have a problem by undoing an action

Similar Questions

• Fix KB2518864 & KB2478658 updates will not install and have a problem. How to solve this action?

  Fix updates KB2518864 & KB2478658 will not install and have a problem. How to solve this action? This fix tries to install when arrested computer, but when the computer is turned back on, there is a box which reads:

  Patching HOTIRON Setup has encountered a problem and needs to close. We are sorry for the inconvenience.

  Hi MrGreener,

  1. did you of recent changes on the computer?

  2 are you able to install all other updates on the computer?

  3. do you have security software installed on the computer?

  4. you receive an error message while updates?

  Method 1

  I suggest that you manually download and install updates, check if it installed correctly on the computer.

  Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26323

  Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26427

  See also the articles below to learn more about known issues for both updates and check if it helps.

  MS11-044: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun

  http://support.Microsoft.com/kb/2518864

  MS11-039: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun

  http://support.Microsoft.com/kb/2478658

  Method 2

  If the previous step fails then I would suggest that reset you the default Windows Update components and later try to install updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Send to trash, auto deletes files: Message "this item will be immediately removed. You cannot undo this action. »

  I know that there is a button somewhere that allows me to send files to the trash when I click right

  But currently the button 'Send to trash' generates this message "this item will be immediately removed. You cannot undo this action. »

  Can someone guide me to the control button that will allow me to have the standard configuration of "send in the trash."

  Thank you!

  LMB

  Highlight

  CMD + delete

• I accidentally click the "Scam", how can I undo this action?

  I accidentally click the "Scam", how can I undo this action?

  I assume that this has happened in a page, manage your mail - and so NOT in Firefox itself.

  E-mail programs usually have a special folder of the Scam - look at the lost post here.

• Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the th

  Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the problem? Thank you

  That may be a problem with the DDE.

  Try to undo and redo Firefox as default browser.
  
  Make a different browser like IE browser by default and then let Firefox do it again.
  
  See:

  • http://KB.mozillazine.org/Default_browser
  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

• I have update problems that interfere with the operation of the Overdrive Media Console software compared to WMA files.

  Windows is completely up to date through the date of this post.

  OverDrive Media Console
  -MP3 download and play perfectly
  -Download error 0xC00D2751 for all WMA files (~ 80% of audio book from the library files are downloadable in this format), informing me to contact Microsoft.

  Solution on the Microsoft website:
  -http://support.microsoft.com/kb/913800
  -The patch will not install.

  Journal of problem with the installation of the hotfix:

  [KB913800.log]
  0.031: ================================================================================
  0.031: 2009/11/16 (local) 18:35:17.508
  0.031: d:\9b8cb172a0ae06ea215f6af0\update\update.exe (version 6.2.29.0)
  0.046: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  0.046: hotfix started with following command line:
  0.078: CreateUserInterface: GetProcAddress for DefineInstallCustomUI failed: 0x7f
  0,109: SYSTEM\WPA\MediaCenter\Installed is equal to the Value specified
  0,109: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,109: second Condition in Prereq.CheckRegistry.Section failed
  0,109: Check condition for 1 line of prerequisite returned FALSE
  0,109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,109: KB913800 Setup has encountered an error: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  0,109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,109: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  20.343: message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  20.343: user input: OK
  20.343: Update.exe extended error code = 0xf0f4
  20.343: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  Cannot find another solution on the Microsoft site.

  Back emails with Microsoft technical support has failed to a solution.  Beyond to download the fix will not download, they have no extra information for me.

  whitepawn23,
  Are you having to provide updates through Windows Update?  If so, I suggest that you perform a clean boot , and then run Windows update.  If you continue to have a problem with a certain update you need to download and install it manually.  Alternatively, you can consider removing the Overdrive program and new test.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with low light action on 70 d calls

  I have just spent a T3i to a 70 d. I seem to have trouble with the plans of action in low light situations, suggestions on implementing...

  Nelly wrote:
  

  cicopo wrote:

  You might find some ideas here.

  A better idea would be for the OP to give us an idea of what is meant by 'disorder '. Without knowing what the real problem, make suggestions are going to be a waste of time.

  More information would be useful.  But I bet confidently on the sentence "my photos are blurry" my silver or black.

• Unable to repair the connection of local error: Windows could not finish repairing the problem because the following action could not be completed

  Original title: Repair the connection to the local network.

  When I try to repair the connection to the local network I get the following message: "Windows could not finish repairing the problem because the following action could not be completed: clear the cache DNS."  For assistance, contact the person who manages your network. "How can I solve this problem?

  Hello

  1. what exactly is the problem you are experiencing when connecting with Internet?

  2. what type of Internet connection you have (wired or wireless) sound?

  3. don't you make changes to the computer until the problem occurred?

  Method 1: To resolve this issue, follow these steps:

  (a) click Start, click run, type services.msc, and then click OK.

  (b) in the list of services, click DNS Client.

  (c) ensure that the status column displays started and that the Startup Type Automaticcolumn.

  (d) if the service is not set to started or if the startup type for the DNS Client service is not set to Automatic, follow these steps:

  a. right click on Client DNS and then click Properties.

  b. in the Properties of the Client DNS dialog box, click the general tab and then click Automatic in the list Startup type .

  c. click Start, click applyand then click OK.

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  Hope this information is useful.

• Impossible to uninstall a program; error message: sorry you do not have the right permissions tocomplete this action. Please contact your administrator on this computer to continue

  I downloaded a program on the internet, but now when im trying to uninstall it is showing this error message: cannot uninstall a program. error message: sorry you do not have the right permissions tocomplete this action. Please contact your administrator on this computer to continue. What should I do please help.

  Hello

  you tell us the name of the program

  go to the website of manufacturers of programs and to find a way to uninstall

  or try this free program for her

  http://www.revouninstaller.com/

  and it is a program 'downloaded a program from the internet' search for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I have Annoying problem, I can hear the sound of the headphones and portable speakers...?

  I recently bought (Dell inspiron 3537), windows 7 64-bit (6.1 build 7601), more info on first image,.

  http://i.imgur.com/SBEezVe.PNG

  but I have a problem when I have a headphones connection to the laptop... the headset works well, BUT I can hear the sound of the headphones and computer speakers posing problem, I want to hear the sound of the headphones only, see the shot of images >

  http://i.imgur.com/lpkKxMp.PNG
  http://i.imgur.com/MXmP6FL.PNG
  http://i.imgur.com/WCpTZCI.PNG
  http://i.imgur.com/ikDKvr1.PNG
  http://i.imgur.com/UIYDAVD.PNG
  http://i.imgur.com/nsrreYQ.PNG

  can you help me please?

  1. open the Device Manager and right click on Realtek High Definition Audio.

  2 Select this option to "Update driver software".

  3. click on "Browse my computer for driver software".

  4. click on "Let Me pick from a list of drivers on my computer".

  5. put the "Show compatible hardware" check box if not already checked.

  6. in the list of devices, click on 'High Definition Audio'.

  7, click on "next".

  8. in the update driver warning box, click 'Yes' (the driver).

  Install the native driver. Immediately test the headphones/speakers.

  If the list of drivers to step 6 do not include "High Definition Audio" then please use the Windows system restore. It is quite safe to use because if you don't like the results, you can undo the restore operation.

• Z10 blackBerry I have a problem my z10 blackberry after os version 10.3.1.1779 update

  I have a problem after updating os version 10.2 to 10.3.1.1779 in my BlackBerry z10. I lost my entire data after the phone turns off and all settings are reset.

  Please someone help me solve this problem.

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • Article ID: KB36747 All data are deleted after a manual restart of smartphone BlackBerry 10 and a blue LED is displayed when starting the

  I hope that it contains something useful! There are also several existing threads on this site, which discuss exact error... your opinion of those who may prove useful, and a search of this website, by using the error message, error code or symptom, should reveal all the existing threads that are applicable to you.

  If it does not, then the next recommended action is to make you a refill of BONE via LINK.

  Good luck and let us know!

• When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix i

  When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix it?

  You set the font size to a size that is suitable for the size of the document.   Size of the document may vary everywhere.   To resolve this problem in action, I solved in scaling the document to a known size then use a font suitable for a document of this size.  When you resize an image using size with resample Images not only checked a single pixel is change everything that is changed is the DPI image resolution setting.  So if you size a picture 8 "wide you choose a font size is good for wide image 8" the Save action.  To work around the problem of changing the size of the printing I wrote a Script to use in such an action.  The script is used twice, there is a backup and restore script.   The first time that the script is used the script records the resolution DPI images in the metadata documents.  The second time that the script is executed, it retrieves the registered PID parameter deletes the record of metadata from images and set the DPI images that had been saved.    If the use of fonts for the document 8 "will be resized to fit the print original size.

  In a script, you can calculate a correct font size to use.  Actions cannot retrieve information or use logic. They need to use the Plug-ing and Script where logic is needed.  When you make using Photoshop UI you use your eyes and brain.

  Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
  Contains

  • Action Actions Palette Tips.txt
  • Action creating Guidelines.txt
  • Action dealing with Image Size.txt
  • Strengthened through scripts functions.txt Photoshop action
  • CraftedActions.atn sample Action set includes an example of Watermarking action
  • Sample Photoshop Actions.txt CraftedActions the value stored in a text file.
  • More then a dozen Scripts for actions

  Example of
  Download

• Hi, I have a problem in the installation, how to install acrobat 8.1 pro in 64-bit Windows 7 Enterprise is existing in Windows XP.  I just want to transfer the license Adobe pro 8 Windows 7 64 bit. What is the procedure?

  Hi, I have a problem in the installation, how to install acrobat 8.1 pro in 64-bit Windows 7 Enterprise is existing in Windows XP.  I just want to transfer the license Adobe pro 8 Windows 7 64 bit. What is the procedure?

  You need to install 8 AA on the new OS with your current S/N (the license allows 2 installs). After the installation, do all the updates if you expect any chance of 8 AA to run on the system. If the updates will be installed not in the menu help, then go to ftp://ftp.adobe.com/pub/adobe/acrobat/win/ and install updates in the order. People seem to have been successful with 32 - bit systems and some have reported success with a 64 bit system. After installation, print something to the Adobe PDF printer to make sure it works. If this works, you should be in good shape as printing treat the bottleneck. There is a solution, but you shouldn't have it.

  If all works well, then go back to the old machine and disable this installing and uninstalling. Don't forget that your configuration is not supported by Adobe. It seems with every new version of Windows, MS seeks to make the user to upgrade the other hardware and software for compatibility. There may be legitimate reasons for this action, but the game just seems to be Ms.

• Problem of Windows with Action Scripts run from a Panel

  I created a panel that has shortcuts for Menu items and tools. I have also two buttons on my slab that run scripts that were created with Actions. I tested these two scripts with the ExtendScript Toolkit for both Mac and windows.

  Both scripts do not run on some computers in the window, but they do on others. It seems that the problem more with 7 of the window then in any other operating system, but it is not universal.

  I am at a loss on how to get hurt this problem. Machine window 7, I'm testing on runs the script without any problems, but some users of my panels have the problem above.

  Any ideas?

  Thanks in advance - Sam

  Action handler code looks like it's a step to play a shadow of action which lies in a defined action named SmileixPix.

  If you added that action shadow action value saved SmilePix the action defined and distributed the action defined in the package.

  If users have an action set SmilePix and you loaded the update action defined as a part of you install. Users can end up with two responsible actions named sets SmilePix one containing the action of the shadow and the other without the Sdade action.  I don't know what would happen if your panels has been used and there was a prior action set SmilePix which is not the action of the shadow.  Make sure that defective computers do not list Action Games named SmilePix twon

• Problem with skin retouching Actions in CS6

  Hello all and sorry for my bad English. I need help if possible: I bought and downloaded skin retouching Actions but I can not install in Photoshop with the Extensions Manager. I ask if there is a way to install it manually? Or in another way... Thanks in advance for the help!

  I sent you a PM with some contact info on get this resolved. Essentially if others have this problem, they should contact the producer of the product by going to the page that they bought the product and click on the name of the producer. They should also contact Jonathan Ferman who works for Adobe and works out the bugs of the Addons site. Jonathan needs to know these issues so that he can work to correct.