Pavilion P6 2207ep: HP Pavilion P6 2207ep boots at random

Similar Questions

• Pavilion G6-2270dx: boot loop

  G6, Win 8.1 Pavilion.  To turn on, I see the HP logo with swirling dots.  After a few moments, a box of gialog on light blue background (remincent of Win XP) appears with the date/time and the box 'OK '.  After three seconds or if the system reboots.  By pressing the key ESC annoys me to the list of Information/Boot/Diagonostics/BIOS/recovery.  I ran full diagnostics blown without identified error.  I can't recovery/restore pages; selection of F11 returns me to the loop start endless.

  Reports of the BIOS version F.10. The journal poster D 090, 0021, 03F0 and error codes 0301.  Not sure resetting the BIOS because I don't know much.

  I tried the remedies listed in other parts of the forum; Press the Insert with button / stop, no battery, etc. hold but I find still more suggestions...

  Hi @bomber6e

  Thank you for your inquiry.

  I understand that during startup, you see the HP points logo swirling. After a few moments, you see a clear blue screen with the date and time and the possibility to press OK, a few seconds later it will reboot.   If you press the ESC key, you get to the bios screen. When you press F11, you are unable to get to the Recovery Manager.  Your current version of Bios is F.10 and the journal poster D 090, 0021, 03F0 and error codes 0301. You have run the diagnostics but no problems have been detected.

  Here is a link to help you with this question:

  HP computers - the computer restarts unexpectedly (Windows, 10, 8)

  Please let me know the results.

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community! To show recognition for my efforts please click on the ""Thumbs Up " below."

• Pavilion 500 - 206t: Boot Manager does not appear in the sources of boot UEFI

  I had a working system, until I installed Fedora on it...

  I have since removed Fedora, but cannot get the windows partition to start for the life of me.

  In the bios, I don't see "Microsoft boot manager" in the list of Sources of boot UEFI in the boot order.

  I have the original, untouched windows 7 x 64 partition, the HP recovery partition and 10 windows partition, I recently did a clean install, but still no start.

  I've deleted and recreated a 100 MB EFI partiton and a partion of 128 MB msr by using diskpart.

  formatted fat32 EFI, left the msr as-is.

  C:\Windows\Boot\EFI\ files on the EFI partition in \EFI\Windows\Boot

  Creates the via bcdedit boot manager entries.

  I tried:

  1. Bootrec /fixboot
  2. Bootrec /fixmbr
  3. Bootrec /rebuildbcd

  I also used boot bcd with uefi function to copy the files on

  I used an installation disc USB win10 to the foregoing as a win7 disc does not have the USB drivers for the keyboard and the mouse.

  Am I missing something for the HP Pavilion?

  Thanks in advance

  Repair of windows did nothing.

  I created a ultimatebootcd USB drive (http://www.ultimatebootcd.com/) and used parted Magic/clonezilla in order to image the old windows and partitions of hp recovery (not the entire disk) to a USB external HDD (plugged into USB 2.0 port)

  Then I deleted all partitions with parted magc.

  Install win 7 on the system with no partitions, it's easier to reduce windows on partition of 100 MB, but you can adjust it later, also don't you bother with the product key, ignore her.

  Restart the ultimate boot CD, choose parted Magic then Partition editor and create an important partition for windows = or superior to what it was when he was photographed. If your new installation of win 7 took the entire disk, simply to reduce the size of the partition and create the large partition to restore to, don't forget the restoration of 15 GB HP as well. If you don't see all the partitions or get an error in the score editor, see this link: http://ubuntuforums.org/showthread.php?t=1619381

  don't worry about formatting new partitions.

  To restore, you will need to rename the image files on the external hard disk created in the second paragraph above. The partition names will be changed, see this link: http://drbl.org/faq/fine-print.php?path=./2_System/102_restore_image_to_different_partition.faq#102_restore_image_to_different_partition.faq

  After the restoration, start windows installation disk and repair, it will be your old windows partition, restored. Save and reboot the old partition. If everything is successful, you can delete the newly installed partition win 7 and use msconfig in windows to delete startup entries. You can use parted magic to cultivate the restored partition, if you wish.

  Then, install windows 10 to get a true EFI boot.

• HP Pavilion Dv7: No boot device error * HELP *.

  I have an old Pavilion dv7 laptop that does not start because he apparently didn't quite "bootable devices." I looked this error online and once I opened it upward, I discovered that whoever worked on the last laptop didn't turn screws from the hard drive hard drives seem to be correctly connected but my question is, is this the problem?

  Any help would be appreciated!

  Full of error: (Black screen)

  Realtek PKU Express Gigabit Ethernet controller series v2.26 (090219)

  PXE - E61: Media test failure, check cable of

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  ~ Carbender

  Carbender wrote:
  

  I have an old Pavilion dv7 laptop that does not start because he apparently didn't quite "bootable devices." I looked this error online and once I opened it upward, I discovered that whoever worked on the last laptop didn't turn screws from the hard drive hard drives seem to be correctly connected but my question is, is this the problem?

  Any help would be appreciated!

  Full of error: (Black screen)

  Realtek PKU Express Gigabit Ethernet controller series v2.26 (090219)

  PXE - E61: Media test failure, check cable of

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  ~ Carbender

  First, take out the HARD drive and put the screws to the right to maintain and replace the HARD drive and reboot again. It could be that the missing screws causing the HARD drive vibrates too and make the heads and causing the HARD drive having problems.

• Intermittent problems with HP Pavilion m9070.uk Boot

  I'm trying to fix the computer of my OH but not anywhere get quickly.

  Its a

  HP Pavilion m9070.uk purchased in January 2008

  32 bit

  on Vista Home Premium

  hard drive 500 GB

  Until a few days ago, this PC worked fine without any problems, but now, it's another story.

  It intermittently does not start, even if this becomes more common and more frustrating. Sometimes I can get it to go by typing either Esc, F8 etc., sometimes it goes its own and sometimes it does not at all for several attempts. Once it boots it works fine even if don't wake up to the top of his sleep sometimes, but maybe it's a different problem. Nothing I did mades difference and help would be appreciated.

  I followed these instuctions

  http://support.HP.com/us-en/document/c00899280

  Driver roll back, reset BIOS, bootfix etc and then a full system recovery back to the factory settings and whenever it works for a while but the switch it out overnight and it will not start without persuasion.

  The first time, the problem occurred the PC Beep, but all quickly extinguished husband and is not sure of the model beep. There has been no subsequent beeps however. At one point, we got a BSOD, but the code does not identify anything specific and I can't find where I wrote it down, will have another look, but again once he didn't come back either.

  Where should I go from here?

  Any help would be appreciated.

  Thank you

  Julia

  Did you install anything? Have you removed any hardware or software?

  Follow these troubleshooting steps.

  http://support.HP.com/us-en/document/bph06788

• Windows 8 HP laptop Pavilion will not boot from the cd?

  Hi all

  I have a Windows 8 HP Pavilion laptop. I forgot the password of my account, but I wasn't worried because I had a recovery disc. However, even with the cd in the laptop, I directed to the login page every time. I want the cd to run the place and recover my account! I have enabled the legacy in BIOS and disable secure startup, and I even changed my boot order to put the boot first CD. None of this works well. Can someone help me? I really want to access my laptop soon.

  Thank you

  Alice

  Immediately after switching on the laptop, press the ESC key to get a menu. Then press F9 boot options. Use the arrow key to move down and select/highlight the CD/DVD drive, and then press the Enter key.

• Pavilion a6542 - no boot, freeze on blue HP Invent screen

  I need help... My Pavilion a6542 does not start. It gets stuck on the blue HP Invent screen. The Bios menu is not accessible (F9, F10, F11 keys don't work), even if the keyboard lights are turned on.

  Features:

  It was working fine yesterday, and it does not work anymore. I did not any recent installation or HW SW.

  The PC is only 2 years old.

  Motherboard is Asus IPIBL-LB (Benicia).

  I took the steps - following troubleshooting unsuccessfully:

  I tried another keyboard.

  I tried to boot from a bootable CD (I tried Fedora Live CD and Ultimate Boot CD), but it does not start.

  I reinstalled the cables on the motherboard, I reinstalled 4 memory cards, I reinstalled the HARD drive connectors.

  There is no dust or burned capacitors on the motherboard.

  ==> Someone can help me diagnose the problem and find the solution? Thank you!

  I could see that your troubleshooting resulted in a conclusion that your HARD drive is defective, which confirmed my suspicions.

  You can replace your HARD drive and try to enjoy many services for Hard Drive Data Recovery. First try the manufacturer

  of your HARD drive.

  Best regards

  TEDUin Manila

• HP Pavilion 500-297c: Boot failure now need to recoversystem

  My Pavilion 500-297c will not start.   All initial tests HD pass ok.   I am running an extended test.   Resetting the system w/maintain files fails.

  I guess even a hard disk failure.   I purchase and install a new HD.  The system came with Windows 8, which has since been upgraded to Windows 10.

  So, I'm going to need some kind of bootable recovery disk HP.  No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Also, given that the current hard drive always seems to work at least in part, I hope to set it up as a second drive on the system once I get the new HD installed.  What is the best way to try that?

  > No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Because Windows 10 _was_ installed on your computer, a "fingerprint" of your computer is registered with Microsoft.

  This 'fingerprint' allows you to download Windows 10, on any computer and create a bootable DVD that can be used on your computer, without having to enter a 25-character license key.

  Reference: https://www.microsoft.com/en-us/software-download/windows10

  There is no need to wait for HP to courier-ship anything for you.

  Tip: buy a new disk drive and install, remove your current hard drive.

  Install Windows 10 on the new drive and then attach the old drive as a "slave."

  and copy all your files to it on the new drive.

• HP pavilion 15-b061sf: Hp pavilion 15-b061sf boots for 2seconds

  Hello

  I have a Hp pavilion 15-b061sf with a strange behavior

  I check on a lot of forums and also the HP forums, but no one had this case.

  When I plug the thumb AC adapter led amber / red for 1 second, then it starts flashing white.

  When I try to turn on the computer, it starts for 1 sec then stop immediately, after that I can not turn on, I need to remove the power adapter for 10 seconds then plug it in again but same thing happens.

  I tried a hard reset without adapter without battery and 30 seconds to power, but that has not solved the problem.

  What can be the problem?

  AC adapter / CC or motherboard?

  Thank you.

  Hello

  It seems that my idea was good

  I disassembled it and all tested, but I was conviced that the adapter has a problem.

  So we tested it with a voltmeter, free of charge, we have 19V, but if we try to put a light bulb with 2-wire, he goes to 19V and immediately drops to 0V (same thing when I put the computer)

  So I'm sure a 99.9% that the adapter is broken

• Pavilion G6-1323tx: Boot UEFI Paviion G6-1323tx

  HP support... I need to update of portable Pavilion G6-1323tx bios that may start in UEFI mode? Help me???

  Hello

  It is a peer to peer forum and I do not work for HP - however, I can say that there is not only a bios update which will bring you support of uefi.

  The list on this link was published by HP and unfortunately, your model is on the list "not supported".

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/consumer-notebooks-and-Windows-8-overview-of-BIOS-updates/m-p/1984731/highlight/true#M161974

  Kind regards

  DP - K

• HP pavilion a1547c: disk boot failure! Appears on the screen

  How can I reboot my hp pavilion diskless desktop computer

  The message means that the hard drive has failed.  An answer to the question "did I can restart my desktop hp pavilion diskless computer"-No.  Is there not a drive then there is nothing to make the computer.  If the hard drive has failed, then it needs to be replaced and use the recovery media for the computer or use something else, either.  If you do not have the recovery media set, it can be purchaseHERE or you can use a Linux OS for use of a temporary or permanent basis.

  OR buy another OS such as Windows 7.

• HP Pavilion 15 laptop: boot image selected is not authenticated

  When you turn on the laptop says «boot image selected not to is not authenticated...» "What do I do?

  It's your computer laptop one with a removable battery?

  Remove the battery, unplug the power adapter and press and hold the power button for about 15 seconds. That will reset the hardware of the laptop.

  Put the battery back in and press the power button.

  Post your results here if you please.

• PC laptop Pavilion 15: freezing boot screen after installing Visual Studio 2015

  Hi all

  I have a problem on my laptop which is the startup screen freezing after installing Hyper-V on Windows Pro 8.1. Actully I need because it is used by Visual Studio 2015 do Andriod device emulator work

  After a search internet I found that this problem is caused by the driver Ralink Bluetooth and common

  I'm also thinking that I can boot windows successfully when I disable virtualization BIOS, so I logged on windows and I have tried a few solutions

  1. Disable Bluetooth device-> does not

  2 - Install the latest Ralink driver-> does not

  3. Remove VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00-> work but the returned key after that restart so I have to delete this key, everytime I open windows, and more that's a problem with virtual switches on Hyper-V

  Any solution permanent please?

  Hello

  Which driver Ralink, have you tried?

  I discovered Mediatek drivers which are no longer updated.

  Not sure if that helps in your case with Visual Studio.

  Here is the link:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71572.exe

• HP Pavilion 15_AB290SA: Dual Boot

  My computer came with Windows pre-installed 10 and without disks. During the process of installing Linux 17.3 Rosa "Mate" operating system I have inadvertently erased the disk hard don't drive so no Windows 10. I installed Linux and that's all working well. I tried to install Windows 7 and I get an error: "Partition must be formatted as NTFS. Then, I am unable to act.

  There are 3 partitions and that's what they say:

  Disk 0 Partition 1 is an EFI system (I presume that's where the Linux OS is installed)

  Disk 0 Partition 2 & 3: System not recognized.

  The system is a wired LAN setup.

  The only piece of software that I downloaded from Epson is a printer driver.

  I have another laptop (advent) and a PC (HP) both running Win7 and Linux as a dual boot to operating system installation.

  Can anyone help?

  Thank you very much

  What for your application you must go online and research to dual boot and see what options you are looking for.

• G72 Pavilion. : no boot device. Insert the disk and press any key

  My hard drive died recently. I installed a new. Now I'm gettig no boot device - insert boot disk and press any key. What should I do to fix this?

  Hello

  If you find your recovery DVD, you can use them to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not, you can order a replacement set by starting at the link below-, the cost can vary a bit depending on where you live, but they are generally inexpensive.

  Order HP recovery disks.

  If you have a problem with this link, try to order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K