Horizon view license constraints

Similar Questions

• Scenario of horizon view licenses

  End-user settled "on-the-job training" to show off their software to potential customers. Will be a maximum of 130 'students' to connect to the environment at a given time.

  Part the trickiest is - due to the software, they strive, each "pupil" should be connected to two desktops at the same time, but using the account from 13:00 (if possible).

  Does that mean they need to license for 260 concurrent connections, or are they OK with 130 simultaneous licenses to see?

  Given that VMware View is allowed on the "connected at the same time office" you need 260 licenses in this scenario.

• Upgrade from 6.0 to 6.2 horizon view

  Hello

  I will update 6.0 seen Horizon to 6.2 in two weeks. I read the guide 6.2 upgrade and have my flattened upgrade plan, more or less.

  Now that I'm not sure of the East (this is the first time that I am ignorant version), is / was there of any changes from 6.0 to 6.1 which must be taken into consideration, but is not mentioned in the guide to 6.2 day?

  Also, I currently don't have implemented SSO implementation. How the look of the task would get SSO running? Think to implement SSO before the update... one thing at a time...

  High level of questions, I know. But I am happy to provide more details if it is necessary.

  Thank you

  The date of issue for Horizon view 6.0.1 6.0.2 6.1, 6.1.1 in detail what is included in this version.  The release notes for 6.2 will include shades or known issues related to the upgrade to this version.

  It does not appear that the upgrade from 6.0 to 6.2 is supported.  Page 11 of the upgrade guide indicates that the 'latest version of VMware Horizon 6.0 (with view) maintenance, which is 6.0.2"is the supported platform that allows to upgrade.

  Also, when the upgrade of your Agent view, uninstall existing agent, restart and install the new agent of 6.2.

  Check the Product Interoperabiity matrix to ensure your versions of vSphere and vCenter are supported in point 6.2.  Also, do not forget to check your version of DB is supported in 6.2 (for the composer and DB events) here.

• Horizon View Client does not work after upgrading to Chrome OS 45

  Is there a known issue with Chrome OS version 45?

  My client view Horizon worked without problems, but after upgrading to Chrome OS 45, the Horizon view app starts with a white screen which shows just the logo of the view of the Horizon in the middle. Nothing happens. I can't connect to a server or start a virtual machine, it is also not possible to do any configuration. I rebooted my Chromebook, uninstalled, and reinstalled the client Horizon view. Nothing helps...

  I'm working on a Pixel 2015 Chromebook. Google Chrome OS is:

  Version 45.0.2454.86 (64-bit)

  Platform 7262.52.0 (official version) stable-channel samus

  Firmware Google_Samus.6300.141.0

  Hi, the new Google Chrome OS (3.5) client is now available in the Chrome Web Store. It solves the problem of Chrome OS 45 and offers some new features.

  Thank you for your patience and your support!

• Horizon view Agent 6.0.2 Windows 8.1 desktop - size setting display scale causes mouse which will be pasted in the top left corner

  Hello

  I am having some problems when I try to adjust the size to the scale option in the Virtual Office Windows 8.1 with view agent 6.0.2. When I try to change the scale via Control Panel -> display -> option to change the size of all the items ( view failover control settings is disabled by VMware KB: Settings tab is not available in the display panel of a Horizon view desktop locally when t...). After that, the mouse pointer gets suddenly blocked until the upper-left corner, and I'm unable to move the mouse pointer on this corner that the mouse pointer continues new jump in him. When I change the scale to the original (use the keyboard to change the setting), the behavior of mouse pointer returns to normal.

  Anyone else having this problem?

  Found the solution by adding a registry entry:

  Location: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Teradici\PCoIP\pcoip_admin_defaults

  Name: pcoip.disable_cursor_jumping

  Type: REG_DWORD

  Data: 1

  After that it is defined on the parent image and recomposed (or reboot if you want to set this on a persistent desktop computer), there is no more mouse pointer jumps after changing the scale of the fonts/AC.

  This was indeed listed in KB here — not exactly the problem listed in the KB, but it is quite similar:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2060701

• Zero error of the client certificate provided is not rooted in the devices certificate store after upgrade to the Horizon view 6

  We have just updated our infrastructure VMware View Horizon of 5.3 to 6.0.1 and all zero clients are provided certificate is not rooted in the devices certificate store.  The certificate on the brokers of the connection has not changed.  Customer relationship connections Horizon view a connection, as well as when we connect to the connection to the server via a web browser.  We had no cert errors before the upgrade.

  You need to add the following as PEM files to fix the problem on the zero client.

  The intermediate certificate - DigiCertCA.crt

  The root - TrustedRoot.crt certificate

• Requeriments of bandwidth for VM Ware Horizon view 6

  Hello, I am a student and I would like to simulate a network where the data center is in another passage and remote user connection. So, I would like to know:

  What is the requeriments of bandwidth for VM Ware Horizon view 6? Include access to remote (VM Horizon reviews)

  Thanks to advice.

  PDT: Excuse me for my English, I do not speak English, I speak Spanish.

  Hello

  You can take a look at the following:

  http://www.VMware.com/files/PDF/view/VMware-view-5-PCoIP-network-optimization-Guide.PDF

  VMware Documentation Library

  See you soon

• Horizon view auto connect to a pool

  Hello. I'm under view 5.3.2. I have users who have many pools (higher education). The evaluation criteria are physical work stations with an installed display client. Anyway is that when a user who is in the room and starts the client to view the physical office, (after their passage of authentication) will automatically be connected to a pool for this specific room. (e.g. room = Pool A).

  Remember that, by design, all students are entitled to all the pools. I can not change this requirement. With earlier versions of the client view I could have passed the customer settings. Can't do more with customer view 5.3.2. It seems that perhaps this can be accomplished through view GPO settings?

  Thank you

  Here is a link to the new customer documentation PDF.  Inside, it details the same switches...

  https://www.VMware.com/PDF/horizon-view/horizon-client-Windows-document.PDF

  All you need to do is change the properties of the shortcut and add the switch at the end of the target.  If your target should look like this...

  "C:\Program VMware Horizon view Client\vmware - view.exe"-desktopName "Nom_du_pool goes here.

  The quotes around the name of pool are required if there are spaces in the name of your pool.

  Add other switches if necessary.

• Help with renovation Horizon View client for Mac

  I'm packaging the client VMware View Horizon for our Mac desktops and laptops (we have about 150). Normally, it is a very simple and very easy process with this client because it is just a soft. We use Apple PackageMaker to repackage the Horizon of VMware View Client.appand add the plist for the test user for the deployment of future users profiles. We used some com.vmware.view.plist in the past to ensure that our connection to the server is prefilled and force PCoIP. It has worked great for us with all < 2.3 versions.

  From 2.3 and 3.0 now, I have not been able to repackage the application correctly. I have download the .dmg to VMware and copy the .app in it in / applications; This is exactly how a user would install it on their system. I run the Client discovers once and connect to our login server using the settings I want to paste when you deploy this application to our machines. Then using PackageMaker, I point the first part of the package that will be created for Applications/Vmware view Horizon Client.app as usual (including the roots). It's normal. I choose com.vmware.view.plist file, and I'm using a plist Editor, delete the entry for my test user name and office that I'm connected to. In PackageMaker, the destination of this .plist file is in the default profile for the mac - so whenever a new user connects to the mac, they will receive the file .plist with the parameters we want. Sounds good. The package is built successfully. I deploy it on a machine to test successfully.

  When I connect on a test system and run the client from the view, I can connect properly. If I try to use the menu connection/printing enabled, all hell breaks loose and I get a series of errors;

  Invalid file in the package.

  The file is not valid:

  / Applications/VMware Horizon view Client.app/Contents/Library/thnuclnt/thnusetup.sh.

  Please download the official product.

  If I try to start services remotely USB, I get a similar error once it issues a warning that I will be asked to enter the credentials of the admin;

  Invalid file in the package.

  The file is not valid:

  / Applications/VMware Horizon view Client.app/Contents/Library/InitUsbServices.tool.

  Please download the official product.

  ?? If I run the app from the .dmg on this same machine, I have no problem. Any ideas?

  OK, I just had to put the question so that I could think clearly through it.

  There are some extended attributes on these shell scripts that PackageMaker removes when it reconditions the app. I conditioned as a .dmg, and copy the app via the postinstall script in the pkg... works very well after that.

• Problem with USB Redirection on Horizon View Client v2.3.0 for Linux

  I had a problem on the USB Redirection when connecting to the Server of VMware View by Horizon View Client v2.3.0.

  1. Here is our configuration:
     1. Server:
        1. Horizon View Server 5.5 + Windows 7 Enterprise VDI
     2. Client:
        1. Thin client (TI ARM platform - 8148)
        2. Horizon View Client v2. 3 for Linux
        3. USB Flash: Kingston 8 GB USB 2.0, FAT32
  2. The issue: USB flash can not redirect to VDI successfully.
  3. Some status on our test:
  • The USB is plugged USB port on workstation before connecting to Horizon view Server 5.5
  • Light client can recognize and use USB flash to the local site.
  • When we connect to VDI, we can see the USB driver is responsible for research and installation, but windows VDI() reports fail to install the USB driver finally. It seems that VDI trying to acknowledge the failure of USB flash but finally.
  • It is held even Let's restart the workstation and VDI.
  • Attached file is the log of the Horizon of the VMware View Client.

  
  All welcomed to this topic?

  Unfortunately the newspapers show much... (note: they do not contain client-side logs)

  one thing I thought well... since he is a computer thinClient - we have seen the questions that manufacturers computer thinClient some of their own 'management' software install on the client. He often tries to do things with usb devices (maybe try to share them between a receiver client citrix application and view client app or maybe just there is a citrix receiver application installed too). In our experience, we've seen these apps interfere between them as they try to hang the bottom of usb devices down into the kernel.

  as such, could you try stop any 3rd party services - either citrix or your provider of thin client and then try again.

  If the problem persists, can you be sure to also collect these log files from the computer thinclient:

  Windows client

  • %ProgramData%\VMware\VDM\logs\debug-*.txt
    AND
  • C:\Windows\Temp\vmware-SYSTEM\vmware-usbarb-*.log

  Linux client

  • default /tmp/vmware-root/VMware-view-Usbd-*.log
    AND
  • / Library/Logs/VMware/vmware-usbarbitrator -.log

  for reference, the Agent-side usb connects:

  • %ProgramData%\VMware\VDM\logs\debug-*.txt

  see you soon

  peterB

• Cannot get Horizon view 5.3.1 to use Windows CA certificate issued

  Hello

  I have a Horizon view 5.3 vConnection Server installed and wanted to replace the self-signed certificate with one of my MS Enterprise CA (Win 2008 R2 Ent).

  I followed the instructions of these two pages, I think exactly:

  Terence Luk: certification for VMware view Horizon 5.2 with Microsoft Enterprise certification authority servers http://terenceluk.blogspot.co.UK/2013/04/issuing-certificates-for-VMware-horizon.html

  http://www.derekseaman.com/2012/09/create-VMware-Windows-CA-certificate.html

  I took the steps:

  On my Win 2008 R2 Ent (standalone) CA, I reproduced the compatible under Windows 2003 CA Web server certificate template.

  Changed the use of the key to activate non-repudiation and "allow encryption of user data.

  Authentication of the Client added to enforcement strategies

  Confirmed that the name of the topic has been set to "provide in the request.

  Confirmed the vConnection Server computer account has the required permissions (btw, I even gave total control and the problem persists - is not a permissions problem)

  Added the new model to the list available to be issued (CA MMC > Certificate Templates > New > model certificate for the question)

  From the vConnection server, I open the MMC snap-in certificates, computer store

  I asked a new personal certificate from my CA and selected the newly created model

  I have completed only the FQDN internal of my server vConnection CN: [CN = "vmwv-vncenctn - 01.mydomain.local"]

  I updated the friendly name and description "vdm".

  I changed the friendly name of the empty self-signed certificate

  I restarted Windows vConnection server just to make sure that all the necessary services were restarted

  I cannot now connect to during a service of vConnection's web management interface - Page cannot be found.  If I have the friendly name of vdm revert to the original self signed certificate and restart services, access is restored.

  Please can someone help me with this.  I spent two days pulling my hair and getting nowhere.

  Thank you

  C

  Follow rather official VMware documentation.

  http://pubs.VMware.com/view-52/topic/com.VMware.ICbase/PDF/horizon-view-52-obtaining-certificates.PDF

  In particular, make sure that your use of improved key contains the correct value.

  Mark

• Unable to connect to the outside through Horizon View Client

  http://www.VMware.com/files/PDF/view/VMware-view-evaluators-Guide.PDF

  I'm in the middle of evaluation of VMware Horizon View Suite. I set it up according to the information provided in the link above

  I am able to connect to my desktop PC internally through the Horizon View Client and HTML.

  I am also able to connect to the outside through HTML - BUT NOT - through the Horizon View Client from an external location.

  My first thought is that I have all the correct ports open on my firewall to network, that's what I opened, did I miss something?

  TCP / 80

  TCP / 443

  TCP / 4001

  TCP / 4172

  TCP / 8009

  TCP / 8443

  UDP / 4172

  Any help is appreciated with this!

  Exercise 3: connection to a Horizon of a customer of Mobile display view desktop

  "Launch the Horizon View Client you iOS mobile device...". "You will be asked to enter the host name or IP address of the view composer Server"

  See Server of composer? When I enter this IP address, it does not work immediately, it's a typo?

  Any help is greatly appreciated

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=1036208

  My problem was solved by following the information provided in the above document (video), but the following two documents where it is also very useful

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1028332

  0 224598712 http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1039021&sliceId=2&docTypeID=DT_KB_1_1&dialogID=224578928&StateID=0

• Plugin horizon View Agent direct connection + disconnection after disconnection

  If I use the plug-in Horizon View Agent Direct-connection is there still a way to get the virtual machine for auto & with force logoff the current user after X minutes if the (in my case), lightweight client disconnects abruptly (off)?

  It is probably a virtual machine that is not handled by a server view connection? You should create/change the following registry setting power (this would be automatically updated if you were using a CS):

  HKEY_LOCAL_MACHINE\SOFTWARE\VMware \VMware VDM\Node Manager\DisconnectLimitMinutes, Inc.

  The value-1 means immediately, a value of 0 means never. Positive values are the number of minutes to wait after the disconnection occurs.

  Mike

• Installation vCenter Operations Manager for Horizon view adapter

  Hello

  If I want to install the Operations Manager vCenter for Horizon view adapter, I get a Message "confirm the update - vcenter operations manager can not go back to the previous installation state.»

  Backup appliance virtual vCenter OM before applying the update... »

  Is that normal and I can say 'OK' or made, I made a mistake in the Installation with the EGGS?

  Thank you!

  

  
  

  Hello

  I solved it... I was scared, but ok and next... it works great!

  Novell1

• PCoIP zero client does not display an Horizon view Client user of the window for one (and only one)

  The zero client is a Samsung NC241 via Teradici Tera 2. My user has 3 virtual workstations assigned;  Current SOE with WinXP, a specific COMPUTER WinXP and a test for the upcoming Win7. When I connect the customer to see I'm automatically redirected to the WinXP for HER, without going through the window that lists usually all available virtual PC. This happens on all terminals, I tried. Other users, even if you connect to the same terminal, are given the option to select a virtual PC, even if they have the choice of a!

  I have checked the setting for the PC virtual in the Teradici PCoIP Management Console and also the settings of the user under the Horizon view VMware administrator but cannot find where my configurations user and desktop are different from those that work "correctly".

  Is someone able to propose what I'm looking for?

  TIA

  Thanks, Stu, for your input.

  I arrived on the solution after you follow through with your suggestion above. I used the client on a Windows PC, then after that record on I clicked on 'Options' in the bar of VMwareView Client session and erased the text is 'auto connect to this office. We have the option 'Enable automatic reconnection' set to false, so I'm not sure why that followed me.

  But the good news is that it worked!