Help try to calculate and interpret the value of data in the table

Trying to create a form field that would calculate / interpret a value to use for NGN based on certain values WT and Temp.

E.g.  At 20 degrees and a weight of 20, my Rng will be 600.  A weight of 15, my Rng will be 537.

How can I use a picture to help me to calculate what would be my Rng value if my WT value falls anywhere between two of the values listed WT?

Thanks in advance for any help.

Screen Shot 2016-09-19 at 2.40.02 PM.png

Yes, if you use a multidimensional array.

Tags: Acrobat

Similar Questions

  • Windows 7 64 bit worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

    worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

    Hello Hans,.

    Thanks for choosing Microsoft Community!

    According to the description of the problem, you have problems when you use the backup on Windows 8 feature.

    Please answer these questions to better understand the issue and help you:

    1. are - what you're talking to backup and restore functionality on Windows 7?

    2 have you made any changes to the computer before the show?

    It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors

    Check your hard drive for errors:

    http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    For more information:

    Backup and restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

    Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

  • Whenever I try to evaluate and improve the performance of the computer, I get a type of white blue screen telling me I have bad software or hardware and my computer does climb?

    Whenever I try to evaluate and improve the performance of the computer, I get a type of white blue screen telling me I have bad software or hardware and my computer does climb? He did NOT finish the task is content to any screen blue screen saying it's bad it's bad, your computer is messed up bigtime, so-to-speak

    Hi Cynthia,.

    1 have you ever done any hardware or software changes to the PC?

    2. What is the brand and model of the PC?

    3. What is the full error you get when you try to evaluate the computer?

    Audit of the statues of the device in the Device Manager.
    a. click the Start button, type devmgmt.msc and press ENTER.
    b. check for any exclaimation mark and the status of the devices.

    Follow these methods.

    I suggest you to first run the resolution of performance problems.

    Method 1: Open the resolution of Performance problems
    http://Windows.Microsoft.com/en-in/Windows7/open-the-performance-Troubleshooter

    Method 2: Disconnect non-essential external devices and try to evaluate the computer.

    Method 3:  Also, temporarily disable the antivirus and check the question.  Anti-virus programs are sometimes called causes this problem.

    Turn off the Antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Let us know if it helps. If the problem persists, please answer, we will be happy to help you.

  • Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two in

    Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two inaccurate statements. I GET NOTHING BUT NOTHING ADOBE 'SUPPORT '.  How can I get just the program open and running?

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

    Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

    Try to force the lightroom Installer to run in Windows 7 mode:

    Right-click on the Setup file and select Properties option.

    Then click on the Compatibility tab.

    The value of the Windows 7 operating system and check.

  • There was an error Code Ox800710D9 when you try to update and install the Windows SP2

    I can't update Windows XP SP2 due to an Ox800710D9 error code.

    Hi frankhunt,

    Try these steps and check the result.
    Step 1: Stop the Cryptographic Service
    a. Click Start, click Run, type services.msc in the Open box and then click OK.
    b. in the Services dialog box, click Cryptographic Services, and then click Properties.
    c. in the cryptographic services properties dialog box, click the general tab and then click on stop.
    Option Service status changes to Stopped.

    Step 2: Remove the Windows Update.log files
    a. Click Start, click my computer and then double-click the hard disk where Windows XP is installed. For example, double-click the C drive.
    b. click the Folders box, click the Windows folder and then click the System32 folder.
    Note If you receive the following message appears, click Show the contents of this folder:
    "These files are hidden.
    This folder contains files that keeps your system works correctly.
    You should not change its content. »
    c. click on / open the CatRoot2 folder.
    d. remove the Edbxxxxx.log file.
    Note: In this step, xxxxx is a placeholder that can represent any combination of letters and numbers, numbers or letters.
    e. Click Start, click my computer and then double-click the hard disk where Windows XP is installed. For example, double-click the C drive.
    f. click the Folders box, click the Windows folder and then click the Security folder.
    Delete the file Edbxxxxx.log.
    Note: In this step, xxxxx is a placeholder that can represent any combination of letters and numbers, numbers or letters.

    Step 3: Start the Cryptographic Service
    a. Click Start, click Run, type services.msc in the Open box and then click OK.
    b. in the Services dialog box, click Cryptographic Services, and then click Properties.
    c. in the cryptographic services properties dialog box, click the general tab and then click Start.
    The service status option changes Started.

    Step 4: Install the service pack
    a. visit the Windows Update Web site to update the computer to Windows XP SP2: http://windowsupdate.microsoft.com
    b. install the update and check the result.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • File appears not 'supported' when I try to open and put the figure in Photoshop CC.

    Hi all, after have exported them to my fuse CC library, the file appears as "Not supported" when I try to open and put the figure in Photoshop CC. Any ideas?

    You couldn't be on the version more up-to-date for Photoshop.  Fuse support characters was added only in the version of November 30, 2015 of Photoshop.  If you have an older version that he cannot understand what is the nature of fuse.

  • Help with excel import and delete the page script

    Hello. I will try to make it as simple as possible. I have some data from excel (saved as delimited by tabs) that I need to import in a 5 PDF page. I use the script below to import, and it works fine. All import fields and records the individual (one for each record) PDF. However, I need to extend this functionality by removing some pages before it saves the document by looking at the different boxes. The code below is what I use to import the records.

    // specify the filename of the data file
var fileName = "/Users/MacMike/Desktop/Test.txt";  // the tab delimited text file containing the data
var outputDir = "/Users/MacMike/Desktop/Dump/";    // make sure this ends with a '/'

var err = 0;
var idx = 0;
while (err == 0) {
    err = this.importTextData(fileName, idx);    // imports the next record

    if (err == -1)
        app.alert("Error: Cannot Open File");
    else if (err == -2) 
        app.alert("Error: Cannot Load Data");
    else if (err == 1)
        app.alert("Warning: Missing Data");
    else if (err == 2)
        app.alert("Warning: User Cancelled Row Select");
    else if (err == 3)
        app.alert("Warning: User Cancelled File Select");
    else if (err == 0) {
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf"); // saves the file
        idx++;
    }
}

    As I said before you import works surprisingly well.

    My PDF consists of 5 pages (info-registration, p1 = Dir-contract = p0, p2 = contract ndarp-brand, p3 = takes-contract, p4 = agreement must be brand). My idea is that on the import of data, the script will look at a few check boxes and determine which contracts to remove on the PDF and then save. I wrote the syntax of which, in my view, what it should look like. I'm not a programmer and know just a little bit. I looked through the documentation and this is what I came with. I don't know how to combine to work. Here's the code I came up with that.

    var dir = this.getField("Associate Director"); // checkbox
var aldir = this.getField("Alumni Director"); // checkbox

var fac = this.getField("Facilitator"); // checkbox
var alfac = this.getField("Alumni Facilitator"); // checkbox

var oyb = this.getField("Optimize Your Brain"); //checkbox
var poyb = this.getField("DVD and Workbook Previously Purchased"); // checkbox

// Below are all the possible training options.
if (dir.value=="Checked" || aldir.value=="" || fac.value=="" || alfac.value=="" || oyb.value=="" || poyb.value=="") {
    this.deletePages({nStart:3, nEnd:4})
}
else if (dir.value=="" || aldir.value=="Checked" || fac.value=="" || alfac.value=="" || oyb.value=="" || poyb.value=="") {
    this.deletePages({nStart:3, nEnd:4})
}

else if (dir.value=="" || aldir.value=="" || fac.value=="Checked" || alfac.value=="" || oyb.value=="" || poyb.value=="") {
    this.deletePages({nStart:2, nEnd:4})
}
else if (dir.value=="" || aldir.value=="" || fac.value=="" || alfac.value=="Checked" || oyb.value=="" || poyb.value=="") {
    this.deletePages({nStart:2, nEnd:4})
}

else if (dir.value=="" || aldir.value=="" || fac.value=="Checked" || alfac.value=="" || oyb.value=="Checked" || poyb.value=="") {
    this.deletePages({nStart:2, nEnd:2})
}
else if (dir.value=="" || aldir.value=="" || fac.value=="" || alfac.value=="Checked" || oyb.value=="Checked" || poyb.value=="") {
    this.deletePages({nStart:2, nEnd:2})
}
else if (dir.value=="" || aldir.value=="" || fac.value=="Checked" || alfac.value=="" || oyb.value=="" || poyb.value=="Checked") {
    this.deletePages({nStart:2, nEnd:2})
}
else if (dir.value=="" || aldir.value=="" || fac.value=="" || alfac.value=="Checked" || oyb.value=="" || poyb.value=="Checked") {
    this.deletePages({nStart:2, nEnd:2})
}

else if (dir.value=="Checked" || aldir.value=="" || fac.value=="" || alfac.value=="" || oyb.value=="Checked" || poyb.value=="") {
    this.deletePages(none) // I realize this is incorrect. Just showing that this option results in no deleted pages.
}
else if (dir.value=="" || aldir.value=="Checked" || fac.value=="" || alfac.value=="" || oyb.value=="Checked" || poyb.value=="") {
    this.deletePages(none) // I realize this is incorrect. Just showing that this option results in no deleted pages.
}
else if (dir.value=="Checked" || aldir.value=="" || fac.value=="" || alfac.value=="" || oyb.value=="" || poyb.value=="Checked") {
    this.deletePages(none) // I realize this is incorrect. Just showing that this option results in no deleted pages.
}
else if (dir.value=="" || aldir.value=="Checked" || fac.value=="" || alfac.value=="" || oyb.value=="" || poyb.value=="Checked") {
    this.deletePages(none) // I realize this is incorrect. Just showing that this option results in no deleted pages.
}

else if (dir.value=="" || aldir.value=="" || fac.value=="" || alfac.value=="" || oyb.value=="Checked" || poyb.value=="") {
    this.deletePages({nStart:1, nEnd:2})
}
else (dir.value=="" || aldir.value=="" || fac.value=="" || alfac.value=="" || oyb.value=="" || poyb.value=="Checked") {
    this.deletePages({nStart:1, nEnd:2})
}

    How to combine these two so that I can create a document temp import my data, check the boxes to check off and delete the appropriate pages and save the file and then go to the next record? I got the first part done. It imports large and has the right, but I don't know what to do next. Thanks for any help!

    Or y at - it another way to do this?


    Michael

    Wow. Ok. I had it works beautifully. There was a lot of trial and error. Because the script as it was would have, would open the original PDF, delete the pages needed, then save the file. While it would be to go to the next record is missing pages in PDF and bomb to open. I hunted and searched for a way to do this. I found "this.insertPages" in the documentation. Finally, what worked was so move the "save under" in the service and put it under every variation of check. So now when checking the boxes, he performs the check, removes the mandatory pages, stops, insertions of back in deleted pages from the original file, leave the service and finally goes to the next record.

    Here is my final script:

    // This code looks at an excel (tab delimited) file, imports the records into a PDF form 10 Pages long.
// Then checks a series of checkboxes and deletes the pages that aren't associated with first page.
// After it deletes these pages it reinserts the deleted pages so it can do the checks for the next record in the (tab delimited) file.

// variables for importing excel data
var err = 0;
var idx = 0;
var fileName = "/Users/MacMike/Desktop/Test.txt";  // the tab delimited text
var outputDir = "/Users/MacMike/Desktop/Dump/";    // make sure this ends with a '/'

//Checking a bank of 6 checkboxes and determine which pages need to be deleted, save the file, and the insearch the deleted pages again.
function seekandDestroy() {
    if (dir.value=="Checked" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Off") {
        this.deletePages({nStart:6, nEnd:9})
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
        this.insertPages({nPage:5, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:6, nEnd:9 });
    }
    else if (dir.value=="Off" && aldir.value=="Checked" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Off") {
        this.deletePages({nStart:6, nEnd:9})
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
        this.insertPages({nPage:5, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:6, nEnd:9 });
    }

    else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Checked" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Off") {
        this.deletePages({nStart:3, nEnd:9})
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
        this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:9 });
    }
    else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Checked" && oyb.value=="Off" && poyb.value=="Off") {
        this.deletePages({nStart:3, nEnd:9})
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
        this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:9 });
    }

    else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Checked" && alfac.value=="Off" && oyb.value=="Checked" && poyb.value=="Off") {
        this.deletePages({nStart:3, nEnd:5})
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
        this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:5 });
    }
    else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Checked" && oyb.value=="Checked" && poyb.value=="Off") {
        this.deletePages({nStart:3, nEnd:5})
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
        this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:5 });
    }
    else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Checked" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Checked") {
        this.deletePages({nStart:3, nEnd:5})
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
        this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:5 });
    }
    else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Checked" && oyb.value=="Off" && poyb.value=="Checked") {
        this.deletePages({nStart:3, nEnd:5})
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
        this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:5 });
    }

    else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Checked" && poyb.value=="Off") {
        this.deletePages({nStart:1, nEnd:5})
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
        this.insertPages({nPage:0, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:1, nEnd:5 });
    }
    else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Checked") {
        this.deletePages({nStart:1, nEnd:5})
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
        this.insertPages({nPage:0, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:1, nEnd:5 });
    }
    else if (dir.value=="Checked" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Checked" && poyb.value=="Off") {
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
    }
    else if (dir.value=="Checked" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Checked") {
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
    }
    else if (dir.value=="Off" && aldir.value=="Checked" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Checked" && poyb.value=="Off") {
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
    }
    else if (dir.value=="Off" && aldir.value=="Checked" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Checked") {
        this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf")
    }
}

// Imports records does the above function then go the next record, all the while doing error reporting.
while (err == 0) {
    err = this.importTextData(fileName, idx);    // imports the next record

    if (err == -1)
        app.alert("Error: Cannot Open File");
    else if (err == -2)
        app.alert("Error: Cannot Load Data");
    else if (err == 1)
        app.alert("Warning: Missing Data");
    else if (err == 2)
        app.alert("Warning: User Cancelled Row Select");
    else if (err == 3)
        app.alert("Warning: User Cancelled File Select");
    else if (err == 0) {
        var dir = this.getField("Associate Director"); // checkbox
        var aldir = this.getField("Alumni Associate Director"); // checkbox
        var fac = this.getField("Facilitator"); // checkbox
        var alfac = this.getField("Alumni Facilitator"); // checkbox
        var oyb = this.getField("Optimize Your Brain Site Coordinator"); //checkbox
        var poyb = this.getField("DVD and Workbook Previously Purchased"); // checkbox
        seekandDestroy(dir, aldir, fac, alfac, oyb, poyb); //performs the above function
        idx++; //goes to next record
    }
}

  • The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

    Recharging according to the printing software and get always the same error.

    Hello

    You must ask in the answers – Windows Forums for your version of Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    How to ask a question
    http://support.Microsoft.com/kb/555375

    ==================================

    Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

    Check with the printer manufacturer for updated drivers and support for known issues.

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ==================================

    Follow these steps in the kind of prerequisites:

    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ------------------------------------------------------

    References to Vista also apply to Windows 7.

    Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
    to install - make a right-click on the pilot - run as administrator.

    Also check with the manufacturer of your printer and forums support.

    --------------------------------------

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------

    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
    http://wiki.blackviper.com/wiki/Print_Spooler

    BlackViper Windows 7 Service - default settings
    http://www.blackviper.com/Windows_7/servicecfg.htm

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Error 0x8007000D try to move and rename the file

    Hi, I'm Ayu. I have problem when you try to move the folder and rename the folder, error 0x8007000D: these data are incorrect, still stood. Someone help me please.

    Thank you

    Hello

    The most likely cause is a 3rd party antivirus/security program or some sort of system optimizer
    (these are all snake oil). If using a 3rd party antivirus uninstall completely and use MSE - free.

    List of tools to clean/uninstall anti-malware programs
    http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

    Uninstallers (removal tools) for common antivirus software
    http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

    MSE - free
    http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

    ================================================

    All the methods in this article may apply

    Error: Windows Explorer has stopped working
    http://support.Microsoft.com/kb/2694911

    Follow these steps:

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows
    Vista or Windows 7
    http://support.Microsoft.com/kb/929135

    Use advanced tools to solve performance problems in Windows 7
    http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

    ==================

    If nothing else work (and you should try all the above first) then make a new account. Switch
    and see if it works there. If so, you will need to migrate to the new.

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • HELP: When I export and play the video, the video is 'cropped '!

    Hallo

    I really need help and I would greatly appreciate if someone could help me.

    Where to put my clips in first Elements 8, are looking for fine but when I export him are "cropped" and are not played in 'full screen '. That's how the video looks like: http://www.youtube.com/watch?v=DpyEHqpEj7E

    I tried to export to SEVERAL different formats and other things, but none of this does not work. Is there som settings wrong or...? in the recording, editing or exporting?

    I hope understand you my crap English and will try to help me.

    -Stefan

    Start a new project in Premiere Elements.

    Before saving the project to a folder, go to settings and select the project settings for this camcorder.

    You have to shoot in full HD or full EN in order to use this video in first Elements 8, and then select the project preset for 1920 x 1080 AVCHD stereo.

    If you do this, your video should change quite effectively in Premiere Elements and your output, using one of the presets hand standard, should not appear cropped.

  • I tried to install a new of Lightroom 6 copy and after enter the S/Ns, I get an indicator which is does not support Windows Vista. My operating system is Windows 7. I tried to re - start my computer and try to reload and get the same error.

    I tried to install a new copy of Lightroom 6 and he says I have Vista OS but my OS is Windows 7. I tried to restart the computer and reload the software but get the same error. Any suggestions?

    See the link below:

    trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  • Help to update all rows in the Table with a sequence

    Hi all

    I have a table with the name Report_Status, now we have added a new [Batch_ID] column in the table. The new column takes a value in a sequence. Can someone tell me a normal SQL queries or the procedure for updating each line in turn to an existing table in the value of the sequence? We cannot delete the existing data, must be added for each record batch code.

    example of name of sequence: Report_Status_Batch_ID_SEQ

    Report_Status name and the column name of the table Batch_ID

    Thanks for your time to help out me.

    Kind regards

    Ashish

    Thanks John,

    or I could write as update dept set id = ID_SEQ. NEXTVAL;

    This also works. Thanks for the idea.

  • How to use FTP Client and manage the table in BB with JDE

    I'm a newbie to BB development. I have an application in mind, it is a simple ordering application. BB users can send order information to an ftp server. The BB will have some paintings as a customer table and the Order Details table (the two have only a few records). Since cannot use the Services of SDM BlackBerry because the license fees. I'll use JDE to develop the application.  Here are my questions:

    1. What is the best way to manage the tables (read/write)?  RMS, or embedded database (which one?)
    2. is there any ftp client in JDE, api can be used to send data to an ftp server?

    Thanks for help.
    PJ

    The exact figures for RMS sizes are available in this article:

    What is - size restrictions when you use the RecordStore
    Article number: DB-00656
    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800724/What_Is...

    So that your information is correct, in 4.6 or later, the per application limit went up to 512 KB.  I don't know if there is a limit on a single record in a record store. We must be careful of the terminology here, it's RecordStore or RMS - is not in BlackBerry terms anyway, PersistentStore (see next).

    The BlackBerry offers two other ways to store data.

    The first and most commonly used are called PersistentStore, and it is an a storage mechanism for objects, I am not aware of any restrictions, other than the memory of the device, about the size of an object that can be stored in PersistentStore.  The advantage with PersistentStore, is that you just persist an object helps you, rather than having to convert it to bytes (serialize) before storing and converting new (him deserialize) after reading it back.

    The second way is to write data using the FileConnection API, and you can for example use this to write data to the SD card in the device.

    EFF and PersistentStore use the flash memory in the device.  You don't have to manage yourself.  You treat all that identical objects, the BlackBerry operating system very cleverly manages to bring your items in RAM and save them in Flash, so you don't have to worry about the type of storage you have.

    I hope this helps.

  • Only one Integrator for export csv to table and update the table?

    Hello
    I have a requirement where I need to create a single Integrator for export data in the CSV file into a custom oracle table and also use the same Integrator to download and update the custom table data. Is it possible to do this in a single Integrator.

    Thank you
    Kishore

    Yes you can do it.

    You must create a type of UPDATE metadata Integrator.

    First time:

    Custom table is empty.

    WEB ADI will download a blank Excel sheet. Copy the data from the CSV file and paste this Excel.Then download this file that will update the Integrator.

    A sample example is as follows:

    web_adi_pkg.main (param_1, param_2,... param_n)
    download_data;
    upload_data;

    Download data-> select query to download the data (select * from custom_table)
    Download the data-> insert into custom_table where NOT EXISTS (select 1 from custom_table where primary_key = primary_key_col_from_csv)
    update of custom_table where there are (select 1 from custom_table where primary_key = primary_key_col_from_csv)

    Please try above logic.

Maybe you are looking for