HELP the MSC won't convert.

Similar Questions

• ITunes won't convert to mp3 since the update

  ITunes won't convert to mp3 more since the last update. Think Ive tried everything and was working fine before. IM on windows.

  D Milano,

  12.4, it can still be done, but it is no longer in the menu contextual (right-click).  Instead, highlight the track and use file > create a new Version.

• My project will not move past slide 7.  I created a new project using a ppt presentation and the porject won't move past slide 7 even in preview.  Help?

  My project will not move past slide 7.  I created a new project using a ppt presentation and the porject won't move past slide 7 even in preview.  Help?

  I was pulling the presentation ppt to a network drive, so he didn't fully assume.  I saved the presentation on my desk and imported again and it worked fine.

• I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play in 7.__it still doesn't react. What should I do? Please answer__

  I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play at 7.
  It still fails. What should I do? Please answer

  Hello

  a. what game do you have installed?
  b. do you get errors trying to run the game in compatibility mode?

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You can try to perform the clean boot on your computer and check if that helps.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  For more information visit: http://support.microsoft.com/kb/331796

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  You can check its compatibility with windows 7 in the Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Hope this information is useful.

• HP 50 g RPL program to list the factors needing help the formatted output; Matrices, vectors, lists, etc.?

  Hello

  I have not always perfer the output of the DIVIS HP 50 g.

  DIVIDED lists all the factors of a number in a way that is ineffiecent and confusing when there are many factors of a given number.

  For example, when you run 1000 DIVIS you are treated to a large "block" of numbers organized vertically in such a way that only 4-5 of the 16 factors of 1000 are still visible to you without additional keys.

  I'm trying to create a program that simply formats the output of DIVIS differently when there are a lot of factors for a given number. I'm a newbie to the USER RPL. I have the factors that come out a while loop in this format. (100, 10) Unfortunately, my time loop depends on these factors enters NOT the battery until AFTER he calculated all the. I need to find a way to store a set of factors by the execution of the loop in a kind of variable, and then remind each other both on the stack at the end of the program execution. If the code is necessary for you to see, I can post it. The problem is that it is unclear how many factors will be present at this stage. It will be the original number / 2 because I have through each pair of factor in jurisdiction parens with R-> C. In addition, the capture method must be in the loop because that if it is not the loop won't work correctly because the method by which he organized the factors in their concerned couples depends on a process of battery undisturbed during the execution of the loop. Leaving the parens at the bottom of the battery causes there are an odd number of factors in the stack, which invalidates my program for various reasons. In addition, it would be useful to include a function that could test whether or not the number of factors of an odd number, because I will need to include separate code for this. I don't know any such function in USER - RPL, but I am a beginner in this area. Thanks for any help!

  Zekelegge

  Ranothil wrote:
  (...)

  For 1000, my dream program would output;

  (...)

  Try this:

  ' DUP DIVIS SWAP ON / SWAP R-> C EVAL.

  or:

  "DIVIS DUP DUP SIZE 2 / 1 SWAP SUB DUP UNROT / R-> REVLIST C EVAL.
  
  

• What is the best way to convert 37 000 photos in iPhoto in Photos

  I have a file with 37 000 photos iPhoto. I wish I only know how to use an Apple S/W photos, that's why I want to convert my new photos have been involved in the Photos!

  What are the best options to convert 37 000 photos in Photos?

  Is there a limitation on the number of photos Photos can hold/grip? It will run in degraded mode?

  Should I have / is it possible to have more than one library? If so, does that mean that I lose a search function, i.e. I should search in each library, if I want to find something...?

  All comments and ideas would be instructive.

  There is an option - migrate the iPhoto photo library - it is good to change first the iPhoto library - see these advice Notes on the migration of an iPhoto for iPhoto to Photos for Mac library

  No limitation on PHotos photos - your disk space is limiting - large libraries do not slow down it (I have a 20 000 library and library one 80 000 photos (not ready to pay for the space to her iCloud))

  You can have several libraries of Photos, but you cannot search through them (PowerPhotos can help with this if you want multiple libraries)

  LN

• Why convert? What is the advantage? Why convert it before you send the data over the network?

  Hello everyone.

  I have a question quite simple and intuitive. Yet Google does not seam to get the answer.

  Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

  Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

  I've been curious about this for a while and have yet to find an answer. Any help is appreciated.

  Thank you
  Taylor S. Amarel

  tsa256 wrote:

  Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

  It really depends on the specific situations.

  For example, some functions explicitly require certain types of data as inputs if they are not polymorphic.

  This means that if you do not convert the data yourself and you will see a red dot forced LabVIEW will do it for you.

  As to why the data was not the correct data type in the first place, it is sometimes inevitable.

  A few examples

  -What happens if you just read a text file as a long string.

  If there is digital data in this file, you need to analyze, and then convert it to a usable type (int, sgl, dbl, etc.)

  -you are given a 3rd part VI, dll, etc. that returns a numeric value as a double, but you need the value to I8.

  You cannot change the output of the function given to you, so what you can do to remedy this situation is cataloged data.

  tsa256 wrote:

  Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

  Somehow, this is my first response, but in a more general sense.

  Many functions down to the level of the OS run in binary.

  If your data are not already in binary, the sending computer must convert it to binary, and then send it, have the receiving computer convert in return.

  Two conversions on each side of the transmission add unnecessary delays.

• I allowedI have exceeded my GB account. They refuse to pay for the excess. How can I delete and forbid them to use my WiFi? Help the pse. John (Turkey).

  I allowed a neighbor to 'Piggy Back', my access to the internet, giving them my password. They took advantage of this facility, and I crossed my

  GB account. They refuse to pay for the excess. How can I delete and forbid them to use my WiFi? Help please. John in Didim, Turkey...

  [Moved from comments]

  Hi John,.

  Unfortunately, it seems that your neighbors have taken advantage of your kindness.
  As well as the suggestion of Sanwin2 to change the wireless password, you must also change the password to your console to access router (usually accessed via the IP address in the address bar of the browser). Just do it if the Access console password was the same as your Wi - Fi connection, or by default. Please note that this is ONLY if you have a router to access the internet.
  You can contact your router manufacturer and ask how you can prevent access. Usually, you can set your router it allows only the connection from certain IP addresses that you specify. In this way the neighbors won't be able to connect at all. It would be almost impossible unless experts pirate networks.
  You can also contact your nearest branch. As they are piggybacking without your permission, she (I assume) may be classified as theft. Although I'm not 100% sure and the laws may be different in your area, you can call the non-emergency number and report your neighbor.
  Of course, have you tried to go above and asking them to stop using your connection?
  -Jet

• Helps the Greece!

  I'll preface this by saying that I'm not a tech guy.

  I just moved to Crete, Greece for my wife's work. In the travel process, we have lost a bag of laptog containing my usb cable for the loading of music, software/firmware cd that came with my Sansa e280 and of course my most old laptop and hard drive with all my music and video from the last three years on this subject. It blows a little bit. All I have is my player and charger now, and I have a few questions.

  -Can I use the usb cable supplied with the charger to plug into the usb on my other laptop to load music? Currently I'm plugged into the wall, and for some reason when I plug it it says that there is too much to be able to go to him, but I guess that after we get a transformer that will cure it.

  -My player is fully loaded with music. Is it possible to copy music out on my other laptop? I am aware that I need to install the software that came with him to do anything, but I'm unable to download location. I'm on a little Asus netbook that doesn't have a cd player, so the download is my only option.

  Any help would be appreciated.

  1-power in Greece is 220v. US power is 110V. DO NOT plug anything the United States of AMERICA except if you have a transformer. Your best bet is to buy stuff from 220v, processors use a lot of power, simply by changing the 110v. Your stuff will wear faster on a transformer, even with a good surge protector.

  -MORE USA power is 60 Hz, and most of the other countries are running 50 Hz. Our microwave USA did not still in Germany. A plug in clock radio will run slow 10 minutes / hour. Your TV etc... The Federal Republic of Yugoslavia will be there faster than buying just the 220v stuff.

  2 - If the cable you speak is designed only for the Sansa, it will seek to plug it into your computer. IF it was for iPod, DO NOT USE IT ON A SANSA, it will RUIN the Sansa!

  3. you should be able to copy music from the Sansa to a PC IF it was transferred with MSC mode. If it is via MTP mode you can probably do it, but it will be more complicated. (= The Sansa MSC mode it's a disc hard when it is plugged into a PC. MTP mode more like the 'ipod' mode so you can use the copy-protected (DRM) files. I NEVER use MTP mode. It blows).

  4. you will not need any software to transfer music or mode: the Netbook will need Windows Media Player 10 or newer (go to microsoft.com to download) to MTP mode. Nothing is required for the MSC mode, if you have Windows XP on this netbook.  (If you have linux it will be a bit more complicated).

• Parental control: I am the admin of the computer and the computer won't let me access the list allow and block my child's account

  I am the administrator of the computer and the computer won't let me access the list allow and block my child's account.  I'll bring my parental control password, click on my childs account, put parental controls, go to web filter and click on block some web sites, click on edit the allow and block list and the computer tells me that it is not able to make changes to parental controls settings and see the system administrator if the problem persists.

  Hi Ranw,

  ·        What is the error message when you try to change parental controls?

  ·        Have you been able to make any changes on this computer from your account earlier?

  You can follow the steps below and check if you can make changes to the parental controls on your computer.

  Step 1:

  Disable UAC (User Account Control) and check the result. Access the link below and follow the steps to disable UAC.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

   

  Step 2:

  I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

  Create a user account:http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account

  Check out the link below to check if the parental control is properly set:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try clicking on my start in windows mail page icon, mail, or the app won't open and instead this system32 folder opens.

  Original title: windows problem

  someone has an idea, when I try to click on my start page icon in windows mail, the mail or the app won't open and instead opens this system32 folder.  I don't know what the problem is?  I bought Kaspersky and it works constantly to keep my computer which, incidentally, is like 7 months safe and secure.  Someone knows what's going on and or how to solve this?  also, when I open the file in windows Explorer, it is immediately as does not.  to frustrate and the computer runs very slowly because of these problems?   HELP HELP HELP...

  Try to test in safe mode, and then try to test in a clean boot.

  How to start Windows 8 in Mode safe
  http://www.bleepingcomputer.com/tutorials/start-Windows-8-in-safe-mode/

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-AU

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  What happens if you create and test with another Windows user rather than your current user?

  Create a Windows 8.1 user account
  http://Windows.Microsoft.com/en-AU/Windows/create-user-account#create-user-account=Windows-8

  Using the Task Manager, take a look on the Details tab and see what program uses all CPUS.  It will be the program that slows down your computer and your slowness of cause.

  How to use the new task manager in Windows 8
  http://www.howtogeek.com/108742/how-to-use-the-new-task-manager-in-Windows-8/

  I know you have Kaspersky but it might be time for a second opinion.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  They are manual scans and only run when you tell them to do.

  See if the program can diagnose any problems with applications and correct.

  Download and run the troubleshooter modern UI App and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

• How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif

  How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif file comes from a document by using the fax & Scan app scanner in Windows 10.  I am running Adobe Acrobat Reader DC, which I run with my subscription 'Adobe PDF package, monthly'.  It worked fine until about a month.  I've since upgraded to Windows 10 and Acrobat Reader DC.   I would be very grateful for any help. Eoghainn

  Hello

  This problem has been reported as a bug. Our team of engineers working on this priority issue.

  Kind regards
  Nicos

• I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30-45 minutes

  I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30 to 45 minutes.  I checked to be sure there is no Adobe folder in my program files.

  Hello

  Please check the help below document:

  Error download or update Adobe Creative Cloud applications

  You can also view the nets below where the issue has been addressed:

  Error 207 to "install Adobe".

  Adobe creative cloud installation does not work. Get the error code 207. All solutions?

  Kind regards

  Sheena

• Look guys, I've been a good customer of yours over many, many years. OK I am a private citizen & not worth millions to you but I've been a good customer of your for many years of mny. I have CS 3 design and can not turn it off because the program won'

  Look guys, I've been a good customer of yours over many, many years. OK I am a private citizen & not worth millions to you but I've been a good customer of your for many years of mny. I have CS 3 design and can't turn it off because the program won't let me ' cos of a system error. I need help, but I don't get it! Talked with your technical staff who told me that they onl deal with CC matters. I tried to use your tips online and support without success! 24 / / 7 chat support is not available, so I appeal to you directly off my CS 3 Design so I can use all the programs on the Vista platform. As a citizen in my mind, I've spent a lot of money on your please help me here if for no other reason than for moral and ethical reasons over the years. I think that you have a duty of care, you take my money and fail to support me!  Best regards, Iain Hirst.

  Please see:

  Learn how to enable or disable Adobe applications.

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-help.html

  I hope this helps.

  Concerning

  Megha Rawat

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.