HD filled too fast

Similar Questions

• iPhone battery drains too fast since the last update! Please fix this

  MY battery life drains too fast since the last update. Use to be able to use my phone all day and have more than 50% at the end of day. Now I can't do half a day yet. And that's just since the last update

  Hello JasonV!

  I definitely want to get the most out of the battery of my iPhone, considering how much I use and depend on.  We can certainly check a few settings.

  First of all, check out this article to see if there are any apps or processes that use more battery than expected: on the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  Then see that all of your settings are configured as this guide recommends: Batteries - maximize Performance - Apple

  Once those who are defined, give it a try with the settings and let us know which applications use the most power and the percentage.

  See you soon!

• 3500 RPM is too fast for early 2015 MBP?

  Hello, so I played short by osBuddy on my early 2015, Macbook Pro and the laptop gets too hot to the touch very quickly which is weird, because I can run final cut pro and logic pro at the same time and he do not heat it!... in any case yes because my fan was not so spent as 1500 rpm in an attempt to cool I use mac fan control to keep my fan At 3500 RPM while playing, I wanted to make sure that that is not too fast for damage m

  fan of y

  Check your system with the Apple Hardware Test if thermal censor is a bad thing.

• Multimedia center of Toshiba - sound to play too fast

  I recently bought a Toshiba Multimedia Center and installed on a server Dell T105 running Windows XP. The Dell server has not built into the sound card. I use the Dell machine as a server but run it as a normal computer for now.

  Playback of any type of sound or video (iTunes, Media Player, YouTube,...) starts too fast (about twice the speed). After 1-2 minutes playback slows and then runs at a normal speed.

  I uninstalled the software and Toshiba all files read correctly even if, of course, without the sound! After you have reinstalled the software, the problem appears again.

  Any suggestions would be much appreciated!

  Mate well done!
  Thanks for this post!

• Satellite P300-22R - missing letters when you type too fast

  Hello!

  I found a lot of articles about my problem in the internet, but I have not found a solution

  My keyboard on my P300-22R ist no longer works. If I write a little too fast, there are a few missing letters or they come twice.

  I already read the http://aps2.toshiba-tro.de/kb0/TSB1103370000R02.htm of Toshiba, that I should install a BIOS update to fix the problem. The update of the Bios was a success, the inexplicable laptop properly. But it doesn't seem to work so far. Still a few letters are missing.

  Do you have any other ideas? It's really boring, write a text like this: Pei

  Do you need information more?

  Thanks for your help!

  >... ist no longer works
  How to understand this? And in the past, everything was OK?
  What operating system do you use?
  When you type a little slower is there a difference?

  To be honest this problem on P300 is not known to me because I've installed on my Win7 32 bit a year ago and so far all brothers works perfectly.

• DVD player runs much too fast on satellite

  I have a problem with my disc DVD turns drive way too fast for me. I have Windows XP on my Toshiba Equium laptop.
  I've not found no way to set the CD / DVD speed spin.
  I don't know if there are none, but I've used this feature in another computer, and I'd really love to reduce speed.

  The problem with the speed is not a malfunction.
  I do not face the problem with Swedish, but the reader is also effective with CDs, its literally too powerful.
  The speed and the noise are crazy. If I touch the computer or table where computer represents, the shaking did hurt my hands.
  It's like a saw motor and also sounds a little strong.
  I do not have the game I play while the CD is running.

  I wonder the rugged my computer, while it has not broken up.

  Hello

  I don't know what model of laptop you have, but Toshiba has designed the small tool for such purposes. It is quiet acoustics. When you watch a DVD Movie or when you listen to music CDs, you can switch to silent mode and you will not hear the DVD player works.

  Visit the Toshiba support page and check if this tool is also available for your laptop model.

  Good bye

• IPhoto crashing too fast to record.

  Hello. Ive done a search and I've seen a few questions on this topic, but I have another question to add. So, my iPhoto remains open for about 3 to 5 seconds and then stops. This started happening recently, but I haven't added new pictures in a while, so if there is a corrupt file, I don't know how what happens if this problem started a while after I added my last picture?

  I have my pictures on a disc external hard as well, I'd like save those in iphoto on my counter top, but iPhoto closes too fast! Any suggestions?

  Also, this could be caused to save my phone? IPhoto opens when my phone is plugged, but I didn't save all photos recently. Thank you, Owen

  EDIT: Im on a 2011 mac mini with Mountain Lion.

  In addition, iPhoto, I opened my account of girls and not plant the iPhoto application.

  Disable your internet connection and try to launch iphoto while you are offline.

  If iPhoto then works again, you experience the problem that iPhoto crashes, because he can no longer access the servers of Google for maps and location data.  Apple has not renewed the contract with Google.

  See this tip for the user:

  iPhoto 9.4 crashing during playback of the scene

  There are several ways to deal with this:

  • Upgrading to iPhoto if possible 9.6.1.  iPhoto 9.5.1 and newer versions use different map servers.
  • Working offline. If powering down of the network is preventing accidents, a confirm that the accidents are caused by the functionality of the site.
  • Deleting the html of the iPhoto application files, running the java code that attempts to access the servers of Google as suggested by Huxly647':

  See the solution of Huxly647:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon Useful

  I found a solution that works for me...

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  Log of course do the same thing. So it's pretty clear that something happened at the end of Google.

  To access the files inside the iPhoto application select it in the Finder and ctrl-click on it. Then use the command "Show Package Contents" from the menu.  Open the content subfolder and then resources.

  Do not try this fix without making a copy of the iPhoto application before trying to delete the two files of the entire application.

  If you want to make the places feature working again, take a look at the post of cotton-x:

  Cotton-x user posted a clever to patch the iPhoto application solution, so that it uses a private key to access Google's servers. The same fix works well for Aperture 3.4.5, and probably earlier versions of opening as well.  See this link if you want to try it.

  Re: iPhoto 11 - problems with Photo locations

  I've tested this in Aperture 3.4.5 and could view maps of land once again, who have much more detail than the new cards in the latest version 3.6 of Aperture.

  

• ID t0 too fast spawn

  I have an iomega storcenter ix4-200r, which is having problems. When it starts, I get the following error:

  Respawing ID "T0" too fast: disabled for 5 minutes

  I tried to start too live cd and edit 'inittab' but I'm not able to mount the main raid table to get the file. any suggestions?

  I ended the question of fixing. Had to connect to the machine into single user mode and modify the inittab.

• its too fast

  all the comments above treat no sound.  I have sound but the art of sounds too fast, like an old 45LP 78, say like alvin and the chipmonks the value

  All what "above the comments?

• Music and sounds are coming through too fast and too sharp.

  Music and sounds are coming in my treble speakers too much and too fast. Looks like Alvin and the chipmunks. It happens on all sounds from a CD or the Internet. All diagnostics check out OK. It's Windows XP. Any ideas how to adjust the sound quality?

  Hello Jcbrewer,

  Thank you for your message.  Take a look at the information below which I copied from http://www.microsoft.com/windows/windowsmedia/knowledgecenter/mediaadvice/0067.mspx.
  Why my music sounds like chipmunks sing?

  Don't worry, little domestic rodents in Windows Media Player is not configured. Instead, the clock of your soundcard probably has a timing problem. To resolve this issue, try to reduce the level of hardware acceleration for your sound card by following these steps:

  1.	In Control Panel, open sounds and Audio devices.
  2.	In the Volume , in the settings area of the speaker tab, click the Advanced button.
  3.	In the Advanced Audio properties dialog box, click the performance tab and adjust the hardware acceleration slider to adjust the calendar clock for your sound card.

  Remember that, if your sound card supports multi-channel (5.1) audio playback, turn off hardware acceleration (moving the cursor of None) will cause the sound card to play all the audio multichannel stereo (two speakers).

  If you can't solve the problem by adjusting hardware acceleration, you can check with the computer manufacturer for an updated audio driver.

  Another possibility is that it could be a joke any.  You can perform a clean boot that will start the computer without programs 3rd party.  The steps are below:

  1. Click Startand then click run.
  2. Type msconfig in the Open box, and then click OK.
  3. On the general tab, click Selective startup.
  4. Under Selective startup, clear the following check boxes:
     • SYSTEM process. INI file
     • Process of VICTORY. INI file
     • Load Startup items
  5. Click the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  6. Click OK.
  7. When you are prompted, click restart.
  8. After the computer starts, start the program or game and see if the problem is resolved.

  If the problem is resolved, you can check in Add/Remove programs to see if there are any suspicious software that needs to be removed.  You can also check your startup programs in MSCONFIG.  To access msconfig, click on 'Start' > select "Run" > Type msconfig in the box and click on enter.  You will see the Startup tab, you can check all suspicious programs start at startup and remove them.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• voice sound like the chipmunks. too fast

  I checked the volume buttons. The voices are too fast. Everyone looks like the chipmunks

  I checked the volume buttons. The voices are too fast. Everyone looks like the chipmunks

  =============================
  If you have a Realtek Audio Driver...
  This can be caused by the karaoke
  settings in Realtek Sound Effect Manager.

  Go to the control panel and open Sound
  Effect of Manager / sound effect tab...
  Karaoke set to + 0

  More info...

  Using the sound effect Manager
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00377375

  The card Realtek HD Audio Driver user manual
  http://UK.TS.Fujitsu.com/RL/servicesupport/TechSupport/boards/soundcards/RealTekHDA/hd_audio_driver_usermanualver1-00_0418-05 [1] .pdf

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• problem with the sound quality (too fast)

  How can I fix a sound that is too fast, his voice like mickey mouse!  I tried the troubleshooting and purchase new speakers.

  Thanks in advance for any help I can get to fix this obvious internal.

  VS

  Yay!

  You are welcome and thank you for the comments.

  Merry Christmas.

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• My coming sound sounds as it rotates too fast, also I continue to receive windows popup about speech recognition, what does this mean and can I fix it.

  My sound is distorted when coming, such as Skype, its OK at the other end.  It looks like not running too fast (a bit like the chipmonks.  Also, I don't hear anything when I try to play a CD sample in the music file that came with the computer.  Help

  Hi carolejenkins,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what happens when you try to read examples of music files on the computer?

  4. are you able to play the other music files on the computer?

  5. what player you use to play music files?

  6. What is the finished message, you receive the recognition of the word on the computer?

  7. do the sound distort occur only with the Skype program?

  Method 1

  If it helps, try the step below and check out them.

  (a) open Sound by clicking on the Start button and then clicking on Control Panel, click sound.

  (b) on the playback tab, click speakers, and then click Properties.

  (c) click the enhancements tab, and then select the checkbox disable all improvements .

  Method 2

  If the previous step fails, then I suggest that you manually download and install the drivers for card its updated on the computer by visiting the manufacturer of the computer or sound card manufacturer's Web site and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• My replay speed looks like "the chipmunks"--all the replay is too fast?

  Why is my speed reading too fast?

  Why is my speed reading too fast?

  ==============================
  If you have a Realtek Audio Driver...
  This can be caused by the karaoke
  settings in Realtek Sound Effect Manager.

  Go to the control panel and open Sound
  Effect of Manager / sound effect tab...
  Karaoke set to + 0

  More info...

  Using the sound effect Manager
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00377375

  The card Realtek HD Audio Driver user manual
  http://UK.TS.Fujitsu.com/RL/servicesupport/TechSupport/boards/soundcards/RealTekHDA/hd_audio_driver_usermanualver1-00_0418-05 [1] .pdf
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.