorized in your country will be able to help you and if your warranty is valid, everything must be done for free.

  I can't believe that the appeal could cost about £1.5 because it s a common phone number.

  If you want to find the ASP please check this:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Z30-B-100 satellite - enabled touchpad not working not

  I just turned on the laptop and that was trying to set up connections wifi touchpad no longer works.

  I tried the Fn + F9 key, but nothing has changed. I turned the laptop off and then on again without any result.

  I can work to plug a usb mouse but the touchpad still does not work.

  You have a solution or should I take to be repaired?

  I bought it a week ago and I just had office and antivirus installed and worked very well so far.

  Thank you

  The touchpad works in the BIOS?

  If this isn't the case, it may be a hardware problem, or it is simply disabled in the BIOS.

• NB100 - bottom of 10mm of touchpad not responding is not in Windows XP

  Hi all

  I bought the NB100 Ubuntu version and have been very happy with it.
  Because I like to tinker, I installed XP on it to see how it would compare.
  So far, I prefer the version of XP, but I have a little problem, and I don't know if it is normal that the version of Windows?

  I have install the Synaptics driver, and the touchpad works very well except for one thing.
  The pad simply does not meet a vertical movement in the bottom of 10mm or more, even if it does not meet the horizontal movement.

  It is also very well - it's as if the driver thinks that the touchpad is smaller than is it supposed to be 10mm.
  I disabled all of the advanced features of the driver, with the exception of the vertical scrolling support (and I think + I tried just turning out too).

  Also has anyone seen this problem?
  Is it possible to 'train' the driver to recognize the lower part of the cushion?

  Thank you

  Graeme

  Could at least tell me that their NB100 (XP) does the same thing?

  It's OK on the default Windows driver, so I use that for the moment, but I have which gives me all the most useful features of the Synaptics software :(

• HP Envy dv4 Notebook PC Touchpad not responding

  Hello

  All of a sudden I lost my touchpad. It is no longer allows her to follow my mouse movements. The power toggle button touchpad seems not too much work. I can't turn or no more. I rebooted my system a couple of times with no result. Also tried to uninstall Synaptics Pointing Device Driver and later installation of the latest version without any positive impact. Will be great if you happen to have any suggestions.

  Hello

  It is always interesting to try the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• HP 250 g4 laptop: Caps lock key flashes and touchpad not responding

  I need help... caps off button continues to blink or its blinks for a while then it stops and I type capital and common errors of letters in the second place, the touchpad does not when the caps lock key. And it's really frustrating as. ..

  He worked for two days and it's the same problems that happened again

• Satellite M40: Touchpad not working not properly

  I just had a problem where my dog jumped on my knee and operated something on the keyboard of my satellite M40.

  Now, whenever I try to press the button two times, I get the properties of the icon I'm hovering above. When I try to use the keyboard in Word, I get the menus to open instead of type appearing in the document.

  I can erase it with a restart, but I would like to know what happened.

  Fiona

  Hello

  It seems that the dog has changed the touchpad options ;)
  You should check the device touchpad settings in the mouse properties.
  What you can find in the control panel.
  Select the mouse and then go to the device settings tab. Then go to the synaptics touchpad settings.
  There you should find a few options you should check.

• Touchpad not responding

  Original title: My touchpad has an amber light on it and it won't work... I can only use a mouse. How can this be repaired? Sometimes just randomly.

  My touchpad has an amber light on it and it won't work... I can only use a mouse. How can this be repaired? Sometimes just randomly.

  Hello

  1. what version of operating system you are using?
  2. What is the number of brand and model of the laptop?
  3. do you get an error message?
  4. did you of recent changes on the computer before this problem?
  I would suggest trying the following steps and check if it helps.
   
  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

   

  In addition, it looks like the touchpad can be locked

   

  I hope this information is useful!

   

   

   

   

• Half of the touchpad not responding completely on my G56

  This product usually 2-3 minutes after the opening of the laptop and when he returns to hibernation / sleep. Literally half of the touchpad is completely insensitive to gestures, tapping and the lateral and vertical movements. The other half works very well. I reinstalled the drivers from the HP website. It will fix itself if I close the lid and open it again or reset the device in the Panel of Synaptics.

  Install the latest firmware (BIOS) from here and also to install the latest drivers here for your laptop touchpad and let us know if the problem persists

• Satellite Pro U300: the cursor of the touchpad does not respond

  Cursor does not respond

  Hi dude

  Have you checked if the touchpad is probably disabled?
  You can enable and disable the touch pad by pressing FN + F9.

  In addition, it would be interesting to know if you can use the USB mouse properly.
  If more information is needed