Hello, the printer will not print attached e. RTF file extension.

Similar Questions

• Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.

  Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.

  Hello

  ·         Is that what the problem is with a specific file extension?

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the steps below to solve the problem:

  Method 1:

  If you have problems of location of the files, folders, or other items on your computer, try using the search and indexing of troubleshooting to solve the problem. It ensures that the Windows Search service is running and checks if you have the correct permissions to search all the directories on your computer.

  See the article below for additional information and steps.

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 2:

  Also I ask you to re - index files and then check. Follow the artticle below for the procedure.

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  See also:

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this information helps.

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• When I use Hotmail and try to attach a document to send by email, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.

  The attachment ID has wrong format.

  When I use Hotmail and try to attach a document to send by email, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.

  I have had absolutely no problem in electronic documents before sending.

  Please help, thanks.

  Hello KerJJ,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• If you use Hotmail, I try to send an e-mail, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.

  "Attachment Id has wrong format", we hear wat!

  If you use Hotmail, I try to send an e-mail, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.  I use the Google Chrome or internet explore and cannot send new or respond to emails without getting the same message... help plsssssemai

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• When I try to send an e-mail with attached pictures, I am told that the photos will not appear in the e-mail message.

  When I try to send an e-mail with pictures, a pop-up window appears when I hit SEND and says that the photos will not appear in the e-mail message.  How can I fix it?

  original title: e-mail problems.

  Hello

  I suggest that ask you your question on the following link.

  http://answers.Microsoft.com/en-us/windowslive

• HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger

  HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger. I tried a reboot, including disconnect the motor from the power analysis. A software update was just pushed through today as well, but the problem with the scanner was before this update. This update took place after the power has been turned off, then on again.

  The problem occurred this morning during a prior scan + back. I heard a click or pop/fast spin, something that indicates something was wrong, when he tried to feed on the 1st backsheet through for the scan of the back. Now, it won't take what anyone, even to make a copy using the feeder.

  When I look at the roll holder bar above paper, I noticed that it does not drop down to make contact with the paper he move to the scanner itself. I remember having this problem once before - there are 2 years, while the warranty was still in effect and does not remember how it was resolved.

  Any suggestions would be welcome. I don't want to buy another printer just to get the scanner to feed again. The printer itself is fine and scan from the bed is not affected.

  For anyone interested, I sloved the problem of roller scanner do not push the paper into the ADF.

  I turned off the printer last night. Today, I removed the power cable at the back of the printer and then unplugged the power cord from the wall. It was off for about 30 minutes. I reconnect the cable to the printer and the wall, the printer running and waited about 10 minutes. So tired the charger scanner again. It worked and I don't know why.

  Yesterday, I tried a version of what I found in the documentation for HP support. He said to do, but not to turn the printer off first. He has not worked for me.

  I don't know if my path has really had no effect on the results, but it works now and I don't have to think about buying a new printer for awhile yet. I like this idea!

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

  Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

  Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.

• Status bar at the bottom of the screen will not allow

  Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

  This has happened

  Each time Firefox opened

  Hello Darryl.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• Account of Hotmail, when I connect to the page will not download?

  Once I connect to the page will not download?

  Hello

  Please provide all the information we need to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  -------------------------------

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

• In an attempt tp install I-tunes, I said "the administrator will not allow him" - what can I do?

  I try to install I-Tunes, but my Vista system does not end.  At the end of installation, I get a message indicating that the administrator will not allow the program to add.  I have had no problem in the installation of I-Tunes on my other PC with a system 7.

  Hello

  (1) did you of recent changes to the system before the show?

  (2) are you connected to the system as an administrator?

  (3) what is the exact error message?

  Method 1:

  Follow the links below to solve problems and then try to install iTunes and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2: Uninstall and reinstall iTunes.

  Follow the article mentioned below to uninstall and reinstall iTunes in high mode and check if this solves the problem.

  Uninstall and reinstall iTunes.

  http://support.Apple.com/kb/HT1923

  Also visit the below mentioned link.

  http://support.Apple.com/kb/ht1926

  http://support.Apple.com/kb/TS1331

  It will be useful.

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• Try to burn a CD. The system will not recognize the blank disc or let me burn__

  Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

  Hello

  Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

  If no joy:

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Network of shortcuts on the desktop will not connect to documents

  I have shortcuts on my Vista desktop to the word "Networking" & excel files that I use all the time.  When I click on the shortcut, my computer says that the file is not found.  If I go through 'my computer' to connect to the file, everything is fine.  This problem is also the problem that I posted on another forum with no response yet:

  Running Vista Business & Office 2007 on a Server 2003 domain.  When I access a 'network' (in Word or Excel) file, and then close the file, I'm unable to re - open the file... I get the message ' document is currently in use, try again later ".  Also, if I open a file, make changes and try to save it under the same name, I get the same message.  I have this problem until last Monday... like a switch has been turned upside down or something.  Any ideas?  I am connected to my workstation which is located in an area (I'm not directly connected to the domain).   This configuration running on all my machines Vista and do not have the problem on a different workstation.  Also the Quickbooks will not open the file of our networked society, workstation does not recognize the network as a QB file file.  Can someone HELP me with this.  My workstation, at this point, is essentially worthless.  I am unable to work on any network files.

  Hello cwil0710,

  Thank you for using the Microsoft Answers forum.  What antivirus do you use?  I suggest not including mapped drive in your virus scanner settings.  Did you install any software or update straight from the software before you start the meeting this problem?

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.