Horizon 6 and Server 2012

Similar Questions

• What version of esxi supports Windows 8 and Server 2012

  We have ESXi 5.0 and vSphere 5.0.

  I want to make the smallest upgrade for our VMware supports Windows 8 and Server 2012.

  What upgrade do I do?

  According to the matrix of product interoperability VMwarevCenter Server 5.0 (without update) supports ESXi 5.0 Update 1 guests too.

  André

• With server 2012 POS file level restore

  When I run a backup on a virtual machine running Server 2012 and then try to navigate this image to the file level using the Data Protection restore vSphere Client, I can't do it. I can ride with success and can see the image, but when I try to extend down to the level of the file I can't do. When I get the images running Server 2008 R2 however, I can browse to the level of the files without a problem. I was wondering if there is a problem of compatibility between the Data Protection of restoration of Client and server 2012? Also, as a quick add, I can restore a server running VM 2012 using the full image, so backups work fine on the 2012 VM server. It would just be nice to be able to navigate and file level restore. Any help with this would be greatly appreciated!

  This is probably a limitation around file systems THAT VDP currently support for FLR. Please see page 74 of the VDP Admin guide:

  http://www.VMware.com/files/PDF/products/vSphere/VMware-vSphere-data-protection-Administration-Guide.PDF

• DPM 2007 and windows server 2012

  32 bit System Center dataprotection manager 2007 can use windows server 2012?

  I installed the recommended updates - file DataProtectionManager2007-KB959605 and x86_DataProtectionManager2007-KB970868, but I can't install dpm on windows server agent 2012

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Or here at TechNet Data Protection Manager - File Protection:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=dpmfilebackup

  TechNet forums of Data Protection Manager.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=dataprotectionmanager

  See you soon.

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• We license from microsoft windows server 2012 and I want to install Windows server 2008. Is this possible?

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Thumbnail option does not work in Terminal Server in Windows Server 2012 and server session

  This might be a stupid question.

  We have two Windows server 2012 R2 - TS and DC. The clients are connecting to TS and access the shared network drives present in DC. I always unchecked 'show icons, never thumbnails' and 'Show thumbnails in System Properties' enabled on DC and the two TS.

  No always thumbnail option.

  You will need to click on each image. Users have many files containing multiple images. It's annoying to click and view each image.

  Note: NO GPO is configured to block it. Checked.

  I can't find any object GPO to allow this option to be :)

  More info. For customers, anywhere, whether network shares or all folders in TS session. It does not work. Also tried painting and Windows Photo Viewer.

  Here, any help will be very appreciated!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 reboot w/dump (Standard Edition 64-bit (English)): w / a) CA ARCserve Backup version 16.5 b) JAVA JDK 1.7.80 c) Tomcat 7.0.59; Unexpect error and restart w/dump?

  Windows Server 2012: unexpected system error and restart w/dump?

  With the software running:

  (a) CA ARCserve Backup version 16.5

  (b) JAVA JDK 1.7.80

  (c) tomcat 7.0.59;

  (d) Symantec Endpoint Protection Version 12.1

  (e) PowerChute Network Shutdown 3. 1.0

  Should I plan to restart (I can only remote access) server for every 2 months?

  Running (without rebooting) non-stop over 6 months ago.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Support for WMI 1.5 tools on Server 2008 R2 and Server R2 2012

  We currently plan to migrate tools WMI 1.50.1131.0001 on Server 2008 R2 and Server R2 2012. The application is compatible on the aforementioned platforms?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• New to 8.1 and wanting to run Hyper V and 'try MS server 2012 ".

  Hello

  Built a new PC and dropped in Enterprise 8.1... added Hyper v and downloaded the copy 'try' MS Server R2 2012.

  I pulled the low R2 for Windows Server 2012 on the Technet Evaluation site and got the package: 130928-2229_server_serverdatacentreeval_en-us. VIRTUAL HARD DRIVE

  I got going and he ran a few days (course worked very well, taking 70-410) then a few days later, I just clicked and deleted the instance of the virtual machine in the Hyper-V Manager because I wanted to change the config was not drives or anything else - error 1

  Tried to re - install again and, of course, no joy, tried a few things and vain for 2 days, now this morning spent half a day, re-installation of 8.1 again to try to get the D/L will again... I see little thing Assistant account of that 8.1 restored my profile so maybe that's why the Hyper V ALWAYS failed to load the virtual hard disk.      Just a guess...  Error 2?

  Back in the new Hyper-V install this morning in the reinstalled 8.1 and STILL get the error when I try again:

  -Open the Manager Hyper of V

  -Machine virtual acts-Import

  -Dialog wizard - following

  -Locate the folder - new folder on the hard disk

  -Put in the path = C:\ HyperV files (there is a copy of 130928-2229. *.) Disk virtual hard in the folder)

  -Then click on select file-

  S ' poster in the path = C:\ HyperV can - next

  -Get the Assistant barf:

  Hyper-V not found of VMS to import from location "C:\HyperV Files\".

  The file "C:\ HyperV Virtual Machines\' is not found.  You might not have permission to access.

  So, it is always throwing the error because I crashed two days when I deleted the original installation of work I guess.

  Then it's because I've used the file 'try' once and I pooched when even I have re-installed 8.1?  Or is it a combo of 8.1

  Assistant to put something in the drive?  Or can I go back and re - define something from the test site, or what?

  I have now lost 3 days fart around this problem... am I pooched?   I do not have a complete MSDN Dev account so that I could

  probably manually install a copy of the R2 2012 legit keys into a new virtual machine on PC, but y at - it another way

  for the evaluation copy go even faster!

  Cheers

  Dave

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Unable to see disc _share local (LAN) and pc server 2012

  Hello

  We have windows server 2012 and almost everything works well.

  We have installed AD and domain controllers, but we use it domain controllers.  We use mainly for the RDP connection.

  What we try to do, is that other users on the same network can see the configuration of file sharing on windows 2012 but without success

  they see all devices network but not windows 2012... they see even our old Server 2003.

  I'm banging my head for almost a week to fix this.

  and also, the w2012 server sees not all devices of local share

  the firewall is disable and sharing is enabled for pubic hair on w2012.

  is there a gpo that blocks or something else

  the fact that he isn't is on the same workgroup (but 2003 is on various working groups and others can see see this server)

  any guide or clues because I am out of ideas and I'm ready to throw my server because of this :(

  Thank you

  Hello

  What you ask, it is beyond the scope of these Forums.

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• What is the forest and the minimum area required for cloning a domain controller in Windows Server 2012?

  Please let me know the level minimum forest and domain functional, required for the RODC cloning Windows Server 2012...

  Hello

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

• I downloaded Windows Server 2012 and don't remember my password.

  I WENT TO MIRCROSOFT.COM OR TECHNET AND DOWNLOADED WINDOWS SERVER 2012

  AFTER MAKING A PASSWORD FOR WINDOWS SERVER 2012 WHY WOULD TAKE ME TO THE COMMAND PROMPT

  AND I DON'T CHARATER UPPERCASE LOWERCASE AND SOME HAVE BEEN USED IN MY PASSWORD

  THEN, AFTER THE COMMAND PROMPT, I HAD TO RE INSTALL WINDOWS7 BACK BECAUSE I DON'T HAVE

  WHAT MAKE OF THIER MY GUESS IS DONE I HAFT TO TYPE SOME SORT OF COMMAND

  I JUST WONTED TO SEE WHAT WINDOWS SERVER 2012 RESEMBLED

  WAS THE ONLY REASION WHY I USUAL TO DOWNLOADED

  IM NEW TO THE SITE AS WELL AND I WAS HOPEING YOU COULD YOU PLEASE E MAIL ME WITH

  THE REASON FOR THE ANSWER I DON'T KNOW WHERE TO GO TO GET MY ANSWER IF IT WAS GOING TO BE PUBLISHED

  ON THE WEBSITE IT SELF INSTEAD AND YOU ALL DON'T RE NOT PLAYING PEOPLE BY

  SO here IS MY EMAIL ADDRESS * E-mail address is removed from the privacy *

  Hello mimi azzedine,.

  I suggest posting your question on our TechNet forums located here:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works