HELP: resetlogs does not...

Similar Questions

• I get download error messages, could not be opened beak helper app does not exist, chg association suggestions - what to do?

  I get - download error - / Users/ffrasher / / Desktop/Firefps
  3.6.13.dmg could not be opened, because the associated helper app does not exist. Changing the association in your preferences. I run MOSX 1.3.9 Firefox 2.0.0.20. What I can do to upgrade.

  Frank

  See:

  • http://KB.mozillazine.org/The_associated_helper_application_does_not_exist

• HELP & SUPPORT DOES NOT OPEN

  Help & Support does not open. I have the msg "...". a service system does not work. To resolve this problem, start the service named 'help and Support '.

  I can NOT open help and support in order to start the service.
  Can you please help?
  Thank you
  John

  Hello

  ·         Were there recent changes made on the computer before the show?

  To resolve this issue, start the Help and Support Center service and set it to automatic. Follow these steps:

  (a) click Start, run and type Services.msc

  (b) double click on help and Support

  (c) to set the startup type to Automatic

  (d) start the Service

  See also:

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

• my work of collapsed app coil system, help printer does not work

  my work of collapsed app coil system, help printer does not work

  Hello

  1. What is the brand and model of the printer?

  2. do you have an error message when you try to print?

  3. were there any changes (hardware or software) to the computer before the show?

  Perform the steps suggested by chan seen from the link below and see if it helps.

  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  Hope this information helps.

• Manager Agent OATS and OAT Helper Service does not work

  Hi Expert

  IM new in OATS for work in Oracle load test, I installed component OATS (agent), Server components, weblogic Server.

  Installation is almost successful but an error message that I Ingore, but when I want to Activate the service startup work OTS I the following:

  
  

  [root@xxxxtesting]#/sbin/service--statut-all |] grep OATS

  OATS Manager Agent is not running

  OATS Helper Service does not work

  [root@xxxxxtesting]#/sbin/service OracleATSAgent start

  From oats-am: [OK]

  [root@xxxxtesting]#/sbin/service OracleATSHelper start

  From oats-hs: [OK]

  [root@xxxtesting]#/sbin/service--statut-all |] grep OATS

  OATS Manager Agent is not running

  OATS Helper Service does not work

  
  Please help me

  PL don't post duplicates - Problem installing OATS

• In P6 P6 help link does not work

  Hello

  My P6 help link does not work in the Help menu.

  P6 library and Support link work.

  As suggested in another discussion, I tried to update the link in Admin > setting Application and restart weblogic, but system still takes another link that I defined in the application setting.

  Can anyone help?

  Hello

  We have worked on this issue,

  Solution:

  In the application of P6 EPPM Admin in the corresponding configuration in P6 help url, we changed the url from http://hostname:8203/p6help/help to http://hostname:8203/p6help/and we have restarted the P6 server in weblogic console.

  Then all fine now

  Concerning

  Kumar

• Corrupted profile. Help solve does not.

  I had an administrator, set up account. It was worked well for almost 3 years. The other day I got a "there is a problem with your profile. You have been logged on with a temporary profile. "Following the directions of assistance &, set up another profile with administrator rights, and copied all the files, except Ntuser.dat, Ntuser.dat.log, Ntuser.ini as, from the old profile to the new. When you connect with the new profile, the start-up aid does not work and "Manage other accounts" in the Security Section (and probably elsewhere), do not work. Also the permissions are not the same as before. I've set up an another account that has administrator permissions, WITHOUT copying the files to the original user and it works OK - well that does not have the same permissions as the original.

  When activating the administrator account built in and the connection, I get the same 'problem' message and set up in a temporary profile.

  Any guidance/help appreciated!

  Hello

  You have tried some of these methods however please start at the top and work downwards as it sounds
  as you have missed something. A repair facility can help AFTER you worked well
  through these methods (less likely to help if they are not done before you try).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  -----------------------------------------------

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for

  
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  ==================

  If you have tried the above, a thorough way then an InPlace upgrade/repair Installation
  could help. This will keep the programs and data, although redundant backups are
  always a good idea.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HELP-PC DOES NOT START. MODEL S5268hk, SLIMLINE

  Help I don't know what is the cause but my 6 - month, S5268hk will not start / run correctly. I mean, it's - when I press the power button-it feeds for about 2 seconds (fan running), then it turns off and restarts itself and product then two beeps after... and it crashes like that beep. It will be not yet feed the monitor that's why I could not see any error message.

  I tried to disconnect and reconnect, but the same thing happens. Even if only the power cable is plugged in-it does not work.

  Hope someone here can help me. I wasn't expecting such malfunction arrive too early for this brand. It's only six months. I don't know that I managed to shut it down properly last night.

  Thank you!

  Two months old means that your PC is still covered by the warranty. Contact HP support.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• Please help wifi does not not ACER aspire 4710g (wireless network card problem)

  Please help me

  C:\Users\ali>ipconfig/all

  Windows IP configuration

  Name of the host...:-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt #.

  2

  Physical address.... : 00-1F-3A-1B-2D-F5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Network adapter on Broadcom 802.11 g

  Physical address.... : 00-1F-3A-1B-2D-F5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: b 3 fe80::4e8:4: 4d49:acc2% 16 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 318775098

  DHCPv6 DUID customer...: 00-01-00-01-1B-50-87-0D-00-1D-72-1B-B7-7D

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Broadcom NetLink (TM) gigabit Ethernet

  Physical address.... : 00-1D-72-1B-B7-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Adapter Ethernet Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Adapter Anchorfree VPN #2 HSS

  Physical address.... : 00-FF-03-C6-CD-54

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Adapter Ethernet Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card Anchorfree VPN HSS

  Physical address.... : 00-FF-EF-4A-57-34

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  C:\Users\ali >

  AWI

  There is a problem with the wifi adapter "wireless network connection Wireless LAN adapter:" the driver is corrupted or it is incorrectly configured.

  I would start by removing the current driver of sifi and install the latest driver available.

  The IP address for the above connection is

  Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

  This state it does not connect with the router.  Alternatively, you can try to restart the computer and the router at the same time.

• BlackBerry Smartphones Help: Browser does not

  Help!

  I can't use the browser to open the web page.

  When I can have any King of web pages, a below message "this is a wi - fi service. Please ensure that your willing decive of connection wi - fi active and try again"

  in fact, any, I connect with wifi or data services, it does not work. but other applications online are always works.

  Please kindly help me.

  Another question, any suggested good web browser?

  Hello!

  Please follow the mentioned below as follows:

  Go to browser > press Menu > Options > browser Configuration > browser > Internet browser

  Now, to save the settings.

  I hope that solves your problem!

  If your problem has been resolved then would you be asked to click 'Like' and accept as a 'Solution' that other advisors is not invest more of their time on this Message.

  Thank you.

• Need to Smartphones blackBerry help-apps does not connect to the internet, even with UMA

  Yesterday for a strange reason my app fmylife, even my aim and msn messenger does not connect to the internet. The blackberry browser connects either, only opera mini-tout this time I am connected to my wifi at home and I UMA. Calls and texting works fine. I tried several times to switch off the connection and then turn it back on, I restarted the phone, I took out the battery but nada.

  Any suggestion or help is greatly appreciated!

  -Hillary

  Hello!

  Official information is available here:

  • http://blogs.BlackBerry.com/2009/12/new-version-of-BlackBerry-Messenger-available/

  See you soon!

• Adobe CC2014, offline Help file does not

  Hello

  I use Adobe CC 2014 school.

  I followed the link below for the installation offline file: use the help in Adobe products offline

  Basically, I download all PDFs and put it in the right location.

  However, it does not work for me.

  
  

  can someone help please...

  Thaks

  Read Jack

  Please visit https://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Adobe AE CS4 Help Menu does not work

  AE help, Scripting, refers, predefined animations, the keyboard shortcuts are not working in the Help menu. Registration, deactivation etc are functional. This AE's with Production Premium CS4 on Windows Vista. This is a problem since the initial installation. He remained a problem on the relocation of a year and a half later. Is there a file that does not load from the disk I should know about? I expect updates to fix this, but that didn't happen.

  I solved the problem in CS4 by uninstalling and reinstalling AE. Obviously when I installed on drive it installed everything. EI, I was part of a suite (PP) and I reinstalled probably all. CS5 has pdf help popping up when I'm looking for the application window. It is an obstacle. See my problem for December 2011.

• Context-sensitive help works does not in RoboEngine

  I publish WebHelp Pro content to a RoboEngine server on a Windows 2000 Server. Because it is a driver of this technology for us, I use a web server on port 8081, so my help is served from http://sps01:8081 /
  
  It works very well, with research and everything else as a stand-alone web site, but the integration with our application (VIsual Studio .NET application) does not work with context sensitive help.
  
  I created the map ID is. I know this works because when I publish the Microsoft HTML Help (CHM file) and the application works very well.
  
  If I open the help page for the URL I used is:
  
  http://sps01:8081/Robo/bin/Robo.dll?TPC=%2Frobo%2Fprojects%2Fkeystone%2Fgetting_started%2f getting_started.htm%3FRINoLog28301%3DT & mgr = agm & wnd = ___defaultSystemWindow___ & agt = wsm & ctxid =
  
  I expect to be able to get to the context-sensitive help for the 3004 category to
  
  http://sps01:8081/Robo/bin/Robo.dll?TPC=%2Frobo%2Fprojects%2Fkeystone%2Fgetting_started%2f getting_started.htm%3FRINoLog28301%3DT & mgr = agm & wnd = ___defaultSystemWindow___ & agt = wsm & ctxid = 3004
  
  But I don't know if the same page by default.
  
  I tested on a number of HelpID familiar work otherwise, so I'm happy with my card ID.
  
  Looking at the deployment of RoboEngine guide, examples of URLS on page 30 have (RoboHelp Pro only). I am created with RoboHelp X 5, it's my problem, my version not support context-sensitive help in WebHelp Pro?
  
  Any help would be appreciated.
  

  Hi Chet,

  Problem solved. Thanks for the tip on the CSH test tool. I tried to use it and found that it was not launching help at all. It made me study my maps. Looking for card ID 3004 mapping, I found that it * was * a topic mapped (to the Unassign button has been activated), but there is no title in the subject. It seems that there is a broken link on the subject. I have not assigned the mapping, then then reallocated, and the problem was solved.

  In total, he had 5 broken mappings, including all the ones I was testing!

  Thanks again for the pointer. The CSH test tool works pretty well actually.

• Help BMC does not work!

  Hi, I'm new to the fourm, sorry if I'm posting in the wrong section.

  The server that I did a server poweredge 2970. So, today, I was updating the BMC firmware to 2.50. How never restarted the server now, of course does not bmc and the front lcd is a mixture of blue and red. is there a way I could fix this by bmc reflashing? And if yes how can I do this because I have no idea. Thanks to and if you need more information, I will post immediately.

  Too bad I was able to solve it myself. Over just reastarting, started in Windows server 2012R2, retried the firmware and after 8 minutes, it worked!