help build a host laboratory

Similar Questions

• Can not build cRIO host VI - niFpgaDmaChannelImplementation.ctl error

  I am trying to build my host VI on a crio9074.  At halfway through the build he hangs up while "saving niFpgaDmaChannelImplementation.ctl".  It hangs then there for about 10 minutes and then finally I get an error the build failed with this message:

  niFpgaDmaChannelImplementation.ctl

  Invoke the node in AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_RTEXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_RTEXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCallerMethod name: Save target: Instrument

  It happens regularly every time, so I'm stuck.  I searched and the mentioned control is in one of the directories support LV.  The VI I'm building uses FIFO readings to communicate with the FPGA.

  Is there a digital error code associated with this error?  I think that what you see is that when you build the rtexe, the files are drawn the file executable and causing the paths of the files to be too long.  Windows cannot support that filenames of 255 characters or less.  What happens if you move the location of the rtexe on the hierarchy of the directories in your machine?  For example, if you specify the location of the version to go to C:\ or C:\builds, something with a short path, the build succeeds?

• Please help build a sql query

  Hello

  Please help build a sql query

  
  My Table Test2015 has given below

  Header_id Line_id Ordered_item       

  723887290 199925 MAIN1

  199925 723887291 MAIN2

  199926 723887292 SH-POS-NO-BR POS-INS

  199926 723887293 MAIN2

  199927 723887294 IC-ENV-NON-BR-ENV-PXY

  199927 723887295 MAIN1

  199927 723887297 MAIN2

  199927 723887298 PRCSS SH-FAIRY-ELEC DISTR.

  199927 723887299 SH-FAIRY-SUM PRO-DE-CONS-HOUSE

  I am trying to query my Test2015 table to obtain the records with ordered_item containing 'MAIN1' and 'MAIN2' only. I tried to write a query as below

  SELECT * FROM test2015 WHERE ORDERED_ITEM in ('MAIN1', 'MAIN2');

  But it gives me all the data with the MAIN2 records found but MAIN1 is absent, I want to retrieve only records to both 'MAIN1' and 'MAIN2' present for Header_id.

  While the result below shows me header_id - 199926 and 199929 that he should assume back. I want to fetch documents only with 'MAIN1' and 'MAIN2' both present.

  Header_id Line_id Ordered_item            

  723887290 199925 MAIN1

  199925 723887291 MAIN2

  199926 723887293 MAIN2

  199927 723887295 MAIN1

  199927 723887297 MAIN2

  199929 723887299 MAIN1

  Please suggest.

  Thank you and best regards,

  Prasad.

  Hello

  Try like this...

  SELECT * FROM test2015 WHERE ORDERED_ITEM in ('MAIN1") and in header_id (select test2015 WHERE ORDERED_ITEM in ('MAIN2') header_id)

• Help build control PWM with Accelerator and arduino

  Hello

  Good night

  I'm new to labview
  pls help me to build a project, or give the design, because im confused how connect accelertor to PMW with arduino.

  This regulation:

  Create a program using LabView configuration between sensor
  Accelerometer in the current motor speed continuous is used. Where motor speed
  DC will change according to the level of the accelerometer tilt sensor.

  IM waiting for your happy,

  Please share .vi

  Thank & regards,.

  Kidz stew

  Hello

  TRY this and enjoy ;-)

• Help build a dashboard

  Let me say that it is beyond frustrating working with the product. It is very easy to install and collect data. I think it's great for the resolution of the problems, but the IOC would like to see some signs of dashboard.

  I can create a dashboard, but I'm looking to create a background image, and then simply place a few dials spinning on the image. When I put a background image, it never shows upward. When I go to add data to the dashboard, I received what appears to be options of 1,000. I just want to find a representation simple for the health of the host, or if it's upwards or downwards.

  My biggest frustration with the product is that it seems to be for a lot of the represented data which is not very easy to translate or to represent with an object.

  Hello

  What format you use.   GIF/jpeg/png should work fine.

  I have seen in previous cases of version where there was a problem in which you may need to create the dashboard and set a background image when you have an empty dashboard.

  Once you have a white dashboard, open the right panel, choose Properties > change basic properties

  

  Then select the background picture link

  

  And download the image

  

  Once you have the dashboard with background image, there are a few things you can do.

  You can use existing views, please note that the default view is by module, but you can also check the box to see the views by role

  

  Or you can drop data, by dragging actions or objects on the screen and choose from the list of existing views.

  

  There are many good tutorials and links for drag and drop dashboards

  There is a webcast that was done as part of the series of admin (just check out the webcast you want to fill in your details and click on submit). https://software.Dell.com/event/Foglight-administrator-skills-101866232

  We have a video of dash custom on the support link

  https://support.software.Dell.com/Foglight/5.6.2/videos/17093

  And there are a good number of examples on the site of the community, of which some include the use of background images.

  http://en.community.Dell.com/TechCenter/p/searchresults#q=dashboard%20video

  Foglight gives you lots of options (sometimes too much), but the datatree itself has a good list according to categories vmware and has the ability to search a sepecific object in a list (host esx, virtual machines, etc..)

  

  (In my opinion) the best display options exist when you choose a layout for the dashboard of fixed size)

  In regard to the presentation of a status of the ESX host you can select alarm severity in different sizes and with or without name (if the name is not meaninful you select alarm severity without name and doing dragging text to give the icon a meaninful name).

  

  You can also select the health with history

  

  Hope this helps

  Golan

• * Need help Builder *.

  Please help me understand the Builder in the following code:
  < pre >
  Class Ch5Circle {}
  
  public static final int INVALID_DIMENSION = - 1;
  RADIUS double private;
  public Ch5Circle() {}
  This (INVALID_DIMENSION);
  }
  
  public Ch5Circle (double r) {}
  setRadius (r);
  }
  public double getArea () {}
  result = INVALID_DIMENSION;
  If (isRadiusValid()) {}
  result = Math.PI * RADIUS * RADIUS;
  }
  return the result;
  }
  public double getRadius () {}
  return RADIUS;
  }
  {} public void setRadius (double r)
  If (r > 0) {}
  RADIUS = r;
  } else {}
  RADIUS = INVALID_DIMENSION;
  }
  }
  Private boolean isRadiusValid () {}
  return RADIUS! = INVALID_DIMENSION;
  }
  }
  < / pre >
  If I create a method hand and do something like suite what constructor will be called and that we don't not or they both will call:
  < pre >
  Circle of Ch5Circle = new Ch5Circle (5);
  Double area = circle.getArea ();
  < / pre >
  
  Help, please!
  
  Published by: user10860710 on January 5, 2012 21:31

  user10860710 wrote:
  Thanks for the reply. I would be satisfied if you clearify with your own worlds. My question is why the author of the book that I am reading this:
  

  
  
      public Ch5Circle() {
  
      this (INVALID_DIMENSION);
  
      }
  
      

  
  Is there any use of it?

  'this' is used in a constructor to designate another constructor in the same class with the different argument list.

  In this case, if you understood the logic of the program, you wouldn't have this issue.

  If you do not specify the value of the RADIUS when creating the Ch5Circle class object, the default constructor will be called. The author defines the default constructor to set the RADIUS as -1 by calling the constructor of another. Hope you understand now.

• The call for Experts: help build my DV, mounting system (CS5)

  I read several incredibly helpful articles/guides on building the best PC for the buck.  Evil is perhaps the greatest.  I can't help but notice most of what I read were written a number of months.  In this never ceases to evolve, rapidly changing industry, which translates by light-years ago.

  Some of you experts can I ask this question: If you had $2 k - ish to spend on editing system w / CS5 Production, what would you choose for YOUR system? Excluding the screens, keyboard, mouse, speakers, etc.  Just the case, mobo, RAM, CPU, GPU, PSU, HDD (s), DVD + -, not BlueRay... and what I forget.

  I don't Manage NOT HD video yet, but will improve one day.  I did my homework.  I'm NOT lazy here. But I'M in a HURRY!!

  Many blessings... JAY

  Coltsman33 wrote:

  Many blessings... JAY

  Why thank you.

  	Thermaltake Element V Black Edition steel full Tower computer case Colorshift Fans VL200K1W2Z $154.99
  	Seagate Cheetah 15K.6 ST3146356SS 146 GB 15000 rpm SAS 3 Gb/s 3.5 "drive hard internal-Bare drive $179.99
  	NE5TX470F10DA Palit GeForce GTX 470 (Fermi) 1280 MB 320 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready SLI Support video card $259.99
  	KINGWIN Lazer LZ-1000 1000W modular 80 PLUS BRONZE certified PFC active W / switch LED to 3 ways and the universal modular connector... $159.99
  	Patriot Viper II sector 7 Edition 12 (3 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model PV7312G1600ELK $299.99
  	ASUS Rampage III Formula LGA 1366 Intel X 58 SATA 6 GB/s USB 3.0 ATX Intel Motherboard $289.99
  	Intel Core i7-950 Bloomfield 3.06 GHz LGA 1366 130W Quad-Core Processor BX80601950 $294.99

  ? Item = N82E16835608014 "> Noctua NH-U12P SE2 120mm CPU Cooler
  $ 74.99
  SSO"

  

  LG Black 10 X Blu - ray burner - LightScribe Support Bulk SATA WH10LS30 - OEM

  $99.99

  Was a revised items list to fit under 2 k. f course it's missing hds required for page media etc. And also, I'm not sure if the case would be big enough for the CPU cooler. But you get the idea

• Help Builder Flash broken after update

  Hi all

  I use the demo version of FB on OSX 10.5.8 and AIR beta 2 is installed. It was all working well, but once when I first started using FB in the menu, I got an alert saying there is an update available. I clicked the button to update and it appeared to start but after a minute or two, he threw an error. Since then has been broken using FB - msg: "Adobe AIR - the installation of this application is damaged... etc."

  I tried reinstalling Flashbuilder both AIR 2 beta and still get the same error.

  Frustrating. Is this a known problem and is there a solution?

  Thank you

  sT

  Hello

  Can you please try to reinstall the Client of Community aid - http://www.adobe.com/support/chc/?helpcfg=http://help.adobe.com/HelpCfg/en_US/Flex_4.0.hel FMAP & url = http://help.adobe.com/en_US/Flex/4.0/Using/index.html&product=flashbuilder

  Mayank Kumar

  Flash Builder Engineering

• Help build a query!

  There are two tables. One is composed of members with fresh and then fixed percentile. I need to build a single query based on the following
  
  1. need to know the number of members who report to a beach fixed percent 10%, 40%, 50%. Suppose, total non-member = 50 then
  
  10%-> 5
  40%--> 20
  50%--> 25
  
  2. now, I need to order the members in accordance with their costs. Thus, if he follows the expenses of members sorted by cost
  
  A1 100
  A2 99
  A3 98
  A4 97
  A5 96
  A6 95
  .....
  .....
  A50 50
  
  then
  
  the total expenses should be discovered as
  
  10% [sum of the first 5: A1 to A5] = 100 + 99 + 98 + 97 + 96 = 490
  40% [sum of the next 20: A6 to A26]
  50% [sum of the next 25: of the A27 to A50]
  
  Help, please!
  
  Published by: Fanny on January 11, 2010 07:50

  Fanny says:

  I can try, follow these steps. But I need to improvise the query.

  No problem:

  with t as (
             select 'A' || level member,101 - level expenses from dual connect by level < 51
            )
  select  b.label,
          sum(a.expenses) total_expenses
    from  (
           select  row_number() over(order by expenses desc) rn,
                   count(*) over() cnt,
                   expenses
             from  t
          ) a,
          (
           select  seq_id,
                   label,
                   cumulative_percent,
                   lag(cumulative_percent,1,0) over(order by seq_id) prev_cumulative_percent
             from  groups
          ) b
    where a.rn >  a.cnt * b.prev_cumulative_percent / 100 -- you can wrap it with round
      and a.rn <= a.cnt * b.cumulative_percent / 100      -- depending on your requirements
  group by b.label,
           b.seq_id
  order by b.seq_id
  /
  
  LABEL                TOTAL_EXPENSES
  -------------------- --------------
  10%                             490
  40%                            1710
  50%                            1575
  
  SQL> 
  

  Table A calculates the number of members and each sequential member the number of current Member in descending order of their spending. Table B calculates, for each cumulative percentage of the previous sequence id id. So now, table B, each line defines a bucket. Now, all we need is to join A and B send each Member to bucket appropriate.

  SY.

• request to help build a vi to acquire a signal of pc6251 for the acquisition of data and perform fft it can u people please help me? Thanks in advance

  Hi all... I learn LabVIEW since few days.i want to acquire a signal of pc6251 of acquisition of data and perform fft it can u people please help me? Thanks in advance

  If you do only use LabVIEW for a few days, you should get familiar with it first by looking at some of the resources available here. After that, you can watch heredata acquisition.

  After reviewing these documents, you can post back with any specific questions.

• Help build this VI please

  Hi guys

  I am studying a book of Labview and I'm stuck, making this example. I can't connect the output of the while loop. In the attachment, there is a JPEG file, explains my problem. Please help me...

  Your table on the front panel is not defined. All you need is a table container. You need a real control or indicator inside the table to specify its data type. Select a digital indicator in the palette and drag it inside the container table. Who will set the data type for the table and its icon on the block schema change.

• Help setting up a laboratory at home using Cisco kit and a blank Superhub

  

  Hello world

  I just started my CCENT class and so I try to create a laboratory that is separate from my LAN House, initially using a blank Superhub and a Cisco 1841 router.  Please keep in mind that I am a beginner, so it may not make sense or be completely illogical...

  The superhub for those who don't know, is a renamed netgear, limit VMDG480.  It's basically a cable modem and router wireless combined.

  The normal daily LAN side of the network was the default installation to receive an IP address via DHCP from the superhub in range 192.168.0.1/24.

  At first, I thought I could put things in preparation for my lab installation, by configuring the LAN subnet using 192.168.0.0 and superhub of/16 mask rank for my 'everyday' network and 192.168.1.0 rank for my "laboratory at home." (Good or bad?...)

  Unfortunately, I'm unable to do so because the superhub only allows the last byte in the mask to be changed, so I changed the mask and it now reads 255.255.255.128, with the idea that I can always have 2 separate networks.

  In the photo above you can see devices on the right side are all directly related to the superhub and continue to work as usual.

  On the left side is where I've implemented a Cisco 1841 router and a laptop computer to test.

  The details of each device are;

  Blank Superhub
  LAN:192.168.0.1
  The DHCP scope: 192.168.0.2 - 192.168.0.126

  Cisco 1841
  Fast Ethernet 0/1: 192.168.0.126
  255.255.255.128

  Fast Ethernet 0/0: 192.168.0.129
  255.255.255.128

  PC2 (mobile wired connected to FE 0/0)
  IP: 192.168.0.200
  255.255.255.128
  Default gateway: 192.168.0.126 (the address IP of Cisco 1841)

  Someone would be kind enough to look at this and tell me where I'm wrong please?

  I thought about pulling the superhub completely, but I am bound to her by my ISP :(

  Hello

  It of a little early in your studies for this :) but implementation of your knees it should work:

  1841 router:

  int fa0/0 (interface connected to the hub)
  IP 192.168.0.126 255.255.255.0
  NAT outside IP
  No tap

  int fa0/1.2
  encapsulaton dot1q 2
  IP 172.16.0.1 255.255.0.0
  IP nat inside
  No tap

  int fa0/1 (interface connected to)
  No tap

  NAT configuration:

  access-list 1 permit 172.16.0.0 0.0.255.255
  IP nat inside source list 1 interface fa0/0 overload

  Add a default route:
  IP route 0.0.0.0 0.0.0.0 192.168.0.1 (so your router knows where to forward DNS queries to 8.8.8.8)

  Connect your 3560 to the second port on the router and configure a trunk on the switch port and add vlan 2:

  int fa0/0 (connected to the 1841 router)
  switch to trunk encapsulation dot1q
  mode trunk switch

  VLAN 2
  name Home_Lab

  Connect your PC to the second switchport and add vlan2:

  int fa0/1
  access mode switch
  access switch vlan 2
  No tap

  Finally, give your PC an address in the subnet of vlan 2:

  IP: 172.16.0.2
  Mask: 255.255.0.0
  Gateway: 172.16.0.1
  DNS: 8.8.8.8

  You should be able to ping the address of the router on the subnet in 172.16.x.x 192.x.x.x. I don't have a Virgin hub to test this, but it worked well with two 1841 routers.

• Help: The ESXi host has no persistent storage

  We have an ESXI 5.0 installed on our Dell server and we have some virtual machines running. suddenly, we had a mistake on Vsphere client.

  "EXSI host has no persistent storage.

  To run the virtual machine, create at least a data store for the maintenance of the machines virtual and other system files. »

  to resolve this problem, so we tried.

  On Vsphere client (connected to the ESXI)-> configuration-> storage-> rescan all... once the re-scanner has been done.

  We are able to see the file was mounted on the data store and it is lost in a minute. so it isn't permanently mounted to the data store to access the virtual machine.

  Once we do the re-scan once again, we saw that the file has been fitted to the data store and lost again.

  assemble and disassemble is to continue to switch.

  We need a solution to fix the problem, or in the worst case we need a way to recover the Esxi machine (VMS) data.

  Kindly share the reflections.

  It should be a disk error, it is local storage that tempt you and the virtual machine files are stored in the local disk

  don't forget to check the logs on the bit/ucs, regardless of the remote management tool, you use...

  Please check the log files and vobd.log vmkernel

• help building cloud

  Hello, I want to download indesign creative cloud, and when he goes by 42% the download stops. I have "errors encountered during the installation (21)". help please
  

  even if it is for ps, follow the same suggestion, Error 21 or DW021 when installing Photoshop CC 2015

• Home Server - Help Build ESXi

  Hey,.

  I struggled to create a base of ESXi due to compatibility server.  Here's my current version:

  Intel i7 4790

  Gigabyte Z97 - HD3

  2 x 1 TB Western Digital hard drives (SATA)

  Ballistix 16 GB DDR - 1866

  I realize that my motherboard is not compatible (now that I bought it).  First of all, it was the NIC, now he does not see the HARD drive.  I bought an Intel NIC who works with ESXi.  If I buy a RAID controller, that gets me around the issue of compatibility?  Did I meet problems more?  Or what is the motherboard cheaper who will work with a LGA1150?  I struggled with this too much and I just want to find the easiest way to make this work .

  Thank you very much for your help.

  Hey Mate,

  I recently bought a card mother-GA-Z97M-D3H (with i7 4790) to run ESXI 5.5

  I'm came across this post while searching for an answer - I found one, so I thought I'd share (should work as well for your motherboard, I don't think there is a big difference).

  The answer lies in the drivers, ESXi 5.5 does not have the drivers of NETWORK card or sata-xachi right.

  You can get these in a format VIB here:

  (File VIB itself) NIC VIB file: www.tinkertry.com/install-esxi-5-5-with-realtek-8111-or-8168-nic/

  (File VIB in the links at the bottom of this page) sata-xachi: http://vibsdepot.v-front.de/wiki/index.php/sata-xahci (this site seems broken, if you are looking for and go through the main page, it can charge, it is a copy - paste the right link...)

  Then, you will need to inject into the iso ESXi 5.5 via the customizer of ESXi (www.v-front.de/p/esxi-customizer.html).

  Then install your iso ESXi personalized on your machine (I used Rufus for this: https://communities.vmware.com/thread/457760 ).

  Good luck!

  p.s. the VIB attached files if you do not want to visit the sites.