Similar Questions

• Problema al Extender en disco esxi 4.1

  A saludo a todos los compañeros of este foro.

  Paso a mi explain problema: Tengo virtualizado bajo Vmware Esxi 4.1, a Server 2008 64 bit R2, in el cual tengo back discos duros (office), 30 GB C: y 120 GB D:. Problema mi ha venido a raiz that el espacio in the unidad C: (disco del sistema), quedo muy pequeño. Entonces, procedi a MV e incrementar el tamano para a 80 GB, en the config of the MV. Al iniciarlo posteriormente, vi in the system, the administration of Equipos en, as el disco C: seguia a 30 GB pero that tapeworm 50 GB mas particionados, pero sin iniciar in el mismo disco.

  Reading en Internet, procedi a unite las back particiones, mediante misma tool del Windows 2008. Al reiniciar MV, in the administration of equipos, el disco duro C: is 80 GB, pero UN disco como muestra if lo veo por el explorador, el disco duro con sigue UN size of 30 GB y espacio 0Ko I have.

  Why el Explorador de Windows me sigue showing el tamano antiguo y tanto el administrator of discos, como el diskpart me than muestra el disco-tiene 80 GB?... What me falta hacer o what he done wrong?

  Of photos, the guia thank me orientar can a delivery este problema.

  Saludos,

  Daniel

  Hola

  The problem would be in Quebec no is extendio el volumen en windows, mira following link:

  The partition size is extended, but the file system remains the original size when you extend an NTFS volume

  http://support.Microsoft.com/kb/832316

  How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008

  http://support.Microsoft.com/kb/325590

• Feature request - help font size - don't forget adjustment

  Hello

  I work with 11.1.1.7 & 11.1.2.3 Jdev and slowly going blind.

  In the help font sizes can be increased and I usually have to increase the size.  However, if I close the help, then later go back inside, the police, the sizes are tiny - back and I have to press the size button increase 6 times (requiring two clicks for each increase in size) to a comfortable size.

  1. can you please put a memory for the font sizes?

  2. can we set up a slider control or something more easily increase the font?

  Thank you

  Stuart

  Hello

  There is no such functionality. I took a note and will table an ER do this in a future release.

  Frank

• Change the block size? vSphere ESXi 4.1.0.

  Hello world

  I wanted to create a third virtual machine, but the existing computer hard drive was large (GB 266), because I had created a VMFS with 1 M block :-(

  I searched a lot of log and manuals, but I couldn t find an answer, how to change the block size of the data to 2 M store.

  I m using vSphere ESXi 4.1.0.

  Then I tried to export the VM´s to set up the new host of VM with another block. But I m not able to find a filebrowser in the vSphere Client.

  How to export or save a virtual machine or a snapshot.

  In the FAQ, it is described to "Open the filebrowser", but where it is hidden?

  Thank you very much for your help.

  Greetings from Hamburg, Ralf

  Right-click on the data store, and select Browse.

• Help Setup RAID SATA for ESXi 4.1

  Hello

  It is the first time that you try to use vmware.  Any help is greatly appreciate!

  I just built a server around the Intel s5500hcvr mother. I have 6 SATA HDD I want to set up in a RAID. The integrated RAID controller seems to be very limited and does not seem to be supported by ESXi 4.1 (when I run ESXi 4.1 installation and it asks for a location for installation, all my discs are individually listed instead of virtual drives that I created with the RAID controller)

  My questions:

  (1) what is the suggested configuration of HDD (RAID levels / number of berries) for ESXi 4.1?  Can I create 1 RAID 10 array and set everything up to that?  or take one of my disks and install esxi 4.1 on it and then create a RAID with the rest of my discs and use it to store data?

  (2) anyone can provide links to some SATA RAID controllers that are known to work with ESXi 4.1 (and is the supposed to recognize virtual readers created by the RAID controller setup ESXi 4.1)

  Your motherboard has a RAID controller software which, as you have discovered, is completely not taken in charge by ESX/ESXi... You will need to get a RAID controller that is on the HCL for SAS and SATA hard drives (not one with battery backup write cache) so you can use any type of RAID configuration.

  My preference for Internal RAID configurations (on the host) are two drives mirrored for ESX/ESXi to reside (preferably being SAS 10 k or 15 k RPM, 73 GB or 146 GB in size) and then another table for the data store. You'll want to keep the data slot store table 2 TB-512 b size in order to present to ESX/ESXi as a LUN. Or you will need to get a RAID card this split of the support to the top of the table in the smaller of the virtual drives that can be presented for ESX/ESXi and LUNS.

  Search for controllers using the LSI MegaRAID chip as a good first lap. Some Adaptec cards should work, but I've seen people post questions on those recent (more recent than in the past). MANY manufacturers rebrand/efficiency the LSI MegaRAID Controllers server, such as the Dell PERC 6 series cards.

  For the use of 4 disks SATA, RAID 10 (on a BBWC, fully supported, controller) will give you the best performance. It will compare with SAS drives however. IF you do not plan on any virtual machine running with anything beyond light IOPS / s then you should be ok (or with very light loads)... If this is going to be a production server, then get the SAS drives all around.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Need help with laptop back to factory settings

  can someone help me on how to put my laptop back to factory settings

  Hello

  It would help if you told us your laptop brand and operating system.

  This is general information on how to do it:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall using the recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the hard drive Partition reinstall back to how you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  See you soon.

• Need help to get back to the way it was when I got it

  My computer is a DellXPS400, age of 4 years. XP operating system. Please tell me how to recover my computer to the way it was when I bought it. I particularlty don't care if I lose the software. It's far too slow. It will only allow me to take it back to July 31, 2011. I want back to the factory. Any help would be appreciated. Thank you.

  Hello

  I recommend you contact Dell support team for assistance on this issue. However, refer to the following articles, which may be useful.

  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• MRT.exe ate my photos. Can someone help me get back them?

  I am running Windows XP service pack 3.  I keep all my photos on a separate hard drive in its own file labled photos.  According to this hard disk a file arrived on labled 00f3f1d25bf937f91f.  When I looked inside this file, it shows that it contains a file called MRT.exe dated 05/17/2011.  As it has been bothering me not let him alone.  Unfortunately however today my mouse, which can be a bit tempemental, rather than open the file of the photo, which was immediately next to this file, moved the photo file to the folder labled 00f3f1d25bf937f91f and won't let me open it.  I tried to move the picture on the 00f3f1d25bf937f91f file, but the system is in place with access denied.  If I look at the properties of the photo file I can even if I can't open it, it shows the size of file as being zero byte.  Can anyone tell how I recover my photos?  I guess they are there somewhere the extrnal HDD is provided by Seagate and on my directory is called FreeAgent drive. It is not used for anything else other than a backup of hard drive that I did not run for a few weeks so wherever the photos went to what they always be you somewhere.
  Besides the above, I'm under full AVG anti virus with firewall suite etc. so I don't know I need anyway this program MRT.exe.  I seem to have three versions of the present on the hard disk at different times.  I have not looked to see where he may have repeated itself.

  Hi kirkleas,

  MRT.exe is the process for Microsoft Windows Malicious Software Removal Tool.

  Microsoft has released a removal tool from Microsoft Windows to help remove software malicious common specific malware on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP. After you download the Microsoft Malicious Software Removal Tool, the tool runs one time to check your computer infections per prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps remove infections it finds.

  The Microsoft Windows malicious software removal tool helps remove specific, prevalent malicious software on computers running Windows 7, Windows Vista, Windows Server 2003, Windows Server

  http://support.Microsoft.com/kb/890830

  Method 1

  Refer to the article below and try to take possession of the records, to check if it helps.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

  Method 2

  I suggest that you start the computer in safe mode and check if you can access pictures on the hard drive.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 3

  If the previous step fails, then analyze and remove any malware or computer virus infections and check if that helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

• help me get back my acount

  I really need back my acount of please help me, I got the last password mail, secret question and answer

  Please carefully follow all of the steps on the Recovery Windows LiveID account Help Page.

  Sorry, we can not help you with your Hotmail account number in the Microsoft answers Forums.

  Cordially,

• I need help to get back on facebook! I asked to change my password more than a month and can't always answer their questions of code just so that I can join!

  HELP ME PLEASE!

  I tried to reset my password facebook more than a month and I can't get it fixed. I just want to be able to get back on my account and enjoy. I don't mind giving my phone number to someone who will address this problem seriously. Let me know as soon as possible!

  
  

  Hello

  Please contact the Facebook Support.

  Facebook Help Center
  http://www.Facebook.com/help/

  How can I contact Facebook support?
  First, select the subject of your question of "list of topics".
  Then select the appropriate contact form or answer your question in this section.
  http://www.Facebook.com/help/?page=835

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Need help with high back and create more space on the computer's internal drive.

  I don't have a lot of space on my internal hard drive.  I just got a backup unit portable 500 GB.  After that I backup everything, what should I do next to create more space on the original disk of disk space?

  Hello

  Here are some steps to free up the memory of hard drive on your computer.

  Method 1: how to optimize disk space everything back to the top
  http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

  Method 2: perform cleaning disc.

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Hope this information helps.
  Please respond back with the State of the issue and let us know if you have any questions.

• Need help to get back running my computer after that I stop.

  After I stop and restart my computer I get this black screen with "floppy Q Seek failure, press F1 or the installer.  When I press F1 it bring back my splash screen, but this isn't a normal start procedure.  Help. What's wrong? I had an accident and brought my computer, with the exception of this.

  Hi Jotennis,

  ·        Do you have any floppy drive installed on the computer?

  ·        Do you not see any drive floppy in the computer window?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  You may receive this message if the floppy drive Q drive is enabled in the BIOS if the boot priority is set to boot from the floppy drive and the CMOS battery is dead or if the BIOS settings are set to default return. You can contact the computer manufacturer to help you disable the floppy drive in the BIOS and check the CMOS battery on the motherboard.

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  I hope this helps.

  Thank you and best regards,
   
  Srinivas R
  Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• help by chance that I got rid of all the admins and need help to get back them

  I played a joke on my father, but he pulled back please help

  Hello

  Yes, you can do this by reinstalling the operating system. To do this, you can refer to the article mentioned below. If the key media and product installation then refer you to the steps provided for in the article mentioned below.

  Installing and reinstalling Windows

  If you do not have the installation media, and then see the article mentioned below to create installation media.

  Download Windows 7 Disk Images (ISO files)

  Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

  Kind regards

• Need help to roll back that Lync Server 2013 changes

  Hi people,

  I need assistance with my environment, it is mainly the Lync 2010, but we were in the process at the beginning of the migration to Lync 2013 when we saw that Skype for business 2015 became available. In order to upgrade to * 2015 I can't have 2010 and 2013 coexist, and the easiest way is for me to roll back changes that introduced Lync 2013 environment.

  Lync 2013 environment consists of a Standard edition server server the FE with a pool of mediation and an Office Web Apps Server. The CMS is always the Lync 2010 FE server. Any help is appreciated!

  This issue is beyond the scope of this site which is for the consumer to related issues.
  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Need help migrating desktop VMs to ESXi 5

  Recently, I have set up my ESXi server but am having a hard time, all my images (VMware Fusion) Office move to my new server.

  I tried two approaches: VMware Converter and OVF models with success mixed in both.

  For VMWare Converter, almost half of the virtual machines I try to convert gives me this error when I select the source image and click Next: "unable to get material for the selected machine information.

  I was not able to find a common point between those who work and those who are not. Some are Linux, some are Windows 7, Server 2008, etc.

  For those who does not work with converter I tried to convert to the FVO, however, I see mixed results there too. Some work, but others when I click on deploy OVF in VSphere process completes very quickly and I noticed that the vmdk is created in my data store but 0 bytes. So, when I try to start the virtual computer fails because it cannot find an operating system.

  Someone has a better approach or may help to explain why I see this issue? VMWare Converter seems to be the way to go, I can't go beyond this error on some of my machines!

  To run the VMs Fusion in ESXi, you don't have a converter, and you don't need FVO-export.

  The vmx file is already compatible ESXi.
  The vmdk can be made compatible with ESXi
  -vmware-vdiskmanager (if you do it on the merger)
  -vmkfstools (if you do on ESXi)

  So, basically, you just download vmx and vmdk with SCP, Datastorebrowser, or whatever you prefer.