Similar Questions

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• DVD player runs much too fast on satellite

  I have a problem with my disc DVD turns drive way too fast for me. I have Windows XP on my Toshiba Equium laptop.
  I've not found no way to set the CD / DVD speed spin.
  I don't know if there are none, but I've used this feature in another computer, and I'd really love to reduce speed.

  The problem with the speed is not a malfunction.
  I do not face the problem with Swedish, but the reader is also effective with CDs, its literally too powerful.
  The speed and the noise are crazy. If I touch the computer or table where computer represents, the shaking did hurt my hands.
  It's like a saw motor and also sounds a little strong.
  I do not have the game I play while the CD is running.

  I wonder the rugged my computer, while it has not broken up.

  Hello

  I don't know what model of laptop you have, but Toshiba has designed the small tool for such purposes. It is quiet acoustics. When you watch a DVD Movie or when you listen to music CDs, you can switch to silent mode and you will not hear the DVD player works.

  Visit the Toshiba support page and check if this tool is also available for your laptop model.

  Good bye

• A bug? Reading Photoshop Action is too fast, after upgrade CS5 - CS6! My action does not work

  On a PC

  I upgraded to CS5 in CS6 (cloud) over the long weekend and I'm now facing a massive headache. Process actions that I use extensively for my work are all foxed by the simple problem reading action going too fast for the script on two documents to stand. I've tried everything I can think of, but the only thing that allows the action to progress substantially (as in previous versions of the software) is the step by step playback mode. It's too slow to use on an ongoing basis.

  The problem is caused by the following sequence

  Save as a document (on the desktop)

  Opened as a document - open that Camera Raw - after settings open in Photoshop

  Select all

  Copy

  Closed - registration No.

  (PS automatically selects previous document)

  +++ Paste +++ command ERROR paste is not currently available

  This is where Photoshop choose the previous/underlying document before applying the Paste command. Since the upgrade its been trying to paste the Clipboard in the fraction of a second after the closure and by selecting the previous document and have reported no documents available to all. Slow down or if stop playback with step by step or stop and continue works around the problem but the workflow causes to slow down considerably.

  Is it possible to script a break during this time crucial one? Or is there a setting preferably I forgot it's breakage behaviour?

  This thread solved my problem http://forums.adobe.com/message/4423788#4423788

  This is a bug. The work around is to record a change in the speed of reading before and after the paste.

  Adobe would you want to fix this problem please?

  While you are, you would also look at "less than 50% of the pixels are selected," it would be really great if we could cancel this warning when batch processing of images and using measures.

• Screen freezes randomly (Macbook Pro retina 13 inches early 2015)

  MacBook Pro (retina, 13 inches, early 2015)

  OS X Version of El Capitan 10.11.4

  Processor: Intel Core i5 at 2.9 GHz

  Memory: 8 GB 1867 MHz DDR3

  Graphics card: Intel Graphics Iris 6100 1536 MB

  
  

  I bought this MacBook on the Apple store online a year ago, and I must say it has been a very reliable machine up to now. It starts way faster that any laptop I have ever used before.

  However, recently to update my OS on the 10.11.4 version, my screen freezes randomly. The keyboard and trackpad are both unresponsive.  Closing the cover does nothing either, since the macbook won't sleep normally as it would be. The only solution I had was to hold down the power button to force it to close.  This has been extremely frustrating and made me lose valuable data too.  I ran the Diagnostics of Apple and the only error seems to be the battery issue. It has been said, however, that it should not affect the performance of the computer.

  
  

  If someone has encountered this problem, great tips, thank you would be much appreciated!
  

  
  

  Hey, I bought the same macbook 6 months ago, the macbook had several recurring problems, graphic and audio glitches, what happened was, sometimes (for watching movies, or playing games) the screen went black with a red line on the left side of the screen, then after 2-3 seconds screen is returned to normal, and then there was a glitch-audio distortion that attaches after 10 seconds - 1 min.

  I have tried to solve this problem, because to the 4months, 2 authorized repair shops are rendered as well an apple store, they told me that the tests have said everything was perfect, they failed to reproduce this problem, and that is probably a software problem, it wasn't, because I did everything to eliminate the risk that this was a clean install os software problem to use different browsers, readers different flash etc.

  About a month and a half my macbook froze for the first time exactly like yours, frozen screen, slider became unresponsive, caps lock light insensitive, trackpad locked (didn t click), closing the screen was always on the apple logo. I did exactly what you were doing, forced to shutdown by pressing the power button.

  I was furious, thinking that this is an escalation of the hardware failure and he was in awe of this next step is to "die".

  The next time he "froze" again, I went to the apple store nearby with the macbook in a frozen state and demanded that they fix it, I insisted the guy writes it down and describe the exact condition of the macbook was when I took it to them, and he said that they will run tests and see When I tell him that it is the "millionth" time test you my macbook, he said, that even if the tests show nothing they will replace the logic board, we signed a "service record" who says that they will replace the logic board and the battery and for the first time that I was happy they will finally fix.

  I was wrong, they called me a week later and say we took some tests and everything is ok, it was the last straw, I did not pick up the macbook and said that I will not pick up unless they fix it.

  Next day I went to the store and made a big fuzz, saying: I have contacted the Ombudsman, and I'll still take legal action if they didn't fixed it the next day.

  Next day I went and they had replaced the logic board so the top-case with battery.

  The reason I say this is, their support at least in my case, it was terrible to the point that I preferred to throw the macbook in the trash and never look back, you can't really imagine how long it took me to convince to repair or replace, for 4months I was on the phone or online chat and was flowing like a ball from one to the other.

  If you are still under warranty, go directly to the apple store and request a fix, when I say request, do not be polite, don't bite on phrases like "we will do everything, so you won't have to come back again," go aggressive mode, because at least in my case, be polite did not help, the best thing would be, when it freezes again not turn off it take it straight to the apple store.

  Another thing is, I had a battery problem when running the diagnostics, whenever I gave it to them they said oh "battery is ok, sometimes the tests fail," my argument? If the tests fail how do you rely on them...

  Go and demand, it is their responsibility to fix, 3 and a half months being polite is not done, I'm aggressive and stares at me in 1 week.

  Good luck

• IPhoto crashing too fast to record.

  Hello. Ive done a search and I've seen a few questions on this topic, but I have another question to add. So, my iPhoto remains open for about 3 to 5 seconds and then stops. This started happening recently, but I haven't added new pictures in a while, so if there is a corrupt file, I don't know how what happens if this problem started a while after I added my last picture?

  I have my pictures on a disc external hard as well, I'd like save those in iphoto on my counter top, but iPhoto closes too fast! Any suggestions?

  Also, this could be caused to save my phone? IPhoto opens when my phone is plugged, but I didn't save all photos recently. Thank you, Owen

  EDIT: Im on a 2011 mac mini with Mountain Lion.

  In addition, iPhoto, I opened my account of girls and not plant the iPhoto application.

  Disable your internet connection and try to launch iphoto while you are offline.

  If iPhoto then works again, you experience the problem that iPhoto crashes, because he can no longer access the servers of Google for maps and location data.  Apple has not renewed the contract with Google.

  See this tip for the user:

  iPhoto 9.4 crashing during playback of the scene

  There are several ways to deal with this:

  • Upgrading to iPhoto if possible 9.6.1.  iPhoto 9.5.1 and newer versions use different map servers.
  • Working offline. If powering down of the network is preventing accidents, a confirm that the accidents are caused by the functionality of the site.
  • Deleting the html of the iPhoto application files, running the java code that attempts to access the servers of Google as suggested by Huxly647':

  See the solution of Huxly647:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon Useful

  I found a solution that works for me...

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  Log of course do the same thing. So it's pretty clear that something happened at the end of Google.

  To access the files inside the iPhoto application select it in the Finder and ctrl-click on it. Then use the command "Show Package Contents" from the menu.  Open the content subfolder and then resources.

  Do not try this fix without making a copy of the iPhoto application before trying to delete the two files of the entire application.

  If you want to make the places feature working again, take a look at the post of cotton-x:

  Cotton-x user posted a clever to patch the iPhoto application solution, so that it uses a private key to access Google's servers. The same fix works well for Aperture 3.4.5, and probably earlier versions of opening as well.  See this link if you want to try it.

  Re: iPhoto 11 - problems with Photo locations

  I've tested this in Aperture 3.4.5 and could view maps of land once again, who have much more detail than the new cards in the latest version 3.6 of Aperture.

  

• Retina pro MacBook 13 inch (early 2015): logic board failure

  I have a macbook pro retina 13inches (early 2015) that I use only for study and check emails. a few weeks ago I noticed that the camera not working. I took the mac for help and they told me it's a question of logic board and I should have a new. It's too expensive, and the warranty just expired. Is this a common problem with MacBook? Feelimg so frustrated! I thought I had purchased quality equipment.

  I have not heard of what is a common problem.

  Questions on the Repair Service for Apple's deposit - a lump sum and a cheaper way to go.

  Genius of booking http://www.apple.com/retail/geniusbar/

• Why my video clips will run too fast when played on the monitor Panel?

  I posted my problem earlier today, but in re-reading it maybe I didn't explain well enough.

  My main question is: "why my video clips will run too fast when played on the monitor Panel.  It comes from occurring after I selected my media in the Panel tasks and placed in the correct order in the Timeline/timeline.  I knew something was wrong when I saw that the clips did not indicate their right length when it is displayed in the timeline (scope).  They have been compressed in only a few seconds, then the clips should have at least 5 minutes.  I ran the clips in the monitor and of course they ran too fast, with a lot of jerking movements.

  3 video clips, I'm doing a PAL HD video taken with my Nokia N8 mobile video camera. Here in mp4 format. This may be a problem?  Note that when I play these individual HD clips on my computer (Windows Media Player) they work perfectly.

  After that I put the clips in my project Panel (or before in the work space organize), I have perforned no modification or manipulation of clips.  They are in their original state.

  Simply too check that the clips do not appear to be compressed, I burned a DVD, the resulting video ran in a few seconds.

  Help would be greatly appreciated.

  What is your project Preset?

  If you right click on the items in the project Panel, then choose Properties, which is displayed for the FPS?

  It could be that the FPS flag is not picked up by the GER, and if this is the case, you should be able to fix this by choosing to interpret the film and by changing the FPS to 25.

  Hope that helps and good luck,

  Hunt

• ICloud sync broken between Yosemite (too old for El Capitan) Mac and iOS9.3 on devices, for all Apple applications. Any solution?

  Since that is new iPad and iPhone one last week, with iOS 9.3.4, I can't rely on iCloud (iCloud Drive) for synchronization between these devices and my iMac on docs or entries that I create in Pages, Numbers, calendar, Contacts, Notes, reminders.

  With no synchronization goes, I am now frustrated with Apple based applications.  The only solution is to buy a new iMac that can do El Capitan for iCloud to synchronize?

  My 2008 iMac cannot go beyond the latest version of Yosemite.  Even apps that I continue to use without problems - except iCloud who can't do what it should.  According to me, only yosemite on the iMac in 2008, was made bankrupt by the last iOS.

  That's the problem - unless someone has found a workaround.  Without a functional iCloud, sync that I've been waiting for has disappeared.  I need to change how to manage what I do on the devices and the computer.

  I would like to find a way to "merge" safe documents created in these applications on both devices and the computer. Initially a merger will have duplicates.  I can't let the docs on any device replace the docs on the other.

  To avoid any loss of docs on any device and computers, I'm afraid to try to use iTunes.  So I won't try it.  Maybe I need to go "manual" and look at the files on each and do the merge manually, by sending an e-mail.  Help!  I discovered this by accident and now that I look closer I see that synchronization does not occur.

  between Yosemite Mac (too old for El Capitan)

  Any Mac that can run in Yosemite can run El Capitan. Early 2008 iMacs can run El Capitan.

• Flashing question mark in the Macbook Pro Retina early 2015 at startup problem

  I have the 128 GB of Macbook Pro retina early 2015 model. I bought my macbook, the year last January 2015. I am just now having problem with my mac. When I'm trying to boot my laptop it shows the flashing question mark and it does not start after that. For a while it worked, but after the update the laptop is never again.

  After reading all the articles related to this issue and even after trying it the entire process for the departure of mac. I'm not able to start.

  I tried all the normal recovery process in the process of recovery of the internet, but still it does not work for me. When I select the disk utility in the dialog box, the drive does not appear here, so I can't erase and start to reinstall the operating system.

  What should I do now? I was looking for OEM SSD, but it's very expensive. with this prize money of (here in INDIA RS - 50 k) I can get the Macbook Air.

  If please guide me on how to start the mac or what do I do next?

  Thank you.

  Frank Bsu

  We have no way of knowing exactly what you have tried that doesn't work unless you tell us. A flashing question mark boot means that your Mac is unable to locate a startup disk to boot from.

  If you haven't tried... start your Mac holding the key Option. That should launch the boot window manager have been, you can select the startup disk, and then click on restart.

  If this does not help, you will need to take the Mac for the service.

  If a flashing question mark appears when you start your Mac - Apple Support

• Should I buy the MacBook Air 13 (Early 2015)?

  Hello everyone.

  I currently own a Chromebook, product that I hope, I sell to help me get the MacBook Air 13. The purpose of the switch is the requirement for me to have a computer (with an operating system in its own right) that I can use for computer science stuff. However, I'm worried about the MacBook Air 13 (Early 2015; the 8 GB of RAM, 128 GB SSD model) is how obsolete, and its durability. I not looking for a laptop that will last me a year and performance degradation that are present or any downgrade of the user experience. I expect a computer that will give me at least 3 years of service and still work without any problems (excluding the damage caused to the user, but assume that I am a responsible person).

  Any kind of help is appreciated.

  Thanks in advance,

  Carlos

  I bought my current computer in 2012: it is a basic model of MacBook Air mid-2012 (4GB / 128GB) now running the current OS 10.11.6 and is now 4 years old and works as if it were new.

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• small beetle in my macbook pro retina early 2015 LED backlit

  Today, when I work with my macbook, I saw a small beetle run under the cover glass of the LED backlit screen. Instantly I stop my macbook then expect to miss him the backlit screen, but he stuck in there and it seems dead in this position. What can I do now? I bought my macbook Macbook Pro 13 of retina (Early 2015), in Sep-2015 and still have coverage until 14-Sep-2016 and repair services. I have warranty for this condition?

  I took a few photos and you can see the insect to the mouse pointer.

  

  

  Bring the MBP in a bar of genius Apple store for an evaluation.  The application of the device is "not a display should be evidence of bug?

  Ciao.

• My early 2015 retina 13 '' Macbook pro intermittently "hang" on a wifi network in my house

  Problem: My early 2015 retina 13 '' Macbook pro intermittently "latch" on a wifi network in my house.  Which means, if I'm on my 2.4 GHz network, it works very well and then randomly - while remaining always connected to the wifi network - will lose its ability to connect what be it for 30 seconds to 1 minute. This occurs every 5-10 minutes. If I go to my 5 GHz connection, it works very well for 5-10 minutes. I keep having to switch back so that it could respond more quickly, or let them hang for a minute until he figures it by itself.

  Meanwhile, I can connect with my iPhone, Windows laptop, Xbox, computer, etc. without any problems. If I take my macbook in wifi areas, I have never run into this issue. I don't really know what to do, and faced with the conclusion this problem online - as it is a very specific set of variables causing problems.

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• Spots on the screen from macbook pro 13 early 2015

  I am from Nepal and bought Macbook pro 13 Futureworld last year. I noticed stains and spots on Macbook pro early 2015. Its the apple care warranty. I would like to know if it is covered by the apple care warranty or not. With this question, I also think questions of wifi signal that falls and has bad reception. Windows 10 Hp431 works very well, Iphone5 too connects well to the router and on speedtest shows better resistance than that of the macbook pro 13.

  

  Best regards

  Rajesh

  This will be of interest to you: http://www.staingate.org