Hard drive recovery problem

my hard drive of the computer hp dv6 laptop failed on me. so I ordered a new hard drive with the HP recovery disk because I only did one on mine. I installed the new hard drive along and starts the recovery disc and when everything is done, I get a message saying that he installed unsuccefully. now, whenever I turn on my phone it just keeps restarting itself when it assumes to reach to connect with the screen. Please help me.

It is sometimes useful to prepare the new hard drive with Cyberlink cd utility first. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

Tags: Notebooks

Similar Questions

  • Satellite A500-1CO - HARD drive recovery problem

    I have a PC laptop toshiba Satellite A500-1CO.
    Previously, when I wanted to again pour Windows
    Recovery program HARD drive that I used

    But now I delete d:\HDDRecovery folder and when I run the HARD drive recovery program a mistake with this article shows you:

    Folder HDDRECOVERY not found in d: \.

    Excuse me for my bad English

    Hello

    > But now when I run my program of recovery of HARD drive
    > An error with this article shows:
    > Folder HDDRECOVERY not found in d: \.

    Have you checked if the folder in hard drive recovery leaves the local d? Perhaps, you have removed before...

  • Satellite L655-1HE «Problem of HARD drive recovery»

    Hello

    I have the Satellite L655-1HE. I created a "HARD drive recovery" through "create recovery media. On the contrary, CD/DVD, I put it in a USB Flash drive. But when I used it, a mistake was "copy of splitpart or the Canadian Red Cross has failed!" After that, I can't boot my laptop more. There is a message "BOOTMNGR missing." I think I already deleted the operating system in the player. Please help me. How can I fix?

    Hello

    If you can, please try to boot again from the USB and run the recovery.

    Whatever the problem, if the recovery is unsuccessful, I recommend the following steps:

    -buy a set of recovery-store to the wire to https://backupmedia.toshiba.eu
    -If you did, and even this game fails to install, take care to check your HARD disk for problems.

    Hope this helps

    Tom BR

  • Satellite L350D-21 problems using new HARD drive recovery recovery disks

    Hello

    I have laptop SATELLITE L350D-212 with windows 7 Home premium OA.
    He started to complain that there is something wrong with the hard drive so I went and bought another hard drive of the same size.

    I created the recovery disk when the computer was purchased and have backup of all the data in an external hard drive.

    After I changed the new hard drive to the laptop and tried to boot from the recovery disc, nothing happens eventhoug I can see it seems to be all Ok with the disc.

    Any ideas on how to get to run to the new hard drive recovery?

    I have the old hard drive attached as external drive via the USB port, but cannot boot from that too. It just stops at a certain point and told to stop.

    Hello

    Usually, the recovery disk must format the new HARD drive but I recommend you to join the new HARD drive as an external device to another computer and format the new HARD drive before trying to recover the laptop.

    Once the HARD drive has been formatted, connect it to the L350D and boot from the recovery disc

    Good luck

  • Satellite L670 - the system HARD drive recovery does not start

    Hello together,

    I have a problem with my laptop. I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
    Now I want to restore the original Windows Home Premium. On the laptop is a second partition with a folder named "disk HARD recovery.

    When I hold the button '0' on start nothing happens. The beginning of doesn´t of system recovery.

    Can you help fix the problem.

    Thank you and best regards,
    Dinder

    Hello

    This does not work because you have installed Win 7 64 bit as you said here:
    > I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
    But have you tried also pressing F8-> fix my computer-> drive HARD recovery?
    Try this

    Otherwise, drive HARD recovery does not work because the boot manager has been changed or damaged as a result of the new install of Win 7 and this is why you cannot load HARD drive recovery.
    That is why it s always recommended to create a recovery disc before changing anything on the HARD drive.

    What to tell buddy you need recovery disks. I guess that you have a European model for laptop

    You can order the recovery discs here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • How to create a recovery media from HARD drive recovery image?

    When I tried to recover a fresh HARD disk recovery Windows, my little son stopped the proccedure by accident.

    When I tried to reboot I get the message bootmgr is missing. I have a copy of the HARD drive recovery file but din not creating a restore DVD.
    The question is if I do a recovery bootable DVD or USB of file file from the HARD drive recovery file?

    Thank you!!!

    There is a method to create the USB bootable recovery DVD or ISO file - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm, but I put t think this will help.

    Problem is that this backup is really unnecessary. There is also possibility of installation of recovery disk original order. You can order it on https://backupmedia.toshiba.eu/landing.aspx

  • Qosmio F50 - the hard drive recovery?

    Hello

    I had a very big problem.
    I've made a few changes with my Vista regs and then I was unable to start again.
    So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.

    Well, now problem - everything was going well, but when I walked into the Vista installation I had to shut down the computer.
    Now, when I start up the pc and load Vista I message I need to reinstall my computer again.

    Well, they say nothing about how load the recovery file but I have no option for this - only emergency mode, with the support of network, etc., but without recovery emergency. Moreover, when I select emergency mode, I can't load Vista-it says I need to run the Setup in normal mode, which told to re - install. Yep, circle-_-.

    Model: Qosmio F50

    Do you think that when I erase all the Vista disc manually - for example with linux, and then start the computer, I get a possibility to load the second part of the drive to start the installation?

    Thanks in advance because I'm really despair

    Hello

    > So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.
    I'm a bit confused of m.
    How do recover you the laptop?
    Have you used the Toshiba HDD recovery option which could be launched by pressing F8, select fix my computer-> Toshiba Recovery?

    Usually, it is a procedure how to start the Toshiba HDD recovery.

    I guess you didn't create a recovery Toshiba drive in the past is good?
    It was a big mistake buddy because the recovery disk would help you in difficult situations

    Well, as I said above; You can try to start the HARD drive recovery. If this will not help you I think that you would need a Toshiba Recovery disk.
    You can order it here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Portege won't go in HARD drive recovery

    Hello
    I have a laptop Portege that I want to get back to the default settings after news of windows 7 has been installed on the system. I did it in the past of the system while now the key 0 down however now I see when I do it is the label of "HARD Drive Recovery Mode" down left and then the operating system loads normally.

    No idea what is the problem here? How can I force the recovery process?
    (I don't see the recovery partition in Windows.)
    Thank you
    Erez.

    Hello

    HARD drive recovery option is available when the laptop to factory settings.
    >... after a new of windows 7 has been installed on the system.
    If you have installed your own Windows version HARD drive recovery option is no longer available.
    In this case, you can install original recovery image using recovery media (DVD).
    You have created the media according to the instructions described in the user s manuals document?

  • To the Satellite A200-23d HARD drive recovery

    Here is someone who knows if the Satellite A200-23d has a HARD drive recovery integrated?

    I can't say for sure, but I'm sure it comes with a 99% HARD drive recovery image.
    Can you please tell us what your problem with this model of laptop?
    How can we help?

  • Satellite T130 - failed to restart after HARD drive recovery

    Hello

    I used the Toshiba HDD Recovery tool for reinstall windows 7 on a recovery partition. Everything went well until the end when the pc restarted and would not restart. So now that I'm stuck, I can't access f8 more.

    Any suggestion?

    Thank you

    Andrea love

    Hello

    And what exactly is happening now? You have a black screen?

    To me that sounds like it, something goes wrong in the installation of HARD drive recovery then I recommend reinstall Windows again since the middle of recovery that you created on USB or external CD/DVD drive. This can restore Windows again.

    Theoretically, it could also be a hardware problem but I would try the middle of recovery recovery facility that s my personal opinion. ;)

  • Instead of the wizard of recovery HARD drive recovery

    Dear all,

    I would like to re - install the OS on my Satellite Pro T130 laptop without changing the partitions. This is possible with the http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm Recovery Wizard

    However, when I boot my laptop with the Advanced Boot Menu (F8), I think the recovery menu of disk in the System Recovery Options, no recovery Wizard.

    I tried to start this wizard by starting the computer with the button zero (0) at the top, but it did not work. I closed the windows, pushed and held 0, turned on my laptop, when Toshiba logo appeared I sill held the key zero and instead of the Recovery Wizard, open windows.

    I tried at least 10 times and it's getting frustrating.

    I bought this laptop in Hungary in 2010.
    I was wondering that Toshiba offers the two (HDD Recovery + Recovery Wizard) on their laptops or older laptops recovery options came with only HDD Recovery?

    If the start procedure with the zero key does not work, what can I do?

    In addition, I understand the difference between HARD drive recovery and Recovery Wizard is as follows: (please, correct me if I'm wrong)

    HARD drive recovery is re-definition of the manufacturer State which means that it removes all the data in each partition. When you turn on the laptop first time computer, a wizard will appear so you can partition the hard drive. As out-of-box + customization option in the Recovery Wizard.

    Recovery Wizard has three options: out of area (described previously), customization of partitions and recovery without changing the hard drive partitions. I want to use this option, so will not delete all the data of the first partition of the hard disk (drive C). Is no data on other partitions like D, E (etc.) readers.

    Am I wrong?

    Thank you for your answers,

    Kind regards
    Kardos52

    Hello

    According to the specifications of the laptop this Satellite Pro was offered with the version preinstalled Win7 and Windows XP Home edition recovery DVDs. Win7 preloaded includes preinstalled Toshiba recovery disc creator tool so the laptop owner can create recovery (bootable USB key) media which includes the original image of recovery for Win7. This bootable USB key can be used for recovery image installation if there is a problem with the installation of HARD drive recovery.

    As I see you have a problem with the installation of HARD drive recovery, so my question is: did you create this recovery media? You, and you can use it for installing Win7?
    > However, when I boot my laptop with the Advanced Boot Menu (F8), I only find the recovery menu of disk in the System Recovery Options, no recovery Wizard.
    Toshiba HDD Recovery option in the system recovery options will be available if phone has settings to factory only.
    > I tried to start this wizard by starting the computer with the button zero (0) at the top, but it did not work. I closed the windows, pushed and held 0, turned on my laptop, when Toshiba logo appeared I sill held the key zero and instead of the Recovery Wizard, open windows.
    Why don't you use zero to startup? Where did you find the description that you use NRA to launch the installation of HARD drive recovery? I can see in the document validated by Toshiba, you need to use F8 only. When you use F8 and enter advanced startup options is option fix my computer available or not?
    > I asked Toshiba offers the two (HDD Recovery + Recovery Wizard) of the recovery options on their laptops or older laptops with single HDD Recovery?
    All portable Toshiba offered with Win7 preinstalled have Toshiba HDD recovery option but only if they have the factory settings. If the owner of the laptop installation version of the OS option no longer available. In this case, you can install original recovery image using recovery media created.

    From my experience, you should only use the out-of-box option. Be careful with the other options. Recover a custom size partition may lose all the data and recovery image too.

    More important is: you have a recovery (USB or DVD) media or not?

  • Satellite P300 - 20 H - what should I do after HARD drive recovery?

    Hello

    I just picked up my Satellite P300 - 20 H, using HARD drive recovery,

    Any ideas as to what I should do now? Laptop backed up, HDD Recovery wiped and returned the laptop to factory default. What should I do now? I never wiped a laptop or a PC before. I did the restore via the HARD disk and all came back when I got the laptop almost 2 years ago but now I have 108 updates to windows, and my Toshiba Tempro does not work.
    I have to update all the drivers on the laptop and if so, how do I know what needs to be updated and how can I do this?

    I went to the Toshiba site and he gave me a list of the drivers available for my particular model but I am not sure how much of these driver updates, I need to actually download and update.

    If someone could help me it would be really appreciated.
    I would be delighted if someone could just explain to me, because I don't know anything about pc / laptop and just want my laptop back to power. So that everything works correctly. I read in the section of the conductors, on toshiba.com that not all windows service packs must be downloaded not all work along the coast Toshiba laptops. So im stuck if I have to download and install updates Windows 108 that are required to be installed also.

    Hope someone can help out me.

    Thanks in advance.

    Hey,.

    I m wondering about your question: it seems that you have made the recovery of HARD drive but you didn t know what HDD recovery not right?
    As you have noticed, it will restore your computer back to factory settings. You have the same settings that you have purchased. It is therefore useful if Windows doesn t start more or you want to reinstall Windows.

    You can use your laptop as before: there is no difference. All Windows updates should be installed, that's very important because they are security updates day and you help protect your computer. So, start Windows updates and follow the installation.

    Site Web de Toshiba driver updates aren't important, only when you notice problems. If this isn't the case, you can forget the driver updates. ;)
    ?

  • Satellite A500 - HARD drive recovery option is no longer available at the F8 Menu

    Hello, this my phone trees.
    I reset my Satellite A500 and due to a power failure reset did not finish. When I have inexplicable with F8 I can see HARD drive recovery option, and then must log on my account that I did not at all because of the power failure.
    Then I installed a copy of Vista retail, hoping to create an account and be able to retrieve from the HARD drive.
    PROBLEM! : Now I don't see the "Recovery disk" option at all.
    QUESTION: There must be a way to integrate this option in the windows Startmenu (F8). Can someone help me with this issue? I burn the DVD recovery and the recovery partition is still there.
    Thanks in advance.

    More big mistake made you ve, it's that you don't l l create recovery DVD such as recommended by Toshiba.

    Why you didn t ask how it works before you do anything?
    You've misunderstood with username and account.

    Now, when you use your own installation, you need to remove the option for installation of HARD drive recovery and the recovery image can be installed with recovery only DVDs.
    Now, you have two options:
    -to order the new recovery DVDs or
    d ' use the clean install of the OS.

    What do you think of this?
    To be honest, I think you need to use Windows 7 on this laptop.

    I recommend you to install Win7. Download page for all the necessary drivers, you can find and download from Toshiba

    If you have more questions or need help please let me know.

  • Satellite U400 - cannot find HARD drive recovery option

    I'm doing a full recovery from the computer by using the HARD drive recovery procedure, but the problem that I can not find the entrance (to fix your computer) when I press F8 after you restart the computer.

    My laptop is: Toshiba Satellite U400-144
    Model: PSU40E - 03P00WAR

    Kindly advice what to do.

    Hello

    Normally, you can start the drive HARD recovery function if you press the F8 key to go into the advanced boot menu. After that, select Repair my computer and in the next window, you can choose the option of Toshiba HARD drive recovery.

    By the way: which OS you have installed right now? HARD drive recovery is possible on a preinstalled OS to Toshiba!

  • Re: Tecra M10 - 10Z - cannot find HARD drive recovery

    After almost three years of use, I decided to re - install the operating system, because the M10 became very slow.
    Now, there's no disc provided (OS is W7 pro 32-bit)... so I did the procedure of F8 startup... but the list of the checkout (after you have entered "repaor PC) ends with"(execute with prompt): no HARD drive recovery! "

    The operating system is absolutely original. The only thing I did was to add a partition to store all my data.
    Can someone help me understand the situation? I'm the only user if my account is 'administrator' t.
    In addition, I do not see the special partition in 'my computer' (never seen) I only have C and E (E is the one I created)...
    Thank you much for the help!

    I don t have this Tecra and cannot say for sure what the problem is here, but it turns out that Toshiba offers an OS preinstalled with recorded on the second partition in the file called HDDRecovery recovery image. On some machines, this recovery image is saved on partition small and invisible.
    Everything will be OK until the user changes the structure of the partitions or delete the recorded recovery image.

    To avoid this Toshiba recommends creating DVDs which can be used if the user has the situation that your recovery. It would be much better when you have this drive now. I put t know why you didn't create this DVD.

    In any case, I assume that the recovery image cannot be found because of the structure of the changed partitions or maybe you did anything in the past that have deleted the recovery image.

    Now, all you can do is to install OS own version or one order new recovery image. It can be ordered on https://backupmedia.toshiba.eu/landing.aspx

Maybe you are looking for

  • Computer laptop webcam works for video messages but not viedo calls

    During calls video, video integrated webcam to my laptop does not charge not (black screen with a continuous spiral of loading). I can't see my video and the other person when you call can not see my video either. My laptop webcam has worked on video

  • No sound after upgrade to vista full Qosmio G30-195

    Hello I did everything possible, downloaded Update got all drivers in place, yet the SIGMATEL HD DRIVER load well, but I have no sound, I see all this work, but there is no sound.How could it, some say that his incompetence of vista... say yes I shou

  • Display 1-bit depth BMP file in LabVIEW

    I'm reading a depth of 1-bit BMP file in LabVIEW, but using 2D image control, it keeps out of the black.  It opens fine in painting/PhotoImpact applications and I can see the image as an array of Boolean (1 - bit pixmap) by using the code below - so,

  • Unable to get the email address for the new printer HP 3525...

    Hello, today I received my HP Deskjet 3525. Although I use a 3G dongle to connect my PC to the internet, but still I don't get an email ID for my printer to print report page. My question is whether the printer should be connected to the router to ge

  • SubPanel button control programmatically

    Hello I am fairly new to Labview and have mastered every aspect. I have developed a 'pilot' VI, which allows me to control an instrument (communication via TCP - IP). It works very well. Now, I want to use this 'pilot' VI, inside a test VI, who will