HDMI on Dell ST2310 monitor resolution problem / Inspiron 537/Radeon 4350

Similar Questions

• Dell U3011 Max resolution problem with Latitude E6510

  Hola,

  I have a Latitude E6510 E-Port Plus anchor and U3011 monitor.  The laptop has a NVIDA NVS 3100 M with driver 8.17.12.5922

  Using the Dual-Link DVI cable attached to the monitor I can only get a max of 1920 x 1080 resolution.

  The Dataport interface using the full 2560 x 1600 resolution works.

  The problem is that I have two PC I want to connect the same screen and switch between them using the built-in monitor source selector.  The monitor has an interface unique dataport only, but has 2 x Dual-Link DVI - so I need at least one of the DVI ports support the full resolution.

  Is it possible with this Dell laptop, the Dell dock, this Dell monitor, connected with the Dell supplied cable DVI?

  1. is this laptop support Dual-link DVI? I can't find the E6510 User Guide.

  2 - is the Dual-link DVI support dock?  The E-Port user's Guide is not clear.

  3. by Guide Dual - link DVI U3011 user is supported.

  Best regards

  Emilio.

  Dr. Emilio Lizardo,

  None of the docks support DVI - D Dual Link. If your locked to the resolution of the unique link.

• Second monitor resolution problems

  I have a Toshiba laptop (Windows Vista) and use my Samsung TV as a second monitor to play DVDs, iPlayer, etc.. Until recently it went well - when I connected the cable to my laptop, the laptop screen went black and the image appeared on television in the correct resolution. Recently, without apparent reason, when I connected to the TV, the resolution goes haywire. I've been playing with customization under display settings, but the right mode for television (1360 x 768) is no longer available. How can it be, when it used to be in the corresponding mode? I can't work out what to do to solve the problem. Help!

  Follow my previous answer from this line:

  "Resolution if your laptop 1280 x 800 and your TV's native resolution 1360 x 768, the system then controls resolution that both can function normally it is 1024 x 768, maybe it's what you see on your TV." You must set their resolutions of 1024 x 768, or only the laptop monitor would come ON. »

  Maybe the Fn + F5 didn't work because they are defined in different resolutions. You must set their resolution to 1024 x 768.

  See also this thread:
  Connection to my laptop TV, no display.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/connecting-my-laptop-to-TV-no-display/247cc2ec-b03e-4be8-9b41-4e86dbc152fa

  If the TV is available follow the second paragraph on my post presvious to set the monitors with higher resolutions.

• Inspiron 3847 Office HDMI not wake up monitor

  Just bought a desktop computer Inspiron 3847 with integrated graphics to assess if we bring to our society.  Connected to an ASUS HDMI monitor and have no video.  Could not understand what was going on so connected via VGA instead and it worked as expected.  Ultimately determined that the Inspiron does not send a signal of alarm for the monitor.  Tried the monitor on a different model computer and it worked correctly.  Tried another cable with the monitor and the Inspiron HDMI but no change.  So, it means using a HDMI on the Inspiron 3847 monitor to turn on the monitor after starting the computer for it to connect via HDMI.  Checked to see if there was a BIOS update, but I have the version 2, which was recently published.  Any suggestions on how to make the Inspiron wake up the monitor when the system is powered or exit the mode 'sleep'?

  I had the same problem, but fortunately got better help Dell Cathaleen did.  I just bought an Inspiron 3847 of Dell desktop computer and also bought a new monitor ASUS from amazon.  Worked well with the VGA cable, but did not work with the HDMI cable.  The solution is simple, just do it once and you'll be ready to go. Basically, you need turn on the input screen while it is on the VGA HDMI cable. Then remove the VGA cable and install the HDMI cable.  Here's how: 1. hang your desktop on the screen with the VGA cable. 2. press "menu" on the monitor ASUS Punch.  3 scroll to 'Input Select' with the 'Down' button on the screen (just to the left of the menu button). 4 drill the menu button to switch to the list of the 5 cables.  Scroll down to select HDMI. 5. remove the VGA cable and install the HDMI cable.

• 10 ThinkPad dock HDMI monitor DVI problem

  ThinkPad 10 when connected via the port HDMI micro directly to a Dell 2007FP monitor via DVI it is

  connection is working normally, but when the monitor is connected using the HDMI tablet dock port the

  Tablet seems to connect with the monitor, but the screen goes black.

  Connecting the dock the tablet to a TV via HDMI to HDMI works ok.

  Anyone knows a solution or having this problem? What is a defective dock?

  I have now successfully connected 10 Thinkpad via HDMI dock port to the DVI connector on two monitors of model later. These are: a new U2413 from Dell and a former model BenQ FP241W.

  The conclusion is that the HDMI dock may work with some monitors but not others, maybe more, models like the Dell 2007FP. The connection has failed also on a Samsung still more old 204 b.

• T520 problems with external monitor resolution

  Hello

  I'm standing right now waiting on hold for a Lenovo tech support rep, so I thought I'd just post my problem here. I just bought a Dell ultrasharp monitor U2713HM and am trying to connect it to my Lenovo T520. We sometimes see the monitor and sometimes it isn't, but this isn't my main problem. The monitor is supposed to be 2560 x 1440, but all the resolution settings are grayed out. I know that the Lenovo can support it because my last screen is a Samsung SyncMaster supporting 2560 x 1440, and it was beautiful (beautiful until the monitor exploded).

  I was on the phone with Dell and Lenovo, and so far nobody has been able to solve the problem. I've updated the graphics driver NVIDIA (NVS4200M) to the latest version (310.90) as suggested by Dell, and I changed the cable VGA to DVI - D cable (connected to the Dual Link adapter), as suggested by Lenovo. He stlil does not work.

  I could use some suggestions. I'm not grumpy at all, so it's quite frustrating. Thank you!!

  
  

• Dell Inspiron 580 connecting to a new Reference Dell U2415 monitor

  Dell Inspiron 580 connection for a new Dell U2415 monitor supplied HDMI cable does not fit my computer HDMI port... the new end of cable is too large for the HDMI port?  How can I work around this? The monitor has a VGA connection.

  Thanks for the help.

  Robert

  Here is the U2415 User Guide. Page 6 shows that we delivered a mini-cable DP to DP (DP = DisplayPort), not an HDMI cable. Pages 10 and 11 show us that the U2415 has the following video ports =.
  HDMI in
  HDMI in
  DP in
  CDM in
  Out DP

  The Inspiron 580 mid back has two video ports =.
  HDMI output
  VGA output

  You must buy an HDMI cable to HDMI locally.

• border of 1 inch on my gateway DX4300 desktop and I cannot get rid of it. I have a Dell ST2310 HDMI

  border of 1 inch on my gateway DX4300 desktop and I cannot get rid of it. I have a Dell ST2310 HDMI. I tried the ATI driver to this day and used the upscaling up to 0. Once the screen saver comes on he returned to the border of 1 inch on my destop and reduced my Explorer window to fit on the border. When restart my computer I can't see the commissioning or put my PC in safe mode. I need help.

  Hello

  Try to update the graphics card drivers for the monitor to which you connect to the laptop using HDMI. Visit the manufacturer's Web site to do the same.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• Starting Dell U2713HM resolution problem

  Yesterday, I installed the Dell U2713HM monitor and connected to my desktop PC using the DVI cable supplied with the monitor. Everything works fine, except for one problem: when I restart the computer, the connection, the resolution is 1920 x 1200 and all my desktop icons are "rearranged". When I change the native resolution of 2560 x 1440 resolution and replace icons in position using the program Icon Restorer, everything is ok until the next reboot.

  Monitor, I installed the drivers from the disk provided with the monitor, updated my graphics card NVIDIA GeForce GTX 560 TI to the latest version of the drivers from nvidia.com and the problem persists. Please advice.

  Sincerely, Dejan

  I solved the problem. The trick is to disable the service Windows Live Mesh Remote Connections. She's.

• (Redirected) Dell Inspiron 580 connecting to a new Reference Dell U2415 monitor

  Dell Inspiron 580 connection for a new Dell U2415 monitor supplied HDMI cable does not fit my computer HDMI port... the new end of cable is too large for the HDMI port?  How can I work around this? The monitor has a VGA connection.

  Thanks for the help.

  Robert

  Best of this post in the Forum of monitors, here:

  http://en.community.Dell.com/support-forums/peripherals/f/3529.aspx

  Bev.

• Dell U2715H as second monitor sleep problem

  I just bought a Dell U2715H monitor to connect to my iMac 27 "mid-2010.

  Implementation, the system works beautifully. Plug n play, as we are accustomed to the Apple universe.

  But after an automatic start, this morning, the Dell remained black, what I tried.

  A phone call with the helpdesk Dell did not bring a solution; they are willing to trade for a new monitor, but I think not (just a feeling) which will tackle the problem.

  After having a cup of coffee, I came back to my Mac, who had fallen asleep in the meantime.

  Pressing a button all of life, including (surprise) the Dell monitor system.

  After a few experiences, I discovered that after a reboot, the Dell remains black.

  Put the system to sleep (using a hot corner) and pressing a key is not wake up the Dell.

  Bringing the system to sleep and pressing a button after waiting 10-20 seconds, puts the entire system, including the Dell monitor.

  The monitor is connected to a mid 2010 iMac 27 "2.93 GHz Intel Core i7, with a miniDP to DP cable.

  Although I found this 'solution' after hours of frustrating attempts, it feels a bit inadequate.

  Anyone who is familiar with this problem who found a more definitive solution?

  Reset the SMC of the iMac, as in > reset the management system (SCM) controller on your Mac - Apple Support

  and discover > get help with graphics issues on external displays connected to your Mac - Apple Support

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• New resolution problem when connecting HDMI to TV

  We have a g6 Pavillion and we were happily watching Netflix movies on our sharp HD 1080i TV via an HDMI cable... until very recently.   Now all of a sudden we get a message when we try to run Netflix that the resolution is too low and it will not launch the application.  When the HDMI cable is unplugged, the resolution on the computer is 1366 X 768.  As soon as I plug the HDMI cable, it falls to 1280 X 720, and I don't see any way to fix it.  The TV shows 1080i by looking at the other entries. It gives no exact resolution, but there must be better than 720.  As soon as I plug the HDMI from laptop, television shows 720 resolution of entry.  So I suspect that this is a problem on the side of the computer.  The strange thing is that it worked fine before.  Any ideas out there?

  If I were you, I would make sure that you use the "Extended desktop" mode and the TV screen is on it's native resolution in the Properties window.

  Using extended desktop allows displays to have independent resolutions that you can adjust to your liking.

• Some problems with the Dell U2713H monitor profiling

  I bought the Dell U2713H monitor.

  I can't find a lot of answers for profiling it. Company Dell does not have any instructions on this subject - so I think it's very bad.

  For example, I am interested in the following questions:

  I create profiles with ' Solution of Calibration Dell UltraSharp"and i1Display Pro.»

  They record the monitor LUT directly, or LUT-video card?

  Now I did 4 profiles, but it is not clear what profile using mode CAL1 oder CAL2 my monitor color space?

  For example. I made a profile with the color space sRGB, but I did not see it in any mode CAL1, CAL2 oder overall.

  Download and install them DA 1.5.3:
  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?DriverID=VJVPH

  Then make sure that yout GPU does not apply "color improvements."

  Run DA and select calibration target and slot of calibration HW store. For example:

  -Preset: sRGB, 120cd/m2

  ICC - version 2 (a MUST to validate it with 3rd party applications), Bradford or CIECAT02 chromatic adaptation, table function, 400 patches, "calibration 1" profile = CAL1 slot

  Once completed, it will ask for a file name, for example, you choose "U2713H_CAL1.icm" and click OK. The profile will be created and set as the default profile for the screen of your operating system Wndows.

  Lunge CAL1 has been stored in a LUT3D of calibration of the "sRGB" @ 120cd/m2. In "U2713_CAL1.icm", it is stored:

  -a linear LUT (output = input), clealing all calibration in GPU

  -actual behavior of range and gamma of OSD CAL1 predefined after calibration.

  It goes the same for CAL2.

  Don't forget that most applications like Photoshop need color management real mode the monitor OSD to have their good active ICM as a 'default' before opening this color managed application.
  For example, if you calibrated CAL2 = AdobeRGB and have a U2713_CAL2.icm, and you want use CAL2 in Photoshop, this profile must be defined as a default value in the OS color management prior to Photoshop.

• Dell Studio 1555 - screen resolution problem

  As I said, I have a Studio 1555 purchased in 2009. Recently, I had a hard disk problem and had to replace it. With replacement, I reinstalled Vista and drivers; However, the resolution of the screen only now allows up to 1152 x 864 - which spans a bit the screen horizontally. My hard drive before, it only lasted in the slightest. I think that I can not have installed the factory properly drivers, but I'm not positive. My replacement hard drive is slower (5400 RPM as apposed to my previous 7200 RPM), but I was told that this would have nothing to do with my resolution problem. Any thoughts? I'm a graphics guy and amateur photographer, so this problem of resolution just doesn't fly. Any help would be greatly appreciated.

  Update: it was indeed a driver didn't install I guess. I installed it and everything is right with the world now.