Hard disk recovery and replacement system

Similar Questions

• Pavilion a1230n w XP: Replace hard disk & recovery disks don't work

  Replace hard disk & recovery disks do not work. Create the new partition & Microsft Recovery Console ONLY the options available on the disk recovery TOOLS. Recovery of Microsoft stops at the page "Preparing the system to install Windows XP".  Pressing enter at this stage of the results in "cannot find EULA" message & turns off the computer... already old version of XP (media center) via another set of discs, but want software HP original back!

  If it starts from the cd Recovery Tools but not the recovery DVDs, then you can have a bad set. Of course, it could be laser dvd in your CD/DVD drive too. The dvd function works before reinstallation?

  Don't see them not listed in HP longer, but are available HERE for $27

• I restored a file on a hard disk newly installed using system MS Backup tool and now it is "read only".

  original title: "read only".

  I restored a file on a hard disk newly installed using system MS Backup tool and now it is "read only".  Anyone has a solution.  I use XP Professional sp3.  Thank you.

  Right click on the file > properties > uncheck Read only > apply > OK.

• My iMac OsX desktop computer had hard disk failure and needed replacement.  I lost much of my software, including all my Adobe CS6. Is it possible to download the software again if I have the serial number of June 2012?

  My iMac OsX desktop computer had hard disk failure and needed replacement.  I lost much of my software, including all my Adobe CS6. Is it possible to download the software again if I have the serial number of June 2012?

  Hi Roger

  Please follow: download Creative Suite 6 requests to re-download the software.

  Thank you

  Varun

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

  After download cannot open the hard disk C: and D: Internet Explorer 9 windows updates or no matter what follder on them by clicking twice and I opened by right clicking and open.  So I have to use him created restore point Internet explorer 9 and return to internet explorer 8 and the previous record and the problem is solved. How I overcome this problem?

  Babis

  This can be a symptom of malware on your system. Take a look at the guides below for advice in conclusion/remove the malware from your system:
  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Also: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/my-internet-explorer-has-been-hijacked-by-a-virus/f26f7291-d646-4870-864e-a31976df0011

• Satellite L850 - how to replace a HARD disk recovery partition?

  Hello.

  Toshiba laptop Satellite L850. PSKDGA-02Y012. The original HARD drive has failed in his colleagues even mobile, so we replaced the two HARD drive after you have created a recovery USB. When used to restore the operating system to original status of OOB.
  That has worked and portable runs much, but now I want to BACK the recovery partition (now only on the USB I think) for the new HARD drive.

  Simple to shrink the disk HARD C: (partition 2) on the HARD disk, but then how to transfer twhats on the USB (USB recovery stick) back on the HARD drive?

  Thanks for any help.

  Karim...

  Hello karim

  When you buy the notebook you will get it with preinstalled operating system (recovery image). Original recovery image is saved on the HARD disk on the recovery partition.
  Each owner of the laptop has option to make the backup recovery image and create recovery media. It could be the DVD or USB support. You can do this by using preinstalled Toshiba recovery media creator tool.
  This tool will create bootable recovery media that can be used for the installation of original image recovery if there is problem with the installation of image disk HARD recovery or when the drive is defective and must be replaced.

  Where the HARD drive is faulty and should be replaced or the owner of the laptop to upgrade HARD drive, you can install original image created using recovery recovery media (USB). After installing recovery image, you will have the same situation as for the first boot after the purchase of the laptop. With other words notebook will have factory settings again.

  In this case original recovery image is already copied onto the new HARD drive and you will also be able to start the installation of HARD drive recovery. There is therefore no reason to copy a recovery on HARD drive media.
  Please note: installation of HARD drive recovery works with the factory only settings.

  If you have any other questions do not hesitate to ask.

  Good luck.

• HP pavilion g6: how to restore the system using a newly installed hard disk recovery disk

  Hey, everything started when I downloaded the new Windows updates after a long period, after downloading the updates, the blue screen appeared, I restarted my laptop and since then, I get a black screen with error oxcoooooe9. I tried to run a test drive and it came with the 0303 error which means that my hard drive needs to be replaced, so I am a new hard drive and the fixed but now when I am trying to restore the system using the recovery disks that came with the laptop, it says incomplete restoration. Kindly help how do I get my system in working order. Also, I tried all 3 options on the recovery disk, still getting the same message. Help, please.

  Hello @Anky11,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the system recovery and he wanted to help!

  For starters, can you provide me with the product number and the operating system of your laptop?  You can use these links to help you find the product and the operating system:
  How can I find my model number or product number?
  Operating system Windows am I running?

  In the meantime, please consult the following documents, as they can help solve the problem for you:

  HP PC - troubleshooting (Windows 8) HP system recovery problems

  HP computers - resolution of the problems of recovery HP System (Windows 7)

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• Replacement for HP G62 hard disk recovery

  Hello

  I've seen other similar users have reported this problem but am not finding an answer that would solve my problem.  Having a laptop of HP G62-355DX under Windows 7 Home Premium, the hard drive turned be default via diagnostic codes and by calling the HP technical support to confirm.  The mfr/size of the existing hard drive is a Samsung 320.   Bought a new Seagate 1 TB of Best Buy.   I have 4 HP recovery disks.  Through the specified process for the recovery of the system, but once reached the end of it when the display shows "Preparation of recovery is complete:

  

  .. When the portable computer is restarted, it appears with the message no boot device is (and the hard drive for laptop boot option is enabled in the BIOS).

  Am stuck at this point;  supposedly, more large drives are supposed to work but is at - it a known issue?  I've seen references to one for different situations in these forums (for a desktop PC, for example).

  Or do I have to repartition the hard drive into two partitions, a 320GB and everything else - use someone elses of the Microsoft Windows 7 OEM CD?

  I do not have the Microsoft Home Premimum disc of course, only the HP recovery discs.

  The new hard drive sometimes requires to prepare first with utility cd from Cyberlink. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the downloaded file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

  http://ftp.HP.com/pub/softlib/software11/COL32372/PV-80183-1/sp44645.exe

• HP Envy M4: Just changed the HARD drive (failed) and replaced with SDDS, having problems loading OS System.

  SO as I said, my HARD drive wasn't so I went and replaced by a DDI, I did not have any recovery disk or anything, because I didn't need anything off the old HARD drive (I had an external which had all my videos and photos) now my only question is how can I load my old windows 8 OS and then upgrade to windows 10.

  any advice or assistance would be greatly appreciated.

  Thank you

  Alex

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/document/bph07143

  Kind regards.

• SMART hard disk error after replacing HD

  Hello!

  I SO hope that this someboidy is able to help me.

  I'm NOT a novice but I am confused.

  I replaced with the same model HD HD CQ58 provided with COMPAQ because the old HD was shot - how it happened escapes me.

  Anyhoo, after screwing a new HD I wanted to put OS on it, but I get the following error just after pressing set button / stop:

  SMART disk error

  INTELLIGENT drive control has detected an imminent failure. So no los data, please backup the content immediately and run the system diagnostics hard drive.

  Hard drive 1 (301)

  F2 System Diagnostics

  ENTER - Continues start

  For more information, please visit: www.hp.com/go/techcenter/startup

  I will return the LINK later.

  First of all, I pushed ENTER. What has emerged is:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  F2 System Diagnostics

  For more information, please visit: www.hp.com/go/techcenter/startup

  I pressed F2 and this is what happens:

  I get the diagnostics Menu.

  Version 1.6.0.0 - BIOS

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  Memory test

  Check the hard disk

  Language

  Output

  I pressed Hard Drive Test is the "Quick Check" and that is the message I get:

  INTELLIGENT control: NOT AVAILABLE

  DST short: NOT AVAILABLE

  ==============================

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  I tried the LINK, it does not exist.

  I also went in the Boot Options in the BIOS to boot from a USB and put the USB HD in the first place.

  When I restart it does not recognize a USB key. I tried Windows 8 and UBUNTU which ususally works on all the machines I've fixed so far.

  No chance whatsoever.

  As I mentioned earlier:

  I'm puzzled.

  I have no recovery CD and cannot make one because I'm not running Win8 on any of my PC.

  Thus, any suggestions?

  Help, please

  Thanks in advance

  Henry of Kai

  First of all:

  Thank you all very much for taking the time and you answer!

  And now, for what happened after I did all what has been proposed:

  Nothing.

  The message remained the same.

  Still no hard drive (even if it was new)

  Then I took a hard drive to work with Win7 on it from another machine, put it in the Compaq and... nothing.

  I tried the USB with Win8 (NTFS with Rufus) does not.

  I don't know why, I tried again, but when I used the same USB with UBUNTU Live - 14.04. on that I had taken or tried before... He recognized at startup.

  Weird hard drive wiped completely since it was not recognized by the BIOS (one with Win7 on it... data paths but I had backup ).

  So, now I'm running the faithful Tahr on the Compaq and it works fine.

  I will try to put the original Win8 on it, but the system doesn't seem like more since USB NTFS NTFS are not recongised at startup.

  Well Anyhoo, I got the machine to work.

  Would have been nice to know what was wrong with him to solve future problems, but at least I had to register in this forum

  So I could bore you guys with questions in the future.

  Take care

  Kai

• Failure of the HARD disk - recovery disks ordered

  Hard drive had a mechanical problem. Has ordered the recovery of the DVD system. acquired another HARD disk. Swapped the readers put the diskette 1 of the dvd and follow the steps. It passes through reformatting Windows partition part fine and even ask for the #2 disk. He began the resettlement Original content and gets BSOD...

  PFN_LIST_CORRUPT

  Technical info: 0X0000004E (0X0004EE3B, 0X0005685A, 0 X 00000007, 0 x 00000000)

  Tried 3 times now with the same results

  Thanks in advance to anyone who can help with this question.

  Dave

  If you have 2 sticks of memory trying to remove 1 and try the recovery again. If it fails again swap on memory and try the other...

• How to recover files from the hard disk recovery partition?

  There are recovery (D) on the hard disk.  How can I recover all my old files and programs of this drive?

  Original title: I changed from Vista Ultimate to Windows 7 operating systems.

  Hello sdf361,

  The recovery partition, that is what you would use to restore your computer when you bought it with the OS on it
  that was pre-installed. It is not your old programs and data on it. You will need to backup your data to restore and install
  your programs since the original installation discs.

  If you do not have the program disk, I suggest that the manufacturer of the computer.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows lost after hard disk failure and Downgrade from Windows 7 key

  I have a client with an Asus laptop that allowed a downgrade from Windows 8 for Windows 7.

  After some time, the hard drive crashed, including the recovery partition.

  I got a replacement hard drive recovery disks and OS and the driver, but do not have a Windows 7 key. I installed Windows 7, but I am now in the grace period of 30 days without activation. How can I retrieve the key used on the same machine?

  Thank you very much

  -Joe Sharit

  If you lowered licensed Windows 8 Pro pre-installed, borrow a product key Windows 7 Professional, one on a COA sticker that is attached to a computer or a friend or relative members boxed license, activation of phone use.

  Explain to the Appeals Officer that you are running downgrade rights.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Disk recovery and support

  HP laptop computers come with a couple of additional readers for purposes of recovery and support.  I wonder if these discs actually need a letter drive attributed to them or if the drive letter can be changed.

  Any comments greatly appreciated.

  WD

  Hi, WD.

  Yes, the recovery partition is related to the drive letter.

  Do not change the letter everything you see.

  If you want to add a partition, I would assign it a drive past the last drive letter letter see you.

  If you need to recover your operating system, back up anything on any partition you create, as the recovery process will fix the disk hard back to the configuration of the moose.

  Some people find the hard way.