His appeal of a symbol

Similar Questions

• BlackBerry smartphones 9790 none his appeal

  OS 7.1.0. Bundle 2102 (v7.1.0.746, platform 9.16.0.159)

  LENGTH: It's in the last 3 months or more.

  PROBLEM: When I call someone or I get a call, I hear not the voice of the other person. However they can hear me talk.

  DETAILS: First I thought that the vollume breakdown, but volume indicator is up. Just in case where I pushed volume keys several times from top to bottom and top - no effect. But if I put the call on speakerphone, I hear other people talking. If I put the earphones - I hear again anyone else. Problem is that if I want to talk normally - with my phone next to my ear.

  PHONE speaker works - I can listen to music on the phone, receive calls and hear the ringing of the phone - speaker works. As I said, the problem is that when I want to talk about the usual way on the phone.

  I suspect that it is software problem. Any ideas how to fix?

  Needless to say - phone rebooted several times after that, battery was released and handed over to, so please do not ask me to just restart, without anything else.

  Thank you

  PS: Just checked - current volume of his profile ("phone calls only") has the value 7, which should be ok.

  I had this problem before with a blowtorch, the problem was caused by a faulty SIM card because she could not communicate properly with the network. You should see if your network will deliver you a replacement SIM card. If no, I wanted to recharge recharge the device through BlackBerry Desktop Software software.

• Appeal procedure in another procedure using the Out parameter slider - lesson

  Hello

  I am new to Oracle development so first I wonder if it is a good place with a simple way of the of on how to create stored procedures?  I'm looking for the most part at this stage for a quick read.

  Second, currently have hacked and slashed my way into getting one built.  It has 3 parameters and an output parameter sys_refcursor.  This procedure works.

  I want to have another created procedure that will call the above procedure and loop through each row in the setting out and write to a file.  Can someone point me to an example of this by any chance?

  Thanks for the help.

  Hello

  e28d78d3-c6c6-4BCE-b14f-0f6bf26fa17c wrote:

  Thanks for the reply.

  Here's what I have, but I'm getting many errors.  When I seem to fix one that I get a new one. Kind of like what it show me all questions vs one question at a time.  I never know if I create another error of my attempts at fixing what, in my view, could be the problem.  In any case, something to get used to.

  When you do any type of programming, take baby steps.  Write less code as possible, test what you wrote ' worm and, if it contains errors, correct them and test again.

  The PL/SQL compiler tries to show all errors, but often it is impossible to say what is a separate mistake, and which is a consequence of a previous error.  For example, the DECLARE statements in your code are perfectly valid PL/SQL statements, but they are the mistakes in the sense that they are not what you think, and you may not use them.  PL/SQL does not know that (I don't really know that, either, but I'm willing to guess in this case).  The works of compiler on the explanation that you really wanted to say SAID, until what it becomes obvious, maybe several lines later, that something makes no sense, but at this time, there is no way he could say that the undesirable DECLARE was the cause.

  So here is where I am stuck currently.  What I want should first, run the stored procedure and I think I do as you suggest.  Which returns data in the output parameter, which is of type sys_refcursor.  I think I would need to loop through each element that cursor and output to the file using the dbms_output you reference and like I did below.  This should be it.  Sounds simple enough, but it's where some of the basics for me.

  For example, by creating the procedure some examples have the name of the procedure and then some "AS", "IS".  When use the beginning and the end and when not I need?

  There is no difference betwwen

  CREATE PROCEDURE... AS and

  CREATE PROCEDURE... Use IS the one you prefer.  You must always one or the other, however.

  PL/SQL is written in blocks.  The basic structure of a block is

  DECLARE - optional, sometimes involved

  ...

  BEGIN

  ...

  -Optional EXCEPTION; forget it for now

  ...

  END;

  Almost all of the PL/SQL code is part of a block.  In fact, you could argue that anything not in a block isn't really PL/SQL.  (For example, CREATE PROCEDURE is really an SQL, PL/SQL not, it indicates the SQL that some PL/SQL compiler is coming.)

  You should always BEGIN and END keywords in a PL/SQL block; None is never optional.

  I think I'm doing the for loop correctly but I get an error on the portion of loop-end.  It is a part of these simple things that become I think that.

  That's what I have:

  CREATE OR REPLACE PROCEDURE APPS.boact_report_3

  AS

  DECLARE v_cur SYS_REFCURSOR;

  DECLARE v_file_out UTL_FILE.file_type;

  BEGIN

  I said earlier, DECLARED may be implied.  It's one of those places if there is nothing after CREATE PROCEDURE... IS and before STARTING, it is supposed to be a statement.

  You can have as many statements (0, 1, 2 or more) that you want in this section of the statement.  The semicolon at the end of each of them is all the separation you need each other; you don't need any keyword as STATED.

  Open the v_cur for

  bo_report (p_sv_id, p_start_date, p_end_date, out v_cur);  -stored procedure that girls v_cur witch is a sys_refcursor parameter.  It works

  END;

  BEGIN

  Don't forget, how to call a procedure is

  bo_report (x, y, z);

  not

  bo_report (x, y, z OUT);

  The key words are only necessary (and only used) in the declaration of a procedure, not in his appeal.  When you create a procedure, you decide if each argument is going to be an argument IN, an OUT argument, or IN OUT argument, and you tell the compiler that you decide.  When you call a procedure, you have no choice; each argument is IN, OUT or IN OUT has already been decided, and suffice to say compiling what are the variables (or expressions) that you use to play these predetermined roles.

  Dbms_output.put_line ('Date: ');

  v_file_out: =.

  UTL_FILE.fopen (' / public/scripts/smorau02 ', 'w_act.csv', 'W');

  FOR x IN v_cur

  LOOP

  () UTL_FILE.put_line

  v_file_out,

  x.cl_num | ','

  || x.wa_id | ','

  || x.Description | ','

  || x.a_date | ','

  || x.a_by | ','

  || x.v_Name | ','

  || x.SITE_NAME | ','

  || x.stage | ','

  || x.in_queue);

  END LOOP;

  UTL_FILE.fclose (v_file_out);

  END;

  Thanks again for the help.

  You have not to send the code to bo_report, so I can't run the procedure.  I do not notice any obvious mistakes immediately superior.

• Some Antivirus is locking up what I try to do. Its called Antivirus Scan. When I try and US Internet Explorer its locked all together towards the top.

  OK, so everything is messed up! Not happy. I have some antivirus a little trying to make me buy stuff here. But that's not all his locked my computer to download anything or update. His appeal analysis Antivirus! If I try and open Internet Explorer locks it upward and said "Warning of Internet Explorer - visit this site may harm your computer!" and I got a window that keeps popping up saying "Application cannot be run. The file wuauclt.exe is infected.
  You want to activate your antivirus software now? "Please please help me.

  This looks like one of the fake antivirus applications that gets allows you to install malicious software. Try to run several malware scanners. It is better to run more as each will be looking for things that the other miss. Some scanners, you can try are:

  • Malwarebytes
  • SUPERAntiSpyware
  • Ad-Aware
  • Windows Defender
  • Spybot S & D

  If malware scanners above do not find malware or may not delete it, you should consider the assignment in one of these forums using specialized malware removal:

  • http://forums.Spybot.info/
  • http://www.spywarewarrior.com/index.php
  • http://Forum.aumha.org/
  • http://www.bleepingcomputer.com/forums/
  • http://www.spywareinfoforum.com/

• Get a LV tree ctrl sequence structure

  Hi, I'm an editor to customize certain parameters of the sequence (for example "run mode). I would like to import into a tree LV throughout the test sequence control now the structure of the original. I mean, every step is a part of the tree (A Test, Test c...), while each subsequence call is a node of the tree (B Test, Test B_3), the parents of some children. The TS API using, I can go through the sequence of main and all the subsequence but I can't find the link between the subsequence and his appeal. I find that the B Test is a call of the sequence but not what subsequence appealed.

  If using, I can post part of the code.

  Thank you very much.

  LoGatto,

  In order to get information about the calling sequence step you want, you will need to use the TestStand adapter API.  You must get the Step.Module of the call sequence step object and then cast to a SequenceCallModule object.  You can then get the properties you want.

  You can see how the TestStand courses come together here: http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/infotopics/using_teststand_api_objects/

  There are also several useful KBs out there, if you are looking for a combination of TestStand/LabVIEW/adapter API/Module/etc.  And here's one I found: http://digital.ni.com/public.nsf/allkb/ADC6909C20E27D4886256E94005424E3

  I hope this helps!

  P.S. To "climb" in LabVIEW, use the node of the 'data Variant.  Be sure to close all references!

• Programmatically create new consumers in a MANUAL

  Howdy, I am struggling with a concept for an installation of BAU.  Say I have a main VI consisting of one producer and single consumer sharing a queue, which can be filled in entries/actions of the main front of the VI.  Convening of reentrant under reference screw consumers live each of them open their own front panels and run their own QMD, or other machine state until closed by the user.  It occupies the main VI consumers until the responsible VI is closed, as consumers waited for the release of the call by the reference node, even if the called VI have not may not be output.  So the main VI would be able to queue more elements, but these elements would not be executed until execution of the first element is complete (the called VI), and an additional contribution of the façade of the main VI not would not be executed as long as the new face before a was closed.

  To resolve this problem, I thought adding more consumers (with the same subsidiary screws) to the same producer, creating new queues for each consumer, and then when a new item is added to the structure of the event in the producer, he wondered each queue looking for a queue (and thus a consumer) that contains zero element in queue and adds the new queues.  This should ensure that in case of more great events of façade VI, they would run even with another open front.

  But this means I can have only as many windows open as I do in my VI main consumers.  My question is, is it possible to call a VI so that it does not occupy the while loop containing his appeal through the reference node until the front panel of the VI called is closed?

  Thank you in advance!

  Also I just tried it. Setting of the façade open when a property called on a VI is not enough. You must explicitly open it with an invoke node. And you must specify the reference open VI it is reentrant, even if you have the reentrant VI properties.

  

• How can I report a phone call about a person borrows an identity a Microsoft Technician

  August 18 at 14:49, I received a call from someone claiming to be a Microsoft technician. I barely understood what they said because there accent of the Middle East, but he said that it would be just a matter of time before my computer would crash because of the amount of errors on my computer. He then asked me to start my computer and to now hold the window by pressing the letter R and type eventvwr , and then press ok. A screen came up and on the upper left corner, was asked to support customs seen by double witch clicking grew to administrative activities and double-click on it. I was then invited to watch the center of the screen and above and asked if I could see administrative events and how much was there. I told her that there are 528 events. He then told me to scroll down on the list and all I could see were triangles (warnings) yellow and Red errors, 528 combined overall. He then told me that this list would continue to multiply until my computer would crash. He began to talk about a guarantee of microsoft which would prevent this list to build up again in the future. I told her that I had never heard of a software microsoft warranty. I asked him how this warranty was going to cost me, and he said it would be $ 109 for three years. First, I need to transfer control of my computer to a microsoft technical repairs and that I must leave my computer for a few hours, the time required to carry out all the repairs but first, I have to go to a website called www.ammyy.com . On this site, that I was told that I would be able to transfer control, and when repairs were fix, the technician would present me with a form, I have to fill in for Microsoft software guarantee for an amount of $ 109. I was wrong as well transfer controls because I started to suspect a fraud and I told him that I would not go further with that and that I was going to hang up the phone. His appeal is still on my phone but the number is not available so I can't remind him or provide Microsoft with phone number here. I hope that this information will be useful to Microsoft.

  Kind regards.

  Andre Lavictoire

  Fake phone calls to technical support

  Calls unrequested telephone of this nature are almost always a common scam and are well known by Microsoft. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

  Please see:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft issues never not solicited for phone calls of support or security.

  These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.

• white screen, reboot, deleted playlists...

  Hi all

  First question:

  On my rocket 4 GB, 4 GB internal memory, recently, I notied that I unplugged the sync/charge cable (connected to my PC) an all white screen appears. I can turn the power off and turn it back on, the unit will restart and all is well. However, yesterday is the same thing I followed the same process, and now several of my playlists are gone.

  Second question:

  Perhaps the first problem, I plugged the unit into the sync/charge cable and pulled the top of WinAmp. However, now WinAmp is not music to internal memory. The additional memory card seems to have not been applied.

  The last time a similar occurrence that happened I just formatted the device and started around. However, I am not prepared to exercise this function this time also.

  Rocket is running current firmware.

  Any ideas?

  -Jeff

  I called Sansa. I had someone who was in a hurry and was not fully listening. It seems like he was following a set of steps and should touch his appeal quota for the day number. Well, anyway...

  First step: he has accompanied me through to reload the firmware. Nothing. It does still not show in WinAmp to have all the files on the internal memory.

  Second stage: he wanted me to just format the device without further tests and keep saying "mm - hmm" as if to say yes every few minutes, and yet I didn't do anything. I checked to see if a reboot helped or anything else would work. Nothing. So now, to clarify, the device works properly except lack some playlists; However, WinAmp will not see the internal memory. He is clearly corrupted data. I have just added a few songs the other day. Then I suggest to abolish the last files that could cause corruption. Nope, he just said ' hmm mm... mmhummm Ok, so now us ready for the format?  What I end up with? So, I formatted the device and it solved the problem. Today's WinAmp showing without music (of course) but it won't let me add playlists to it.

  This is the third time that this happens, to format the device. I can finish to sell it and get something else.

• I received a phone call from someone claiming to be windows saying that my computer has been infected.

  only, I was contacted by a person claiming to be windows saying that my computer has been infected and he called for help.  He hit me the windows and "R" key at the same time.  Then I typed in "eventvwr" and who showed me a list of some events with indicator red and yellow.  Then he wanted me to go back and enter "iexplore www.support.me", so he could fix my computer.  I became very suspicios and did not continue with his appeal.  Is it a hoax or someone really trying to help me?  Because I did not communicate with him, I feel that this is not a legitimate operation.  Thanks for your help.

  original title: telephone call from Windows?

  Hello

  It's a scam.

  Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  We have all the errors and warnings in our Event Viewer

  That's what you do if you never give them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  See you soon.

• Make a call from your car using bluetooth with M4 aqua Dual SIM

  If you call diretly from your phone, you have to choose the SIM card to make this call, right?

  If I try to do the same thing using my connection (free hand), bluetooth on my car, the conections seems to be done, but not his appeal and no connection is made (it end abruptly).

  On the other hand if I get a call, I can answer, normally on my car!

  Help, please!

  PS excuse my English is not my mother tongue.

  You need additional software to automatically choose which SIM card to use in outgoing calls. Currently Android 5.0 do not support this feature. There is a similar topic about problems with dual SIM Bluetooth hands-free/car connections and below. You can use 'real Phone Dialer and contracts' app - it work perfect with car and Bluetooth hands-free.

• removing an annoying bug of e-mail

  the source code of the e-mail is shown below - sent me for no reason I can understand (understand) so I have posted here and will be in the range of nmap the original sender however localhost will appear as the default sender, which implies a machine not microsoft in my opinion a worm any or evidence of a Trojan horse - none found yet on my machine but the question arises - several of them arrived in my windows live mail folder of spam - often I just delete and block - most only contain links to a Web site - then we are the last email this product and is the first one who seems to be addressed directly to my account which removed the text of the code. Of course, we have to at some point or other signed a petition and of course the petition did not get through. so I post here. for some reason any that have been dumped in my lap - I find better to - put somewhere where others can see it. This message source must be interrupted on as many tips I can find

  X-Message-delivery: Vj0xLjE7dXM9MDtsPTA7YT0xO0Q9MjtTQ0w9MA is
  X-Message-Status: n: 0
  X-SID-PRA: Mail Delivery System<*** email="" address="" is="" removed="" for="" privacy="" ***="">

  X-AUTH-result: NO
  X-Message-Info: JGTYoYF78jHZ7l4yg8oR2m5zV2ciIak4kbjQ94R0gJIBK3uyNUaiJr + tVJ1Gt0BynY0zIXuiypH1Uv + R54AGgS87nLrwJmAtyPkoJHd

  / Jr8 =
  Received: from mx70.getactive.com ([65.160.234.70]) by with Microsoft SMTPSVC();

  Mon, 6 Sep 2010 21:27:35-0700

  Received: from localhost by mx70.getactive.com;
  06 Oct 2010 21:27:35-0700
  Message-Id:<8q06vd$*** email="" address="" is="" removed="" for="" privacy="" ***="">
  Date: 06 Sep 2010 21:27:35-0700

  TO:

  From: "Mail Delivery System".<*** email="" address="" is="" removed="" for="" privacy="" ***="">

  Subject: Delivery Status Notification (failure)
  MIME-Version: 1.0
  Content-Type: multipart/report; report type = delivery registered; Boundary = "1bLkCm.4ZwFGzTcM.ZnVtv.DF + vEsM"
  Return-Path:<>
  X - OriginalArrivalTime: 07 Oct 2010 04:27:35.0693 (UTC) FILETIME = [FF3A13D0:01CB4E44]

  -1bLkCm.4ZwFGzTcM.ZnVtv.DF + vEsM

  content-type: text/plain

  We received the following message to <*** email="" address="" is="" removed="" for="" privacy="" ***="">.
  The reason of the

  problem:
  5.1.0 - unknown address error 550-' error: Message content rejected '

  -1bLkCm.4ZwFGzTcM.ZnVtv.DF + vEsM

  content type: message/delivery-status

  Final-recipient: rfc822; address email is removed from the privacy *.

  Action: failure
  Status: 5.0.0 (permanent failure)

  Diagnostic code: smtp; 5.1.0 - unknown address error 550-' error: Message content rejected ' (delivery attempts: 0)

  Reporting-MTA: dns; MX70. GetActive.com

  -1bLkCm.4ZwFGzTcM.ZnVtv.DF + vEsM

  content type: message/rfc822

  Received: from unknown (HELO weba1.sac.getactive.com) ([])

  by d1.iron1.getactive.com with ESMTP; 06 Oct 2010 21:27:25-0700

  Received: from weba1.sac.getactive.com (weba1.sac.getactive.com [127.0.0.1])

  by weba1.sac.getactive.com (Postfix) with SMTP CD6B02C796E id
  for <*** email="" address="" is="" removed="" for="" privacy="" ***="">; Mon, 6 Sep 2010 21:27:24-0700 (PDT)

  Date: 07 Sep 2010 04:27:24-0000
  Message-ID:<*** email="" address="" is="" removed="" for="" privacy="" ***="">

  From:

  To: * e-mail address is removed from the privacy *.

  Subject: Free J.S. Tissainayagam

  President Mahinda Rajapaksa

  Sri Lanka

  Dear president Rajapaksa,

  J.S. Tissainayagam, sri Lankan journalist was arrested in Colombo
  and imprisoned under the Act on the prevention of terrorism for two
  The articles he wrote in a monthly magazine.

  Tissainayagam's articles might be controversial, but nobody does
  should be deprived of the right to freedom of expression.

  Journalism is freedom of expression, freedom of expression must be
  protected.

  J.S. Tissainayagam was sentenced to 20 years of rigorous
  imprisonment and now appeals the conviction. It was granted
  release on bail while his appeal is pending. International
  Community believes that Tissainayam is being persecuted for no.
  What journalistic relations.

  I urge you to eradicate the condemnation of J.S. Tissainayagam and
  amend the law on the prevention of terrorism so that it cannot be
  used misused to restrict freedom of expression.

  Sincerely,

  -1bLkCm.4ZwFGzTcM.ZnVtv.DF + vEsM -.

  Please note that some, if not all of the information given in the text before the beginning of the source code of message is a malaprop technique (signed gerontium) - this does not mean that the info in the source of the e-mail is not valid because it is. The question is really if the petition site helps hoaxes, phishers and other malcontents or if the above mentioned Government blocked a petition as spam - the other question is if other people who signed the petition also took this message to them or if I was the only one - I had problems recently with a router of thugs attached to my laptop - (address mac and other technical info (was captured so I know this isn't mine) I leave this riddle with anyone who wants to answer - the above router attached to my laptop just as I was about to post this message-source taken in flagrante - it was a good trick if I say so myself - it was a good thing that this message has arrived when it was done - I thought about how catch the rogue router again so I could build a collection of jpg prnt scrn data - address corresponding mac and unique identifier string and so on - it worked this time :-)

  A lot of that is spam, and you can filter using message rules for messages of the shuttle to a junk e-mail folder, where you can then examine and delete it.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  Delivery Status Notification (failure)

• Network access protection

  I received a call from a person with a very strong accent saying he worked for Microsoft and telling me my PC necessary updates up-to-date, because NAP has been turned off.  He wanted me to type eventvwr in the run, then click Enter.  I stopped there and told him it was a scam and he quickly hung up.

  My question is, should I have it?  Is it possible to see if the malware is on my pc?

  My PC is a pc at home on my own network.  It is not connected to the job or something like that.  I run windows 7 and have Avast first 2015 as my anti-virus.

  I remember a few weeks there is a message that I couldn't close that said to call for an urgent update microsoft and he had a number.  I ended up restarting my pc.  Once in a while when I'm on the internet, I see another open window and contains ads that I know that I did not open.

  Thank you, Manny B

  Friday, November 6, 2015 18:09:42 + 0000, MBar1958 wrote:

  I received a call from a person with a very strong accent saying he worked for Microsoft and telling me my PC necessary updates up-to-date, because NAP has been turned off.  He wanted me to type eventvwr in the run, then click Enter.  I stopped there and told him it was a scam and he quickly hung up.

  My question is, should I have it?  Is it possible to see if the malware is on my pc?

  See other responses, you got and let me add the following:

  There is no particular reason to worry about the malware infection
  as a result of his appeal. You can completely ignore all the
  Crook said.

  However, it is always prudent to check for malware
  infection. You should do this with two programs, antivirus (such as
  Avast. that you are already running) and an anti-spyware program.
  as the free MalwareBytes AntiMalware.

• Windows 7 cursor problem.

  At the start, my cursor looks like and acts normally. But after some use, IE. display Web pages, folders, opening, the size of the cursor is growing! Although in the properties of the mouse - pointer, he says that he is currently using the system windows aero system, it seems as if his appeal to the schema of the extra-large system. And if I change my pointer to this plan, the cursor appears even more great. He returned to its normal size after a reboot, but eventually the problem comes back.

  What graphics card you have? Is the ATI Radeon...?

  You can also read this topic: huge mouse under Windows 7... pointer

• TCS Auto Dial with MCU

  I have 4 points of C20 endpoint that will call in a standing conference that is configured on the MCU 4501.  The customer has also a TCS as we would like to record calls with.

  If I place the TCS to call the microcontroller on a permanent conference it never ends.  All my clients can end it calls but how am I supposed to get the TCS to put an end to his call?

  For now, I tried to settign the Permanent Conference call TCS, but then the TCS records when nothing happens and never ends his appeal.

  Is there a better way to implement?  I don't want to use Adhoc calls and it must be easy for the customer.

  Most of the time the CHT requires a VCS.

  You can try to do only one, the "President" of your Conference permanent.

  Set the Conference to terminate when only participants are present.

  Configure the alias for the TCS as an endpoint.

  Configure a specific permanent conference to call for the specific TCS as a preconfigured participant alias.

  Join the call of the President.

  Join the call as the participant.

  MCU call TCS.

  Chair leaves the meeting.

  Meeting move out.

  While I don't have this Setup myself, we are essentially doing the same thing with an outgoing PSTN, so I don't see why it would be different.

  The TCS is registered to the GA on the MCU as well?

  Why no VCS?

• a wrong number or types of arguments in the call to and

  Hello

  Description: problem connecting to a database of the relationship of the processor of the NDA.

  I want to enrich the incoming events with available data in the relational database. As stipulated in the Oracle® CEP Administrator's Guide, I created the

  Data source JDBC in queue server configuration (config.xml). As he didn't throw me any error while staring at the server, I guess, the data source is fine.

  I followed the steps below:

  1 creation of the types of events in my context.xml in my application (fields in my paintings are shown as the property).

  < wlevs:event - type the type name = "walletMonitoringEvent" >

  < wlevs:properties >

  <! - walletkey in db is of type varchar - >

  < name wlevs:property = "walletkey" type = 'char []' length = "20" / >

  < / wlevs:properties >

  < / wlevs:event - type >

  2 create a "table" in context.xml

  < wlevs:table - event type = "walletMonitoringEvent" id = "walletMonitoring" data source = "walletDataSource" / >

  3. added the table source in my processor.

  < wlevs: channel id = "inputChannel" - type of event = "WalletEvent" >

  < wlevs:listener ref = "walletProcessor" / >

  < / wlevs: channel >

  4. has tried to link the database to the CQL processor.

  " < = xmlns:wlevs wlevs:config ' http://www.BEA.com/ns/wlevs/config/application "xmlns:jdbc =" " http://www.Oracle.com/ns/OCEP/config/JDBC "> "

  < processor >

  < name > walletProcessor < / name >

  < rules >

  < request id = "F1" >

  <! [CDATA]

  Select i.walletkey, i.createdDate in inputChannel as I, walletMonitoring w

  where i.walletkey = w.walletkey

  []] >

  < / query >

  < / rules >

  < / processor >

  < / wlevs:config >

  I get the error in the logs when I try to deploy the project below:

  < 17 November 2014 13:46:16 THIS > < emergency > < CQLServer > < BEA-000000 > < CREATE QUERY AS F1

  Select i.walletkey, i.createdDate in inputChannel as I, walletMonitoring w

  where > > i.walletkey = w.walletkey < <

  a wrong number or types of arguments in the call to and. Check the spelling of the registered service. Also confirm that his appeal is correct and its settings are correct data types. >

  < 17 November 2014 13:46:16 THIS > < emergency > < CQLServerTrace > < BEA-000000 > < oracle.cep.exceptions.CEPException: number or types of arguments in the call to and wrong >

  < 17 November 2014 13:46:16 THIS > < error > < CQLProcessor > < BEA-000000 > < unable to create the declaration [F1].

  Invalid statement: "select i.walletkey, i.createdDate from inputChannel as I, walletMonitoring w.

  "where > > i.walletkey = w.walletkey < < '.

  Description: a wrong number or types of arguments in the call to and

  Cause: This error occurs when the named function call cannot be matched to any declaration for this function name. The function name can be spelled, a parameter can have the wrong data type, or the function declaration may be faulty

  Action: Check the spelling of the registered service. Also confirm that his appeal is correct and its settings are correct data types. >

  < 17 November 2014 13:46:16 THIS > < error > < deployment > < BEA-2045013 > < the context of the "updateWallet" application could not be started. The cause is:

  Invalid statement: "select i.walletkey, i.createdDate from inputChannel as I, walletMonitoring w.

  "where > > i.walletkey = w.walletkey < < '.

  Description: a wrong number or types of arguments in the call to and

  Cause: This error occurs when the named function call cannot be matched to any declaration for this function name. The function name can be spelled, a parameter can have the wrong data type, or the function declaration may be faulty

  Action: Check the spelling of the registered service. Also confirm that his appeal is correct and its settings are correct data types. >

  Hi Siva,

  It seems the event type walletkey property is set incorrectly. Please try to set the event as follows:

  Use "char" instead of "char []."

  Best regards

  Sandeep