Similar Questions

• Problema importazione macchina fisica in esxi 4.0

  ROM importare una macchina semplice winxp pro, not this particolari sono cose sopra, unico dettaglio, hdd 500 GB, suddiviso in 2 partizioni mentre 250 e di, of da he datastore Dove andra a finire macchina in versione virtualizzata, e di 160 GB.

  Premesso che mean dei dati e di solo 10 GB, ho used "a caldo" con utility 4.1, Jessica doing prove di ridimensionamento della partition (100 GB, 50 GB, it minimo che viene here), importazione con takes success, my quando vado ad avviare macchina virtuale posso vedere nella console solo una schermata nera con a cursore in alto a sinistra e di fatto if no starts.

  Wrong qualcosa? ForSE it problema e nel resize del disco?

  Grazie by any help...

  Usually not e it resize it problema, sicuro che hai no impostato magari a cambio di controller disco? Con versioni ESXi 4.x you can e successive utilizzare an IDE controller, in modo che sia Republic nativamente da Windows XP.

  Inoltre, installi I have vmware tools alla fine della di server procedure?

  Prova a usare he converter 5.0 standalone.

  Ciao,.

  Luca.

• Help! -Mudar size back discos ESXi

  Amigos, estou com problemas by fazer o redimensionamento don't discos no VM, criei em silt, I tried usar o vCenter pra converter ela desligada mas com o menor disco sem sucesso, ocorre o erro quando tento ligar ela flat: the attempted operation cannot be performed in the current state (engine off)

  Alguem Puder is me help Obrigado.

  Bivvy o seguinte:

  1º - disco VM sem Crie uma nova;

  2º - edited as configuracoes desta e VM adicione um disco, o land VMDK do da sua VM turned;

  3º - ligar tent a new virtual machine.

  APB bem o than quiz say com voce NAO... ' to all option resizing disco creio that best mas ele não seria para me da an option.» VM esta o no ESXI 4 convertendo pra dentro do dele. »

  SE você estiver is referindo ao Vmware Converter, ele possui uma option sim ' resize ' disco, allowing one reducao seu size.

  Att.

  Brahell

• Problem with "Extended desktop", integrated display is disabled

  Hi all

  I have a MacBook Pro 13 inch early 2011 with OSX El Capitan 10.11.4.

  Just before I upgraded to 10.11.4, I use to work with "extended desktop" using the built-in screen and the external monitor. Since the update, whenever I connect the external display it goes automatically to the external screen and completely disables the built-in screen. Sometimes removing the HDMI cable (with mini port adapter), putting the MacBook to sleep, log in again and the Mac, the awakening back on two screens, but most of the time he spends just go back to the external display only. This gets really annoying.

  When you use the external monitor display poster preferences only options of this monitor and my arrangement tab is missing (like the built-in display is temporarily disabled). By clicking on "Detect displays" (after pressing option to show) doesn't change anything. Using the brightness to toggle keys mirroring does not work either.

  Is - it there anyway that I can configure so worth by default "Extended desktop" with built-in monitor on and external display?

  Any help will be appreciated.

  Thank you

  Hi there Ajgalvezm,

  It seems that your computer does not work with your monitor external because you upgrade 10.11.4. I would use these steps in the following article to help you solve problems that:

  Get help with graphical problems on external displays connected to your Mac.

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Thank you for using communities of Apple Support.

• Problema conexao ao 5.1 ESXI host using IP address

  Good afternoon!

  Enfrentei ler um problema ao try connect ao console ESXI. Beauté na tela dinna host ESXI as o mesmo não distãncia IP.

  "Then fled ao"configuration management network " para configurar o IP, para a minha surpresa access estava indisponivel o para o meu usuario root, nao conseguia joints o IP.

  Then sobrou a configurar por linha comando option. After some tempo, um colega para resolver o problema precisou realocar o meu para VMKernel interface devida. Problema esta IA, fazer isso, houve o why?

  Then para voces entenderem better, o cenario e este aqui:

  1. Servidor com interface to enable gerencia IBM;
  2. A team of suporte e love por joints o IP without Configuration Management Network;
  3. Apparently a suporte o IP joints esqueceu team - but why nao era possible joints o IP da forma normal, pelo esxi host?
  4. A team of only, the faz joints nome o suporte e ip e demais configuracoes using o do ESXI console.
  5. List of Ao as interfaces, one ""Management Network; " " era presented, however, neste host ping ao address 127.0.0.1 localhost o mesmo não estava running.

  Then pessoal, estou Querenda hear what it happened neste don't host ESXI, afim sanar registaram problemas no futuro.

  Desde ja Agradea§o!

  Fabio,

  UM problema e possible a members interface (VMKernel port) ter sido removed do group members ports, through e of da comando voce poderia verificar linha an existencia da mesma utilizando o comando esxcli list of network ip interface.

  Uma vez não exista essa interface, possivelmente voce nao let configurar o IP do through configure networking, ja nao existía uma porta para ser configurada.

• Problem DELL MEM pack on ESXi 4.1 installation

  Hello

  I'm having a problem with one of the host ESXi 4.1 when I try and install the pack MEM DELL EqualLogic.

  Error:

  Installation of packages: cross_oe... # [100%]

  Encountered error VisorSetupError:

  The error data are:

  Message - could not clean up staging of dir/tmp/stage: [Errno 20] not a directory: "/ tmp/stage/oemstage/usr/lib/ext/dell/srvadmin/var/lib/openmanage/log".

  Errno - 17

  Description - there was one creating destination ESXi installation error

  The command, I am short of connection Putty is below:

  esxupdate - bundle == dell-eql-mem-esx4 update - 1.1.2.292203.zip

  It works fine on the other five guests.

  I checked free space on the disk, and there is plenty of space.

  / Suggests ideas please?

  Thanks for your help Julien but for lack of time, I just took a host profile and rebuilt the hosts.

  Kind regards

• NFS problem after upgrade to vSphere, ESXi 5.0 5.1

  Hello community,
  I installed / updated on a Dell r.620 Server ESXi 5.0 5.1 vSphere
  I also have an ESXi installed 5.0 an another r.620 Dell both connected to a Snyology Racksation via NFS. (at different volumes)
  Now, I have the problem that I can't install an OS (Windows XP, Windows 8, Windows 7) located on an NFS share in a new created virtual machine.
  I am not connected without vCenter, just with the vSphere Client direct connected.
  The system boots, but I can not choose to install the operating system on the new created VMDK but then nothing happens.
  I also tried to format the drive before installation, formatting breaks down after 15 minutes with the message: "unable to format the drive...". 0 x 80070057 ".
  When the virtual machine is on the local storage of the VM to the server, everything works fine.
  I can also install and start virtual machines on the same NFS with an ESXi 5.0 share.
  Formerly installed VMs can also start. All hung on the windows logo screen and the German Embassy "Comuptereinstellungen werden übernommen"... for over an hour...
  The same virtual machines work fine on the ESXi 5.0, located on the same NFS share.
  But on the NFS share, I can write and read the data with the Client vSphere (on configuration-> storage) with no problems, so I guess that there is a problem with the NFS, permissions etc volume.
  So I guess there must be a problem with the NFS share on vSphere Host 5.1.

  Does anyone have an idea what is the problem?

  Thank you very much!

  No worries

• Problem with sh scripts on ESXi 5

  I recently had to solve some problems with delays during renumerisations and restarts due to RDM which is attached to a host ESXi 5 discs. See this article for details http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1016106. Since I had a large number of RDM disks and needed to run the commands on each host I thought that I would write a script. I created the following scripts (just a subset here), but are there problems when it runs:

  Perennial.sh

  esxcli storage device base setconfig d naa.60000970000292600424533033434642 - perpetually reserved = true
  esxcli storage device base setconfig d naa.60000970000292600424533033434643 - perpetually reserved = true
  esxcli storage device base setconfig d naa.60000970000292600424533033443041 - perpetually reserved = true
  esxcli storage device base setconfig d naa.60000970000292600424533033443133 - perpetually reserved = true

  and

  perennial_verify.sh

  esxcli storage device base list d naa.60000970000292600424533033434642 > > storage_list.txt
  esxcli storage device base list d naa.60000970000292600424533033434643 > > storage_list.txt
  esxcli storage device base list d naa.60000970000292600424533033443041 > > storage_list.txt
  esxcli storage device base list d naa.60000970000292600424533033443133 > > storage_list.txt

  I put the files on a data store and gave them execute permissions and they seem to work, however when I run the scripts, they give an error at the end of running something on command not found or something. It does not run all the commands as well. Finally, when the perennial_verify.sh is run more than once something happens in the file storage_list.txt - he had me puzzed for awhile - he showed that the file was different from zero in size, but when I did a cat or less that he would say that the file is not found. Finally I tried to copy the file down in the browser of data store and found that there was a printable character appended to the end - possibly a return carraiage. Now I can not rename the file or delete it - it is impossible to remove. If anyone has any advice on running sh scripts and the correct way to pipe the output to a file I know you more.

  Thank you

  Ed

  What is the exact error do you receive when you try to delete?

  Rather than redirect the output for each order, simply redirect the script in the log file, which will capture the entire script.

  ./perennial_verify.sh > storage_list.txt

• VIB problem custom in 4.1u1 ESXi 5 upgrade

  Hello

  In a HP ML350 G6, I started the upgrade and was confronted with an error message regarding the 3rd third-party drivers that will be removed and could adversely affect system

  stability if deleted wrongly.

  The drivers are:

  OEM-VMware-ESX-Drives-net-vxge

  OEM-VMware-ESX-Drives-SCSI-3W-9xxx

  I used iso that I download from HP.

  How can I solve this problem and update without problems?

  Thanks in advance

  These two drivers have been installed with ESXi 4.1 Update 1. Unless you have a special Setup to your guests and you use these drivers, must register to continue installation by forcing the upgrade.

  André

• Problem adding a data store ESXi 4.1

  Here is my configuration:

  Two hard drives in RAID 1 for ESXi (250GB)

  Four hard drives in RAID 5 for VMS (2.73 TB)

  I read that you can have a store more than 2 TB of data. What I want to do is keep the existing 5 RAID, create two LUNS and add them as two warehouses of data separate (I guess that's the best way to work around the limitation of size). It does not really matter to me whether two LUNS of equal size or if one 2 TB and the other is 730 GB, just what is easier, I guess. My problem is that I don't know how to create LUNS. I looked into the utility Configuration RAID Adaptec BIOS, but I can't do anything other than the basis of creation and deletion of tables. Can anyone lead me in the right direction? Thank you.

  You will need to go through the documentation for the RAID controller. Many but not all will allow you to enter a virtual LUN table or terminology of the disks vary according to the manufacturer. If you do not have this option, you must create two RAID 1 volumes.

• Problem the appliance USB VMware ESXi 4.0.0-4.1.0

  Dear Sir

  I have a problem for my server to recognize USB devices.
  VMware ESXi is installed 4.0.0 and 4.1.0 and in both cases, these devices don't notrecognize me.
  The machines that I tested on Windows Server 2003, 2008 and even Linux and there nocase.

  Any solution or idea?

  Best regards

  Sebastian

  I had the same problem. You will also notice that there is no power to the USB

  Look at these two links:

  http://www.VM-help.com/esx40i/VMDirectPath/fix_config_issues.php

  http://www.VM-help.com/esx40i/VMDirectPath/USB_Setup.php

  NB NB NB: the host chipset must support the passthrough option

  After you have added all of my usb devices and after a reboot, my local host console was frozen and I could not access anything whatsoever. I did a repair and everything went quickly up and running and will now add each device for passthrough successively. (you will need to reboot the host after addind devices)

  Help file for above problem:

  http://www.VM-help.com/forum/viewtopic.php?f=22&t=2603

• Mysterious problem - HP DL380 G7 Server - ESXi installs but won't start

  Someone has already seen this? I have a new DL380 G7 server, I have 8 drives and installation with 2 bays, RAID10 (4 discs). ESXi 4 DVD comes from an ISO, I downloaded from HP (and have used on other servers as DL380 G6 without problem). The installation goes by at the end asks me to restart, and then I remove the DVD and restart. The controller, SmartArray P410 is defined as the boot device (there is one in the system) and I even try the F11 at startup and tell it to boot from HD... the screen is blank for a second then the server tries the other boot devices (network, etc.).

  I am really puzzled. During installation, the installer sees the two logical drives very well. I took LogicalDrive0 to install to.

  Thoughts? I'm puzzled.

  I agree with the suggestion of J1mbo . It is a good way to make sure that you install the operating system/ESXi on the expected logical volume.

  Another possible way to make sure that you install on the logical volume is created volumes with slightly different sizes. (I usually create one with only 10 GB for ESXi). In this way, you will be able to take the logic unit number in the Setup program based on its size.

  André

• Problems with the RAID on ESXi 4

  Hello

  Although I have been using VMware Server for a few years, I am beginner with ESXi and would like some advice please.

  I'm putting a laboratory machine using the following environment:

  Dell PowerEdge SC1425

  3 GB RAM

  disks SCSI 2 x 73 GB attached to an Adaptec 39320 b. RAID controller with integrated HOSTRAID support.

  I worked on how to configure oem.tgz to recognize the RAID controller and have successfully upgraded to ESXi 4.1.0.

  Where I struggle is as follows:

  I wanted to install ESXi on two SCSI drives, configured as RAID1 mirror.

  I started by setting up a RAID1 with the Adaptec BIOS table. The problem is that when I installed ESXi, it would not fully start, claiming that I have two drives with the same UUID.

  So, I did it again, reset the controller (i.e. no RAID). This time, ESXi installed and running successfully, but as I suspected it would be started from a single disc and shows the other drive as a data store.

  Is there something I'm missing here? Should I persevere with RAID1 with the Adaptec BIOS configuration, or is there something in ESXi I should use?

  It does not appear on the HCL, and I expect that the card is also well supported and a RAID device. The fact that the card does not appear in the simple.map may indicate that it is an OEM version. Adaptec card BIOS can be flashed so I would check that. There are versions of pilot listed as entries of subtext of the HCL. See if there is any meaning with those.

• Problems of conversion VMachine in ESXi 3.5

  Hi, I am running ESXi 3.5 and Converter Standalone Client and have not had any problems of photocopiers up until recently. While executing an operation of machine to convert (trying to replicate an OpenBSD system) converter Client just hangs and the following error message appears in ESXi events every few seconds until the converter fails, the operation

  Failure of the permission to connect the user [email protected]:No

  It's strange, because it has worked well for me in the past weeks and now throw errors. I have not changed any user that is the root user settings. Any direction would be much appreciated I love cloning just the machine as their construction more fill a few R & D.

  Mick

  Now is it possible to add it to the inventory?

  Browse the data store, go to the folder of the virtual machine, click with the right button on the vmx file, add to the inventory.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Problem with extending a View object in OAF R12

  Dear all,
  
  I expanded 3 seeded VO in (oracle.apps.ota.learner.server) with the following steps:
  
  1 copied the myprojects folder oracle.apps.ota.learner.server folder
  2. create a new workspace and project OA with default package xxarms.oracle.apps.ota.learner.server
  3. has created 3 new VO with extended the standard vo by adding a new attribute * "Course_Flag" *: -.
  
  a. xxOfferingSrchVOExt of OfferingSrchVO
  b. xxOfferingSrchResultVOExt of OfferingSrchResultVO
  c. xxOfferingDetailsVOExt of OfferingDetailsVO
  
  4. has created 3 replacements within the same project Extend.jpx
  5 DBA has imported the Extend.jpx
  6 copied the xxarms.oracle.apps.ota.learner.server of myclasses folder to the java\classes\xxarms\oracle\apps\ota\learner\server folder
  7. customize the page to add the new attribute * "CourseFlag" * with the names of the standard VO
  
  I get the following error when trying to access the page: -.
  oracle.apps.fnd.framework.OAException: oracle.jbo.NoDefException: Houston-25058: OfferingSrchResultVO definition of the attribute type is not found in OfferingSrchResultVO
  
  Please advise if I missed a step that caused the error / advise that if there is no step I can fix to resolve the problem.
  
  Thanks in advance to anyone who tried to help :)
  
  Kind regards... Julie

  Hi Ashraf,.
  The steps are very good.
  The page that you want to have the additional column is having the VO,
  Initially, you added this attribute only for VO?
  If Yes, what was the reason you extended the other VO?

  Thank you

  With respect,
  Kali.
  OSSi.