HIS 60 dead after trying to update BIOS

Similar Questions

• Dynabook G9: Changed Toshiba start screen after trying to update BIOS

  Good day, everyone!

  It is not a problem, but I would like to know how it could happen so I a "Dynabook G9" laptop that was purchased from the Japan. It's like satellite 5200 series... When I turned it on, the logo "DYNABOOK" displayed and computer kept loading... a few days ago, I have tried to update the BIOS but downloaded the Russian from Toshiba Web site for 5200 series update... cause there is no BIOS update on the Japanese site...

  When I run the downloaded file, it says I have BIOS v 1.40 and it can not be updated v 1.50 because it isn't for my laptop... so my idea to use the update for European laptops did not work... but the question is that now I have "in touch with tomorrow Toshiba" logo instead of "DYNABOOK" and how it could happen? And how can I get it back?

  Computer still works fine... but... I do not know... I like just the "DYNABOOK" logo more :-)

  P.S. maybe it changed not after trying to update the BIOS (I'm not really sure) but it has certainly changed.

  I already wrote something in the other topic and because of that I just want to say hi again ;)

  Dear Andrey problem is that Toshiba does not portable as produced big world and there are several global areas: U.S. market area EMEA (Europe-Middle East-Africa) and also in Asia. I am not sure if the Japan is separately but I think it is.

  Also books produced in all areas are suitable for each other. Because of this, you cannot mix BIOS and Toshiba has designed tools and utilities. I think that in most cases, it can work, but it is not for sure. Support page for notebook EMEA, it is recommended to use the BIOS and other stuff explicitly of Toshiba Europe. For US books there are all the drivers, tools and utilities on the Toshiba U.S. support page.

  Now, you have Japanese laptop and use non - Japanese BIOS or software. For me, it makes sense that some changes will happen. I don't think anyone has good experiences with it, but you should be happy that your laptop works well.

  All that s what I can say about it.

  In any case, good luck and have fun with your toys!

• Satellite P200-1 has 2 dead after trying to update the Bios

  Hello

  I downloaded the latest version of the BIOS firmware of Toshibas site (European site). I checked it clearly with the model nr and serial nr. I went on the northern site to update bios and downloaded the latest drivers and BIOS.

  My laptop Satellite P200-1 has 2 and the nr series is PSPB6E-02J023N5. Toshibas site, I downloaded all the drivers needed and bios. I started with the installation of the BIOS, when I tried to install it, then my pc froze.

  My food was on.
  The fan went beserk everything and the screen froze.
  I tried to let it run for 30 minutes, because I was afraid to interrupt the installation. I couldn't wait anymore, so I turned off the pc by removing the battery and power.

  When I then tried to turn on the laptop, nothing happens. All black screen.

  Can anyone help? I used the correct BIOS driver of Toshiba's own home page, but apparently it didn't work. How do I restore the BIOS? I don't know what BIOS I use.

  What I've done so far is:

  1. use HP USB Disk Storage Format Tool with MiniDOS files to make your Flash Bootable drive: USB
  2 copy all the files from backup for your: USB key
  3 rename your BIOS to bios.wph file and copy it in your: USB stick. I downloaded the same BIOS firmware and downloaded as EXE file, I extracted the exe file and found a file called. ROM and I renamed the entire file in bios.wph
  4. remove the battery, unplug the computer from power.
  5. hold: Fn + B, then all in now the computer in power (do not connect the battery) and close the power button.

  But after that, nothing happens.

  I'm afraid that something was wrong during the update of the BIOS of m.
  It seems that your ROM module, where are stored the BIOS was not flashed properly.

  I guess you checked this thread because the procedure described is her even that you posted your message.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395

  However, maybe you should try the procedure using the floppy and disk crisis described in the other thread.

  If this is not enough, your final option is the Toshiba service partner.

• Z3 dead after trying to update

  I tried to update my Z3 this afternoon, downloaded the PC companion and the update. I plugged my phone as instructed and he started to update. Companion PC came with a notification that there no internet connection, although there was that the loading of web pages were normally. I clicked retry on the pop up box, but nothing helped. Companion PC rebooted and my phone will be the first Sony Xperia black page on start up and stop there.

  The phone will not let me turn off just power button, I need to hold the power button / stop and the volume to be able to descend. When the screen Sony, PC companion doesn't detect the phone, saying no phone/Tablet not connected. When I turn off the phone using the power + flight buttons, PC companion then recognizes the phone, I try to go to software update of the phone, a screen will appear asking how to connect, I press ok and the screen doesn't go away, when I press cancel it brings back me to the PC companion selection screen. After a minute of phone being turned off and plugged into the USB port, the phone lights, displays the black start to the Sony Xperia screen and stays there. Then companion PC does not recognize the phone.

  Please help, its driving me crazy

  @Bennyfromtheblock, for me, it looks like you connect the phone too early. When you perform a repair of software you should not the phone until the PC Companion shows you how to connect it.

  Follow these steps: force a shutdown of the device (WE / OFF + programmable volume for 5-10 seconds) > without connecting the phone, press "Start" on the support area > press 'Start' of phone / Tablet Software Update > now, you will get a message that says "could not find phone / tablet" > in this message, you have to press the blue clickable link "fix my phone / tablet" > you will start a step by step guide that takes your grace to repair and This guide will also tell you when and how to do to connect the phone.

  @Tanke_MD, you have an internet connection all the time when you try to repair or update the phone? You must have an internet connection through any update/repair process. If you do, you use a Proxy or similar for your connection? Or maybe you have a firewall/antivirus which blocks PC Companion.

• Tecra S11 BSOD after trying to install BIOS v3.1

  Tecra S11 BSOD after trying to install BIOS v3.1

  I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
  Win 7 pro
  Where can I find the minidump to see what file that are the problem?

  C/windows/minidump folder is empty.

  Hello

  Do you get the BSOD during the BIOS update procedure?
  Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

  If you have installed your system, then you should check that the VAP is installed as well.

  Also, I found this info about the update to the BIOS:

  + Attention! +

  + Please close all applications before running the update. +

  + At the end of this process, the computer will be restarted in order to update the EC. +
  + While updating the CE, the screen will not appear and the power LED etc can blink. +
  + The computer may restart several times. There is no abnormal behavior. +
  + Please wait until the computer is restarted fully. +

• Network controller on the laptop missing after trying to update some drivers.

  Hello.

  I tried to update some drivers on my laptop and now the network controller is missing on the laptop and I don't have Wi - Fi on it, connect network cable to be able to access the internet. try to get windows to locate it online but can't find it. any where I can get the driver would be great help thank you.

  I have a HP dv6-1130TX

  Rushbiee

  Have you tried the drivers on your Support page?

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3938855&cc=us&DLC=en&lang=en&LC=en&query=DV6-1130TX&tool=

• Blue screen after trying to update Windows Vista

  Hello

  I get a blue error screen when I tried to update my computer. The description of problems when the computer turns on is...

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: 24

  BCP1: 00000000001904AA

  BCP2: FFFFFA6008460D58

  BCP3: FFFFFA6008460730

  BCP4: FFFFF80002CEBEFD

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  I don't know what to do to shut down my computer, doing so, he brought to the blue to the top screen when I have not updated it as well. I have not tried to install updates one at a time as I'm not sure how to do this, so I don't know what update is causing the blue screen to come.

  Any help would be really appreciated because I'm a little afraid now.

  Thank you

  Emma

  Bug Check 0 x 24: NTFS_FILE_SYSTEM

  This indicates there was a problem in ntfs.sys , the driver file that allows the system to read and write on NTFS drives.

  http://msdn.Microsoft.com/en-us/library/ff557433%28VS.85%29.aspx

  Cause

  One possible cause of this bug check is damaged drive. Corruption in the system of NTFS file or defective (sectors) on the hard disk can cause this error. Corrupted drivers SCSI and IDE may also compromise the ability to read and write to the disk system, so causing the error.

  Resolution

  To solve a problem of hard drive corruption: Check Event Viewer for error of SCSI and FASTFAT (syslog) messages or Autochk (the application log) that might help determine the device or driver that generated the error. Try disabling any antivirus software or Disk Defragmenter tools that continually monitor the system. You must also run the diagnostics of material provided by the manufacturer of the system.  RunChkdsk /f /r to detect and resolve any file system structural corruption. You must reboot the system before the start of the analysis of disk on a system partition.

  Please, start Windows Explorer and navigate to the C:\Windows\Minidump folder. Then, copy the files to your desktop, zip dmp dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can watch the discharges with the debugger and to see the cause of the accident.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• BlackBerry Smartphones my BBerry is now unusable after trying to update... Please help

  OK, I read all over the internet to try to fix this on my own.  I failed to find a solurion.

  Today, I tried to update my software through the Bberry Bberry Desktop Manager 5.0 software.  I've done several times before and thought nothing of it.  I chose to have provided updates applied/installed and waited while the process that was happening.  Maybe 3/4 of the way through (I don't remember what exact step took place), I suddenly get a blue screen on my computer showing a crash.

  This had never happened before, so I was really hoping that my hard drive is not just conk out on me. Fortunately, it won't happen.  But I was appalled to find that my Bberry had been touched to the point at which I can't return to functionality.

  What is displayed on my phone is a white screen that says this:

  BlackBerry platform 4.0.0.247

  Options [when he selected readings error from net_rim_bb_options_app:Module 'net_rim_locationapi' not found.]

  Saved messages [when selected--> no messages]

  [Telephone service [when he selected readings error from net_rim_vad:Module 'net_rim_bb_phone_api' not found.]]

  Voice recorder Notes [when he selected readings error from net_rim_bb_voicenotesrecorder:Module 'net_rim_mediarecorder' not found.]

  I can't do anything else with the phone.  I uninstalled the Desktop Manager 5.0 and reinstalled. When I connect the Bberry to my computer via the USB cord, it was recognized by my computer, but not by the Office Manager.  I even tried to select in the Options--> menu connections, where my PIN has been posted, but that did not help.

  I uninstalled DM 5.0 and installed 4.7 to see if this can help, and questions remain.

  At this point I don't know what to do.  Can anyone with the expertise of Tech please lead me in the right direction?  Your help will be greatly appreciated.

  Thank you

  Try to follow these instructions:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• Laptop not start after I have updated BIOS

  Toshiba Satellite A215-S5849
  Initially I had problems with the left speaker making a horrible ringing. Seeking advice forums & help & the fact that I'm pretty computer I came to the conclusion to reinstall an operating system was called for.
  Since I use that this laptop for DJing theres only a few programs on it there wasn't much hassle.

  Operating system reinstalled Windows 7 update it & all drivers & the Buzz was still there.
  That's when I read a couple of users of Toshiba laptops said helped a BIOS upgrade.

  So I went to the official page of support Toshiba & my phone flashed using the following BIOS upgrade

  ACPI BIOS Flash version 2.00 for Satellite A215 (PSAFGU/PSAFHU) 32/64-bit

  Towards the end of the flash my pc screen went black power lights are on, power cord light turned on, seeing the battery on just not OS

  What I tried.
  Disconnected from the power supply.
  Battery removed
  Leave for 20 mins & then tried to restart.

  Same thing happens every time
  LEDs power lights HD towers for a minute, but nothing happens after that.

  Any ideas why update official software would cause my computer to not work & how to back up or clear my bios to the default specifications.

  It seems that the Bios Update gone bad and you need to reflash it. you need to contact the asp (SAV):

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  Read this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395&TSTART=0

  Sorry, I put a wrong link before, it is edited above

  Post edited by: Jeka -?

  Post edited by: Jeka -?

• Satellite A200-TR6 - WinPhlash error 1072 while trying to update BIOS

  I recently bought a 4 GB RAM in this machine. Even though I know that Windows will recognize about 3 GB of it, it seems odd that when I'm in my BIOS, it also sees only 3 GB (at this level he should see all 4 GB, no?).

  I thought I should update my BIOS, maybe that would help. I went and downloaded a update of the BIOS of Toshiba, but when I extract it and run WinPhlash, I get "unable to load driver PhlasNT.sys" and error 1072 - despite being connected both code administrator (see screenshot of error message [here | http://img32.imageshack.us/img32/3213/winphlash.jpg]).

  Any ideas?

  Hello

  Have you tried to download the BIOS update again? Maybe it s only a file corrupted
  And for the update, you need to extract all files from zip archive before you start the update and must be logged in as an administrator.

  Normally you should see the 4 GB of RAM in BIOS, but as you know you can t use the entire 4 GB of RAM on Windows. This is possible on a 64 bit OS.

  Welcome them

• Equium A100-147 tried to update BIOS, now won't start

  I was updating the BIOS on my laptop and now it won't start, the screen stay black and I just hear three beep. A long-term follow-up of two short.

  Any help would be appreciated,
  Thank you.

  > I was updating the BIOS on my laptop and now it does not start

  It seems that the update of the bios that went bad and had to be reflashed. Bios recovery is a delicate procedure and you should contact the service center:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• Connection USB Z2 Xperia is not detected (after trying to update Lollipop)

  Hello world:

  I get in most of the topics here, including (USB connection problem FAQ), but not found an answer to my problem. Find the post suggestions when you type the message topic a little clever novelty...

  Well, I was happy to receive my mail yesterday regarding my availability of update available Lollipop Z2. SAT, open PC Companion on my Windows 7 laptop, make a backup of the settings (without photos or apps) and then to receive the update.

  PC companion asked me to keep the phone unplugged, and that it would notify when connect me (Nice also)...

  I started the download, but apparently the laptop came into fashion 'sleep' (not plugged into the wall), which was another reason for not having the phone connected (because of Z2 battery drain charge up to 100%)

  The rest is blurry, but when I woke up the laptop, it stopped downloading at 51% and extending the.

  A method to restart the laptop, but when I tried to connect the phone... nothing. Well, he is never detected by the laptop. Wireless Media Transfer option was still working, but it would not download the update (as if the USB connection is required). Tried to install it on another PC (with administrator privileges) and no go.

  Never started phone update... works perfectly with this exception. PSG, MSC, USB debugging, nothing works). Helium does not work. Nothing!

  I'm kind of crazy, since the update of the pacifier is not destructive (no fading phone data), but it seems that I will probably need to reset the phone.

  Help, please

  Well, it seems that the problem is intermittent, as the PC has detected the phone and I was able to update to the pacifier. So.will hardware problem complete RMA. THANKS for all THOSE who have planted in. Please close thread.

• After trying the update, I get one please stop the daemon Crash Adobe!

  And of course, I don't know where he is. I keep getting the message even after you restart. Help!

  I kept meeting the same problem when I ran the update via the bridge and select more than one program at a time.  I solved it by selecting each update individually. Weird. But everything updated.

  Thanks for your reply.

• computer dead after reboot xp update

  After the restart of all our computers, we had four crashing.  All show the windows startup screen and then go black with the cursor in the middle.  Was able to restart my laptop but my office does nothing.  Same thing with my another desktop computer and another at the office.  All of them are runing xp home edition.  I heard talk more about 50 years crashing in my town and is probably not even scratching the surface.  What has caused this.  Can I recover my files?

  KY-rulez,
  Make sure that you have gone through all the steps in this thread: XP without boot troubleshooting

  If the problem persists try the following commands.

  If you can boot into Safe Mode with command prompt, or if you have a XP CD and you can boot into the Recovery Console, and then run the following commands.

  Chkdsk /r

  sfc/scannow (you will need an XP CD for this command)

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• laptop by closing after trying to update

  When I turn on my laptop it says he put to day but rest at 0% and then stops n automatically repeated this over and over its also locked up I can't do anything? can anyone help with this

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner