HDMI does not work on Satellite L650D - 10H

Similar Questions

• Output HDMI does not work on Satellite L775

  Hello.

  I have a new Toshiba Satellite L775 with HDMI output.

  I wanted to connect the laptop to my TV to watch pictures via HDMI.
  But it did not work.
  I connected the laptop with HDMI cable for my Samsung - LCD - TV screen.
  Time, wireless and TV are already functioning. (Normally I use the cable for TV receiver, with no problems).

  I tried to change the output with Fn + F5 to TV-monitor (or TV-monitor & laptop).
  But the TV does not detect not the laptop, in any case.

  What's wrong?

  Thanks for the solutions.

  Best regards
  WE34

  I agree with Feliks if the TV supports different HDMI ports, you must make sure that the TV has been set to the correct HDMI port.
  Choose in the settings of the TV the HDMI port and then you can use Fn + F5 to switch to the TV output.

• Webcam does not work on Satellite L650D

  Hi guys
  I have a big problem with the integrated webcam, but it allows first to present this notebook:

  * Satellite L650D-101 *.
  * Windows 7 64 bit *.
  * Athlon II P320 Dual-Core 2.10GHz*
  * 4 GB of ram *.
  * Radeon HD 5145 *.

  Now it's pc to my girlfriend, and I do the interview.
  _I found some visual c ++ program of microsoft in the control panel and decided to remove it_ (she knows nothing about any programming language).
  _then ccleaner_
  _AND now the webcam is not work_

  I tried to download and reinstall the driver, but he continues to not work "+ initialization failed, check the webcam and restart +" (the message is in Italian it is a kind of translation)

  do you know how I can do?

  I called the support in milan... but a fool told me that the only way is to format and reinstall everything... it is simply too stupid just to a webcam, can't believe the company is toshiba things so badly...

  Please help me...

  At first, I must say that I ve ri when I read it work on your support contact guys.
  This is standard advice, but he is the reason for this.
  You must understand that Toshiba notebook was shipped with the tested recovery image (OS preinstalled) and each hardware component should work properly.

  When you remove anything the system and make your own operating system configuration, it may happen that something is wrong and you will have the problem.

  What you can do now is to reinstall the driver for the webcam in the hope that everything will work again. So what you need to do is to remove the preinstalled version, restart your computer and install the latest version.

  At this point, check the Device Manager please and tell us if the cam is recognized and registered correctly.

  I guess you think that everything is easy and with a few clicks everything can be repaired, but sometimes, if nothing helps, you must reinstall OS for all components operate properly. Clean, clean installation driver preinstalled and registry clean, everything should work well.

  If you are not sure of what it is don't move anything in the system. Some components can be used for other applications.

• Toshiba TL939 - HDMI does not work

  Hello world.

  My name is Matthew, I am a beginner.

  I just bought new TV; Toshiba TL939.
  The problem is that after restarting the default TV system, HDMI does not work.

  Connect me my TV cable HDMI with Satellite NC +.
  It's decoder signals. Yesterday, everything works fine.

  Today - this.
  My mother pushed something in the remote control, then back to the factory settings, you know... Mothers ^^

  Please help me.

  What do you exactly by THAT HDMI does not work?
  Have you chosen the right HDMI channel where your satellite receiver is plugged?

  Please read the user manual:
  http://www.Toshiba-OM.NET/LCD/PDF/English/TL939-4046-English.PDF

  Select the right external input source.
  (page 7)-> button 2

• WiFi does not work on Satellite C-55-A - 14 G with a Win 8 64 bit OS

  My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
  How can I fix?

  There is wifi on other computers, but not on this laptop.

  Hello

  You always win 8?
  Microsoft has already published the Win 8.1 System.
  It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.

  The 8.1 update win is free and you can download the Microsoft Store update files.
  Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.

  I guess that after updating the WLan would work properly.

• HDMI does not work after upgrade to Windows 10

  HI. My HDMI does not work with Windows 10.

  Hi, did you have hopefully solve this; I have the same problem?

• Graphics ATI catalyst on Acer aspire timeline 3820 tg - does not work on windows 8 (HDMI does not work)

  I have trouble with my ATI catalyst on win 8 HDMI does not work, and I am not able to download/find the right driver

  The Aspire 3820TG don't figure on our page Windows 8 Upgrade offer.

  Therefore, we do not provide drivers of Windows 8 for this system.

  You can try to find the drivers of Windows 8 on AMD Support site.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• Satellite L500 1QK - output HDMI does not work with a Toshiba DVD player?

  Hello

  Why Toshiba DVD player does not work when I plug the HDMI out on my other bigger screen...

  While he plays well the DVD on the computer and, if I can get the signal HDMI OUT with VLC playing other video formats...

  I hope there is a way to unlock this, because I prefer to play DVDs on my computer (for his problem because I have the ear is not good)

  Thank you in advance for your help, if you can.

  Kind regards.
  Mylène
  (Satellite L5001QK France)

  Hello

  To be honest I n don't know 100% what your problem is.
  If you want to watch DVD movies on your computer with the help of a reader DVD Toshiba but the captain must be indicated on the external screen follow these steps:

  When you have connected the HDMI cable (other) outside on the screen, use FN + F5 and switch to the external display only. When you see the desktop on the beginning of the display external Toshiba DVD player and I think that everything should be OK.

• Scrolling does not work on Satellite Z30-A-1DJ

  Hello

  Summer on the internet trying to find an answer for my problem; How to make scrolling, pinching etc on my touchpad?

  Scrolling never works with this laptop (2 months) and up to now, even moving cursor was not reliable, since sometimes when starting the laptop touchpad was completely dead and has not reacted to what.

  Now there seems to be problems with it since I uninstalled the driver for the touchpad and restarted my computer, but still scroll does not work.

  Troubleshooting for this problem was no good.
  They all lead you to the first research of mouse in the start-> mouse-> advanced properties screen and from here you can adjust the parameters of mouse pad.

  I don't even have this tab on my laptop, while all the others are there (buttons, pointers, pointer, material options).

  How can I adjust the settings of touchpad on Satellite A-z30-1DJ?

  The characteristics mentioned touchpad should be accompanied by software as hardware.
  There are standards of touchpad different as Synaptics, Alps, but also momentum that support different features and different software.

  In the case where this software isn't installed or is not working, the touchpad to scroll as well as other features are not available.
  It could also be that tactile built-in module support no additional features.

  To my knowledge the Satellite A-Z30-1DJ should be equipped with an Alps Electric touchpad and this touch pad is different and does not support the same parameters as MOMENTUM or Synaptic touchpad.

  However, as you said, the additional parameters for touchpad Alps Electric are in
  Control Panel? mouse? last tab (Advanced)

  If you wish, you can try to install the driver for the Synaptics touchpad that has been released for other series of laptops as Portege Z10T-A

  I'm not very well if this Synaptics software would work correctly under the Alps touchpad m power but its definitely worth a try.

• MicroSD does not work with Satellite click 10 LX0W

  Hi all

  I recently acquired a Satellite phone click on 10 LX0W Toshiba.
  The card says it's compatible with micro SD with UHS - I (maximum size: 128 GB)
  According to the SD Association, the Mode Bus UHS - I is compatible with the classes of speed UHS 1 and 3 (http://www.sdcard.org/consumers/speed/)
  However, the card, I bought (Kingston 64 GB, micro SD XC I, UHS speed class 3) does not work properly in this laptop but it works perfectly in other devices.
  The card is recognized by the Satellite click 10 but reading or writing is extremely slow and often give error messages. I can't even format it using this laptop.
  I think that there is something wrong with the Toshiba laptop, but can you give me your opinion please?

  Thank you!
  Kind regards

  Same thing here

  Toshiba click 10 with 10 windows, micro SD card 64 GB Kingston Class10 (UHS-1) does not work. Card is detected allright - can be seen in the Storage Manager, but cannot format it. If I format in some other device, Toshiba click 10 cannot use he - he can't write will destroy ntfs/exFAT FS on the map. The event viewer is full of SD card related errors.

  Any suggestion here, please?

  Pilot of 2006 (on windows 10) but cannot find anywhere ever.

• BT does not work on Satellite A660-13D

  Hello

  I have a Toshiba Satellite A660-13D, and since a few days, Bluetooth does not work.
  In device manager it tells me everything is executed, but BT does not open.
  Can someone help me with this?

  Message was edited: assignment has been translated

  Hello

  It is not easy to say what the problem is here. What you need to do is to activate the BT module correctly and software BT must start properly.
  Are you using the original operating system that you got with your laptop satellite? BT Stack (software) is installed on your machine?

• Drive HARD Win 7 recovery does not work on Satellite L750

  Hello

  I have the Toshiba Satellite L750 with preinstaled win 7.

  I instaled the upgrade to win 8 (from dvd).

  After that I improve the MS site to Win 8.1 System.

  The system does not work properly (DVD is not recognized) so I have to install previuos system.

  First of all, I'm improving my BIOS for the new one - 3.60.

  After that I try to win 7 reinstal my HDD recovery (which is located on the d partition). But it does not work: it has been impossible to start recovering in the menu of the bios (F8 key does not work, it was only possible to press F2 or F12).

  So I have to install my dvd 8.0 Win and now I have it and it works. But this is only a clear system without any addons like nero, ms office etc.

  My question is how do reinstal win 7 of my hard drive recovery that I always on the d partition?
  in the bios the F8 key does not work.

  After clean OS installation installation of HARD drive recovery not working anymore. If you want to have the original image of recovery preinstalled on your machine, you must use recovery DVDs.
  I assume that you did not create this disc, right?

  In the user s manuals document clearly described how it works with the image recovery and the creation of recovery disks.

• Screen does not work on Satellite L775-10F

  I turn on the computer and the screen does not work. Everything seems fine but the screen is all black.

  Nothings happening. I tried turning market and its still does not.
  I also tried to connect to my TV with an hdmi cable.

  What should I do?

  Connect it to the TV and wait until Windows 7 is fully loaded (you will hear sound Win) than trying to use FN + F5 several times. It may happen on the TV Office. Be sure you use the right settings on the TV (HDMI port must be enabled on the right).

  F nothing helps I presume the display can be defective then contact the closest service Toshiba and let them check your laptop.

• Satego x 200 - 21u - remote and HDMI does not work on Windows 7

  Hey

  I have a problem with win7 and the remote that was shipped with my laptop when I bought it.

  I installed all the drivers for the toshiba for win7 home page. I also installed winvista, as the webcam driver - and the touchpad drivers.

  The only two things, works does not are the distance and the HDMI output - sound.

  my remote does not work with win7. If I connect my laptop to my dish tv via the HDMI cable I just see the image but no sound.
  I also changed the settings in the soundoptions in win7 default to Digitalaudio (HDMI), but it does not in any case...

  can someone tell me that I need to install these two or do I have to do the drivers, to make my remote and the HDMI output work?

  Thank you very much

  Hi mate,

  It of really strange to say because this laptop is a little older and therefore there is no official support for Windows 7, I think...

  Do you have yellow exclamation marks in Device Manager at the present time?
  For HDMI, I think that chipset, display and its driver must be installed. Maybe you can get one on the Intel page directly.

  Also, make sure that the latest version of the BIOS is installed on your laptop.

• 3 USB ports on 4 does not work on Satellite A660-12th

  Hi, I have a problem with my laptop french: 3 or 4 of my usb ports does not work.

  My laptop is a:
  Satellite A660-12th
  Reference: PSAW3E-02700GFR

  I almost tried everything:
  -reinstall all drivers
  -Uninstalling the root USB controller and restart the computer
  -Finally to format my laptop and clean reinstall.

  -3 ports still does not work and I do not know how to solve them.

  I bought an of 2 TB external HARD drive and its driver is installed but not recognized by the last working USB port. I really need to fix the other 3. Could you help me?

  Wait a moment have you tested all 3 USB ports only for external 2 TB HDD?
  How USB ports do not work if you connect a USB mouse or a USB flash memory stick?

  Page plug Toshiba says that this laptop supports 3 2.0 USB ports: 1 left, 2 right
  The one on the left is a port eSATA/USB 2.0 supporting sleep and fresh.