HP Officejet 6310 all-in-One: Officejet 6310 'door open' error

Similar Questions

• Black cartridge HP PSC 950XI all-in-One HP 78XL mark stop error messages.

  Black cartridge HP PSC 950XI All - In - One HP 78XL mark stop error messages "" error: installed incorrect color cartridge ";" "" Install the color cartridge"and"install the color cartridge. I cleaned the contacts on the printer and cartridge and printhead. Cannot make it work.

  I've tried everything and still get error messages that continue to change so I can say that things are get cleaned but this cartridge is just not good. I ordered more than HP 78 and 78XL cartridge. If they show mistakes I'll let you know. Thanks for the suggestions, there was one that I had not tried before so I will certainly remember.

• C6280 all-in-one: I can't open the C6280 solutions Center.

  I can't open the solution Center. My computer is doing some updates (Windows 10) a few weeks before. I tried to reinstall the software (C6200) for C6280 all-in-one at least 2 times and but it won't open. The driver are ok. I ran print and scan of the doctor, it's not shpw all bit errors. So, what's the problem?

  After that I made my post, I found the solution in another post.  I'll copy what I found.  This is not my original work.

  The problem is with the last Windows security update.

  Enter "view installed updates" in the search bar of windows left in Windows 10.  It will take you to an option in the control panel.

  Click the Option shown

  Select the "update of security for Microsoft Windows (KB3132372) highlight and then uninstall it.

  This should be all it takes.

  I just set the solution Center on my computer.

  Thank you

• printer all in one HP psc 1315xi - cartridge error message

  I recently bought a used hp psc 1315xi all in one printer.  The printer is in very good condition and came with a HP 27 black inkjet print cartridge and a tricolor HP 28 inkjet cartridge.  Both cartridges are half full (my computer can read the levels until I try to print).  However, when I try to print something from my MacBook Pro an error message that says the black print cartridge (and then soon followed by cartridge three colors) is not compatible with the printer.

  I checked the cartridges, and certainly they are supposed to work with this printer.  I tried cleaning and even uninstall the printer from my computer software but nothing has worked.  I don't understand how the printer can read how much ink is left in the cartridges but goes on to say that the cartridge is not compatible.  Please help me.  I don't want to buy new cartridges and it just happen again (and be $50 more poor).

  Thank you!

  Hello

  I totally agree with you.

  If you are in the United States, please call HP for Technical Support and you may be provided with the option to upgrade to a printer.

  Please call the HP Technical Support for assistance.

  If you are in US, the toll free # is 1-800-474-6836.

  If you are not in US , then log on to www.hp.com , bottom left it is an icon of the world map, click it, then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• L7780 All in One – Windows 7 Clean install - error when printing

  I have a huge problem with a failry new L7780 all-in-one. I has stopped printing from my laptop. I have recently upgraded to Windows 7 with a clean install of Vista... ergo I formatted the drive and reinstalled Windows 7. And now every time I print I get the following message "the job failed because of an error on the printing system.

  The printer is selected by default.

  The printer connects wireless on my network and appears on my connected PC. However, once I press print after a few seconds it seems to disappear.

  I did change all network settings and the MAC address is off on my router. It worked well on 2 home pc running XP, worked fine with Vista. And its only present a laptop with Windows 7 that cannot print on it for some reason any.

  However, sometimes when I stop... all of a sudden it prints what I asked 30 minutes ago.

  I tried the drivers installed and reinstalling.

  I tried forced start-up.

  Stop at the outlet.

  Reset the network adapter.

  I can only think at this stage there is a compatibility issue with Windows 7.

  Clues? Any help anyone can offer.

  See you soon,.

  Steve

  If it looks like your question:

  After you install the product on a network, you turn off the computer, and then, and the product loses functionality. The product is no longer prints and disappears from the icon of the product in the menu devices and printers in Windows 7 (64-bit).

  Try this fix:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-89191-1&LC=en&DLC=en&CC=US&OS=4063&Product=4022343&sw_lang=

• HP Pavilion all-in-one 200 pc: unknown device error

  Hello

  I can't update all devices, the following problem

  unknown device error.

  Hardware ID are:

  ACPI\TE8715

  * ITE8715

  Location on Intel ICH10 LPC Interface Controller 3 a 18

  unknown deloper, no driver available!

  Thanks for the tips.

  Hello:

  This is your ITE CIR receiver.

  Unfortunately, I do not know where you can find a W7 driver for it.

  Try Windows Update of the device - automatic driver search.  Be connected to the internet.

  Description of the model you posted draws upward of way too many models for me determine which one you actually.

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• My c7280 all-in-one tells me to "open the door, clear cartridge Jam".

  -J' tried the doors and came out all ink cartiridges... which door? and what I am doing wrong?

  Since the error message you received, I see you have a transport problem Jam.  Have you looked inside the printer, to the right of the cart that contains the ink cartridges, to check that it is not a small amount of paper in the printer?

  Thus, there are additional steps to troubleshoot a carriage jam, found here, in the document provided by HP.  I hope this helps.

• HP photosmart all-in-one - printer is in an error state

  When I try to print a pop up says that your printer is in an error state

  printer will copy and scan.

  fhopper wrote:

  When I try to print a pop up says that your printer is in an error state

  printer will copy and scan.

• all-in-one Officejet 5610: cannot scan

  I am trying to scan on my officejet 5610 all-in-one and I get an error insall for windows 8 or 8.1.  Help please.

  Hello

  Please download and run the following tool and post back all the error messages:

  http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-6/HPPSdr.exe

  Kind regards.

• HP Pavallion 22-a113w: how to open my Hp 22-a113w touchscreen all-in-one to add memory?

  I want to add more memory to my HP all-in-one, how can I open it upwards to do this?

  Thank you!

• HP Photosmart C6280 all-in-One: receives the error message, oxc05d0082, motor pump at a standstill. I have a C6280.

  Screen error bedxc05doo82, engine of the pump at a standstill.  Press the icon (inability to recognize or describe).   How to fix it, or can I still fix this?

  Hello @Munga,

  Welcome to the forums of HP.

  I understand that you have found an error ' 0xc... "on your printer.

  I would like to help.

  Try to go through the following document.

  ' Printers HP - "Problem with print head", "printer failure," 'Ink system failure,' or a ' 0 x ' r a 'C2 '.... "Displays Error Message

  On the off chance that you meant 'choose the motor at a standstill', please see the following document.

  HP all-in-One printers - 'Out of Paper' error and the printer is not get paper

  If you need other assistance please let me know.

• ENVY 100 all-in-one: Envy 100 printer all-in-one - will not glossy paper 250 gsm

  Difficulties that the printer will not accept 250 gsm paper past the printhead.

  Followed him orders for cleaning rollers, reset by disconnecting the power and brought etc. cartridges.

  I note others have had the same problem which seems to have been set by a semi of hardware reset. How can I get the required for the semi reset procedure?

  Thanks in advance.

  Welcome to the @noxasforums.

  I saw your post about your Envy 100 not pulling by glossy paper 250 gsm and wanted to answer you! I checked the specs for the Envy 100 and as you can see below, the printer should take in if you use a format supported below. Maybe you can try the steps from the link I posted for you. I think the cleaning rollers should help. You can also try to select different types of paper to see if one works better than the other.

  Let me know what happens!

  • HP ENVY 100 (D410) and 110 (D411) e-all-in-One Printer Series - 'in paper' Error Message displayed the ENVY and the printer isn't looking upwards or the paper feed

  Tip: Make sure that the printer is plugged directly into a wall jack, avoiding bars power and surge protectors. This ensures that the printer is full on.

  

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• Printer error 0x610000f6 General on Photosmart all-in-one C309n

  Whenever I print, I get a general printer error on my HP Photosmart all-in-One Touch Smart C309n; the error number is the same every time: 0x610000f6.  I have to press OK on the screen of the printer to empty before printing again.  Sometimes it will show all the work until the error comes up, but other times it will bring up the error after the first page, and I have to turn it off to get the rest of the print job done.  Help, please!  Thank you!

  The code you get is normally caused by an ink system failure, but those who won't let you push OK to get in front of them. Your printhead may be out. The print head would be out of warranty now, as is the printer, so the only thing you can do is to try to clean the print head. The document following the link will take you through the steps of cleaning and aligning the print head. The place in the document that tells you the following steps are labeled step 4 and step 5 under Six Solution in the document. If the message continues to rise, you may need to physically clean the print head. The steps to do this are in a post from Bob_Headrick. She is tied below the document mentioned above.

  Print quality:
  http://goo.GL/dZvCV

  Bob_Headricks steps to physically clean the printhead:
  http://goo.GL/DfroJ

• I downloaded my camera photos to "my pictures", but they are separated. How do you put them all in one folder?

  original title: My Pictures folder

  I downloaded my camera photos to "my pictures", but they are separated. How do you put them all in one folder?

  Open my pictures. File | New | Folder and create a new folder. Hold down the CTRL key while you click on all the pix for highlight and drag them into the new folder. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA