Help me choose the best, it will be a gift T_T

Similar Questions

• HP 3050 - can't choose the BEST Option for printing

  I just bought this new printer today, I got up this set-up to work via my wireless network, and it's great, a little violin, but at the end of the day it works, but for some reason that I can't print at BEST under properties its all gray of any reason why I can't select all. I did the alignment of cartridges and everything was going good impressions are all straight and what not I print on plain paper 80 gr normally I get 100GSM but it was very expensive store, I went also, the version of the software from the CD I got with the printer is V12.3.1 is this is any help.

  I noticed that I can choose the media and choose the best quality of plain paper, but who has just basically telling the printer that I use a GSM high appreciation paper dosnt it.

  Hello.

  For this model, the driver settings are a little different.

  To set the print quality, select support options unter the paper/quality tab, need you to seklect the type of media and the print quality according to.

  Shlomi

• Need help to define the best settings of the picture on my TV 32RL938

  I recently bought a Toshiba led TV 32RL938 I need help for my photos, anyone help me put the best images for movies and channels... contrast, brightness, standard, dynamic...

  Each new product is document s user manuals. What you need is described here, so I think that you should not waste your time here but check this in manuals and test it on your TV.

  You must learn how it works.

• Help me choose the HP Pavilion Desktop PC

  Hello!

  Please help me choose the HP Pavilion Desktop Pc which has 3 features-

  1 150 - 200W power consumption.

  2. easily extensible.

  3. must have Windows 7 Upgrade offer with it.

  I'm of the India, I chose only the PC models to choose among them.

  Kind regards

  ErSehmi

  HP Pavilion dv6516tx Intel Core 2 Duo T5250, 2 GB DDR2, 160 GB SATA, Nvidia GeForce 8400 GS, Segate wireless LAN, remote Media Center, Windows 7 Ultimate OEM, Authentec fingerprint reader.
  HP Pavilion m9430in Inter Core 2 Duo E7300, 4 GB DDR2, 1.5 TB Seagate SATA, Nvidia GeForce 9300 map THE, WLAN, TV Tuner, DVB - T integrated with remote control, wireless HP keyboard - mouse, 2309 m TFT LCD, Windows 7 Home Premium OEM.
  HP Pavilion p6040in Inter Core 2 Duo E7400, 3 GB DDR2, 500 GB Seagate SATA, THE Nvidia GeForce 7100, LAN, wireless keyboard - mouse, HP 2009f TFT LCD, Windows 7 Home Basic OEM.
  
  

  Already a customer of HP for the past 6 years. HP has impressive Technical Support (phone Support + Service Center Support) - India

  I have the following models-

  1 HP Pavilion Elite m9430in PC with HP Full HD 2309 m LCD TFT (Brilliant ++ purchase ever)

  2 HP Pavilion Notebook dv6500tx

  And the new that I bought last week is -.

  HP Pavilion p6040in with HP Full HD LCD TFT 2009f.

  A big thank you to everyone for their suggestions!

  Kind regards

  ErSehmi

• Please help me choose the right format mask

  Hello everyone.

  We use Oracle 11.1.0.7 RAC.

  Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:

  NUMBER VARCHAR2

  0,123 0.123

  12345678-12345678

  12345678.1234 12345678.1234

  12345678.123 12345678.123

  12.00000008 12.00000008

  WITH data AS
          (SELECT 0.123 n FROM DUAL
           UNION ALL
           SELECT 12345678 FROM DUAL
           UNION ALL
           SELECT 12345678.1234 FROM DUAL
           UNION ALL
           SELECT 12345678.123 FROM DUAL
           UNION ALL
           SELECT 12.00000008 FROM DUAL)
  SELECT
       TO_CHAR (n)
  FROM
       data;
  

  Thank you, Dmitry.

  Hi, Dmitri,

  Dmitry Dunaev wrote:

  Hello everyone.

  We use Oracle 11.1.0.7 RAC.

  Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:

  NUMBER VARCHAR2

  0,123 0.123

  12345678-12345678

  12345678.1234 12345678.1234

  12345678.123 12345678.123

  12.00000008 12.00000008

  1. WITH the data AS
  2. (SELECT 0,123 n FROM DUAL)
  3. UNION ALL
  4. 12345678 SELECT FROM DUAL
  5. UNION ALL
  6. SELECT 12345678.1234 FROM DUAL
  7. UNION ALL
  8. SELECT 12345678.123 FROM DUAL
  9. UNION ALL
  10. SELECT THE DOUBLE 12.00000008)
  11. SELECT
  12. To_char (n)
  13. Of
  14. data;

  Thank you, Dmitry.

  I don't think that TO_CHAR can do by itself.  You should maybe call TO_CHAR and then manipulate the output a bit.

  Looks like TO_CHAR with 1 single argument does exactly what you want except when it returns a string starting with a decimal point, in which case you want to concatenate a '0'.  So call TO_CHAR with 1 argument, see if returns the string begins with a decimal point and, if so, put a '0' on it, like this:

  WITH got_str AS

  (

  SELECT n

  TO_CHAR (n) AS str

  FROM the data

  )

  SELECT n

  CASE

  WHAT LIKES str '. %'

  THEN "0". Str

  Of ANOTHER str

  END AS str0

  OF got_str

  ;

  Output:

  STR0 N

  ---------- -----------------------------------------

  0,123.123

  12345678-12345678

  12345678.1 12345678.1234

  12345678.1 12345678.123

  12.0000001 12.00000008

  What do you want for greater than-1 negative numbers?  You may need to make the CASE a little more complicated expression, like this:

  WITH got_str AS

  (

  SELECT n

  TO_CHAR (n) AS str

  FROM the data

  )

  SELECT n

  CASE

  WHAT LIKES str '. %'

  THEN "0". Str

  WHEN the str LIKE '. %'

  THEN '-0 "|" SUBSTR (str, 2)

  Of ANOTHER str

  END AS str0

  OF got_str

  ;

• Need your advice, choose the best update for first Pro CC

  Need your advice, choose the best upgrade.

  Because nobody can have a computer that runs all functions as quickly as desired, we have manage their it resources according to your needs, budget and for the money. Below is a fundamental issue related to Adobe Premiere Pro 2015 CC.

  Need for better visualization without jerky look of a stutter and overall better performance incease.

  Would I do better with? (Choose one please)

  1. Passing of an SSD to 2 SSD in RAID 0 configuration - cost about $350.
  2. Getting my video card NVIDIA GeForce GTX 560 Ti for a NVIDIA GeForce GTX 970 overclocked to 4 GB GDDR5 graphics card - $350.
  3. From Win 7 Pro 64-bit to win 10 Pro 64-bit.

  Please explain why you made your choice.

  
  

  Thanks in advance,

  Tom
  

  Tom,

  At this point, you're pretty much stuck to a GPU upgrade. You see, that the GTX 560 Ti is not is properly supported in first Pro CC 2015 when it comes to acceleration GPU of MPE. As such, you may experience random program crashes and/or repeated which are fixed only when you disable acceleration GPU of MPE and run first in software mode only MPE.

  The other improvements are out of the question: the i7 990 X CPU uses the chipset Intel X 58 now-seven-year-old, whose native Intel SATA ports are limited to SATA II (3 GB/s or 300 MB/s) flow. All support 3 SATA or USB 3.0 on motherboards that use such an old chipset comes entirely from complement third-party chipsets to companies such as NEC/Renesas and Marvell. And we know how slow the Marvell SATA 3.0 ports work are compared with native Intel SATA 3 implementation on newer chipsets. Unfortunately, a CPU upgrade would have exceeded the maximum budget $ 350 because both the CPU and motherboard (and probably RAM as well) should be replaced by such upgrade. And additional SSD upgrades are out of the question because newer SATA SSD would have been restricted by the sustainable maximum rate of 270 MB/s of SATA II.

  Therefore, the only feasible upgrade would be a new GPU for your system now five-years.

  Good luck in your quest to upgrade,

  Randall

• Help choose the best inkjet printer?

  Before buying a new inkjet printer all in one. Please, tale me making problems have computer known less than installing the printer ink jet model and more compatible with a desktop link to dell by using a Usb cable.  Answer soon?

  Bofish,

  All printers put in place the same then choose the printer you want. If you need help setting up, we have a forum for the printer to help you.

• Help me choose the right laptop model Linux Fedora compatible

  Hello

  Could you help me choose a laptop?
  It must be:
  (1) * compalible * Linux (Fedora 10/9)
  (2) rather * lite *.
  (3) Goog designed
  (4) powerful
  (5) no camera (optional)
  --
  Sorry for my bad English.

  It depends on the purpose of your laptop (eg. portability vs gaming). With respect to the components, peple might disagree with me, but I recommend to choose configurations Intel Centrino. This means that the a mobile processor from Intel, Intel Chipset, Intel Graphics and Intel wireless adapters.

  The reason is that that Intel components usually work out of the box with Linux, Intel still provides open source drivers, even for the acceleration hardware 3d. Even if the yield is low compared to ATI or Nvidia.

  I don't know, however, if a Toshiba laptop is the best solution. Computers laptop Toshiba have a large number of soft keys, etc. then you might be required to do a lot of tweaking.

• How can I choose the image that will appear as 'image of departure', the one that is displayed when the video has not yet been clicked.

  Hello, I would like to know How to Choose the video image which will be appear in the form " ", "boot image", that image that appears when the video has no was clicked yet.» The image all can see before viewing the video.
  Thank you, Pedro Paulo

  You can change the image poster of clips in the icon view. By default, the first image of a clip appears in the thumbnail viewer and in other places in the Bill where the thumbnail is displayed. You can override the default thumbnail by designating any clip image as a poster frame.

  To set a poster frame for the icon, drag the playback slider or shuttle to the desired image and press the keys command + P (Mac OS) or SHIFT + p (Windows).

• Need help to choose the Dell server for new cluster... What are you using there?

  The best host that I have is a 2950 with 16 GB and I need to buy three more ESX host to be part of the cluster of 2950.

  Wwhat should I choose which would be the last and the largest and still be compatible with the 2950 for vmotion?

  Thank you!

  R710 is a good choice and with EVC could be VMotion compatible with 2950 old without major problems.

  If you need more CPU power to also consider R810 system.

  If you need a lot of RAM check R910.

  But (IMHO) the R710 is a good choice of Dell portfolio.

  André

• Need help to choose the correct setting in the virtual network Editor

  This is my first time using machines virtual period. What I do is implementing a laboratory MCSE to follow certain CBT courses, I bought. I created a team of three virtual machines - two of them that are running WIndows Server 2003 and the other WIndows XP. The lab wants to use the following TCP/IP parameters for the three machines (Server1, Server11 and XP1)

  Server1:

  192.168 1,201

  255.255.255.0

  192.168.1.254

  11 server: 192.168.1.211 (same gateway and subnet as Server1)

  XP1: 192.168.1.1 (ditto for the door and the subnet as Server1)

  Primary DNS is set to 192.168.1.201 (Server1 is DNS server).

  Default VMWorkstation allowed me to ping both servers very well without any additional configuration. My problem is when I try to fix the DNS redirector on Server1. Any DNS server IP address that I plug in I could not get my XP box to get out of the Internet. I know it's a problem with my virtual network settings, I'm sure. Problem is I don't know where to start. Can someone point me in the right direction?

  Thank you!

  General things:

  You cannot use the IP address ranges which are used somewhere else, and that the host might be able to see.

  Type ' ipconfig/all' on the host and the glance to the adapter VMnet8. Suppose you see a 192.168.30.1 there. This means that your network VMnet8 address is 192.168.30.0/24 (24 =, displayed subnet mask as 255.255.255.0).

  Your DNS and gateway for virtual systems would be 192.168.30.2.

  You can check this in the editor of virtual network on the NAT tab.

  To change the range of network addresses VMnet8 you must use the virtual network Editor.

  1. go on 'host Virtual Network Mapping.

  2. click on the ">" beside VMnet8 and choose "subnet".

  3. change address you need. It's the network address, so the last digit (in your case!) should be 0. The address range should not be used elsewhere (physical network, VMnet1).

  4. click on 'apply '.

  5. When you click on the ">" again and choose DHCP or NAT you can see that all addresses have been changed accordingly.

  When you enter ' ipconfig/all' to the host, you will see that the VMnet8 host adapter has an IP address of your selected range with 1 node address (e.g. 192.168.1.1).

  The gateway and the DNS so its node address + 1 (192.168.1.2).

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• can someone help me choose the right program to open my file on the desktop?

  Try to open the game of chess. It prompted me to choose another file to open chess game of Titian. So I did it by clicking on the internet window explore. now all the progress or files on my desktop changed for symbol (e) of the exploring on them and I can't open them. I don't know how to get it back. Can someone help me?

  Hello

  I would like to know the operating system you work with.

  Method 1) when you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Method 2) in case if it does not help, you must change the associated file. To change the file association for a specific file, you must first display the properties of the file.

  1. You can view the properties of a file by selecting the file and choosing 'Properties' in the file menu. Or you can simply right-click on the file and select "Properties" from the context menu that appears.
  1. To change this file association, click the button change.
  1. You are given a list of recommended programs to open the file, as well as several other programs on your computer. The recommended programs are programs that Windows knows is going to be able to open the current file type. For this reason, choose a program from the list of recommended programs is a good idea. You can choose a program from the list of other programs, but the file cannot open.
  1. You can change this program opens all documents of a certain type of file, and then click the checkbox "Always use the selected program to open this type of file."
  1. Click OK

  Check the link for more information:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Icons change incorrectly in Windows

  http://support.Microsoft.com/kb/2396571

  Note:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  It may be useful

• I bought an Aspire One opportunity and need help to choose the right RAM upgrade.

  I bought an Aspire One opportunity. On the device, the model number is listed as AO532h-2588. When I enter the S/N and look it up on the Acer website it is listed as AO532h-2Db. I want to move the RAM to 2 GB. Former model, then tried to keep the cheap. I see 200 pin DDR2 667 MHz PC2-5300 SODIMM as given common spec as far as RAM goes. Even through different products of PC. Is this all I get? That the annex-2588 or - 2Db question of difference in the review of correct choice? Thanks for your help!

  I need to stick with 200 pin DDR2 667 MHz PC2 - 5300 SODIMM? Yes

  But I can go up to 800 MHz. good. PC2-5300 and SODIMM is critical to search? No, but it will be worse to run (little).

  Look at the essential link.

• Help to find the best way to interior design (Nested Loops of sliders?)

  Oracle 11G

  First here the table I work with, for example data

  ID	FID	ANNOTATION	DESIGNATION	LOW	HIGH	SEQ
  1	1008755360	FC1053, 81-82	FC1053	81	82	1
  2	1008755360	XD, 3-24	XD	3	24	2
  3	1008756293	FC1053, 81-82	FC1053	81	82	1
  4	1008756293	XD, 3-24	XD	3	24	2

  Each FID is a different line, these two lines are connected physically, that's why I've shown them here on the table. Each line has a 'meter', in this case, each line has 2 lines of account that are the same.

  

  From there, we can say that FC1053, 81 and 82 are connected between the 2 cables. XD DESIGNATION means that cables are connect not really so I can't ignore those.

  We have a different way to show that they connect other than only those data and I need to connect each other too much. For this I need the Info

  FID1	LOW	HIGH	FID2
  1008755360	81	82	1008756293

  So my first design was the hepatitis hase sliders 2 with the data in the table, as shown above. I would then have a nested loop. The first slider to select the first record, then go down to the second loop where I compare all other records the first record and then go back in the outer loop to move to the next record, then return once again to the inner loop to compare the values again.

  LOOP1

  LOOP 2

  If LOOP1. IDF! LOOP2 =. IDF THEN

  IF LOOP1. ANNOTATION = LOOP2. ANNOTATION THEN

  -CONNECT THE DATA

  ON THE OTHER

  IF LOOP1. DESCRIPTION = LOOP2. DESIGNATION THEN

  IF LOOP2. LOW BETWEEN LOOP1. LOW AND LOOP1. THEN HIGH

  IF LOOP2. HIGH BETWEEN LOOP1. LOW AND LOOP1. HGH THEN

  -CONNECT THE DATA

  END IF;

  END IF;

  END IF;

  END IF;

  END IF;

  END LOOP;

  -Open and close done to reset the cursor to the front/top

  CLOSE CURSOR LOOP2;

  OPEN CURSOR LOOP2

  END LOOP;

  The problem with this approach is once the outside loop moves the next value of the IDF, that logic will connect them once again, but this time with the FIDs reverse which is essentially the same thing as it does not matter the direction in which they are connected. I almost feel that once I found the link I need to remove that line from the cursor (which isn't possible).

  FID1	LOW	HIGH	FID2
  1008755360	81	82	1008756293
  1008756293	81	82	1008755360

  I was able to

  1. make a list of all those I have connected and check against that

  2 use some kind of collection

  3. use a temporary table to hold the data

  4 something that I have not yet thought

  I really appreciate in advance for any help I get.

  If your query mapping is correct, this is the result of your query with the addition of the values of sum for the strand/down running.  Manually change the incorrect in the output bit numbers so that we can move on to find another solution.

  with gc_count like)

  Select

  Sum(current_high-current_low+1) on strand_high (g3e_fid seq order partition),

  Sum(current_high-current_low+1) more (partition of g3e_fid order of seq).

  strand_low (current_high-current_low),

  t.* from b$ gc_count t

  )

  Select

  a.g3e_fid, a.current_designation, a.current_low, a.current_high, a.strand_high, a.strand_low,

  b.g3e_fid, b.current_designation, b.current_low, b.current_high, b.strand_high, b.strand_low

  gc_count a, gc_count b

  where a.g3e_fid in (1008757155,1008757159,1009999655)

  and in b.g3e_fid (1008757155,1008757159,1009999655)

  and a.g3e_fid > b.g3e_fid

  and ((a.count_annotation = b.count_annotation)

  or (a.current_designation = b.current_designation

  and a.current_low b.current_low and b.current_high and a.current_high between b.current_low and b.current_high)

  order of b.seq

  /

  G3E_FID CURRENT_DESIGNATION CURRENT_LOW CURRENT_HIGH STRAND_HIGH STRAND_LOW G3E_FID CURRENT_DESIGNATION CURRENT_LOW CURRENT_HIGH STRAND_HIGH STRAND_LOW

  ---------- --------------------- ----------- ------------ ----------- ---------- ---------- --------------------- ----------- ------------ ----------- ----------

  GAGA GAGA 1008757159 1008757155 1 1 2 2 1 2 2 1

  1008757159 3 8 8 3 1008757155 3 8 8 3 F1DM F1DM

  1008757159 9 10 10 9 1008757155 9 10 10 9 F2 F2

  1008757159 11 14 14 11 1008757155 11 14 14 11 F1DM F1DM

  1009999655 17 18 6 5 1008757155 15 18 18 15 F2 F2

  1008757159 15 16 16 15 1008757155 15 18 18 15 F2 F2

  1009999655 21 24 4 1 1008757155 21 24 24 21 F2 F2

  7 selected lines.

  Elapsed time: 00:00:00.06

• Let the customer choose the best picture?

  I'm a Signmaker. How can I give customers evaluate Adobe Stock

  Choose an image that I will use on their sign. I'll buy the image as part of my subscription

  based on the number of image. I didn't really want to land on the front of new users page - 10 free images if they register ect.

  Sign in to your account on creative.adobe.com and go to "Creative Cloud Files.

  

  Select "Libraries" in the side menu...

  

  In the drop down menu to each library, you will see some options of the library share. E-mail or work options generally that you want to use. Simply follow the instructions after you have made your selection.