Envy 17 j108tx: Envy 17 j100 usually power up BUT led is steady white

Similar Questions

• HP Envy 15z-j100 audio works

  HP Envy 15z-j100 audio doesn't work. Please help I got this laptop a week ago and now the sound does not work. I think it's the High Definitin Audio CODEC, which is the problem

  Hi BrandonJohnsonx,

  I understand that you have a problem with the audio doesn't work does not correctly on your Hp Envy 15z-j100. If you follow this document on the system restore it should solve your problem, because he's going to reinstall while it was working properly.

  http://support.HP.com/us-en/document/c03327545

  Let me know.

  Thank you

• Driver Bluetooth for hp envy 17-j100 ee win 7 32-bit or 64-bit

  Dear Sir

  I'm looking for EA for hp envy 17-j100 bluetooth driver for win 7 32-bit or 64-bit, I don't find it on the site of hp adapter? can you please guide me where to download

  Here is the site of product drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=6884...

  Try this driver...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_130390_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Laptop HP ENVY 15z-j100 CTO: Fingerprint Reader detection (HP ENVY 15z-j100 CTO < ENERGY STAR >)

  Recently I formatted my laptop after returning from Windows 10. Unfortunately, I had to do it through hard-wiping instead of software reset or rollback. Now, I can't get my fingerprint reader to work. I found almost all the drivers for my laptop via this Web site and tool for detection of HP model except for the fingerprint reader and its software (SimplePass), which is weird because I downloaded the installer of the driver on this site once the detection tool has led me to the page. How can I get that back?

  Hi @PhilbertSelda,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your problems with the download of the fingerprint software and HP ENVY 15z-j100 CTO Notebook. Here is a link to your page of model software the software Fingerprint is located under the Security section of the software.

  Here is a great document for troubleshooting the fingerprint reader. If you need it.

  I hope this is what you need.

• H8 1414 HP envy. Need more power supply to run a better graphics card

  H8 1414 HP envy. Need more power supply to run a better graphics card. I don't have that power 300 watt need more someone knows a number of room and the place to get one that fits? I know that windows 8 makes it difficult, I am ready to install windows seven anyway.

  Nick, welcome to the forum.

  You can use any standard ATX power supply unit (PSU).  I always recommend measuring the PSU existing and comparing measures to whichever you choose, however.  I love Corsair products.  Also, I recommend at least 500W; 600W is even better for future updates.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Satellite L500-1XD usually power up

  My Satellite L500-1XD wont power up.
  Power supply failed. Received a replacement power supply, but all that happens when I plug it, that it is in the flashes of light (DC IN) (green) also makes a slight clicking noise.

  No indication of battery or something else ideas? The book says something to do with the heat dispersion system

  Post edited by: craig_inst

  Hello

  You see a BIOS or Toshiba splash screen?
  Nothing is visible on the screen?

  If this isn't the case, I guess that your laptop developed a serious hardware problem and I think that the parts must be checked by an ASP in your country.
  Theoretically, it could be related to memory, processor or motherboard
  So first the RAM modules must be verified, and if the RAM modules are ok, then, the technician should follow with processor and motherboard.

  Welcome them

• OfficeJet 4620 wants to power down, but won't start button / stop

  Most of the time the printer/scanner works fine, but sometimes it "sulking" and wants the power off, but won't the power button.

  I have a switch in the extension cord to the electric line which I use in these moments there (better than pulling the plug?).

  When the current is applied again the printer usually goes back to work.

  Sometimes he blames me for not using the power button - I really try that and generally goes back to work when I promise to do better in the future.

  Yet at other times, he wants the power cut off, even once.

  The printer is connected to the router via wifi.  Two computers are connected by ethernet to the router using Windows XP or Linux (via hplip).  One or more laptops can be connected to the router using Win7 or Linux (via hplip) wifi.

  (Really) thanks for your help and suggestions, but I think I've reached my limits.  I followed your link and entered the information produced.  The result is that the warranty expired 11 days ago.  It's an interesting period of guarantee; ten days of 27 months.  I bought September 15, nearly 11 months ago.

• I usually use Firefox, but it started to plant, so I changed to Internet Explorer but no luck.

  I usually use Firefox but it started to plant, so I changed to Internet Explorer but no luck... Help
  original title: all my browser crash... why

  I usually use fire fox, but he started to plant so I changed to IE but no luck... Help

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Tecra S2 - power and battery LED flashes - no start

  G ' Day at all.

  I have a TECRA S2 under XP SP3.
  Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

  I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

  Tried several times with the battery inside and out with the same results.
  I have stabilize power before removing or installing battery.

  Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
  See you soon
  kb3500

  > Everything was going well until I went to a place of friends with her and plugged to the power
  Did you use the right adapter?

  To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
  the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

• My iPhone 4 is dead. I loaded an hour then tried the power reset but not joy.

  My iPhone 4 is dead. I loaded an hour then tried the power reset but not joy.

  I'm going to assume that your iPhone 4 no is not in warranty, otherwise you'd be on the Apple Store, right?  I also assume that you are not interested to pay the service battery $ 79 or $ 199 iPhone 4 warranty exchange for a device that is worth less than $100 (U.S. prices)

  So so let's solve the problems.
  When was the last time it works well?

  An iPhone 4 is old enough, and if it has been inactive for a while, then it is possible to lose load under the level at which it is able to charge the battery.  The battery has a logic board little teeny buried in the packaging of the battery that dictates the charging process.  There is really no energy, the battery doesn't have enough juice to be able to tell itself to charge when the charger is connected.

  If the phone has relatively recently been works well, then start troubleshooting in the charging port.  Is your refill clean?  Try to clean with alcohol to 99% and a q tip.  If that doesn't resolve, then you need more information - there are some ammeters really convenient usb little inexpensive that you can plug into a charger, then the unit and he will tell you exactly how much, if any, current load appliance pulls.  An iPhone 4 with normal charging system should draw on 1 ampere.   If yours is pulling 1 amp and shows still do not display, try to connect to iTunes to see if your device is recognized.  If this is the case, then you need solve a display problem, not a problem of load.

  If your closer 0 amp, then you need to open your phone and troubleshoot the battery and dock connector.    A lot of DIY resources out there for you help with this, just a google search away.

  A trip to an independent repair facility will also help you to go down on the problem.  Pick one that stands out for its work with the great review, great warranty and someone who is willing to look at this iPhone 4 with a no solution = no fee policy.

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• My continuous HP desktop computer to go to sleep more I use my computer. I have disabled the option to sleep on POWER SETTINGS, but he continues to go to mode "Eve".

  For the past 2 weeks my HP desktop computer has begun to enter the mode "sleep" whenever I use it. As soon as I turn on my computer it goes immediately into mode "Eve". I would leave it alone for a day or to and it won't happen again. More I leave it alone is more of my time. I tried to change my settings on the POWER SETTINGS, but he continues to go to mode "Eve". I don't know if it's a question of a hardware problem software. Help, please.

  Hi MakCalixte,

  Did you recent hardware or changes to the software of the system?

  Method 1:

  You can try to uninstall the graphics card or roll back the graphics card and check if it helps.

  For more information, you can consult the following articles:

  Uninstall a program

  Restore a driver with its previous version

  Method 2:

  You can also consult the following articles and check if the problem occurs in safe mode and let us know the results.

  Start your computer in safe mode

  Hope this information is useful.

• HP envy 15 t-j100: hp don't envy 15t - j100 - no bluetooth

  I bought my Hp envy 15 t-j100 last year and since then I have no bluetooth on this unit. How can I get bluetooth?

  Press the power button and then immediately press the ESC key to call the start menu.

  In the boot menu, press the F1 key to display the information esystem section.

  Information system will provide details on your laptop, including a Bluetooth FCC ID, if a card compatible bluetooth is installed.

  If you do not see a bluetooth FCC ID, this means that your laptop doesn't have bluetooth as part of its installed equipment capacity.