HDR-as15 update problem

Similar Questions

• HDR-AS15 future updates for still images

  I had a question about the possible updates of the firmware for the HDR-AS15. As I understand the AS15 has the 11.9MP same sensor as the HDR-AS30. However, the still images on the AS15 are limited to 2MP. Is this something that can be changed in an update of the firmware? To allow the AS15 take pictures even at 11.9MP as does the AS30? As both cameras have the same sensors, this should be plausible.

  I love my AS15 but I would like to take higher resolution pictures and take full advantage of the sensor of the camera.

  Thank you!

  At present, an update that increases the resolution of the fixed image of the AS15 is not available. We appreciate your comments, and we will transfer to our team of engineers to review.

• Satellite C855 - 2M 1 - AMD graphics driver automatically update problems

  I have a Satellite C855 - 2M 1 and installed windows 8.1.

  I installed the first upgrade of the video driver from Windows update (WDDM 1.2 02/11/2013 9.12.8.0)
  and it works well.

  Lately on windows update has been released a new driver (Advanced Micro Devices, Inc. - Graphics)
  Adapter WDDM1.3 - AMD Radeon HD 7500/7600 Series)
  I tried to update the driver but when windows restarts it does not load the driver and restore the old.

  I tried to manually uninstall the driver and updated, but it fails.

  Any help on this would be much appreciated.

  Thank you
  Andy.

  Hello
  To be honest I m not very well why the autopilot GPU update could not complete successfully, but I guess that the update is not out for the AMD Radeon HD7610M, which is built into the laptop.

  I also read a discussion on this issue in the Microsoft forum, and it seems that there are other people having exactly the same problem with this update.

  [Advanced Micro Devices, Inc. - Graphics Adapter WDDM1.3 - AMD Radeon HD 7500/7600 series update problem | http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/problem-with-graphics-driver-update/a7a6da38-6575-405b-86c2-71a620be06b7]

  The question is therefore probably related to wrong or incompatible driver GPU

• HDR-AS15 in 3D?

  GoPro has developed a stereoscopic box for their Hero2 camera a few years ago. It turned out to be quite popular, but it is no longer manufactured (and none is available for Hero3).

  3D has declined in popularity some time ago, but the Rift of the Oculus is fast making it popular again.

  I've actually used a pair of cameras Sony HDR-AS15 for 3D by placing a pair of cameras side by side and just synchronize the images manually with a synchronization signal. It works very well and looks quite amazing, especially in 60 fps!

  Get firmly aligned cameras turned a bit problematic. In addition, it would be great if the cameras could better sync.

  Maybe Sony could design and release a 3D for the HDR-AS15 housing owner, like the GoPro 3D?

  Basically, the HDR-AS15 housing 3D could:

  • accommodate two cameras HDR-AS15, side by side, remote of 65 mm (65 mm human average = RPI = best stereoscopy), firmly aligned
  • Provide a tripod mounting screw hole
  • Allow access to the stereo microphone (I guess we should have both a raincoat and a 'skeleton' 3D housing available as separate products?)
  • Includes a sync cable, between the Sony camera communication ports, to keep the two synchronized cameras (you will get an extra bonus if you can keep even the phases of CMOS sensor, exposure and balance of whites in sync!)

  I have, on the one hand, would immediately buy this.

  I am aware that there are some real 3D camcorders, but they have their own limitations: too narrow, IPD, too narrow field of view (and no available fisheye lens) and so on.

  Thanks for sharing this post. I don't know the workaround solution that you shared with us will help those who want to use the cam action for the registration of the 3D sequences.

  The HDR-AS15 doesn't have any 3D native ability to date, we are more than happy to send your comments to the appropriate Department. We place a very high value on feedback from our customers because it allows us to continue to improve. Thanks again and have a wonderful day.

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HDR-AS15

  I am looking to buy a HDR-AS15 but have a few questions: what is the diameter of the lens? The number of megapixels & it supports calls 720 p video? Thank you!

  Hi SonyinCA,

  Diameter of the lens is functionally referred to as focal length. For HDR-AS15, f = 2.5 mm (1/8 in.) the conversion of a 35 mm camera and for movies: 15.3 mm (5/8 in.). Always Max Effective Image resolution: 2.0 megapixel. It does not support video calls.

  If my post answered your question, please mark it as "acceptable Solution".

• Security update problem - trying to update from McAfee!

  try to install McAfee 2011 3 users Total Protection with installation CD.  After spending the last 4 hours online with them, they claim I have windows update problem - shows up in the history as: for.NETon of a security update windows XP, windows Server 2003, windows vista, windows 7, vista windows 2008... KB2160841.  Finally, they said that the problem of 'failure' to be fixed through windows before my McAfee can be updated? !!! Help!  already four hours online trying to fix! :(

  See Andre.Ziegler response to a previous post, involving the KB:

  Error: WindowsUpdate_00000002 when installing .NET Framework 4 (KB2160841)

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/07e67bc5-1841-4972-Bac4-7a1d81dba8e7

• Update problems - how to prevent an update available

  title of the debtor: update problems

  On XP, I recently uninstalled .net because it was originally a slow race. The result is a much faster computer but update Downloader insists to send me, updated net what failure then to install. How can I stop sending me these updates?

  Hi, Alan.

  You can check the box indicating do not show this message and click Ok.

  http://www.YouTube.com/watch?v=TNPNOm_4RKs

  Word of warning however.  NetFramework is an application that depend on many other applications.  You may want to rethink and reinstall NetFramework.

  How to repair an installation existing.NET Framework

  You may need to repair your installation of .NET Framework, if you upgrade your operating system or if the installation of the current framework is damaged.

  http://support.Microsoft.com/kb/306160

  How to troubleshoot installation issues of the Microsoft.NET Framework 1.1 in Windows XP or Windows 2000 (NetFramework cleaning tool includes)

  http://support.Microsoft.com/kb/824643

• Update problem - cannot install KB982168 & KB2539631

  original title: update problem

  I keep having problems with update KB 982168 and KB2539631

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  Note: KB982168 is an optional update, not security. Feel free to hide it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• Vista update problem, whenever I search updates, it tells me that I need those I supposedly already downloaded

  I recently had to reformat and now I try to do all my windows updates. But whenever I have to search for updates it tell me that I need those I supposedly already downloaded. I don't understand what is happening at all.

  http://PostImage.org/image/a5ivkjhmt/

  Try: troubleshoot common installation in Windows Update problems

• KB2676562 error 80070490 Windows update problem

  original title: Windows Update problem

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  Have you tried everything in this article: http://support.microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  If this method does not resolve the problem, go to method 2.

  Method 2: perform a Windows repair installation

• Vista update problem - stop to update 3/3 0%

  original title: Vista update problem

  When my computer tries to finally start up, it comes to a screen that says Windows Update section 3 of 3, 0% complete.  He is sitting here for a minute or two, then restarts.  This loop continues indefinitely.  Will not start in safe mode.  Used a boot disk to get into the Windows repair and got the result, did not find any problem.  How to cross this attempt to update?  I have Vista.

  When you used the "Startup disk" was available as an option system restore? If so, then choose a restore point created before this issue started occurring.

  If the system restore is not available, then you have 2 options:

  (1) try a "in-place upgrade", aka, repair installation. This can be done by running the system with the "Startup disk" and choose command prompt - How to perform a repair for Vista Installation

  However, if Service Packs have been installed then you should uninstall everything first.

  You will need to know where the Service Pack .exe file is to be able to uninstall the command prompt, because the system does not start properly, or Mode without failure.

  See - method 3: uninstall Windows Vista service pack from the guest here - How do I uninstall Windows Vista service packs as a troubleshooting step

  (2) do a clean install of Vista.

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Update problems (Windows 7 x 64)

  A few days ago I got updates not installed nearly 100, but my laptop has been stuck at 0 KB to download and made no progress.  I finally downloaded a Microsoft Tool that is supposed to fix the errors in the software update that claims to fix many things (but except 0 x 80070057).

  Later he enrolled as ever after searching updates, and when I tried to look for it would just get updates constantly without result.  Restores system attempt to before the bug was encountered failed.

  I finally gave up and returned to the factory (from partition) settings, but my new installation has the same problems, so I don't have any update that it is and can not find them with the "search for updates".

  I don't know what to do here exactly.

  Windows 7 Home x 64

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375