Having difficulties to install CS3 after activation on the old system

Similar Questions

• Having difficulties to install

  Having difficulties to install

  Hi Rico,

  Please specify the error message and the product.

  What operating system do you use?

  Start with the help below document:

  Download cloud creative to troubleshoot and install questions

  Kind regards

  Sheena

• Judgment of NAC Manager HTTPS response after activation of the AH

  Judgment of NAC Manager HTTPS response after activation of the AH

  I have currently NAC installation in a lab, and as soon as I restart the Manager after you have configured the AP server stops responding to HTTPS and I got Service temporarily unavailable. After restarting the server I saw something console to check the HA setting but I not see this message again and I don't know how to check these parameter in CLI.

  Hello

  This may mean that HA is not correctly configured (problem with certificates, heart rate, etc.).

  The best thing to do is to connect via SSH for both cams, go to /etc/ha.d/ and delete the files: 'perfigo.conf' and 'ha.cf.

  These are the files that contain the HA configuration, if, after deletion, restart the machine and they will come as stand-alone upward again.

  As a stand-alone, you can HA startover config again, ensuring that you follow the steps required:

  http://www.cisco.com/en/US/docs/security/nac/appliance/installation_guide/hardware/48/hi_ha.html.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

  When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

  Command-r does not work on a 10.6.8 system, you would need 10.7 Lion or better to do. If you try to install a new system and that you have already downloaded, then go to your Applications folder and double-click "install OS X...". »

• Vista activated on the old hard drive hard disk failed to load to the new disk hard wont let me enable

  Vista activated on the old hard drive, failed loaded hard drive vista Ultimate edition on the new hard drive, but do not let me activate. This is a saved copy and use the product from the back of the disc that contains key

  Hi Tony,.

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  You can go through the steps in the link activate Windows Vista by phone activation.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

• I installed windows 7. In the old version of win xp, I got an anti virus, but I cannot replace it in the windows.old folder

  I installed windows 7. In the old version of win xp, I got an anti virus, but I cannot replace it in the windows.old folder

  You cannot extract a whole program from the Windows.old folder, it is used to recover individual files.

  You must reinstall the antivirus from the original media. Most AV programs can be downloaded from the Web

  Consider installing Microsoft's Security Essentials Antivirus program. It is clean, simple and free.

• Having difficulties to install printer Brother MFC-J470DW.

  I called brother Support and after two hours of trying everything they could think of, the tech told me I should call Microsoft, that the problem was with them.  When I start the installation disc, it goes only so far and then it stops.  Gets to the extent where "connect cable" and turn on your machine.  And then it just sits there doing nothing.  I tried the system recovery and it did not help.  How to get this problem fixed?

  Moved Windows 7 installation, set at level and activate Forum.

  I called brother Support and after two hours of trying everything they could think of, the tech told me I should call Microsoft, that the problem was with them.  When I start the installation disc, it goes only so far and then it stops.  Gets to the extent where "connect cable" and turn on your machine.  And then it just sits there doing nothing.  I tried the system recovery and it did not help.  How to get this problem fixed?

  It sounds like a problem to brother or one you won't easily resolved in a forum like this one and the first tip that you're going to get:

  Restoration of the machine to factory default (probably an OEM, not Microsoft, method) after the backup of your important data and collect your keys/serial installation media and product numbers.  Then install latest drivers from device hardware and all updates from Microsoft including the printer after you have restored to the factory settings (probably an OEM, not Microsoft, method) and then install all the other stuff.

  Why this review here?  If the people who made and take over the device (alone, you declare having questioned) could not fix things - and you gave NO DETAILS on what they had you try - you could lose your time here discussing the same things again without the expertise of those who intimately know their own device, wrote the software you are trying to install and tested on the operating system you try to install it on--or you could start from a State of CLEANLINESS and last KNOWN GOOD configuration and if it fails, then - be able to solve problems with those to the brother or simply return the product as a failure.

  Now - if you really think it sounds like a pain - provide details on what is and was not considered, etc..

  Other suggestions:

  If you use this:
  Full driver & software package
  ... as your starting point (this is for your device), we'll simplify and get the printer installed first.

  Simply download the driver (assuming that Windows 7 64-bit, another bit of information to provide):Printer Scanner Driver & driver for local connections

  ... chill out, go to the folder where you unzipped it so you can find the full path and...

  1. Open devices and printers, click Start , and then, on the start menu, click devices and printers.

  2. Click Add a printer.

  3. In the Add Printer Wizard, click Add a local printer.

  4. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  5. On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

     • Click on disk, and then navigate to the folder where the printer driver (see above).

  6. Perform the steps in the wizard and then click Finish.

  What he did add a printer to your printer list?  Can you print?

  In addition, in all their troubleshooting, they you save the driver Package & complete software and do a right click on it and run as administrator?

• Cannot install windows after reset of the partition

  I've literally been sitting to my macbook for the last 10 hours trying to get my bootcamp at work, however after tons of things difficult and research I found online I'm always at a loss. Initially, I had installed windows 7 a few weeks ago for the second time (after that yosemite deleted my previous one during the upgrade) and everything was fine. Then, I took the decision to uninstall my windows because I really wanted to expand the size of my partition, then backed up all my files and used bootcamp to delete windows and re partitioning my hard drive to a single volume. However after this, and then following the same exact steps as before (running bootcamp and sharing in a larger space) once the restarts my laptop that it comes up with the message "No boot device - insert boot disk and press any key" instead start windows automatically load (as it did before). I've repeated several times in the hope that it would work once however I can't help but feel that there is a problem with my hard drive and when I try to check my hard drive (not the 'Macintosh HD' a top one) sometimes - (I say sometimes because it does not say this error when you try to check) said this :

  Audit score card for "APPLE HDD HTS547 * A9E384 Media.

  Checking prerequisites

  Checking the list of partition

  Looking for an EFI system partition

  Checking the size of the EFI system partition

  The EFI system partition file system check

  Check the contents of the folder on the EFI system partition

  Problems were found with the partition plan that may prevent startup

  Error: A disk with a mount point is required.

  and yet when I performed the same task again 2 minutes later he says:

  Audit score card for "APPLE HDD HTS547 * A9E384 Media.

  Checking prerequisites

  Checking the list of partition

  Looking for an EFI system partition

  Checking the size of the EFI system partition

  The EFI system partition file system check

  Check the contents of the folder on the EFI system partition

  Audit of all areas of charger data HFS partition

  Audit of the partitions to boot

  Checking boot partition disk0s4

  Check the file system.

  HFS volume logged more control.

  Check the overflow file extensions.

  Check the file catalog.

  Checking multiple files linked.

  Check the catalog hierarchy.

  Check the extended attribute file.

  Checking volume bitmap.

  Check the volume information.

  The volume Recovery HD seems to be OK.

  File system check exit code is 0.

  Verification of the physical Volume of basic storage partitions

  The partition plan seems to be OK

  (and just for the record more when I check macintosh hd, fine):

  Check the volume "Macintosh HD"

  Check the file system.

  Using the live mode.

  Perform direct verification.

  HFS volume logged more control.

  Check the overflow file extensions.

  Check the file catalog.

  Checking multiple files linked.

  Check the catalog hierarchy.

  Check the extended attribute file.

  Checking volume bitmap.

  Check the volume information.

  The volume Macintosh HD appears to be OK.

  File system check exit code is 0.

  I'm really not good when it comes to such things, so this information can be totally irrelevant, sorry! I had originally check my volumes a recovery when yosemite initially deleted to repartition my hard drive and reinstall windows. I really don't know what to do, any help would be appreciated. I have no knowledge in this subject what so ever but I feel that my hard drive is damaged somewhere (even if yosemite still works perfectly and all my files appear to be intact) or for some reason my boot loaders do not work...

  I can provide more information if necessary, but quite frankly, I have no idea what I'm doing.

  Thank you for taking the time to read this if you have!

  1. do you use a USB key to install Windows?

  2 can you post the output of the following OSX Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Activation of Windows XP after you edit the file system drive

  I am upgrading the disk on Lenovo laptop (Win XP Prof) file - I current code product key (and old hard drive as backup).  I don't have an installation with laptop disc, so I used a Dell OEM disc to load the base OS.  I'm not able to activate Win XP, even using the activation of the phone - it does not work.  Is there a support # I can call or y at - it another way to activate the license key?

  Hi BillCra!

  I see that you have installed Windows XP by using a copy of Dell's OEM and it will not activate.

  Copies OEM Dell didn't actually need activation, unless it has detected that the material is not a Dell hardware. Each copy of the OEM OS CD is tagged to a specific motherboard, which means that the CD of the OS provided by Dell will only activate with a signing Dell MoBo.

  If the manufacturer of your computer, Lenovo, has not provided an OS CD then, you must ask to send you this CD.

  See you soon ~!

• Threats of virus after a clean install... where is the 'old machine' file?

  My PC has a virus; My anti virus would not repair it... After doing a clean install of Windows XP, I remember reading that I can delete a file named 'old machine' if the new installation worked. I installed Microsoft Security Essentials... For 3 days, everything worked was great until this evening...

  Tonight, I ran an update of virus definitions and then run the 'full' scan Microsoft Security Essentials has notified me that I had a few threats. There was also a warning on a temporary file and asked if I wanted to send it to Microsoft I did...
  I am trying to be proactive and prevention viruses take over this machine again... I remembered reading after installation 'own' that I should remove the file 'old Machine' if the computer works well after the clean install? .. .also had a warning on a temporary file.
  Any idea where I can find the 'old machine' file; (I thought the clean install would remove all)... I did a search on my computer and come with nothing
  Help, please!...

  Hello

  Step 1: You can remove it in c:/Windows. With the help of old cleaning disc.

  In the disk cleanup, select the previous installation of windows. Put a check mark to remove it.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Step 2: Run a virus scan to make sure that the computer is Virus-free:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  For more information:

  The disk cleanup tool stops responding while it is compressing old files on a Windows XP-based computer

  http://support.Microsoft.com/kb/812248

  It will be useful.

• Having a problem installing a program. Get the BSOD. Can I try to install in safe mode or in execution of the order?

  Hello.

  For the product that I use, I posted something on the forum of manufacturers. But I have a few questions here, too. It's for video editing.

  I am trying to install a program. He's older, but it does not work with XP (it was pretty well designed for this). He gets by about 75% of the download, says something about the cleaning of the registry, and I get a BSOD.

  I have the latest drivers for the motherboard. I can't install the update of the program until it is installed.

  Can I try to install a dvd in safe mode or through the run command and perhaps get a better result? Or in the back? How can I do this?

  Thank you.

  It works now.

  I have installed directx 10/11 from the dvd - rom of the graphics card. It updated some files. It is XP, and I think that it does only have directx 9. I looked in the term - dxdiag.exe and it says a version 9. Still not working, but has helped.

  I installed the drivers from the cards dvd image. Initially, I took this one from microsoft update. The new graphics card driver seems to have caused conflicts. It is installed.

• Cannot type the password in the user account control prompt after activation of the hidden admin account.

  Original title: where to type the password of the user account control?

  I have a problem of user account control is it said to type an administrator password, but there is nowhere to type in it. I can't access anything on my computer because there is a password. My computer does not have an administrator account and I can not activate the administrator hidden with UAC on because I can't type the password. Where to enter it?

  Hello

  System Restore can probably help.

  To restore the system from DVD

             

  a. start the computer from the Windows installation disc

  b. Windows will automatically run the disk is empty, and will load the files; This can take some time. The

  c. Windows Vista install will begin charging.

  d. now, select your installation language, time and currency Format, and keyboard type and then click "NEXT" to continue.

  e. in the next screen click 'Repair your computer' to continue. Windows will now search an Installations of Windows.

  f. on the next screen, select the operating system on which you want to do a repair. Select it, and then press 'NEXT' to continue

  g. you are now in the menu "Recovery Options.

  h. in the 'Recovery Options' menu select 'SYSTEM RESTORE'.

  i. the menu "Restore files and settings" is displayed, click 'NEXT' to continue. Now in a 'Restore Points' selection select one that you want to restore too. Then click "NEXT" to continue. You are now given an option to restore the other disks as well as the operating system drive. If you have no problem with them, then just restore the main drive.

  j. now, you will need to confirm the restore point. Click "FINISH" to continue or "BACK" to select another drive or restore point. You are now prompted one last time to confirm that you want to continue. Click 'YES' to continue or 'NO' to select a different drive or restore point.

  k. 'System Restore' will boot now.

  System Restore will now restore files, finalize the restoration.

  Once this done, tell whether she succeeded it, if so click "RESTART" to restart the computer, if it's not then try a different date.

  Once rebooted and you get on the desktop, you will receive a confirmation of the success of restorations. Click 'CLOSE' to continue.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Q10 (BBM, CAMERA, APPWORD) blackBerry icons disappears after activation of the control of life private Blackberry q10

  Hello

  After you activate the protection feature of personal information on 0 s 10.3.2.2474... Most of my icons are missing. even after the deactivation of control of life private on the device. Please, I beg you, I await your quick response.

  Concerning

  Obinna

  Parental control is not a privacy control. It is intended to disable certain features, a parent doesn't want a child to help. So, if you enable the control for BBM it will remove the icon. If you turn it on the browser, it will remove the browser, etc. You may completely disable parental control.

• What happens to iCloud library after you restore the old library on Mac?

  I have known problems with iDevices displaying thousands of 'new' images, even if they are all already in the library of Photos on Mac and on iCloud photo library, I posted on here also.

  Through the various attempts to stop these 'new' photos to reappear again and again, I found myself with several copies of the thousands of images in the pictures on Mac and therefore in iCloud (i.e. they synchronized). Rather than go to the library and find it manually and remove these duplicates, I would just return the photo via Time Machine library to its prior state of duplicates. After I restored the local library there will be no duplicates and have much less images than what is in the iCloud, photo library.

  My question:

  'Local library restored' rule and the iCloud library will correspond to the now smaller local library? Or all of the duplicate to my local library files will be synchronized? Put an another passerby, did restore Time Machine also "informed" (impact) the library to match the local library restored iCloud?

  Restores the local library AND remove all images in iCloud and then re-upload a 20 K library to iCloud the only way?

  Thanks in advance.

  Put an another passerby, did restore Time Machine also "informed" (impact) the library to match the local library restored iCloud?

  Restores the local library AND remove all images in iCloud and then re-upload a 20 K library to iCloud the only way?

  First, you will need to erase your iCloud library in iCloud, I'm afraid, Pope, prior to activating the library restored as a your photo library system.

  I only tested once. After the restoration of the library of Time Machine, the library was no longer recognized as the photo library of the system, even in the same location on disk. That caused the iCloud photo library to deal with the library as an additional library must be downloaded to iCloud. The library was merged to the existing library, so older duplicates have been removed.

• msiexec has encountered a problem, it can not install Java Update or uninstall the old version

  Tried to upgrade to the latest version of Java, update fails continually are woth MSIExec.exe error message has encountered a problem and needs to close. Tried to uninstall the old version of Java and get the same message.  Win XP, SP3

  http://www.Java.com/en/download/FAQ/remove_olderversions.XML

  Have you ever visited this site to help you remove older versions of Java?

  What is the brand and model of the pc?

  What is your current antivirus?

  Make sure that your system is free of malware and viruses:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  After back with the results.