[HELP] name of the symbol of EEG during execution of [version 20141]
Hello world
I would like to get the symbol 'current' name during execution.
in the previous version, I get this information using the sym 'sym.getSymbolTypeName ()' function, but it doesn't seem to work on the new animated version of edge.
Thanks for the help!
Use sym.name as a workaround.
This has been classified as a bug and will be available in the next version.
Thanks for reporting this.
HTH,
Vivekuma
Tags: Edge Animate
Similar Questions
-
BlackBerry smartphones can not SEE THE SYMBOL of THUNDER DURING the LOADING
I can't see the symbol of Thunder when I load my BB 8520 C. It happened just after I upgraded my software. Please help! It is difficult for me to know if it is already fully charged. How can I report the symbol? Thank you very much!!!
If you have a theme that he won't show
-
BlackBerry Smartphones Can help someone identify the symbol icon on 8520
The symbol will appear along the top of the screen, usually to the left of the provider network and the time. It is a red circle with a diagonal red line at the top left to the bottom right. As a sign "do NOT". Below the Red are three vertical lines, according to me, yellow, red, green, but it is too small for me to see things clearly.
Anyone knows what the symbol and how to remove or address, that it alerts me?
I can see all the other symbols in messages, requests or elsewhere on the phone.
Hello
You can install any application from BlackBerry world as ZonaSnap or ScreenMuncher who are able to take a screenshot of our BlackBerry. Refer to this Article How do I post a screenshot of your BlackBerry .
If you post on our forums then another user may also give some suggestions.
-
Fill the programmatic view object during execution
Hi all
I have a requirement to switch between the three different data source during execution in a single page. The user interface and the field names are the same for these three cases, but data from various sources (queries).
So, imagine that we have 3 objects in view which has implemented read-only (object request depending on the view) and we want to fill a display object at the main performance as a data source for my page.
My idea is to use "Prgorammatic view object" for this data source and then fill dynamically the contents of one of the three objects view read-only based on a setting in the user's selection.
First of all, I want to know if it is thin approach and if yes, then get some points on the implementation or any other sample.
I found this example:
http://techiecook.WordPress.com/2011/05/17/programmatically-populate-view-objects-in-Oracle-ADF/
Thanks in advance,
Nasser
Hello
It is more a case of use for Adaptive connections. See:https://blogs.oracle.com/groundside/entry/towards_ultra_reusability_for_adf
You can use EL to change the name of the ViewObject that an iterator in ADF queries its data. If the switch is on the link layer and there is no need for programmatic view objects. Unlike in the article of the blog above, VO 3 exist in your case then you don't need to create on the fly. Just change the name of VO in the managed bean referenced
Frank
-
I tried to backup using a DVD, as usual, but without success. Back to the high status and Configuration States:
Upward did not complete successfully
Original title: back to the top has not completely filled.An error has occurred. The following information can help you resolve the error:)
The drive cannot find the sector requested:
0x8007001B)I've looked everywhere for this problem... need help :)
Babette
Hello
1. have you done any software or hardware changes on your computer before this problem?2. have you checked with another DVD drive?3. using the Windows backup feature to backup?4 do you have third-party backup programs installed on your computer?To work on the issue, refer to these methods.Method 1:Step 1:If it's a DVD I suggest trying to backup to an external hard drive and check to see if you get any errors.
Step 2:Temporarily disable the antivirus software and check if you are able to perform the backup.
Caution:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Back up and restore: frequently asked questions
Set up or change automatic backup settingsChange when you save your files
http://Windows.Microsoft.com/en-us/Windows-Vista/change-where-you-back-up-your-filesMethod 2:I suggest you check for errors of hard disk on the drive you want to back up.Check your hard drive to find errors in Windows 7
http://support.Microsoft.com/kb/2641432NOTE: the steps also apply to Windows VistaCHKDSK warning:
Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.Hope the information is useful. -
the name of the unknown parameter 'diagnostic_dest' during the upgrade to 11 g R1
Hello
the upgrade with the wizard of 10.2.0.4 on Win 2003 to 11 g R1 UPDATE and I got the following:
Any idea?ORA-01034: ORACLE not available ID de processus : 0 LRM-00101: unknown parameter name 'diagnostic_dest' ORA-01078: failure in processing system parameters
Thanks before.Does the init.ora (for 10g House) used at the start, this database contain this setting? This parameter is only valid in 11g.
-
Flashing of the icons/texts/windows during execution AE4
Hi all.
I have a weird problem. When I open After Effects CS4, icons, other programs and After Effects of course starts to blink, lag and so so. When After Effects is not running, everything works fine. At first, I thought that it is an OS problem, so after about 2 months I bought new HARD drive and formatted, installed Windows XP SP3, installed After Effects CS4, but problem has not disappeared.Video: http://www.youtube.com/watch?v=mS6749ID0Zc
* These warnings are wrong installed cycore HD.
I asked on the forums hardware in my country, they said that it is a GPU problem and my video card is going to die in a month, but I'm still living with this problem for three months. However, I think that it is not GPU problem, because this problem seems to be that in After Effects. And if it's GPU problem, is it possible to fix it? I also tried to install the evaluation version.
* Sorry for my bad English.
Then maybe he uses a path or command set when running AE he uses not otherwise... Impossible to say. There is certainly a problem somewhere and that you run on an operating system inherited as WinXP certainly adds an extra level of complication regarding how the driver behaves... Sorry I can't be more helpful, but it's really something where you would have to open the computer and watch things whiel running AE plus of course prior check of cables and al lthat and check the driver. I suggest you a grab your next computer geek best (at school?) and did a quick glance.
Mylenium
-
Reloading of the servers in Tuxedo during execution without stop the instance of Tuxedo.
Hello
Is there any command to say Tux to reload a server a runtime? Is it possible to hot deploy a server?
I understand that it is impossible to recharge the tuxconfig when running, but it is possible to replace an existing server that is already running?
Thank you
brunno Attorre
Hi Brunno,
Usually the best way to handle this is to have several copies of a server running, replace the binary image to disk and the tmshutdown/tmboot sequence of each server. This ensures that only services will always be available, and when servers restart they will pick up the new executable image.
You don't need to reload TUXCONFIG to implement configuration changes. You can use the tmconfig command, even if this isn't the friendliest tool in the shed. TSAM + 12 ° c provides a plug-in control of Cloud for Oracle Enterprise Manager that provides comprehensive management functions for Tuxedo, including making virtually any configuration change on the fly. You can also make direct requests of MIB yourself with a customer FML32 or ud32 to modify the dynamic configuration. Do not forget that these dynamic changes will be reflected in the TUXCONFIG, but NOT in the source UBBCONFIG file. If you usually perform a tmunloadcf after making significant changes in Dynamics.
So adding new servers, changing the Server binary, new groups of servers, add a new machine to a cluster, etc., can all make dynamically.
Kind regards
Todd little
Chief Architect of Oracle Tuxedo
-
Attatching the behaviors of library during execution?
Well, I have a chart on the screen (not on the note, but this is a child object that takes a string of sprite when it was created), but I want it to appear by using the behavior of "Rasterization" of the library. I want to know if by asigning a scriptInstanceList of sprite or scriptList (and perhaps then running a custom on the event handler runPropertyDialog that I have to create the cause it is not present in the original "pixelation" behavior, although I guess that's not much to do a duplicate of the behavior) it might be possible to effectively apply this interesting effect. The other alternative, I think East to copy parts of the behavior that I want in my scripts and adapt as needed.
That's how I did for work, finally I think it is necessary to add to the scriptInstanceList of the same sprite or other (in my testings) will not work. Thanks again! property values can be changed in the new Manager, but taking into account the limits established by the designers of these settings (check on getPropertyDescriptionList for this).
-Code from outside the call:
- JUST AFTER THE CREATION OF THE INSTANCE OF THE GRAPH:
_pixelate = new (script "customPixelate", theGraphicSpNum)
Add (sprite (theGraphicSpNum) .scriptInstanceList, _pixelate)
_movie. Call (#beginSprite, _pixelate)
- Inside of a version customized to Pixelize:
property spriteNum
property appearWhen, pixelateDuration, horizontalPixels, verticalPixels, minimumDimthe new me, aSpNum - for implementation through lingo
spriteNum = aSpNum
appearWhen = "start of the sprite.
pixelateDuration = 50
horizontalPixels = 3
verticalPixels = 3
minimumDim = 4
return to me
new end
Just for your reference, the original behavior is under window/Library palette , then animation/sprite transitions/pixelation
-
Received the Oracle error form during execution of patch 9239090
I got below error
What should I do or not?The following Oracle Forms objects did not generate successfully: au resource OKEKAULN.pll au resource OKEDTSFM.pll au resource OKEKAUWB.pll au resource OKLCSHDR.pll au resource OKLCSTRQ.pll au resource OKSAUCVT.pll au resource OKSAUDET.pll au resource OKSSRVAV.pll au resource OKSPMSCH.pll au resource CSCUTILS.pll au resource OKCEXPOR.pll au resource OKCKSRCH.pll au resource OKSAUBLG.pll An error occurred while generating Oracle Forms library files. Continue as if it were successful [No] :
Thank you
Katiain Readme file his statement that 9239090 should be already there.
so donot know 'demand have these pll files compiled.is there a way to know that.
You can go ahead and apply these hotfixes, then the problem of pll files.
Thank you
Hussein -
Hide the test button USE during execution
-
Name of the application server on window
Hello
Is it possible to get the name of the application server somehow during the execution of a form (Forms 10 g 2). We want to show in a matter of window.
Is see no possibilities get_application_property or webutil functions that can do the job.
Best regards Erik
Published by: Erik Trip - Darwin THERE on November 25, 2009 08:29There are several ways in which it can be done. However, the exact way depend on the platform and the method you prefer. Here are a few options:
OPTION 1:_
Create a variable in default.env which contains the host name. For example:Host name = myMachine
In your form, you can retrieve this value by using the following:
TOOL_ENV. GetVar ("HOSTNAME", unevariable);
OPTION 2:_
Get the information from view V_$ SESSION. Needed to use this method, users CHOOSE to view or you can create your own. For example, something like this:Declare the_host varchar2(255); this_user varchar2(255); Begin this_user := GET_APPLICATION_PROPERTY(USERNAME); select distinct machine into the_host from v$session where username = this_user and program LIKE 'frmweb%'; MESSAGE (the_host); End;
OPTION 3:_
Import the necessary java into your application and call it to retrieve the host name. There are many examples of java code on the Internet.http://www.Google.com/search?q=Java+get+hostname
Be sure to compile the code using the version of java used in the version of the application server that you are using. Here are the versions of java:
10.1.2 application server: use JDK 1.4.2
Server applications (FMw) 11.1.1: use JDK 1.6.0If you try to compile the java with a newer version than the version used by the Oracle Home, your code may not work correctly or may not import correctly into the form.
There are probably many other ways to accomplish what you want. I hope this helps :)
Michael Ferrante
Senior Principal Support Engineer
Global Technical Manager of forms
Oracle USA -
Edit/delete/add scene coordinates in the table during execution
Hello world
I managed to build table allows you to store and record the coordinates of the stage and remind to control steps. However, I need change/remove/add details of scene during execution. I also need to allow the user to directly edit the coordinate from the scene of the array. Wondering what someone knows what is the best way to do it? Or is it better to use the matrix or Cluster? Thanks in advance.
Best regards
Han Yen
Han Yen wrote:
Thanks much altenbach for all the advice. I tried to do a table 2D control. I've been playing with table in the control. However, I still can't find out how can I detect that I change the data in the table 2D with the more recent issue during execution? How can I then update my current table with the latest data?
Well, the 2D table is updated immediately and you do not all the other tables.
Do you mean that you want to update XAbs, etc. where the just changed line is already selected?
In any case, here's a simple project, perhaps it will give you some ideas. I would recommend using also the tables for XYZPos, entrances etc. and the XYZabs. This simplifies the code because you reduce the number of terminals and table operations.
Let me know if something is not clear to you.
-
Grant access to the URI at the time of installation or execution
Hello world
I don't know if this is possible, but basically I want to grant access to a URI (URI Web service when executing).
So, let said customers running our ERP system on the premise, our ERP system comes with the generic web services to access the data of the ERP.
We want to develop a playbook application that will ask the URI of the Web Service the first time, launch the application. Now, by my understanding, without adding this URI to the access list, the app will not have permission to call any service using the XMLhttpRequest object, right?
So, how can I add this in the file config.xml during execution? Or y at - it another way to do this?
Thanks for your help.
Phuong
Hello Phuong,
If all you want to do is to access data from an outside domain and does not allow API access to this area there is an easy trick.
This gives access to any field. What it won't let you do, is add WebWorks APIs in this area. If you need to provide APIs for a domain, you must explicitly set in the config.xml file at
-
What would cause a constant changes during execution typedef enum
Hello
In my program I had a problem with a constant of enum for a selection of the tab value change during execution. The enum is as part of the initialization of the program and when I step through the loop and then you see the property node of the climax to the value tab and in the next step of the enum changes its value. I'm under LV 8.0
Any information will be greatly appreciated.
Gary
Maybe you are looking for
-
ROXIO VHS to DVD. Video recording 2 h 05 Min 7,76 GB and saved to the file. ToVerbatim recorded 8 x DVD + R DL 8.5 GB 240mins. He played only for about an hour before he cut. Being a surfer of money and enough new to computers I'd appreciate any help
-
try to download steam for the call of duty black ops, telling me I need to connect to the internet when I am already connected! so frustrated, but do not want to spend any money to get someone to fix it.
-
Internet I'm trying to set up a second computer on my wireless connection. How to get my security code?
-
Two years ago, I bought a Sansa M240. At the time, it wasn't so bad. Now, it is pretty much trash. I've been condsidering get a Zune, but the "rocket" is on sale for $50 today. It was sold out literally everywhere, but it wasn't onsale at Walmart, so
-
Whenever I click the Update icon, I get the message "Application updates are now available" and a place to click on 'Show updates' - I do and see a list of my Applications, but there is no bar saying install - just a list of my apps - what is up with