Equium L300 - 17Q hangs at a black screen during recovery

Similar Questions

• Equium L300 - 17Q - "Enter" button does not

  As read you on the title my TOSHIBA EQUIUM L300 - 17Q enter button does not.

  screen-on the built-in keyboard works is that all the other keys work.
  I have reinstalled the keyboard from the device manager driver, then perform full system recovery and still does not.

  Hello

  It looks like a malfunction of the simple keyboard in this case, you will need to replace the internal keyboard. Otherwise, you can use the USB keyboard

• Equium L300 - 17Q does not not fullscreen in games

  I just bought a Toshiba Equium L300 - 17Q and I just saw that absolutely no game does run mode full screen.
  There the video card Intel, latest drivers, but nothing.

  He is already in full screen (no border).
  I open this thread simply because others have the same problem and I really want to know who is to blame.

  Do you really have the same problem on all games?

  In your case I update the version of DirectX to the latest, be sure that you have all Service Pack and hotfixes installed and update your BIOS.
  Visit the Microsoft update Web site.

  The version of the BIOS, you can check on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

• Equium L300 - 17Q restore settings factory

  I had problems with my Equium L300 - 17Q for some time. I would like to restore it back to factory settings.

  I did and gestures of the research and I'm lead to believe that the C.Ds came with it, the data necessary to restore are already preloaded, please can someone give me help?

  I tried to do the shoot it out, press and hold 0 then turning it on the thing. It won't work. without error box comes, just "Windows could not stop properly, you want to start windows in safe mode or normally.

  Please help have tried to fix this overnight.

  Hello

  Have you done as described here:

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  If does not help you, you can order:

  https://backupmedia.Toshiba.EU/landing.aspx

  or copy of Windows Installer and the drivers yourself.

• IdeaPad 500 - a black screen during Normal labor

  IdeaPad 500 - a black screen during Normal labor

  My 500 Ideapad is a month old. After a few days with her, I saw that in the middle of my normal work (Word, Excel, ETC...) My screen turn Black and will never go back. Only with the black screen reboot goes normal again.

  What should I do here?

  Thank you

  In response to the reports of customer displays or screens turning off on Lenovo while in use systems and works on battery, Lenovo released a solution via the Intel Management Engine Firmware update, v.11.0.0.1176.

  The Intel Firmware has been approved for the following models:

  • IdeaPad 300 s-14ISK, 500-14ISK ideapad
  
  
  • Lenovo Edge-2-1580
  
  
  • Lenovo, Flex 3-1480, Flex 3-1580,
  
  
  • 500-14ISK, 500-15ISK Yoga Yoga

  Firmware Intel ME can be downloaded here: http://support.lenovo.com/us/en/downloads/ds105001

  If the solution provided by Lenovo does not resolve the problem for you, other customers report that a workaround solution provided by the MattDN93 client also solves the problem. More information on workaround can be found here: https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Flex-3-screen-turns-off-when-working-on...

  Thank you

• Get a black screen during the Installation of Windows 8

  Original title: BLACK SCREEN

  OK, I tried 5 times to install windows 8 by using the downloaded Update widows Pro

  I've updated the BIOS and other drivers and the only issue is to use the upgrade wizard is UEFI is not compatiable that shouldn't be a problem anyway
  So here's the BLACK SCREEN problem, I get all along to install past loan, after adjustment of the apparatus, after preparation, all the way to the end and then it gives just black screen until I power it turns off or reset and says windows 8 could not restore windows I get no error code or any hint of why there not everyone had an idea Yes stay with windows 7 is an excellent option, but I would try and brand and make informed decisions.
  I have internet search and it seems to be a common problem for many different reasons - ideas - Ive tried more things ive read without success. Help please

  Hello Kiwivic,

  Thank you for the question!

  I'm sorry to know that have problems you with the Installation of Windows 8. As I understand it, you get a black screen during the Installation of Windows 8.

  I need to ask you some questions to help you best.

  1. What is the brand and model of the computer?

  2 are the external devices connected to the computer?

  Method 1: disconnect any external devices (except keyboard and mouse) and then install Windows 8 and check.

  Method 2: Select the edge device devices in device/integrated graphic of BIOS (Basic Input output device) and check.

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Meet us if you encounter any problems with the black screen or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Equium L300 - 17Q (PSLB2E) recovery

  Hi all. I'm trying to 'fix' L300 my brother-in-law. It does not start in windows, I tried the safe mode, the repair option, all what I can in the start menu. It hangs, resets or is just a black screen with the pointer. I don't know what the cause is probably a virus. In any case, I want to just factory reset this shit, but I believe that it comes with no recovery media. Thank you Toshiba, nice cost-saving measure that wells of your customers. I guess its his own lack of being too pc-illiterate to do his own recovery disk, but in any case, can someone tell me how I can get hold of a recovery dvd for this model, the cheaper the better! So far, I tried a google search and come with zippo.

  Help! Please? :)

  I think that you would save it £30, if you read first the manual preinstalled on your laptop.
  You will find an info that it s is strongly recommended to create a recovery disk using the preinstalled ;) Toshiba Recovery disc creator

• Force wireless on Equium L300 - 17Q issue

  Since late 2008, I have this Equium L300 BRAND / 17Q. Since my laptop wireless resistance lower then any other pc. I'm even so close to the wireless router, but it is still 3-4 bars.
  I'm the only person at home using modem router
  My OS is Win 7 Ultimate 64 bit, installed license. All drivers up to date.

  Also why Toshiba does not provide any what BIOS more updated for this model.
  The latest version of the bios dated 2008, another way 3 years ago.
  Is the authorized Toshiba read these forums?

  They need develop a newer bios.

  If there is no reason why offer the new BIOS? Do you really think THAT BIOS is a magic bullet for every hardware problem?

  The old model works well with Vista and Win7 perfectly. A few months ago, I installed Win7 32 bit on friends L300. No problem at all. One thing was embarrassing for me, and it's HARD drive.

  OK I've updated HARD drive with more capacity and it was pretty hot so I put aluminum foil in order to reduce the temperature on the plastic cover.

  We tested the WLAN functionality also and everything was OK. If you use the WLAN without problem I think there is no reason to panic. Have you checked all the WLAN settings on your laptop?

• Satellite L300 PSLB8A display, only a black screen

  Hi guys

  Please help if you can; This morning I turned on my laptop (Satellite L300 PSLB8A-04R004 running Vista family) and all I get is a black screen.

  I tried removing the battery and turn on while plaugged in the power supply, same black screen.

  I tried to remove the battery then replace after 10 minutes, but the same black screen. All the power lights are on (but non-corps House).

  I tried everything suggested in support on the site page, but thought that you guys might have the answer?

  Thank you.

  > I have tried everything proposed in the support on the site page, but thought that you guys might have the answer?
  Seems that you have already tried a workaround solution that I would recommend.
  Disconnect the power adapter, remove the battery, wait 1 hour or more.
  Reconnect the two parts and then try to switch on the appliance.

  If that does not help, then you might try to start the device using a single module of RAM.
  Maybe it's a question of s a RAM...

  Otherwise it s necessary to test the material parts and run diagnostic checks.
  This can be done by a Toshiba ASP.

• Satellite L300 - 17l - no HARD drive & black screen when trying to install XP

  I just bought a Toshiba Satellite L300 - 17l no operating system on it.
  I tried to install xp, but after the initialization of the installation was told he not found any hard... and press F3 to exit Setup.

  And now I can not install anything, because when I turn on the laptop it seems just a black screen

  :( NEED HELP... PLEASE...

  All you need to do is install XP that contains SATA drivers. The XP you are trying to install does not contain them is why it does not recognize your hard drive. If you can't find Xp with SATA drivers, you can create your own drive to install XP with SATA drivers in a few steps:

  (1) download nLite
  (2) download the SATA drivers for your laptop from the Toshiba site
  (3) find Xp installation (normal that you use for your PC)
  (4) start nLite and it will tell you how tointegrate the SATA drivers in the XP installation
  (5) burn the installtion disk
  Install XP on the laptop to 6)

• Windows fails to load. That it recharges on normal startup. Hangs on a black screen with a cursor in repair mode.

  I was in my class and hit the computer on the desk. I turned it and then turn it on again now, this problem occurs. It's a Toshiba, and Toshiba normal screen comes up and takes me to the screen "windows failed to load. When I choose to start windows normally, it hangs on the Green loading bar before you restart thereafter. I have it on the repair of the system right now, but he is suspended on a black screen with a cursor and nothing else.

  Hello

  Since then, he has been the "Crash test" the help of a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or the system manufacturer support is probably needed. The underlying problem is probably
  material and it is doubtful that all the efforts of software will work even if it is remotely possible.

  The problem may come from the damage or corruption of the hard drive for the next message will be directly related to
  This question.

  --------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to upgrade the Equium L300 - 17Q to make it better

  I recently got an Equium L300 17 Q.
  What improvements could do for that laptop work the best it can.

  What is the more memory (live RAM) can I put in it?

  Also, what is a good graphics card I could use because I love the game!

  Please answer as soon as possible
  Thank you!

  Hello

  You can't spend a lot of things.
  What you can do is upgrade the memory and the HARD drive. But as much HARD drive will not improve the performance of laptop computers, but only the HARD drive space.

  The RAM can be upgraded up to 2 GB.

  The GPU (graphics card) can not be upgraded, because it fixed s (welded) on the motherboard.

  Best regards

• Need of recovery for Equium L300 - 17Q DVD

  Does anyone have the DVD of recovery for Toshiba Equium L300?
  Specifications: 1024 MB DDR RAM (667 MHz) - capacity HARD disk: 160 GB

  If you have, can you share with me I can pay the shipping and return it to you?

  Location: Ireland/Shannon
  Co.Clare
  [email protected]

  Hey Buddy,

  You can find maybe someone who has the recovery disk you're looking for, but if not you can order such a drive of Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  It s not so expensive, I know it cost about 30 euros ;)

• Windows hangs at a black screen

  Hello

  I have a problem with my laptop as constabtly to a black screen, it blocks & the only way out is to power off the coast. He had a reformat & install but it still makes.

  Any ideas on what is wrong and how to fix it?

  Go to the website of the manufacturer of your laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L300D: black screen during boot - stuck on classpnp.sys & repair

  Hi I have 3 year old Toshiba L300D.
  1 year back I upgraded vista to windows 7 Home premium.

  3 days back I had problem - my windows start page was hanged and was not forward, also all types of safe mode was stuck on classpnp.sys.

  After reading many forums, I started with USB (with windows 7) and use command prompt and all 'pcmcia' realted deleted files from drive C. Now using function F8

  I can't use any option (all the safe mode option, low resolution, restarting, etc. doesn't work, even in the Bios configuration changes will not work). Also now start my PC with USB, after the start of the windows black screen page appears with the white arrow and it will not go further this black screen so I can't even use now guest & installation option.

  Now, I don't know what to do :(
  Any help will be appreciated :)

  Hello

  The classpnp.sys seems to belong to «service Plug & Play of Windows 7»
  Connect USB devices to the laptop?
  Try to start the unit without the connected USB devices.

  In the worst case, you have to reinstall the OS using the recovery disk if F8 and all other Repair Options would not work.
  But in my view inevitable painful s