HP Photosmart5520: The failure of the 0xc19a0042 printer message

Similar Questions

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• I get the 0xc19a0042 ink system failure on my HP Photosmart B210 printer

  I followed the instructions for disassembly and cleaning the printhead twice, as well as to disconnect and reconnect and the 0xc19a0042 ink system failure message continues to show and I can't print or scan with my B210 printer. I now seek to replace the print head, but could not find the info on all the links from HP that I have searchded. Any help suggestions greatly appreciated.

  And if you are in the United States and want to order it from the hp online store: http://www.shopping.hp.com/en_US/home-office/-/search-Browse?SearchParameter=%26%40QueryTerm%3DPhotosmart%2BB210%2Bprinthead%26prodsubgrp%3DPrintheads&PageSize=15&SearchTerm=Photosmart+B210+printhead

• As of today, I entered a withdrawal check in Microsoft Money and used the option print. It doesn't then gives the option 'Print cheques' as he has always in the past. How do I print the failure?

  Today, I went in a transaction of withdrawal in Microsoft Money 2005 and used the option 'print '. It does not have the option 'Print cheques' as he has always in the past. How to print the check now?

  Support for MS Money ended on January 31, 2011...

  01/31/2011: the end is near! If you have not already meditated it, now may be a good time to start... (01-jan - 11 & ff)
  http://social.Microsoft.com/forums/en/money/thread/2a40ad46-2258-4637-8941-9a1dc9a624aa

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You will find support remaining (as it is) for MS Money in this forum: http://social.microsoft.com/Forums/en/money/threads

• failure of pre-flight print saved PDF files through the "save under" function because of the current JavaScripts

  How can I disable using JavaScript in a PDF file that is saved with "Save as" option? PDF files print via postscript and distill are without JavaScript. PDF files that contain any JavaScripts fail the printing process before the flight and so we need to know how to disable all the JavaScripts in a PDF file even if Save as function is used to generate a PDF file.

  Thank you

  Peter

  Peter,

  I looked a little more on it, and regardless if you're reviewing post-processing routines or not, it seems that FM now always writes a javascript model when you use the SaveAsPDF routines. The script is actually empty, that is, it identifies the source as coming from FM, and here is the script embedded in the PDF document [he hasn't]:

  //

  FrameMaker

  //

  / * belongs to: Document-level: FrameMaker * /.

  //

  //

  It seems that your options are limited here. You cannot use the SaveAsPDF road and get rid of the script to the end of the FM of things. So you can use AcrobatPro to sanitize the document, create a script that will remove the javascript or talk to your printing provided by supplier to see if they will let the script above spend their pre-flight.

  Alternatively, use the print function to create your postscript and then distilling to create the final print-ready PDF. If you need to create a CMYK & Spot ready color output using the way of printing, then you will need to use GrafikHuset (today a freebie) PubliPDF in postscript output FM CMYK + Spot PDFs. download convert RGB:http://design.grafikhuset.dk/index.php/kontakt/downloads/grafikhuset-publi-pdf and more details available at the: http://www.grafikhuset.net/PubliPDF/

• Put option on the page does not work in the Easy Print VI Panel, controls tabs are not displayed

  Found two problems with the screw of report generation:

  (1) in the Panel of VI feel easy (report generation) or the Documentation.vi, the layout options don't work (dug in the sub - VI and found that they are not connected to anything).

  (2) If you have the controls or the lights in a tab control and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they do not appear. The only indications/commands that appear are those that are displayed on all tabs (that is to say, to create a control and move it over the tab control so that it appears on every page).  There's a Subvi (Expand_control_ref_with_nested_controls.vi) which is called to handle the nested controls (IE, grapes, berries, etc...), but it should have a case to handle the controls tab.

  Hey Sajosie,

  Dig into the Sub - VI you are right in saying that the Options available to the user input is not connected to anything for most cases. However, in the case of failure to "Quick Print" Layout Options are used to change the layout of the report. In help for this VI, he mentions that this entry is ignored for the report "Standard reports" and "HTML" options However, it does mention that this ignorance of Layout Options is expected for the 'word' or 'Excel' reports.

  Especially regarding the controls and indicators in the report which appear on the tab controls, I can make a product suggestion to do this kind of design more compatible with the mere impression VI Panel façade or Documentation.

• Cannot connect Windows XP to the wireless printer.

  WINDOWS XP PRINTER WI - FI CONNECTION

  I have Windows XP Media Center Service Pack 3 OS that worked a HP Photosmart Plus B209 a - m with a USB cable.  Since I just bought a new laptop (Windows 7 Professonal OS) I decided to create a home network with a router Cradlepoint MBR 900.  The two laptops (XP and 7 OSs) were connected to the internet via the router with no problems.  Windows 7 Pro OS laptop is connected wireless to the printer Photosmart Plus, I had implemented as confiquiration wireless the printer first.  But the failure of the attempt to get the OS Windows XP Media Center to connect to the wireless printer.  During the installation process to connect the printer to the XP system wireless it asked me to choose which printer I wanted to connect to.  The Photosmart Plus printer was selected and visible, then I clicked Next.  Shortly after, a small screen appeared stating the "serscan.sys" file could not be found and I have to insert a Windows XP Pro CD to get the file or run the installer of this file.  This issue has occurred both when I tried to install it with the CD provided by HP and when I tried installing the HP download website.  All I have is a recovery for Windows XP disk provided with the laptop and not a CD Windows XP Pro.  What should I do to fix this?  Thanks, Lonnie

  Thanks, that was fast.  Please, let me make sure I have this correct.  First of all, I have two recovery disks provided with the computer, with Windows XP Media Edition and one for the drivers.  I should not use either of these disks, right?  If I had the previous correct answer then let me ask the following question;  When looking to borrow the disc should be Windows XP Media Edition or can I borrow any disk of Windows XP?  Kim Merci for your help continues.  Lonnie

  Lonnie,

  Before the hunting around for friends who might have a CD, do the following research.  For each of them, make sure that you have checked the search options in the 'Advanced Options' to

  • Search system folders
  • Search for files and hidden folders
  • Search subfolders

  Search your entire hard drive and both CDs you have to serscan.  Do not include the .sys at the end of the file name.

  Search for Driver.cab.  Report of the Office (s).  On your hard disk, you should find one or both

  • C:\Windows\i386\Driver.cab
  • C:\Windows\Driver Cache\i386\driver.cab

  You can also find these files on the "recovery disk".

  Report what you find, including locations of found nothing.  It is possible (but I don't think likely) you will find a file named serscan.sy_ - If Yes, include this information in your results.

  Or, if you want to ignore all this, you can download serscan.sys since my SkyDrive-->

  https://SkyDrive.live.com/redir.aspx?CID=18b259158254905b&RESID=18B259158254905B! 225 & Thierry = 18B259158254905B! 214

  The file should go to C:\Windows\system32\dllcache (a hidden directory) and probably in C:\Windows\system32 (I do not use this file, if it is not in my system32 folder).

  Or you can just save it to your desktop and "direct the Setup" it there (if you do this, check more later to confirm that he got into C:\Windows\system32\dllcache and if not, put a copy).

• error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or reboot the machine.

  Hello
  After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed.  Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
  Thanks in advance,
  Chris.

  Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• When I select print for a message preview mode, I get an error "the selected printer is not found." I can print the message, but I can't preview the output. I have

  I found that someone else has had this problem, but solution of Matt necessary use of the configuration editor. I followed the instructions, but by clicking on the Advanced tab, there was no Config Editor tab in order to execute the next step of the solution. BTW, I look in the console error log and see what: couldn't read the chrome manifest ' queue: / / / C:/Program % program % 20Thunderbird 20(x86) /Mozilla % 20Files / chrome.manifest'. The error itself is small box with Print Preview error as the label and The selected printer is not found as the contents of the box. Any help much appreciated.

  You look under Tools | Options | Advanced | General? In the main menu, which is the traditional one that spans the top of Thunderbird?

• I want to change the default printer for Firefox how can I do this?

  When I choose to print in Firefox it uses my printer copier not my default printer. So how can I change the default printer for Firefox?

  In Firefox 'by default' is the last used printer. If you switch to a different printer, Firefox to remember that a new 'default' - unless you have disabled this setting in all: config. Print.save_print_settings

• How to change the default printer in Thunderbird

  I have access to several printers that I use in different places. I have to manually change the choice of printer with each e-mail letter I want to print when I change my location when you use thunderbird. I already changed the default printer in my printers folder. All other programs, including Firefox accept the choice of the default printer. How can I get Thunderbird to accept my default without delete all THE OTHER PRINTERS?

  The menu bar, select Tools-Options-Advanced-General
  Select the configuration editor
  Promise to be careful
  Enter the following in the search field: print_printer
  When this line appears, right-click and select reset.

  See if she resumes the new default printer after you restart Thunderbird.

  No menu bar? Press the ALT key.

• HP F4400, prints the last print issue when put to sleep

  Just had a weird problem start.   My wife was going to print something and haven't noticed any paper in the printer, so it wouldn't print.  When the paper loaded and only handed over running it printed fine.  But now, whenever I put my iMac to sleep, in a minute or two, it will print another copy of the final printed piece.  It happens every time he is put to sleep.   Strange... that is clear... any idea?

  Thank you

  Looks that work would fit in the heart of the printing system called CUPS then try a reset of the print system. Open Printers and scanners, mouse over the list of printers and right-click (or hold down the Ctrl key, and then if the right click disabled). A context menu will appear. Select Reset and authenticate when prompted. Note that this deletes all printers printers & Scanners, but not pilots supported, so you will just need to add printers again.

• Thunderbird keeps by default to use the incorrect printer. How can I fix it?

  My default printer for all programs should be a Canon printer. Thunderbird by default keeps the Adobe PDF printer. I can change it to the correct printer when the print dialogue box appears, but it is annoying to have to do every time. I don't know what changed so that by default in thunderbird is adobe.

  Here is a simple solution that has worked for me.

  I am on Windows 7 and I have two HP printers installed. I don't know if it works for the Adobe PDF printer. Thunderbird has never missed this for me.

  In Control Panel, look for Hardware & Sound. Under this heading, click on printers and display devices.

  Open (double-click) the printer that you want to disable in Thunderbird.

  Double-click Customize your printer.

  Click the Advanced tab.

  Select available to, and then once you do not usually print email (I chose 12 am to 01:00). I do not change the setting of priorities.

  Click on apply and then OK.

  That should do it. I stopped and restarted, and Thunderbird, the default printer is now the one that I want.

• How to print a document all e-mail and not a 'screenshot' that I get in the option Print Preview.

  How to print a document all e-mail and not a 'screenshot' that I get in the option Print Preview. I would like to print "file" "as I can on other browsers (IE, for example). When I try to print from Firefox it catches all my info (shirts, etc.) from the left side of the page. I need only e-mail information, not information of the entire screen. Thank you!

  -Bruce

  I had the same problem at first. You open the e-mail as usual. And then in the Actions drop-down list box, you select the print option. This has worked for me and printed the actual e-mail only.

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!