Help with a few desktop esx4i server configuration steps

Similar Questions

• Help with customer 501 pix for the configuration of a site...

  Hello everyone, I am trying to set up a customer vpn site and after a few days

  I'm at the end of the roll.

  I'd appreciate ANY help or trick here.

  I tried to set up the config via CLI and PDM, all to nothing does not.

  Although the VPN client log shows the invalid password, I am convinced that the groupname password is correct.

  I use the Cisco VPN Client 5.0.07.0290 v.

  -----------------------------------------------------------------

  Here is HS worm of the PIX:

  Cisco PIX Firewall Version 6.3 (5)
  Cisco PIX Device Manager Version 3.0 (4)

  -----------------------------------------------------------------

  Here's my sh run w / passwords removed:

  pixfirewall # sh run
  : Saved
  :
  6.3 (5) PIX version
  interface ethernet0 10baset
  interface ethernet1 100full
  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  activate the encrypted password to something
  that something encrypted passwd
  pixfirewall hostname
  domain ciscopix.com
  fixup protocol dns-length maximum 512
  fixup protocol ftp 21
  fixup protocol h323 h225 1720
  fixup protocol h323 ras 1718-1719
  fixup protocol http 80
  fixup protocol they 389
  fixup protocol rsh 514
  fixup protocol rtsp 554
  fixup protocol sip 5060
  fixup protocol sip udp 5060
  fixup protocol 2000 skinny
  fixup protocol smtp 25
  fixup protocol sqlnet 1521
  fixup protocol tftp 69
  names of
  access-list ping_acl allow icmp a whole
  permit 192.168.1.0 ip access list inside_outbound_nat0_acl 255.255.255.0 192.168
  . 50.48 255.255.255.248
  outside_cryptomap_dyn_20 ip access list allow any 192.168.50.48 255.255.255.248

  pager lines 24
  Outside 1500 MTU
  Within 1500 MTU
  IP address outside pppoe setroute
  IP address inside 192.168.1.1 255.255.255.0
  alarm action IP verification of information
  alarm action attack IP audit
  IP local pool vpnpool 192.168.50.50 - 192.168.50.55
  history of PDM activate
  ARP timeout 14400
  Global interface 10 (external)
  NAT (inside) 0-list of access inside_outbound_nat0_acl
  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0
  Access-group ping_acl in interface outside
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + 3 max-failed-attempts
  AAA-server GANYMEDE + deadtime 10
  RADIUS Protocol RADIUS AAA server
  AAA-server RADIUS 3 max-failed-attempts
  AAA-RADIUS deadtime 10 Server
  AAA-server local LOCAL Protocol
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  SNMP-Server Community public
  No trap to activate snmp Server
  enable floodguard
  Permitted connection ipsec sysopt
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20
  Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-3DES-MD5 value
  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
  outside_map interface card crypto outside
  ISAKMP allows outside
  part of pre authentication ISAKMP policy 20
  ISAKMP policy 20 3des encryption
  ISAKMP policy 20 md5 hash
  20 2 ISAKMP policy group
  ISAKMP duration strategy of life 20 86400
  vpngroup address vpnpool pool vpnaccessgroup
  vpngroup dns 192.168.1.1 Server vpnaccessgroup 192.168.1.11
  vpngroup wins 192.168.1.1 vpnaccessgroup-Server
  vpngroup vpnaccessgroup by default-field local.com
  vpngroup idle 1800 vpnaccessgroup-time
  something vpnaccessgroup vpngroup password
  Telnet 192.168.1.0 255.255.255.0 inside
  Telnet timeout 60
  SSH 192.168.1.0 255.255.255.0 inside
  SSH timeout 5
  Console timeout 0
  VPDN group pppoe_group request dialout pppoe
  VPDN group pppoe_group localname someone
  VPDN group ppp authentication pap pppoe_group
  VPDN username someone something
  dhcpd address 192.168.1.100 - 192.168.1.110 inside
  dhcpd dns 206.248.154.22 206.248.154.170
  dhcpd lease 3600
  dhcpd ping_timeout 750
  dhcpd outside auto_config
  dhcpd allow inside
  Terminal width 80
  Cryptochecksum:307fab2d0e3c5a82cebf9c76b9d7952a
  : end

  -----------------------------------------------------------------------------------------------

  Here is the log of pix in trying to connect with the client vpn cisco w / real IPs removed:

  crypto_isakmp_process_block:src: [cisco vpn client IP here], dest: [cisco PIX IP here] spt:64897 TPD:
  500
  Exchange OAK_AG
  ISAKMP (0): treatment ITS payload. Message ID = 0

  ISAKMP (0): audit ISAKMP transform 1 against 20 priority policy
  ISAKMP: encryption AES - CBC
  ISAKMP: hash SHA
  ISAKMP: default group 2
  ISAKMP: long-acting prior auth (init)
  ISAKMP: type of life in seconds
  ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
  ISAKMP: keylength 256
  ISAKMP (0): atts are not acceptable. Next payload is 3
  ISAKMP (0): audit ISAKMP transform 2 against priority policy 20
  ISAKMP: encryption AES - CBC
  ISAKMP: MD5 hash
  ISAKMP: default group 2
  ISAKMP: long-acting prior auth (init)
  ISAKMP: type of life in seconds
  ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
  ISAKMP: keylength 256
  ISAKMP (0): atts are not acceptable. Next payload is 3
  ISAKMP (0): audit ISAKMP transform 3 against priority policy 20
  ISAKMP: encryption AES - CBC
  ISAKMP: hash SHA
  ISAKMP: default group 2
  ISAKMP: preshared auth
  ISAKMP: type of life in seconds
  ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
  ISAKMP: keylength 256
  ISAKMP (0): atts are not acceptable. Next payload is 3
  ISAKMP (0): audit ISAKMP transform 4 against 20 priority policy
  ISAKMP: encryption AES - CBC
  ISAKMP: MD5 hash
  ISAKMP: default group 2
  ISAKMP: preshared auth
  ISAKMP: type of life in seconds
  ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
  ISAKMP: keylength 256
  ISAKMP (0): atts are not acceptable. Next payload is 3
  ISAKMP (0): audit ISAKMP transform 5 against priority policy 20
  ISAKMP: encryption AES - CBC
  ISAKMP: hash SHA
  ISAKMP: default group 2
  ISAKMP: long-acting prior auth (init)
  ISAKMP: type of life in seconds
  ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
  ISAKMP: keylength 128
  ISAKMP (0): atts are not acceptable. Next payload is 3
  ISAKMP (0): audit ISAKMP transform against the policy of priority 20 6
  ISAKMP: encryption AES - CBC
  ISAKMP: MD5 hash
  ISAKMP: default group 2
  ISAKMP: long-acting prior auth (init)
  ISAKMP: type of life in seconds
  ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
  ISAKMP: keylength 128
  ISAKMP (0): atts are not acceptable. Next payload is 3
  ISAKMP (0): audit ISAKMP transform against the policy of priority 20 7
  ISAKMP: encryption AES - CBC
  ISAKMP: hash SHA
  ISAKMP: default group 2
  ISAKMP: preshared auth
  ISAKMP: type of life in seconds
  ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
  ISAKMP: keylength 128
  ISAKMP (0): atts are not acceptable. Next payload is 3
  ISAKMP (0): audit ISAKMP transform 8 against priority policy 20
  ISAKMP: encryption AES - CBC
  ISAKMP: MD5 hash
  ISAKMP: default group 2
  ISAKMP: preshared auth
  ISAKMP: type of life in seconds
  ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
  ISAKMP: keylength 128
  ISAKMP (0): atts are not acceptable. Next payload is 3
  ISAKMP (0): audit ISAKMP transform 9 against priority policy 20
  ISAKMP: 3DES-CBC encryption
  ISAKMP: hash SHA
  ISAKMP: default group 2
  ISAKMP: long-acting prior auth (init)
  ISAKMP: type of life in seconds
  ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
  ISAKMP (0): atts are not acceptable.
  crypto_isakmp_process_block:src:src: [cisco vpn client IP here], dest: [cisco pix IP here] spt:64897 TPD:
  500
  ISAKMP: error msg not encrypted
  crypto_isakmp_process_block:src: [cisco vpn client IP here], dest: [cisco pix IP here] spt:64897 TPD:
  500
  ISAKMP: error msg not encrypted
  pixfirewall #.

  ---------------------------------------------------------------------------------------------------------------

  Here is the log of the vpn client:

  363 16:07:58.953 01/07/10 Sev = Info/4 CM / 0 x 63100002
  Start the login process

  364 16:07:58.953 01/07/10 Sev = Info/4 CM / 0 x 63100004
  Establish a secure connection

  365 16:07:58.953 01/07/10 Sev = Info/4 CM / 0 x 63100024
  Attempt to connect with the server '[cisco pix IP here]. "

  366 16:07:58.953 01/07/10 Sev = Info/4 IKE / 0 x 63000001
  From IKE Phase 1 negotiation

  367 16:07:58.969 01/07/10 Sev = Info/4 IKE / 0 x 63000013
  SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) [cisco pix IP here]

  368 16:07:59.078 01/07/10 Sev = Info/4 IPSEC / 0 x 63700008
  IPSec driver started successfully

  369 07/01/10 Sev 16:07:59.078 = Info/4 IPSEC / 0 x 63700014
  Remove all keys

  370 16:08:00.110 01/07/10 Sev = Info/4 IKE / 0 x 63000014
  RECEIVING< isakmp="" oak="" ag="" (sa,="" vid(xauth),="" vid(dpd),="" vid(unity),="" vid(?),="" ke,="" id,="" non,="" hash)="" from="" [cisco="" pix="" ip="">

  371 16:08:00.110 01/07/10 Sev = WARNING/3 IKE/0xE3000057
  The HASH payload received cannot be verified

  372 16:08:00.110 01/07/10 Sev = WARNING/2 IKE/0xE300007E
  Failed the hash check... may be configured with password invalid group.

  373 16:08:00.110 01/07/10 Sev = WARNING/2 IKE/0xE300009B
  Impossible to authenticate peers (Navigator: 915)

  374 16:08:00.110 01/07/10 Sev = Info/4 IKE / 0 x 63000013
  SEND to > ISAKMP OAK INFO (NOTIFY: INVALID_HASH_INFO) [cisco pix IP here]

  375 16:08:00.110 01/07/10 Sev = Info/4 IKE / 0 x 63000013
  SEND to > ISAKMP OAK INFO (NOTIFY: AUTH_FAILED) [cisco pix IP here]

  376 16:08:00.110 01/07/10 Sev = WARNING/2 IKE/0xE30000A7
  SW unexpected error during the processing of negotiator aggressive Mode:(Navigator:2263)

  377 16:08:00.110 01/07/10 Sev = Info/4 IKE / 0 x 63000017
  Marking of IKE SA delete (I_Cookie = A152D516B07D9659 R_Cookie = 5F4B55C38C0A40F4) reason = DEL_REASON_IKE_NEG_FAILED

  378 16:08:01.078 01/07/10 Sev = Info/4 IKE/0x6300004B
  IKE negotiation to throw HIS (I_Cookie = A152D516B07D9659 R_Cookie = 5F4B55C38C0A40F4) reason = DEL_REASON_IKE_NEG_FAILED

  379 16:08:01.078 01/07/10 Sev = Info/4 CM / 0 x 63100014
  Could not establish the Phase 1 SA with the server "[cisco pix IP here]" due to the "DEL_REASON_IKE_NEG_FAILED".

  380 16:08:01.078 01/07/10 Sev = Info/4 IKE / 0 x 63000001
  Signal received IKE to complete the VPN connection

  381 16:08:01.078 01/07/10 Sev = Info/4 IPSEC / 0 x 63700014
  Remove all keys

  382 16:08:01.078 01/07/10 Sev = Info/4 IPSEC / 0 x 63700014
  Remove all keys

  383 16:08:01.078 01/07/10 Sev = Info/4 IPSEC / 0 x 63700014
  Remove all keys

  384 16:08:01.078 01/07/10 Sev = Info/4 IPSEC/0x6370000A
  IPSec driver successfully stopped

  Mmmm... What version of vpn client do you use?

  If you use the last being, it looks like you might have it downgrade to a version older than the version of your PIX is old enough.

• Need help with permissions of folder in Server 2008 r2

  I have a windows domain and use roaming profiles for our students.

  Student profiles server is a 2008 r2 box.  I have a folder created on the root of drive called profiles, and the permissions are set as follows:
  inheritance is turned off
  Tech - total control (no matter who in the Technology Department)
  teachers - full control (all teachers have access to all the files of the student)
  control system - total
  domain user - of special permissions (this was defined by windows not me)
  inside this folder, I have 2 folders.  one called data and one called roam.  Each of these files has turned on inheritance and the show the same permissions as the folder parent.  Inside the data folder is where each student has a folder (named by ID) with their my documents folder, desktop etc folder.  the roaming folder also contains student folders (named by id) that contains the appDat file and the ntuser.dat etc files (everything is copied to the local computer when connecting)
  Folders that are created inside these files are supposed to get all the permissions of the parent folder but also give the student change your permission on the folder and its contents.
  I recently renamed the homelessness file and created a new folder of homelessness as described above.  student records begin to be created inside however, some of them have the correct permission settings, some list only the student and administrator (inheritance is disabled) and some are created where I have no access to the folder at all until I have take ownership of the file, after which the administrator is the only user with permissions for the folder and the contents.
  I have 6000 student accounts.  Is it possible to write a vb script that would change the permissions on these folders at once instead of changing each one individually.
  What I need, is to ask the administrator appropriating all the files and folders, and then change the properties of legacy on all files and folders, add the student to their folder with change permission, and change the owner of every folder and contents back to the ID of the folder name.
  Any help would be GREATLY appreciated!  In the end, I'd be delighted if records were created just correctly and does not need to do anything.  It worked very well under windows XP, but since we moved to windows 7, it has been a nightmare!  I got a box to open with Microsoft and that they could not obtain records to create with the correct permissions and the case was closed after 2 weeks or try different things.  The idea of scenario is mine, but I don't know where to start to create.

  I have a windows domain and use roaming profiles for our students.

  Student profiles server is a 2008 r2 box.  I have a folder created on the root of drive called profiles, and the permissions are set as follows:
  inheritance is turned off
  Tech - total control (no matter who in the Technology Department)
  teachers - full control (all teachers have access to all the files of the student)
  control system - total
  domain user - of special permissions (this was defined by windows not me)
  inside this folder, I have 2 folders.  one called data and one called roam.  Each of these files has turned on inheritance and the show the same permissions as the folder parent.  Inside the data folder is where each student has a folder (named by ID) with their my documents folder, desktop etc folder.  the roaming folder also contains student folders (named by id) that contains the appDat file and the ntuser.dat etc files (everything is copied to the local computer when connecting)
  Folders that are created inside these files are supposed to get all the permissions of the parent folder but also give the student change your permission on the folder and its contents.
  I recently renamed the homelessness file and created a new folder of homelessness as described above.  student records begin to be created inside however, some of them have the correct permission settings, some list only the student and administrator (inheritance is disabled) and some are created where I have no access to the folder at all until I have take ownership of the file, after which the administrator is the only user with permissions for the folder and the contents.
  I have 6000 student accounts.  Is it possible to write a vb script that would change the permissions on these folders at once instead of changing each one individually.
  What I need, is to ask the administrator appropriating all the files and folders, and then change the properties of legacy on all files and folders, add the student to their folder with change permission, and change the owner of every folder and contents back to the ID of the folder name.
  Any help would be GREATLY appreciated!  In the end, I'd be delighted if records were created just correctly and does not need to do anything.  It worked very well under windows XP, but since we moved to windows 7, it has been a nightmare!  I got a box to open with Microsoft and that they could not obtain records to create with the correct permissions and the case was closed after 2 weeks or try different things.  The idea of scenario is mine, but I don't know where to start to create.

  Wrong forum.  TechNet.
   
  And Yes - many ways to do what you want.  VBScript would work.  PowerShell.  Probably still a command script could do.

• Need help with attention not approved VPN server certificates.

  I've been on the many other posts about it, and they all seem a bit different, so I started my own thread.

  I was sent to my users via the ASA AnyConnect 3.1.02026, and we all get the warning of the Cert of untrusted when connecting VPN server.

  When the ASA deploys the client, it puts the external IP of the SAA as the host name, which causes the error.

  So I have two questions: 1. How can I get the ASA to make host name "vpn.cfo.com" when a user installs the client and 2. How can I change my cert so that it does not show the internal name of the ASA and use 'vpn.cfo.com' instead?

  Here are all the news that everyone should not (I) help to think

  SSL-trust ASDM_TrustPoint0 OUTSIDE_PRIMARY point

  Certificate

  Status: available

  Of the certificate number:

  Use of certificates: Signature

  Public key type: RSA (1024 bits)

  Signature algorithm: SHA1 with RSA encryption

  Name of the issuer:

  hostname = ambossfw01.cfopub .net

  CN = ambossfw01

  Name of the object:

  hostname = ambossfw01.cfopub .net

  CN = ambossfw01

  Validity date:

  start date: 15:17:42 EDT June 2, 2011

  end date: 15:17:42 EDT May 30, 2021

  Trustpoints Associates: ASDM_TrustPoint0

  CA

  Status: available

  Of the certificate number:

  Certificate use: general use

  Public Key Type: RSA (2048 bits)

  Signature algorithm: SHA1 with RSA encryption

  Name of the issuer:

  CN = VeriSign Class 3 Public Primary Certification Authority - G5

  or = (c) 2006 VeriSign\, Inc. - authorized only use

  OU = VeriSign Trust Network

  o = VeriSign\, Inc.

  c = US

  Name of the object:

  CN = VeriSign Class 3 Secure Server CA - G3

  OU = terms of use at https://www.verisign.com/rpa (c) 10

  OU = VeriSign Trust Network

  o = VeriSign\, Inc.

  c = US

  OCSP AIA:

  URL: http://ocsp.verisign.com

  CRL Distribution points:

  [1] http://crl.verisign.com/pca3-g5.crl

  Validity date:

  start date: 19:00:00 EST February 7, 2010

  end date: 18:59:59 EST February 7, 2020

  Trustpoints Associates: _SmartCallHome_ServerCA

  Any help would be greatly appreciated.

  Hello

  Cisco has made a strict checking of KU and EKU in recent versions of AnyConnect, which leads to the warning you got.

  To my knowledge, if you go to 3.1.00495, you will not get this warning, if not, you need to get the valid KU and EKU fields in your certificate of ASA.

  To use specific trustpoint, please check the 'truspoint ssl' command in global configuration mode.

  Mashal

• I need help with this error on VMware Server 2

  Hello world!  I'm new to using this site, but not to a large part by using VMware, VMware Server software. I have worked with it for 1.0.5 version. I have a Dell 2950 PowerEdge Server with Red Hat 5.2 and VMware Server 2. I installed 3 virtual machines and I made a backup of any of it. I copied this entire virtual machine to another computer (Dell Optiplex 755) with the same Red Hat 5.2 and VMware Server 2 and I added the virtual machine properly in the inventory of machines with VMWare Server 2 recognized the very fast machine. But when I press Play to start the virtual machine I got the error that appears on the image and I don't know what can be the problem.

  Can someone help me please?

  Thank you very much!

  William Anderson

  It looks like may have copied the files when the virtual machine is not correctly - stop search *.lck files/folders in the destination folder and delete them. Also, make sure that the account running the VMware process has permissions to write to the files/folders.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• I keep hearing in the background ads. Need help with a few good Adware/Malware removers please.

  I tried Microsoft Essentials and Microsoft Security Scanner.  I tried on WIndows Defender, but I can not turn on, so I can run the software.  Initially, I had run SSM, and he had said that I had some Adware on my PC and he had kidnapped, but yet I still see ads in my headphones.  I reinstalled my Windows and fixed my start-up problems so that comes to be just in case anyone is curious.  Any help would be greatly appreciated, thanks guys and girls!

  Thank you, Tommy, I used this link http://support.kaspersky.com/5350?el=88446 that John had already posted.  I ran, and he immediately found the bat.  Corrected the issue and no problem now.  Thanks again John! If I end up finding more problems persitant I also give these steps to try.  Thanks again you two for help!

• Need help with Creative Cloud Desktop.

  Creative cloud Office works, but it does not what anyone (downloading applications, update, etc.), except for the control menu. Already tried to uninstall, reinstall and Adobe cleaner.

  Thanks Thelinari.  Please try solution 2 implementation in desktop applications lists CC as "up to date" when the no facility not - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

• Need help with a few JS Bumpbox 2.0 installation

  I am trying to add a lightbox effect to PDF on my site, I found a Javascript plugin to http://www.Artviper.NET/Bumpbox-demo/index.html that looks like it should do the trick, but I can't make it work.

  To narrow the problem that I created a test.html file I pasted to the root of the folder I downloaded on their site (so I'm working locally on my desk at this time)

  My code is as follows... I feel I'm missing something super obvious, everyone see? (I have to define the .bump class in the css file?)

  Thank you in advance for him very needed help!

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > Untitled Document < /title >

  < / head >

  < body >

  " < a href =" http://www.Artviper.NET/test.PDF "class =" bump"rel =" "800-350 > PDF file & raquo; < /a > < br / >

  < script type = "text/javascript" src = "js/mootools.js" > < / script >

  "< script type =" text/javascript"src="js/bumpbox-2.0.1.js "> < / script >

  < script type = "text/javascript" > doBump (".bump", 750, 500, ' 111 ', ' 900', ' 0.8 ', 5, 1, '333', 15, '000', 4)

  Fx.Transitions.Bounce.EaseOut,

  Fx.Transitions.Bounce.EaseOut,

  "images/demo_bg_bumpbox.png,"

  "top-left",

  "repeat-x"); < /script >

  < / body >

  < / html >

  These paths do not work because they point to the files on your local hard drive.

  Work within a well-defined local site?

  You save these javascript files in the js folder in the root of your local site?

  Correct path to the scripts for this test page should look like this:

  PS. do not add spaces in file or folder names.  It can create problems for the web files.

  Nancy O.

• OIM11g R2 PS2 Installation - problem to the IOM configuration step

  Hello

  I install OIM11gR2 PS2 to computer virtual RHEL5.4 installation. And I followed the steps of fixation with success. And now the configuration step IOM after making the field WL creation and facts Admin Server and running upward.

  In Assistant de Configuration IOM, step 4: screen of the WebLogic Admin Server.

  I have entered the following values:

  URL of the WebLogic Admin Server: t3: / / < xxxx >: 7001

  Username: weblogic

  Password: xxxxxx

  After you click Next, it is not further.and of the Forum got stuck at step 4 for more than an hour. I tried several times but the same problem persists.

  Could someone please help me out here.

  Enjoy a quick help.

  Thank you

  Maryse

  I think that your SOA server is not upward. Early SOA server and then click Next. Make sure that before you run the Configure Server Admin and SOA are rising.

  Kind regards

  ARI

• With WAN Miniport problem when you configure the VPN in Windows 7 server

  I tried to make my computer a VPN server by establishing a "new incoming connection" under connections in the network and sharing Center. Originally, she she started but showed no WAN Miniport connections. I could not connect to this VPN with my other computer.

  What I've done so far:

  • I have 'upgrade' all WAN Miniports in 'MAC Bridge miniport driver' Device Manager (since I couldn't uninstall them as they were) and then uninstall all WAN miniports. I restarted my computer and then I tried the device drivers to install automatically, but only a few installed successfully.
  • Then, I downloaded the latest WDK (8.1) and tried to reinstall all Miniports WAN via devcon.exe with the command "devcon.exe install c:\windows\inf\netrasa.inf MS_PptpMiniport. He says that the node has been created, but it could not install the drivers. I restarted my computer, but some of these minis ports appeared as 'Unknown' in Device Manager, while others appeared with their names but with numbers attached because I tried a few times, Ex: "Miniport network EXTENDED (IP) #3".»

  from my understanding, I need at least WAN Miniport pptp to work for VPN to work. I don't know what to do at this point. Any help is greatly appreciated. Thanks in advance.

  Gateway DX4822-01 desktop PC

  Windows 7 64-bit, SP1

  Hello Jdrumr,

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Need help with the configuration of the AAA

  I try to configure AAA on my network devices. I use GANYMEDE + with an ACS (3.2) server. I have groups of users of installation against two in the ACS, 1 voice server and allow privileges and the other without. I am able to get the AAA configuration to work when telnet in devices. However, when you connect in the port of the console, the user with privileges to activate Group do not go directly in the activation of the mode as do the users of telnetted. How to solve this problem?

  Hello

  You should not use the following command: -.

  authorization AAA console

  This command will not be displayed on the help.

  Kind regards

  Vivek

• Help with a problem of Wireless Desktop 800, thank you.

  I have a desktop wireless 800, recently, the keyboard is showing strange behavior as follows;
  1. the left arrow button weighs almost all the time, especially when you try to select text (for example, in word) using Ctrl + Shift + arrow to the left.
  2. the green control led lights when the keyboard is touched against the work surface or slightly harder than usual key and the keyboard stops responding for a few seconds until the light turns off.

  Seriously, I would not have taken the trouble you with this kind of a questions unless it is very annoying because all my work is related to Microsoft word and excel, and I really wanted the entire web for a sufficient answer, but in vain. Hope you can help me. Your time and efforts are deeply appreciated, thank you in advance for your help.

  Dr. Ahmed

  Hello

  To help you better, please answer these questions.

  1. have you tried to use the keyboard on the other computer?

  2 did you do changes on the computer before the show?

  Based on the description of your problem, it seems that the problem is related to hardware. Since you mentioned that you have recently purchased Microsoft Wireless Desktop 800, I suggest you to contact the Microsoft Hardware support for assistance.

  http://www.Microsoft.com/hardware/en-in/support

  However, you can read these articles Microsoft and check if it helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• Windows Server configured as the gateway crashes with referee interface

  I'm running the Active Directory to Windows 2008 R2 servers multiple infrastructure test lab. One of the functions as a gateway server, configured with routing and remote access. Each time, after a few hours, the network to public internet traffic stops. One way to solve is, is to restart the gateway server. When network stops, same gateway itself cannot connect to the public network, the DNS servers of the ISP ping with the IP addresses is answer. Ipconfig/release and / renew buy do a thing and disabling WAN network interface freezes. After that, try to stop and restart the server will be fallow with blue screen and cold reboot.

  WAN interface uses the pilot VMNET3 and Intel LAN interface 1000 (something like that). VMtools has been installed from the console of the last version of ESXi.

  Familiar with this problem to anyone?

  Try to change the external NETWORK adapter to E1000.

  ---

  MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• Need help with configuration on cisco vpn client settings 1941

  Hey all,.

  I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

  If anyone can help with orders?

  I need the installation:

  user names, authentication group etc.

  Thank you!

  Take a peek inside has the below examples of config - everything you need: -.

  http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

  HTH >

  Andrew.