Help on Factory Reset

Similar Questions

• Envy of HP Touchsmart m7-J120Dx: help please - Factory Reset failed on HP Envy

  Recently, my touch screen laptop was suffering from extreme "ghost key" that made the laptop basically unusable until what I disabled the human and used only the mouse interface. I went on a popular site that has accompanied me through many scans detailed and determined that it was not a virus/malware issue.

  So, I tried a system restore and that didn't help. Next step was a factory reset picture using the recovery disks that I made at the time of purchase. After 3 attempts, resetting continues to fail. He always looks promising and gets to the 'Welcome to the administrator' screen but then returned to "installing the software" finds himself finally on-screen "restoration incomplete". When I try to record the details of newspaper on a DVD it says that there is not enough free space even if it's a blank 4.7 GB disc. I took a photo of the paper (attached) if that helps.

  On a side note, in the "software installation" process the blinked eye at random and this frame which seemed to be menus drop down open randomly for fractions of seconds in the background... which none appeared kosher to me - but I'm not expert tech. "."

  I have an extended warranty and may end up having to send it, but prefer to fix here if possible. I love this laptop and am at a complete loss here - thanks for any help/advice!

  

  Hi @Krooz ,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and tried to help you.
  
  Please use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  
  Step 1. Open the link: www.hp.com/contacthp/
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately. Thank you.

• I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card. Can someone help me please?

  I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card to make. Is there a way I can install and use my iPhone without needing to be activated? Can someone help me please?

  To skip the activation of sim card, you can use iTunes if you have a CDMA iPhone. However, if you have a GSM model you will need to insert a sim card to activate your iPhone (it can even be used/inactive). Here is an article that will help you determine if your iPhone is GSM or CDMA: http://osxdaily.com/2012/11/15/determine-iphone-gsm-or-cdma/

• Ask for help on the execution of a Factory reset on a Dell Inspiron 530 running windows Vista Home

  Hello I am a request for help and advice on preforming a factory reset on a Dell Inspiron 530 running windows Vista Home. I've never done this before and I am new on this. I appreciate any help I can get. Thank you.

  Thank you, Robin

• I recently did a factory reset on my computer and saved all my files on a flash drive when I load them onto my computer, they look all as internet files explore instead of dreamweaver files, please, help?

  I recently did a factory reset on my computer and saved all my files on a flash drive when I load them onto my computer, they look all as internet files explore instead of dreamweaver files, please, help?

  They probably had the IE icon because Windows automatically associate with IE html files.

  It is of no consequence for your work in Dreamweaver, but you can change this association if you wish.

  Go to control panel > default of programs > set Associations.

• I had to do a factory reset on my W7 64 bit PC and reload my software. Now I can't access the CR2 files. Help!

  I had to do a factory reset on my W7 64 bit PC and reload my software. Now I can't access the CR2 files. Help!

  These are the files that I have consulted before the reset and come from my Canon 550 d.

  Do I need another plugin?

  I think the key is that the updates failed.

  I suggest try to update manually via the packets 'Camera Raw 6.7 Update' and 'Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5' found here: Adobe - Photoshop: for Windows

  -Christmas

• PALM TX - Factory Reset question - need help

  I have a PALM TX. The green power button on top seems the PALM TX turns on but not turn off the power. The home on the PALM TX button will literally reset the PALM TX by it turn off and save as a PC. The soft reset by clicking on the reset at the back button works. The hard reset never works it just of upward loads data and time to change initially. I tried a reset which apparently does not apply to the PALM TX zero. I'm doing gift of this device, but I want to make sure that all my information is a first. I think I'll just keep it if I can't find a way to do a factory reset.

  When all else failed, I tried to remove only randomly all the softare or memory on the primary server, but at some point it resets and it won't let me do this etiher. A knowledge of any software I can add to make a factory reset?

  Tara

  Is this your first Palm?  It sounds like from an older older device file system have been sent to this TX.

  A Hard Reset is recommended.  If your power switch is in effect unusable, I have another solution.

  To perform a hard reset: (Palm Knowledgebase article #887)
  
  By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.
  
  You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

  If you are unable to do the above, download and install the "Hard Reset" here:

  http://www.palmpowerups.com/downloads.php?cat_id=2

  The program will run immediately reset when it runs.

  WyreNut

• Help me my Inspiron 5520 core i5 factory reset

  I have a blue screen error of death (no mountable bootvolume) I can't login on any mode screens in nothing works just reboots so I tried to reset everything as a last attempt, but I don't have the cd. So I bought a cd - r and what he was going to put what I had there and the computer would read what he has implemented. Can someone link me to whst I need or tell me it will work yet?

  Hi Oppositeofhood,

  Unmountable boot volume might be a few things, maybe a bad hard drive. So you do not want to perform a factory reset without diagnose the problem first. And what I would do first is to test your hard drive.

  To test your hard drive using your Dell Drivers and Utilities disc:
  1. reboot your system. When you see the Dell logo, press F12 to open the start menu.
  2 insert the Dell drivers and disk utility in your CD/DVD drive.
  3. choose the option to boot from the CD/DVD drive.
  4. you will be asked to hit any key to continue booting from the CD/DVD drive.
  5. you will be asked to hit 1 to run Dell diagnostics. You can see two of these menus.
  6. Select the test system.
  7. Select Custom Test.
  7. use the arrow keys or the mouse to select your hard drive.
  9. click on running Tests.
  10 write error messages.

• Need help to reinstall the certificate after factory reset

  I have an ASA 5512 x race worm 9.1 AMPS Ver7.1 2 (3), I had to do a factory reset on the device and now when I use the anyconnect vpn wizzard and I'm trying to install the certificate on the device before the reset, I get the ERROR: failed to import PKCS12 operation.

  The old certificate has been generated by this device.

  How can I reinstall the old certificate?

  Thank you

  Scott

  You can, but you still need their intermediate certificate for the SAA can set up a chain of trust from the issued certificate (if it is initially issued or reissued)

• I want my iphone factory reset because I do not know the icloud stuff reactivation

  I want to factory reset my phone because I don't know the password to my icloud to reactivate my device

  Erase content and settings on your iPhone, iPod touch or Apple Watch - Apple Support Settings - general - reset - clear content and settings.

  Hope this helps, good luck to you

  ~ Michael M

• Factory reset wireless router connection problems?

  Hello

  I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

  This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

  I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

  The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

  Any help would be greatly appreciated.

  I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

  I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

• How to factory reset iPad without ITunes?

  Recently, (today), I've updated to latest iOS for my iPad Air. While making a password, I wrote very fast because I have would be turned off. My mother called me for breakfast, so I left it there.

  Just before going to the school, I noticed it turned off and now have to enter a password. I tried until I disabled, and I kept trying and waiting time until what I looked up what to do. I tried to go to recovery mode using iTunes on my laptop (Yes, I plugged my camera), but he continues to have an error. I did it just once and he said she needed a response from my iPad itself.

  So, I would like to know how to factory reset my iPad without iTunes if it is still possible. I saw 10 + forums and websites but none were easy and confuse me a ton.

  Thank you!

  Best regards

  Michiette

  Michiette wrote:

  Recently, (today), I've updated to latest iOS for my iPad Air. While making a password, I wrote very fast because I have would be turned off. My mother called me for breakfast, so I left it there.

  Just before going to the school, I noticed it turned off and now have to enter a password. I tried until I disabled, and I kept trying and waiting time until what I looked up what to do. I tried to go to recovery mode using iTunes on my laptop (Yes, I plugged my camera), but he continues to have an error. I did it just once and he said she needed a response from my iPad itself.

  So, I would like to know how to factory reset my iPad without iTunes if it is still possible. I saw 10 + forums and websites but none were easy and confuse me a ton.

  Thank you!

  Best regards

  Michiette

  If you have forgotten the password for your iPhone, iPad, or iPod touch or your device is disabled - Apple supports no, you can not you must use iTunes.

  you said there is a mistake but did not specify what it was, so you can look here for help with iOS update and restore errors - Apple Support

• My iphone 6 has no service and always looking. WiFi works, sprint is not sure what is wrong with it. no damage ever to the phone. factory reset did not fix the it. Please advise?

  I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?

  isoldier86 wrote:

  I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?

  Get help with hardware features on your iPhone, iPad and iPod touch - Apple Support

• HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

  Hello

  So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

  If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

  I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

  Thanks in advance.

  Hello

  I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

  Kind regards.

• DeskJet 3630: Deskjet 3630 factory reset

  Hello. I configured my Deskjet 3630 successfully then open EWS, disabled some features and set password. Since that time admin password is not accepted. I tried network settings reset (Cancel button + button WiFi) but it does not affect the EWS password. Tried the deactivation/activation and many other methods - nothing works. I need a factory reset and I have no admin password. Help, please.

  Hey @BrahmaHuman,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with a setting of password on printer all-in-one Deskjet 3630. For that matter, I suggest contacting HP Support directly. You can do this by clicking on this link and fill in the form below.

  Please let me know if you are able to clear the password. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.