Help! confused about the settings of windows 8 here

Similar Questions

• Question about the installation of Windows repair

  Hello

  I have searched through the forum, but I'm still a bit confused about the use of the recovery expert mode on my Toshiba Recovery CD.
  I can't boot into Windows at all. I didn't save my data (stupid!).
  I currently have a single partition.

  It is possible to create a second partition use the recovery expert mode and re - load Windows to that. Would this format only partition, allowing me to recover files after the first partition?
  Or is this format the entire disk, Windows loading and then create partitions?

  Any advice greatly appreciated.

  Thank you

  Fitz.

  Hello Fitz

  Expert mode allows you to do two things:
  1 install OS already persistent partition (if the HARD disk already has two of them)
  2. create own partition (in this case all of the content is deleted)

  Please try to start in safe mode (press F60). If this doesn't help, you can track to save your data:
  1. connect the HARD drive to the other PC as external device (using the box USB HDD)
  the disk HARD should be recognized automatically and you can copy your data to another disk HARD of PC
  2. you can try to use Partition Magic tool. Start by using the external floppy drive and create two partitions. After doing this start your laptop with discus throw and try to copy all the data on the second partition.

  Detailed explanation of the installation in expert mode and how to create a clean partition you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4462&messageID=14518

  If you have more questions please write again!

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• There's no need to change the settings for windows update on RT

  Hello

  I can't find the option to change the settings for Windows Update on Surface with Win RT.

  I searched through the forums and answers, but on the left side of windows update, there is no option to change the settings on my surface.

  My windows update is configured to "Automatically install updates" and I can't change it.

  Thanks in advance for your help.

  Milan

  Configure your WiFi connection as connection meter and then check the settings of the meter connections - it allows to disable some updates and other actions which are data, unless you run them manually.

  Read this: http://windows.microsoft.com/en-GB/windows-8/metered-internet-connections-frequently-asked-questions

• When im trying to add a family film about the Director of windows it is not not all there, he's going for about 20 seconds, then on the next image

  original title: video editing

  When im trying to add a family film about the Director of windows it is not not all there, he's going for about 20 seconds, then on the next image. How can I see the video in its entirety, but long, so I can change it to what I want?

  What is the extension of the home movie file?

  Windows Movie Maker doesn't accept the formats of files (extensions) following:

  Video files: ".asf", ".avi", ".dvr-ms", ".m1v", ".mp2", ".mp2v", ".mpe", ".mpeg", ".mpg", ".mpv2", '.wm' and '.wmv '.

  * Extennsion file or the file format is represented by the last 3 letters of the file.

  If the file format of your home theater is not on the list above, google for a FREE video converter and a change in WMV format. Then re - import to Movie maker.

  WMV is the most reliable and foolproof format for Windows.

• I would like to know the details about the license of Windows PE, terms and political Conditions of Redistribution.

  Political pe Windows license, the terms and conditions of redistribution

  I would like to know the details about the license of Windows PE, terms and political Conditions of Redistribution

  For more information of WinPE 2.0, you can consult the following articles:

  http://TechNet.Microsoft.com/en-us/magazine/cc138016.aspx

  http://TechNet.Microsoft.com/en-us/magazine/cc160884.aspx

  http://TechNet.Microsoft.com/en-us/windowsvista/aa905120.aspx

  J W Stuart: http://www.pagestart.com

• Confused about the notion of VLAN

  I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?
  MGMT is on vlan 4093
  DHCP is on VLAN 100 trunk e34 10.10.1.1
  Host 1 is on VLAN 200 trunk e34 10.10.2.1
  Host 2 is on VLAN 300 trunk e34 10.10.3.1
  active IP routing
  
  

• Confusion about the size of the array in Oracle 11 g

  There is confusion about the size of a table. When exporting schema 'CRESTELWOMPRD601', the log file shows:

  _____________________________________________________________________________________

  . . exported "CRESTELWOMPRD601." "' TBLRSUBSCRIBERFIELDWORK ' lines of 12.62 GB 35568

  ____________________________________________________________________________________

  which may involve the size of the TBLRSUBSCRIBERFIELDWORK table is 12.62 GB.

  But when I find the size of the table using the query:

  SELECT nom_segment, BYTES / 1024 / 1024 "SIZE (MB)" FROM dba_segments where owner = 'CRESTELWOMPRD601' and nom_segment = 'TBLRSUBSCRIBERFIELDWORK. '

  He said that the size is only 9 MB for the TBLRSUBSCRIBERFIELDWORK table.

  I hope that my request is clear that there is no clarity on the size of the TBLRSUBSCRIBERFIELDWORK table.

  Please get back with the answer to my query

  
  

  Concerning

  Dba_segments indicates the space allocated to the segment while expdp indicates the size of the exported data, so if you had a table with a measure of 1 MB, but no data, dba_segments would 1 MB and expdp would report 0 bytes.

  John

• Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation

  Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation. I learned to know to install Oracle R12 apps, you have to install VM Box for Oracle Linux OS.
  I'll be very grateful, if someone can provide the documentation for installing the software. (Please complete documentation)

  Thank you and best regards,
  Isabelle

  Hello Vero,

  You can find information on documentation of the product for Oracle VM and Oracle VM templates on the following link:

  http://www.Oracle.com/technetwork/documentation/VM-096300.html

  You can find more information about Oracle VM on the following knowledge article, let me know if you have access to My Oracle support.

  Model of machine virtual of Oracle for Oracle Siebel CRM - Quick Start Guide (Doc ID 951872.1)

  Best regards

  Chetan

• HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  The work path is a vector and infinitely scalable, but when caress you, Photoshop sets the pixels on a layer following the path.  These pixels are rasterized and based and cannot be resized without loss of quality.  You have options.  If you want to enlarge the raster layer, transform the work path and stroking again.  Or work at a resolution higher, in the first place.

  Either incidentally, you can't trace a path with the pen, because it's a vector tool, and caressing is a matrix function based.

  

• Confused about the extension of the Sprite class

  Howdy-

  I learn programming with object oriented ActionScript and am confused about the class Sprite and OO in general.

  My understanding is that the Sprite class allows you to group a set of objects that you can manipulate all the objects at the same time.

  I explored the Open Flash Chart code and note that the main class extends the Sprite class:

  Base/public class extends Sprite {}

  What this lets you do?

  Also, on a related note, how to draw, say, a line once I extended?

  Without extend Sprite I could write:

  var graphContainer:Sprite = new Sprite();

  var newLine:Graphics = graphContainer.graphics;

  ...

  And it works very well. Once I have extend the Sprite class, I'm lost. How can I modify this code so that it still draws a line? I tried:

  var newLine:Graphics = this.graphics;

  My understanding is that since I extend the Sprite class, I should still be able to call its method chart (or property? I have no idea). But, he screams at me, saying "1046: Type was not found or is not a constant of compilation: graphs.»

  A number of things.

  First of all, I would not use this approach in your table constructor. Setting the width and height only makes sense if you adjust the width and height of the existing content, and the table (Sprite) does not at this time here. If you want to give the table a 'size', you could do it like this:

  public function Chart (width: Number, height: Number) {}
  This.Width = width;
  This.Height = height;
  put in a background invisible to this size:
  this.graphics.beginFill (0,0);
  this.graphics.drawRect (0,0,width,height);
  }

  There are other ways, including putting in a form or a Sprite of child as a child for the background so that clear will not erase the background of the chart. This way you could have properties for the background in your table class and update the background as a child DisplayObject instance... a few ideas to think to...

  Then, after that, your chart should be functional...

  Then back in your scenario, you could do this:

  import graphics. Table;

  Stop()

  var myNewChart:Chart = new Chart (300,200)
  myNewChart.render ();
  addChild (myNewChart)

• Confused about the sequence settings

  I have some footage from 23.976 960 x 720 P2 in a new project PP.  I want to use my Kona convince to watch.

  There is no presets sequence for this... 23.976.

  But if I make a 720p25 OR a p 720 29.97 OR 720 p 59,94 sequence, I stick all my images in them and see my images through the Kona with no rendering bar at all.

  I'm confused.  I thought that if does not match the sequence and the sequence, I have to make all my images to conform to sequencing.  I'm glad I don't have to make, but I wonder what can go wrong later if I continue to edit this project at the rate of 'bad '.

  What happens here, and should I be worried?  Does it matter what the frame rate of the sequence?  (My deliverables are web videos.)

  Coming from FCP, it sounds crazy... or the magic.

  Jim,

  Do not make the foregoing; It will not create a sequence that will work with your hardware.

  I'm surprised that AJA have 24 p (23.976) sequence presets, but maybe it's like that. Try to open the dialog box new sequence and select one of the presets 720 p AJA you already mentioned. Click the settings tab in the dialog box and under the drop-down list in Edit Mode to see what AJA 720 p modes of edition you have. Choose this one, if it isn't already, and then change the timebase of 23.976. You probably won't have to change anything else; If everything looks good, save a pre-selection, so you can quickly access these settings the next time that you need to create a similar sequence.

  You must use the AJA editing modes to activate the output through the Kona card, and it is important to use a time base that corresponds to your images (most of the time) since that affects the way that managers are made for the exit. And don't be surprised if you do not have to go to Premiere Pro - it's the name of the game

  If everything above do not, check out please let me know.

• Confused about the use of Fusion and boot directly to Windows via Bootcamp?  I thought that my installs would be synchronized?

  Recently, I installed Win 7 64 Ultimate using Bootcamp on my iMac 27 inches in 2010. It wasn't a problem. I then install Fusion 3.1 and import my install of Win 7 Bootcamp. Everything went well. I am using version VM to work related things which requires Windows and did not start directly into Windows for the first time, I installed and applied all the updates.

  Anyway, today I wanted to start Windows to the demo of a game. No much, that the installation of Windows seems work fine. But, I expected to see all applications and files installed there is just the way I did in the virtual machine. I thought they were basically the same facility and would be fully synchronized, but they are not.

  I'm doing something wrong or is it the way it is supposed to work?

  Is it possible to make two "versions" be the same whether in the machine virtual or kick directly?

  Because you 'imported' you see the expected behavior because an import is completely separate and apart and not linked to the original.

  On the other hand had you just clicked the button Start Up on Boot Camp entry into the library Virtual Machine, then you'd be using native installation as a VM.  However, a word of warning is in order that WPA (Windows Product Activation) can be problematic, Microsoft may require you to have two separate licenses and this is beyond the control of VMware when VMware Tools fails to control who after he activated in each environment.

• Confused about the capacity of the HARD drive on my new Equium L350

  I'm rather confused (normal state) about the capacity of my hard disk. This is supposed to be 120 GB but... On 'My computer', it shows that I have 23 GB of 55.7 left GB on Vista C and 49.8 54.5 on E of data that is delivered to about 110 GB.

  I'm already about 10 GB missing but maybe that is taken up with hidden files. More worrying is that I have so little space on Vista C. Can I save files on the data partition, or is that a no-no? So far, everything I've loaded on it goes into Vista C.
  Any help would be appreciated.
  Thank you

  I agree with InvaderZim.

  But there should also be another reason why the two partitions of HARD drive are smaller than the whole HARD disk.

  I assume you are using the Vista operating system.
  Vista uses hidden for some files from recovery partition.
  If you check the Disk Manager, and you should see all available on your HARD disk partitions.

  See you soon

• Question about the installation of Windows XP Home edition on two laptops Satellite A200

  Hello everyone,

  I have 2 laptops (Toshiba Satellite A200) but in different model
  A200-1z3 and A200-1ub
  I need to install XP on them and they have VISTA OS

  I have the drivers but I've heard that I need to install the driver SATA HD

  I heard about a program called [NLITE]
  I'm not sure what to do.

  Could you help me please!

  Note:
  Windows XP Home for A200-1ub so I can I use it for other phones
  Please accurately.

  Thank you

  Hello

  You should search here in the forum for similar topics and you will find the answer soon ;)

  Just for the note;
  Toshiba has published several documents that might help you to install the SATA drivers and to include it in the XP CD:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Driver SATA can be found on the Intel page too. An Intel Matrix Storage Manger contains these files needed to SATA.
  Please look for the IMSM package that contains the folder 'F6flpy '!

  Big names