"Hibernate" or "stick to" mode hangs during recovery - Tecra M1

Similar Questions

• Clean Windows 7 install hangs during expanding windows files

  well, so that's what I've done so far, I have downloaded the kit of the student digital river, I originally ran Windows xp 32-bit, so when I ran first the exe download, it gave me the error of not being able to record in a single folder to read and what not, but I followed the suggestions on the forums to move forward a burn on a startup disk expandedsetup folder in converting it to an iso, which I did, I installed the first time but missed the option to format my hard drive so my old files were still there, however, once got installed win 7 I wasn't able to connect to internet for some strange reason and I couldn't understand it, so I decided to take the 3 files I downloaded originally from digital river and try their unpacking on the 64 bit OS now I had installed, it worked fine this time without any errors, so I moved the folder expandedsetup to my laptop and he burned them on a dvd as before, this time I boot from the dvd and do a clean install, it installs again very well, but once I login in the OS and I am getting started with things once again everything is grinding the long, I tried to restart and it does not work, this time it froze just a black before the paper screen, so once more, I started from the dvd and tried to do a clean install, but this time, he begins to hang during the part of expanding windows files, so I decide to make another disc using the second expandedsetup folder thinking that perhaps a new one was a bad burn, this does not work either, it takes about 14% of full on the extension of the windows files and then he told me that the files is not found, so I tried the second drive once again, we only got 4% until it gives me error on files is not found , so I put the first early in and try and suspension 4% right now and I expect to give me the same error, I have really no idea of happening, there are too many variables, but I tried to evaluate each of them, would be - this related material? my computer is compatible for win 7 64 bit, I ran the Upgrade Advisor before you buy, so I know that my hardware can run it, I think it's my dvd drive or the hard drive, but they both seem to run fine otherwise, any help would be appreciated

  Hello Impoc,

  Thanks for posting on the Community Forums of Microsoft Vista.

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  ·     Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to How to replace Microsoft software or hardware lost, broken or missing on the Microsoft Web site.

  ·     Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  ·     If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  ·     There is a virus on your computer. Run an antivirus program to scan your system and to identify the necessary repairs. Don't forget to disable the antivirus before you start the installation again.

  Also, it is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  1. wait 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  2. If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  3. If you have compatible hardware and your computer still stops responding, disable any unnecessary hardware. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If you have more than 1 Memory stick on your computer, try to remove all but one RAM stick and try to install Windows 7.

  If the computer still stops responding during installation, you may need to contact your computer manufacturer or retailer to check if the computer is compatible with Windows 7.

  Also check out the link below to learn more about solving Windows installation problems:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-installation-problems

  Note: This article is related to Windows Vista. However, you can follow the same steps with Windows 7.

  If the installation fails after following the steps above, try to note the exact error message and provide the same.

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite Pro A10 hangs during the installation of Win XP

  Hi guys,.

  just thouth I would ask why my new laptop will not install XP.
  Only, it crashes during installation. No n' achete purchased on this occasion, had no operating system installed.

  I wonder if it's a driver problem, using my xp disc I bought, but like I said that just, it will hang during installation.
  What I need to intergrate drivers somehow?
  I'm guessing that this is the problem?

  If so, how do I?

  see you soon

  I really wonder that your new laptop is probably produced about 5 years ago. ;)

  In any case, to install WXP use WindowsXP SP1 installations CD (factory settings). If you want to discuss a little more please explain to us what exactly is happening.

• Patch for KB2545850 hangs during installation on Windows Server 2008 R2 Standard 64-bit

  Hello

  I have a server with the issue detailed in KB2545850.  I downloaded the fix Fix370193 (https://support.microsoft.com/en-us/hotfix/kbhotfix?kbnum=2545850&kbln=en-us) and tried to install it but it seems to just hang during installation.

  I tried several times and it fails every time.  No errors are displayed or saved, he's right there with the display of progress bar.  The Cancel button does not cancel.

  Restart the server results it starts successfully and I had to go back to a snapshot.

  I tried to let the software update apply for 16 hours with no luck.  Someone has seen something like this before?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• Hard drive is IDE mode AHCI mode or during installation

  I have a SATA hard drive and I don't know if it has been set to IDE mode AHCI mode or during the installation of Windows XP.  I bought a new motherboard and when I connect it to the hard drive I get the fault of starting system if my hard drive is set to IDE mode as my motherboard is set to AHCI mode.  How will I know if my hard drive is set to IDE or AHCI mode?

  You can read this break new P67 chipset: http://www.pagestart.com/

  Also: http://social.answers.microsoft.com/Forums/en-US/w7install/thread/22704fcf-32db-4ae4-b969-21ba1f40043b

  First thing is to contact ASUS motherboard potential recall.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Statrted of Vista in safe mode and systm recovery restores and no recoverydisk not found?

  Statrted of Vista in safe mode and systm recovery restores and no recoverydisk not found? Sys restore is off and will not turn on and due to safemode noting els / programs will not work. is there a way out?

  Hi Jeff,

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  If you are able to boot into safe mode without any problem, you can try to perform a clean boot and check if it helps.

  Method 1:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  If you are always faced with the question, then you can check if you can start your computer by using the known last good Configuration feature and fix the problem.

  You can read the following article to do the same thing:

  Using the last good known Configuration

  Method 3:

  If the steps above fail, then you must have a full version of Windows Vista disk and try to perform a repair of the boot to WinRE (Windows Recovery Environment) boot from the installation disc.

  If restarting fails, then try to perform a restore of the system to WinRE (Windows Recovery Environment).

  For more information, you can consult the following article:

  What are the system recovery options in Windows Vista?

• laptop G62-b98ED: 0xe0f00013 during recovery (new hard drive) error code

  In the HP Support Forum Iread the code 0xe0f00013 error during recovery (new hard drive).

  In this article, I go the Digital River en download Windows 7 Home site (http://msft.digitalrivercontent.net/win/X17-58997.iso)

  Unfortunately, this link is broken

  ("The Page or file you requested cannot be provided

  The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
  Error HTTP 404 - file or directory not found. »)

  In ths page I be called Micrrosoft to download on their site. After typing the registrationkey it says:

  'Product not supported '.
  The product key you have entered seems to be the software that was preinstalled on a device. Contact the manufacturer of the software device for recovery options. " »

  You have a different link to download the ISO of windows 7 Home Premium?

  I have not personally used this download link, but they seem to have good answers/responses from users it and 33K followers on Facebook.

  http://getintopc.com/softwares/operating-systems/Windows-7-Home-Premium-free-download-ISO-32-bit-64-bit/

• Volume \Device\HarddiskVolumeShad... encountered an error during recovery

  Hi, I got this error in the event viewer:

  The resource transaction on \Device\HarddiskVolumeShad volume manager... has encountered an error during recovery.  The resource manager will continue recovery.

  Only from google, is your error? - http://www.eventid.net/display-eventid-134-source-Ntfs-eventno-10844-phase-1.htm

  If so, backup your data now and then a full disc check error may be trying to see if it finds problems

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  IF you can provide more information, including the number of the event real, are complete you any specific task when the event occurs etc, someone can be able to give more specific advice.

• RMAN recovery failed with the incarnation of target of error 03002,11003 and recovery 19906 changed during recovery

  Hi all

  I was cloning a Prod DB (Oracle 10.2.0.5) from tape backup. So the cloning is going on it failed with the below error in RMAN:

  archive log thread = 2 sequence 23044 = filename=+DG_zeus_FRA_01/zeus/archivelog/2014_05_23/thread_2_seq_23044.3558.848348137

  output channel: ch01

  output channel: ch02

  output channel: ch03

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db in dual at 23/05/2014 20:15:48

  RMAN-03015: an error has occurred in the script stored memory Script

  ORA-00283: cool cancelled due to errors

  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile ' +DG_zeus_FRA_01/zeus/archivelog/2014_05_23/thread_2_seq_23044.3558.84

  8348137'

  ORA-00283: cool cancelled due to errors

  ORA-19906: embodiment of changed during recovery recovery targets

  Any possible solution to the resume and cloning complete successfully?

  Kind regards

  Ritu

  incarnation of the list;

  It listed 2 incarnation. I have reset the previous incarnation

  RESET DATABASE TO INCARNATION 2;

  and recovered again and it solved my problem.

  After that added temp files as usual after failing RMAN duplication;

  After this nest of DB and open reset logs.

• Remove the log during recovery, but everything is ok

  Hello
  
  I delete the log during recovery file, insert a value in a table and commit, it is committed and no error in the alert.log file
  I turn on logfile, it switches, once again no error
  
  What is the reason?
  
  Thank you
  
  John

  But when I commit, where do the Oracle stores data?

  First of all in the log buffer which is empty on commit to the CURRENT redo log in the redo log writer.

  As stated previously the writer newspaper most likely open the file before you delete - so he acquired a file descriptor and is still able to write to this file, even if you subsequently deleted. The journal writer retains the redo log permanently open at least until the file becomes inactive (I think even the file handles are never closed for performance reasons; but this should be verified).

• Satellite L355D-S7825 - hangs during the installation of recovery

  My laptop girls. She asked me to restore the computer to factory settings. It is running Vista Home Premium 32 bit. I tried the restore disks 4 times now to pretty much the same results. It will get all the way to the "application final Configuration where it installs the user manual and the office links and then it's there. After reading several posts here with the same problem, I decided to let it sit all night. This morning it had expired. I clicked on the button of the mouse to wake him up. It passes to the logon screen. It shows login Admin and says that the account has been locked, please contact your system administrator. How can this be? It won't let me! My only choice is to restart the system. After the reboot, it displays the screen of the AFC and reinstalls the two same files manual user and links and then it's there.

  I can minimize the screen of the AFC I did and then I changed the power settings to never expire. I have the WiFi off button as requested by AFC screen, as it will not be installed file links with WiFi turned on and the user manual. I don't know what else to do.

  Anyone has any ideas on this? What would you say if I was totally format the HD and then try to restore? Any help would be appreciated.

  Hi Poppi,

  What you mean with screen AFC?

  Well, if recovery installation doesn't work properly, it s hardware malfunction or the disk recovery...

  You can install Windows from a normal Microsoft drive correctly?

• Equium L300 - 17Q hangs at a black screen during recovery

  Help

  I have an Equim L300 - 17q.
  I'm trying to restore my laptop to default after getting a virus.
  I bought a toshiba recovery disk.
  I followed the instructions after the laptop says it's loading files, it crashes then just at a black screen.

  Ideas please

  Hello

  Have you tried to install the OS using another drive or maybe you could start Notepad using a Live CD Linux Live CD or WinPE or PartBE?

  Please check because your problem could be related to the laptop computer part faulty (maybe the HARD drive) or defective recovery disc.

  Now it s not possible to say what could cause this and, therefore, you should try starting with other disks.

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M

• 0x0000009F during recovery mode sleep on ASUS K53SD

  Hello, I have a BSOD problem when you exit sleep / but I was unable to find the driver causing, when I look at the discharge, it tells me that the problem is ntoskrnl.exe.

  I installed the patches associated with error 0x0000009F unsuccessfully with the thesis.

  Windows6. 1 - KB975599 - x 64

  Windows6. 1 - KB977186 - x 64

  Windows6. 1 - KB981848 - x 64

  Windows6. 1 - KB2459268 - x 64

  The drivers used currently in the dump on link below.

  http://1drv.Ms/1ogeuHt

  Concerning

  Hello

  The attached file of the DMP is to bug checking DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  By default, the fault of the accident is pci.sys which is NOT the real cause of the accident. If we run one! IRP on the 4th parameter of the verification of bug:

  > [16, 2] fffffa8007ace050 0 0 00000000 00000000 - 00000000
  Failed to load image \SystemRoot\system32\DRIVERS\NETwNs64.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for NETwNs64.sys
  ERROR: Module load completed but symbols can be loaded for NETwNs64.sys
  \Driver\NETwNs64

  NETwNs64.sys is the Intel (r) Wireless WiFi Link 5000 Series adapter driver for Windows 7.

  Make sure that this driver is 100% up-to-date.

  -------------------------

  Remove and replace Kaspersky with Microsoft Security Essentials to temporary troubleshooting purposes, since it's likely also cause conflicts of NETBIOS:

  Kaspersky - remove http://support.Kaspersky.com/common/service.aspx?El=1464

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  Kind regards

  Patrick