Horizon solution - Licensing Disapering after reboot.

Similar Questions

• RN204 not reconnect the USB in the port back after reboot.

  I don't know if that's a problem, but my new RN204 unit will not see my USB stick after reboot. Key, I inserted into the lower back USBport. Port superior return I got UPS. Inverter is connected ok after reboot.

  If the USB is in front of USB port, unit connects OK after reboot. Rear ports, I have to go out and re - insert USB stick after every reboot. Key is detected and mounted after rehabilitation only. (connected external storage device.)

  USB drive is Kingston USB 3.0 and my RN104 unit detects that it restarts after all in backport more or less right. (after a reboot it tell me automatically (connected external storage device.))

  FW on the two unit (RN204, RN104) is 6.4.1 - T35, tested on 6.4.0 and 6.4.1 beta 1-2 - all the same.

  Hi all

  After you install the new version of FW 6.4.2 (Final, published today), everything looks OK. My RN204 unit reconnect all the USB key, that I tested.

  Everything is OK, the Bug disappeared. I think that FW 6.4.2 is the solution to the issue being reported.

  Thanks Netgear.

• The calendar settings reset after reboot

  Hello

  Could someone please check if you have the same problem on your phone?

  Sony calendar resets the settings after reboot.

  For example, if I put "week begins on ' = 'Monday' and restart the phone, this setting will return to 'Sunday' (which is the default).

  I am now running Calendar 20.0.A.2.5, but I think that this bug existed before as well (even on my old V Xperia I think)

  P.S. I found this subject, but I did not understand the solution correctly or it does not work for me... I tried to disable the calendar app, but it did not help somehow...

  There were improvements made on this subject and if you update the 23.4.A.0.546 phone and use the latest Google Calendar app I hope not to have this problem more.

• Automatic deployment: vMotion turning off after reboot

  Details of the environment:

  vCenter 5.5 build 1750787

  Image: ESXiu2 build 2068190

  With the help of vSwitches standard

  vSwitch0 - contains exchanges VM

  vSwitch1 - contains 2 ports vMotion

  vSwitch2 - contains 1 management port

  (I know, it's silly, but it was done this way to conform to virtualization as a platform of services)

  It is all set up in the profile of the host and after reboot, it shows 'host unenforceable contract... '. «and «rendering of the services not enabled...» "- I found the following link: http://www.core-four.info/2014/03/vmotion-not-getting-enabled-on-vmkernel.html but we do not use network coredump so this workaround is a no-go.

  I wanted to add the solution. I looked through the logs of boot and discovered that he had a conflict with some of the parameters when starting. In particular the IPv6 settings were great capricious and caused a kernel panic (sort of) which caused the ESXi host to cease to apply the profile.

  TL; Dr. look auto deploy newspapers (on the host and vCenter)

• WebLogic Admin server fails to start after reboot

  Hi gurus,
  
  WebLogic Admin server starts after a reboot of the server. Note that weblogic has graciously stopped before restarting.
  
  Also note that the following files have been accidentally deleted after reboot (but I don't think that that should cause a problem..):
  / opt/Shared/Apps/Hyperion/Oracle/middleware/user_projects/Domains/EPMSystem/Servers/adminserver/Data/Store/default/_WLS_ADMINSERVER000000. DAT
  / opt/Shared/Apps/Hyperion/Oracle/middleware/user_projects/Domains/EPMSystem/Servers/adminserver/Data/Store/Diagnostics/WLS_DIAGNOSTICS000000. DAT
  
  
  Looking at the AdminServer.log:
  
  
  * # < 11 October 2012 11:27:53 CEST > < critical > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969273846 > < BEA-000386 > < server subsystem failed. Reason: java.lang.AssertionError: weblogic.management.provider.EditFailedException: *.
  java.lang.AssertionError: weblogic.management.provider.EditFailedException:
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:79)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
  at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
  at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
  to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:83)
  at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
  at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
  at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
  at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: weblogic.management.provider.EditFailedException:
  at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1754)
  at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:76)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
  at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
  at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
  to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:83)
  at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
  at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
  at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
  at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: org.xml.sax.SAXParseException: premature end of file.
  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195)
  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:174)
  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:388)
  at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1414)
  to com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$ PrologDriver.next (XMLDocumentScannerImpl.java:1059)
  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140)
  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:808)
  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
  at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:235)
  at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:284)
  at weblogic.xml.jaxp.RegistryDocumentBuilder.parse(RegistryDocumentBuilder.java:163)
  at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
  at weblogic.management.provider.internal.ConfigReader.convert(ConfigReader.java:106)
  to weblogic.management.provider.internal.ConfigReader. < init > (ConfigReader.java:70)
  to weblogic.management.provider.internal.ConfigReader. < init > (ConfigReader.java:64)
  at weblogic.management.provider.internal.EditAccessImpl.loadBeanTree(EditAccessImpl.java:1917)
  at weblogic.management.provider.internal.EditAccessImpl.loadBeanTreeFromPending(EditAccessImpl.java:1807)
  at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1740)
  at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:76)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
  at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
  at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
  to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:81)
  at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
  at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:232)
  at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:154)
  at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:26)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  
  
  # < 11 October 2012 11:27:54 AM EDT > < opinion > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274051 > < BEA-000365 > < changed failed State Server >
  # < 11 October 2012 11:27:54 AM EDT > < error > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274053 > < BEA-000383 > < is not an essential service. The server will shut down >
  # < 11 October 2012 11:27:54 AM EDT > < opinion > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274069 > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274138 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274140 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.edit. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274141 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.runtime. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < WebService > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274146 > < BEA-220028 > < Web Service reliable agents are suspended. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < WebService > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274153 > < BEA-220029 > < Web Service reliable agents are shut down. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < MessagingBridge > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274318 > < BEA-200001 > < messaging bridge has shut down successfully. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274426 > < BEA-040308 > < service JMS suspends >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274506 > < BEA-040107 > < 8 cancelled by default connection factories. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274510 > < BEA-040015 > < stop JMS is done >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274530 > < BEA-001144 > < Force suspending the JDBC service. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274536 > < BEA-001146 > < Force suspend the JDBC service finished >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274538 > < BEA-001147 > < JDBC service stop. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274552 > < BEA-001149 > < stopping the completed JDBC service >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274694 > < BEA-000236 > < stop run > discussions.
  .....
  
  
  Kindly guide me with this. Thank you!
  
  Published by: Kent Pawar. October 11, 2012 08:51

  It is:

  Caused by: weblogic.management.provider.EditFailedException:

  A likely reason may be a few changes in the config.xml file. If you have a previous backup of the config.xml file, then try to replace the config.xml file, and then restart the server.
  Another reason for this exception maybe it were completely a few changes to the configuration through the administration Console that were not activated and the server administrator has been restarted. According to this scenario, weblogic will create a dir /pendig and have a config.xml file is created with the changes unchecked.

  a solution of workaround that you can try to restore the management server:

  Under domain dir.
  \pending directory - take backup and delete the directory.

  Under Dir Admin Server:
  data\store - take backup and delete the directory.

  Thank you
  Sandeep

• Install PRE &amp; PSE V12 fails repeatedly even after reboot

  I have a working installation of

  • 5.3 Lightromm
  • Photoshop elements V11
  • First Elements V11

  on a PC running Windows 7 SP1.

  After the purchase of a new licenses of PSE & PRE V12 succesfully downloaded and unpacked all the files.

  but Setup process fails even after reboot and recovery point.

  

  Hello

  Please try to install the software with a new administrator account. A new local administrative account can exclude network strategies, corrupt profiles and configure administrative accounts: http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-7

  If the error continues to appear, restart Windows in modified mode, and try again to install 12 elements: http://helpx.adobe.com/x-productkb/global/restart-windows-modified-mode-windows.html

  Concerning

  O´Neill_SG1

• El Capitan keyboard does not not after reboot

  I have a Macbook Pro 13 inch with OS X El Capitan 10.11.6

  After one of the recent improvements, I met a problem, if I take my mac, the keyboard and the trackpad to respond enough lag (if I constantly try to move the cursor, he'll have a time and then for like half an hour it will completely stop responding and after this the other repeats). It only happens after reboot and only on the login screen. So if I put my mac to sleep and then wake up, everything will work perfectly. Same thing if I managed somehow to connect, once the keyboard and trackpad respond correctly. The only button that works fine after reboot is the power button, but it doesn't help much, because it charges does not solve the problem somehow: as soon as the user selection screen, keyboard and mouse stops responding again (or should I say "start answering from time to time").

  I saw lots of questions here on the keyboard does not not after waking up, but as you can see, this isn't my situation.

  Try again in Safe Mode.

  Start up all by holding down the SHIFT key. It takes five minutes longer because it is a disk first aid on the way up, and you MUST provide your user name and password, even if you normally the automatic connection.

• Not ready external hard drives after reboot

  You have a weird question, or perhaps I should say one on that I can't find something. I've dealt with it for years and finally had enough of it. Rarely, I restart my Mac, do not need, is not something that happens often. But on the question.

  I have an iMac of 2015, internal SSD, or merge, I suppose, and a couple of external hard drives attached. Both are 4TB readers, by USB (for backups) and FireWire (for data, applications, iTunes library, photos, etc.). Both work perfectly during normal use.

  The question is when I reboot. My hunch is that these external drives are not fill their mental health checks / faster the drive internal system files, and when the OS is logged in, all the stuff on my external drives (in this case, my iTunes library) is not found. Of course, everything I do is point iTunes to the external drive and everything is fine (well, that and tell him where to find my wallpaper because it doesn't by default mountain landscape photo!).

  So I'm wondering - is there a way to delay the start of the BONE or the final control until external drives are online? Not a huge problem, but why not. I'm tired of fixing stuff when I reboot. Or else, is something to not configured right and the cause? Hmm.

  What do you say?

  Try to connect the external disk after reboot completed if he could climb.

• Can't use Firefox once after reboot my Mac, then he won't.

  After reboot or a total, followed by the setting stop running, I get use of Firefox. Once I close out of it, I can't hire back in.
  I checked and updated Firefox, no help. I am currently running Yosemite on my Mac.

  I tried a Force Quit on Firefox. Notice that the small point under the Firefox icon is missing. So, I then clicked on the Firefox icon and it has jumped up and down. Alto! I can now engage Firefox without having to restart my computer. So does that mean Firefox did not leave on its own? And why all of a sudden start. Inquiring minds. If with that I seem to be OK once more. How weird.

• My computer crashed and after reboot, I lost all my saved passwords. How can I recover it?

  I was looking on a saved password when suddenly my computer crashed and restarted. After reboot I couldn't see the saved passwords.
  As a test, I saved a password and this password is displayed in the list of saved passwords, but all the others are still missing.
  How can I retrieve my saved passwords?

  Thank you!

  If the file has no valid data then you may not use this file.

  You can try if there is an earlier copy of the logins.json file.

  • Right click: properties > Previous Versions
  • http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions

• Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Occasionally, it may restart because something was wrong. It is not a problem unless this happens frequently.

• delay connection remote control Apple tv siri after reboot

  Hi, when I restart my apple tv, remote siri doesn't respond for like 1 minute

  does anyone have this problem on reboot?

  Once my remote siri has not connect after reboot and I had to unplug my apple tv so she reconnected

  Please can someone he try on his apple tv 4, to check if there is a delay in the remote siri connection after restart of the apple tv

  Thank you

  Probably for about 10-15 seconds here.

• Gel downloads Firefox on 1 second after, after reboot download again (safe mode)

  This is starting to happen after the update from 28 to 32 (not sure about 28).

  1. download whatever it is
  2 download is complete, the Download Manager (default or any plugin) still have this file fixed on 1 second
  3. I can't cancel, press 'x' pause.
  4. when I leave Firefox it asks, "cancel 2 downloads?
  4. after reboot it starts to download this file again. But now I can cancel it.

  http://oi58.Tinypic.com/2emzyw2.jpg

  Tried in safe mode, same result.
  Downloads are kept in the downloads.json, I can remove them manually to prevent the download again after the reboot.

  You use the version of Firefox 32.0 or the 32.0b9 who had this bug not download complete

• 29 Firefox: toolbar guard reset after reboot

  Hello

  I use Firefox 29 since the first beta, and I did several customization menu. But if I take the 'Star + favorite' icon to the next restart I find in its default location (that is, before the menu button).
  Other items added to the toolbar disappear after reboot as well.

  I tried to return to default and the problem persists.

  I also tried to delete the localstore.rdf file and the problem remains.

  The problem is somehow similar to the following

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=854226

  I prefer not to create a new profile since I many extensions, so I ask if there is another file, containing these customizations, what I could try to remove it.

  Thank you.

  Underpass, I'm sure you're problem is caused by one of your modules.

  Can you try to pin-point the offending module? I would suggest the following method:

  1. Cut the half of your add-ons (disable in the Add-ons Manager) and restart Firefox.
  2. If the problem is still there, turn off half of the other add-ons and restart Firefox.
  3. Continue step 2 as long as you can reproduce the problem.
  4. If the problem in not there anymore, the offending module is among the list you just disabled and should be easier to find.

  Thank you!

• Can not see my own account after reboot

  After reboot I can only see the original user on my Mac + comments, but not the one I added.

  The original is my wife so if it connects inn, first of all, I'm able to move my user by logging out (users obtained all visible) or by selecting my self in the menu to the left of the projector users.

  Upgrade to 10.11.4 to see if there was a problem with 10.11.3 who was present when the account is added.

  It's annoying to sort of not finding your own account and I wonder what's wrong.

  Anyone with an idea?

  Hello dusanofrode,

  Thank you for contributing to the communities of Apple Support.

  If you cannot connect to the original account on your MacBook Pro, looks that FileVault has been activated. It encrypts the bootable floppy and requires that the original to "unlock" before user other users can subscribe in their user accounts. I can see how that might be irritating in the circumstances, and I have a few suggestions to check the situation and helps connect you to your account a little more quickly.

  To see if FileVault is turned on, connect to the user account of your wife and choose the Apple menu > System Preferences, click on Privacy & Security, and then click FileVault. You can find more information about FileVault in Use FileVault to encrypt on your Mac startup disk.

  If FileVault is turned on, you have two possibilities to be able to connect to your user account to start.

  • "Activate" your user account to connect to start up the Mac. You can do it in the preferences of FileVault (located under Security and confidentiality in system preferences):

  Allow users

  Click to enable users to log on at startup and unlock the encrypted information on the Mac. Users who are not enabled need an administrator to log on before you can use the Mac.

  Of OS X El Capitan: FileVault pane of security & privacy preferences

  • Turn off FileVault:

  When you turn off FileVault, the encryption is disabled and the contents of your Mac is decrypted. Decryption may take some time, depending on the amount of stored information. However, you can still use your Mac to perform other tasks while the information is that is decrypted.

  1. Choose the Apple menu > System Preferences, click on Privacy & Security, and then click FileVault.

  2. Click on the lock icon to unlock, then enter an administrator name and password.

  3. Click on turn off FileVault.

  4. Click on disable encryption.

  Of OS X El Capitan: turn off FileVault encryption

  All the best.