hitTestPoint do not recognize the full form

Similar Questions

• Disk management does not recognize the full disk size

  Just got a 3 TB internal SATA to replace one more small one (~ 300 GB). It is a secondary (non-bootable) drive, as it was the drive of ~ 300 GB it replaces. BIOS recognize drive 3000GO and simple BIOS of the drive test passes, but disk management it shows as only 746 GB. How can I get the full capacity? TIA.

  See this:

  How to fix the 746 deliver GB available to a 3 TB hard drive
  http://www.servethehome.com/fix-746gb-3TB-hard-drive-issue/

• CS3 preferences/Performance, do not recognize the full amount of memory

  I increased in a Windows XP Pro 32 bit PC, 2 GB, 4 GB of RAM.  Windows recognizes that I have 3 141 872 kb of physical memory available.  However, Photoshop CS3 shows only the available 1 705 MB RAM (Edit-Preferences-Performance-Memory use).

  I am planning to make changes to Boot.ini in the/3 GB and / USERVA switch to increase the RAM available for PS I have assumed that the PS would show an increase of RAM available, even before changing the switches.

  I was assured by a knowledgeable Windows/PS user that these mods are forward.  Yet, when I told him that the PS was not to recognize the new Ram, while Windows XP was grateful that she, he suggested that I have this post on the Adobe PS forum.

  Therefore, my thread.   In summary - why don't PS recognizes the new amount of RAM, or how I hurt the concept?  (It's probably operator error.)

  wrdpico wrote:

  If it is correct (and Boot.ini mods are not used), then to experience the 'efficiency' of PS RAM between Adobe allowances recommended by 55% and an aggressive upper limit of 71%, makes sense.  I have it?

  Yes.

  Yes, experimentation is logical because some features of PS (plug-ins, etc.) are the same and no evoluted (size of the file, the complexity of the operations performed, etc.) are the same.

• Button send email, do not give the full form

  Hi guys

  I am new to LiveCycle Designer, so my problem can be something very simple that I missed.

  I have a simple form that I intend to use for my clients in training sessions to book with. There will be emailed to them or downloaded from my Web site to fill out and the submissive me via the button send email at the bottom of page 2.

  My form has no fancy coding or content Dynamics - simple text fields and combo boxes. The subform spread 2 pages and everything is included in just a subform.

  The send e-mail button compose an email with the attached xml file, but the xml file contains the data in the tables on page 2 - 1 page fields is completely ignored.

  Can someone help me out with this please, I would really appreciate it.

  Hello

  If you look at the object / link tab, then select subforms and various objects. You will see that on page 1, that they are set to 'None '. considering that you will need these together on 'Normal', as the table on page 2.

  If the link is 'None' then send xml does not display these values. If the link is 'Normal' then the data will be returned.

  Good luck

  Niall

• Windows XP does not recognize the full HD 500 GB

  I have an old version of XP Pro. My HD crashed & installed 500 GB HD sees now only 128GB. BIOS sees 500 GB. I haven't made windows to & including SP3 updates still no change. What is the solution?

  Windows XP RTM can format only up to 128 GB - it took until SP1 (?) that the formatting of the larger disks was available during the installation.

  Your HD will have a large part of the unallocated space - you should be able to create a second partition using all that space, now that you have installed SP3.

  If you want a single system partition, then you need to extend the existing partition by using third-party tools or use a CD Pack of Service higher for installation.

• New installation of XP PRO sp3 does not recognize the 500 GB HD

  OK, here are the details:

  System: Computer PORTABLE of Acer Aspire 1700 Pent4, 2 GB of RAM, 80GB (3.5 "full-size, trainee) IDE HD [this is the original HD on this laptop of size important which is designed to use disks 3.5" hard].

  Initial situation: Windows XP Pro (SP3 integrated) installed on HDD of 80 GB and works without poblems. BIOS does NOT show the ability of the intern HD in the BIOS screen. BIOS reports only the model and the serial number of the HD, and there is no options to specify the HD type/format (e.g., MLA, etc.)

  Available: Win XP Pro bootable CD slipstreamed with SP3; It is tested and verified work well to install PC or laptop!

  When running XP Pro on a partition internal 80 GB HD, and when I join a brand new WD 500 GB IDE HD via USB, HD is recognized correctly. I can partition and copy data on the HD 500 GB with no problems!

  When I replaced the old 80 GB HD with the new HD 500 GB HD interning on the laptop, I have the following problems:

  1. I can NOT boot into Windows XP Pro (SP3) which was Ghost on the HD 500 GB of the old 80 GB portable HD it recharges, and if I try the console recovery or secure boot, then the laptop restarts also.
  1B. I have Ghost xp partition to 80 GB HD to a piece of spare HD (40 GB) and replaced the 80 GB with the 40 GB HD and was able to start the laptop without problem. So the problem is NOT related ghost!

  2. I can't perform a clean install of Windows XP Pro (SP3 integrated) because Windows XP Setup recognizes the HD 500 GB GB 131 HD. Therefore, the remaining capacity is not recognized.

  3. I can NOT perform the installation of Windows XP pro (SP3 integrated), even if I have previously partition new HD 500 GB by attaching it to a free desktop PC and use Partition Magic, partitioner of Paragon Disk or other partitioning tools. After partitioning prior, when the 500 GB HD is installed on the laptop (as a trainee HD), then win xp installation lists quality HD of GB 131 and lists the existing partitions as corrupt!

  4. Curiously, if I use Knoppix, Debian, Ubuntu or linux boot CD Mint and start the laptop computer with one of these linux distributions, then the linux installer recognize the HD properly during the phase of recognition of material and later during the phase partitioning HD, the linux system to report a full capacity of 500 GB available for partitioning. In addition, when there are partitions, partitioning linux program then lists these partitions properly as well!

  Considering the 4 points and especially MS Windows XP PRO (integrated with SP3, which should recognize HD with sizes exceeding 137 GB limit - from MS says you must be at least XP SP1 to overcome the size 137 GB limit - and that the different distributions of linux can see the full-size HD 500 GB with no problems) which is exactly the problem with Win XP? Why it does not recognize the full capacity? And how to win xp recognizes a 500 GB capacity, if the new HD is attached to the laptop via USB as an external drive when running XP PRO (SP3) of the 80 GB internal HD?

  so... Can anyone sheds light on the issue with Win XP Pro installation on HD 500 GB IDE?

  Nicely,

  LO

  Hi Palcouk and Doc,

  I think that's the final answer!

  Although, there is a mixture of simple to complex responses to the problem at hand, what it all comes down is that there is a significant difference between the installation of Windows XP and Linux installer program. The XP installation program needs help from the BIOS to deal with HD, and if the BIOS does not support, XP not has no facility to remedy the situation. OTOH, most of Linux new kernels rely on the BIOS for a limited number of extended, but communicate directly with the hardware, in this case, with the HD and therefore manages the material accordingly.

  It seems among users of dual-booting (win/linux) using old PCs, it is a matter of very pretty. What they end up doing is using the first 137 GB that is seen by the BIOS without problem for XP (either as a single partition or divided into several partitions), and the rest of the space is used for Linux because linux has no problem.

  I guess that it really nails the problem with my laptop to a BIOS NON-lba-48-bit!

  Then close this thread as answered or matter who has more to say about this?

  LO

  P.S.: It was very nice meeting you fellows and appreciate all the help and tech expertise.

• Tecra R850-11U does not recognize memory full

  My Tecra R850-11U has 8 GB (2 x 4 GB) memory inside. I am under W7 Professional 64-bit, and the machine shows that 4 GB of memory.

  I've updated the bios, but the bios display also 4GB. I have 2 banks of original samsung memory still a change to a Bank of kingston, but it displays no more than 4 GB.

  How can I solve this problem? I like the full memory

  The chipset supports 8 GB of RAM, so you should be able to use the 8GB.
  But if the BIOS does not recognize the 8 GB of RAM then one of the modules might be faulty or not compatible with another module.

  It is just as well as a plausible explanation for me

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• Fuze 4 GB will not recognize the change of information tracking

  Right then, I had some problems with my Fuze MP3 player. When I download the new music on the device, the ID3 tags all come out the way they are supposed to. However, if I remove the music that is on the drive and replace it with the same tracks with ID3s update, it will not recognize the change of title, album, or artist, if the song file will be updated. I know because I had problems with the songs with the same name or accidentally given songs the name of another song, which resulted in incorrectly labeled music.

  I tried to format the drive, I tried to remove the music manually in the file system, I tried to change the USB mode and delete the file that I said holds the ID3 data, and I tried all the possible permutations of disconnection and let the Player recognizes the changes. This includes the removal of all the music in the player, disconnection of the latter, confirming that there is no music on the system, to change the USB mode, deleting the file with the ID3 information, turning the rear USB mode, reconnect, put my music on the device, and the problems have not been resolved.

  It is likely, it is just to be fickety, and there is something I'm don't is not right, but it's the second "rocket" I've owned - I love the model and went up to return a Fuze + in favour of the former model - and one has never had this problem. I'm willing to try anything within reason to solve the problem, so I hope someone can point me in the right direction.

  In fact, the problem was not as expected at all. I think it turns the problem is Windows Media Player, which I only use to sync my music on my MP3 player, had a library with outdated information. So after the Player update multimedia, I refreshed my library recordings and everything worked as you wish. I just to make sure that if I make changes to existing songs in my library.

  Thanks for all the help, guys, guess it was on my end.

• HP officejet 6600 my laptop does not recognize the printer

  My laptop does not recognize the printer any longer. It will recognize the fax on the printer but not the printer itself. Can you help me? I have two currencies on my laptop. HP officejet 6600 and hp officejet 6600 network. Even printing for both. One network is the fax. I'm not clear what is the question. I can't even download drivers or updates for it.

  There are two 6600's in the list, a fax and a printer, because the full feature software and drivers have drivers for both. If you do not use the fax, you can remove devices and printers.

  A work print from other sources? For example Notepad?

• Laptop does not recognize the usb mouse or the internal speakers.

  The laptop does not recognize the USB mouse. I have re installed the drivers from the site of the constructor (HP), but it still does not work.

  In addition, the internal Laptop speakers no longer work. There is no sound coming out of the laptop and it does not recognize the external headphones plugged into the headphone jack.

  I ran several troubleshooting utilities (audio playback, FixIt) and they are no help.

  Hello

  Thank you for keeping us posted.

  Sorry for the late reply.

  I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  How to use the tool File Checker system to repair missing or corrupted system files,

  Please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the system (SFC.exe) to File Checker tool analyzes your system files and to repair the system missing or corrupt files in Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  If the problem persists, follow method 2

  Method 2:

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft, security scanner please follow the steps in the link provided below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.   

       

  If the problem persists, follow method 3

  Method 3:

  I suggest you try the steps from the following link and check if it works.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For the problem with the USB mouse, there could be a possibility that there is a conflict of material with the mouse.

  I suggest you to try some other USB mouse with the laptop and check if it works.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• Aurora R1 do not recognize the internal drive of 6 TB

  I am unable to get my Aurora R1 to recognize the full capacity of an internal hard drive from 6 to.  Reading the forums, it seems that this could be possible by making a "data disc" in the GPT format.  I have to format GPT to see even less available 2 TB.  How can I make my drive a "data disc" such that I can use the complete 6 TB?  I am using Windows 7 64 bit, i7 930 & Bios A11.

  For some reason, I thought you already had the latest version of Intel-RST.

  Yes, by all means... update to the latest version... run the latest version or run without him completely.

  If you go to the screen "Version", and it's called something like "Intel rapid storage technology" then that's what you want:

  File name: SetupRST.exe
  Version: 13.2.4.1000 (latest)

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24293&lang=eng&ProdId=2101

  However, if it's called rest or you see the word Enterprise, you need a different version (for easy upgrade).

  Just a reminder... save your C: drive before playing with Intel RST. Things can go bad pretty fast. On the desktop, I use SSD instead of RAIDs and try NOT to use Intel-SLI at all.

  Since it is already there, and you can't really uninstall it, so update it and see what happens. It would be interesting if she finally got a goal on systems non-raided. Try this before you try the DiscWizard (and eventual insertion of pilot Acronis).

  I've always had this opinion of Intel-SLI. However, I found this on a knowledgeable Pro (in terms of HARD/NAS/RAID drive) post on the forum:

  Benefits of the TSRI software installation:
  1 AHCI and RAID: followed by some details about the readers, who are related to the resp. Intel SATA AHCI RAID controller

  2. only RAID: creation, repair and modification of a RAID array in BONE

  3. only RAID: activating the feature 'Write Back Caching' (help from the performance of writing in RAID mode)

  Disadvantages of the TSRI software installation:

  1. the extension of the start date

  2. other demand for resources (the TSRI Service usually runs permanently in the background)

  3 possible increase of the instability of the system (some versions of software TSRI have serious bugs)

• Why the database do not recognize the statement_id that already defined?

  Why the database do not recognize the statement_id that already defined?
  

  SQL> explain plan SET STATEMENT_ID='HR' for select*from employees where salary>10000;
  
  Explained.
  
  SQL> select*from table(dbms_xplan.display) where statement_id='HR';
  select*from table(dbms_xplan.display) where statement_id='HR'
                                              *
  ERROR at line 1:
  ORA-00904: "STATEMENT_ID": invalid identifier

  Set it as parameter to the function.

  conn hr
  password:
  
  SQL> explain plan SET STATEMENT_ID='HR' for select*from employees where salary>10000;
  
  Explained.
  
  SQL> select*from table(dbms_xplan.display(statement_id => 'HR'));
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------
  Plan hash value: 1445457117
  
  -----------------------------------------------------------------------
  | Id  | Operation         | Name      | Rows  | Bytes | Cost (%CPU)| Ti
  -----------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |           |    68 |  4624 |     3   (0)| 00
  |*  1 |  TABLE ACCESS FULL| EMPLOYEES |    68 |  4624 |     3   (0)| 00
  -----------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------
  
     1 - filter("SALARY">10000)
  
  13 rows selected.
  

  Published by: jetq on May 1st, 2010 13:30

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?