Host a PropertyEditor in a DataGridView cell

Similar Questions

• help power shell VM information

  Hello

  I need assistance with my shell script which makes me the name of the virtual machine, the processor, the memory and the host.
  I back everything except the host, I have the following exception.

  'Point': "Exception from HRESULT: 0x800A03EC.
  C:\temp\ESXtest.ps1 level: character 29: 18
  + $Sheet.Cells.Item < < < < ($intRow, 7) = $objItem.Host
  + CategoryInfo: NotSpecified: (:)) [], SetValueInvocationException)
  + FullyQualifiedErrorId: CatchFromBaseAdapterParameterizedPropertySetValueTI

  the script

  SE connect-VIServer-server iron - statistics of username-password 123

  $Excel = new-Object - Com Excel.Application
  $Excel.visible = $True
  $Excel = $Excel.Workbooks.Add)
  $Addsheet = $Excel.sheets.Add)
  $Sheet = $Excel.WorkSheets.Item (1)
  $Sheet.Cells.Item (1,1) = 'name '.
  $Sheet.Cells.Item (1,2) = 'NB CPU.
  $Sheet.Cells.Item (1,3) = '(MB) of memory.
  $Sheet.Cells.Item (1.4) = "ProvisionedSpaceGB".
  $Sheet.Cells.Item (1.5) = 'Notes '.
  $Sheet.Cells.Item (1.7) = "$vmhost".

  $WorkBook = $Sheet.UsedRange
  $WorkBook.Font.Bold = $True
  $WorkBook.EntireColumn.AutoFit)
  $intRow = 2

  $colItems = get - VM | Select-Object 'name', 'NumCPU', 'MemoryMB', 'ProvisionedSpaceGB', 'Notes', 'Home'
  foreach ($objItem to $colItems)
  {
  $Sheet.Cells.Item($intRow,1) = $objItem.Name
  $Sheet.Cells.Item($intRow,2) = $objItem. "" NumCPU.
  $Sheet.Cells.Item($intRow,3) = $objItem. "" MemoryMB.
  $Sheet.Cells.Item($intRow,4) = $objItem. "" ProvisionedSpaceGB ".
  $Sheet.Cells.Item($intRow,5) = $objItem. "" Notes ".
  $Sheet.Cells.Item($intRow,7) = $objItem.Host
  #foreach ($objItem in $colItems)

  $intRow = $intRow + 1
  }

  # $powerstate = $objItem.PowerState
  # If ($PowerState - eq 1) {$power = "Powerd on"}
  # Else {$power =? {Powerd off?}

  
  Disconnect-VIServer-confirm: $false

  Hello

  Please try to change this line

  $Sheet.Cells.Item($intRow,7) = $objItem.Host

  This line

  $Sheet.Cells.Item($intRow,7) = $objItem.Host.Name

  Greg

• VCSA - on a cluster? Or a way to Hyper-V import?

  Hello

  I have 4 ESXi servers. In some network a windows with HyperV server. Now I have vCenter directly under Windows. In the future, I would use VCSA. But I can't find some Hyper-V device.

  Then?

  1 / it is safe, when I VCSA on cluster with ESXi 4? But what will for example live motion in HA when the host with VCSA fails? Difficulty, cela not vCenter but must be online, right?

  2 / it is hyper-v device somewhere?

  Thank you very much!!!

  Pavel

  1 / it is safe, when I VCSA on cluster with ESXi 4? But what will for example live motion in HA when the host with VCSA fails? Difficulty, cela not vCenter but must be online, right?

  Your assumption that the vCenter/VCSA must be online for HA to function is incorrect. You only need a connection for the initial setup of the HA agents on your hosts.

  If the host running the VM VCSA/vCenter fails, HA will save the day as usual by restarting on another host, just like any other virtual computer. The HA restart process has nothing to do with the Webcam live migration/vMotion either (which would require vcenter).

  So, if you have the choice between a stand-alone host with some hypervisor and a fully redundant cluster with HA and live migration, which is the best choice for the VM VCSA of accommodation should be fairly obvious.

  2 / it is hyper-v device somewhere?

  No, there is no device VCSA Hyper-V.

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• Look of cells upward and replace function in numbers

  Hi here's a video explaining what Im trying to do. http://www.screencast.com/t/zrR5wDKEm4j7

  or here https://s3.amazonaws.com/edferrigancoaching/Video/Eds+Numbers+Request.mp4

  What I have is 2 tables. A collection of data. The other is summarizing the data. I want to finish with only 4-5 "buckets" in table two. I need a formula to take the content in a cell in the table 2 back to the one table and find all occurrences in this column and replace them with content I enter in a cell in front of the cell I want changed. The video will illustrate this.

  I searched on Fiverr experts of numbers, but only two people announced the knowledge of numbers and no one knew how to this number. Thank you this will help a lot on a long term project, I want to use it with over and over again. Ed

  < email published by host >

  Why not use the search and replace in the menu "Edit > find > find...» »

  

  This brings a dialog box where you can enter the search text and what to replace this text with:

  

• If I buy a new iPad in the United States (cell

  I am traveling to the United States shortly and by looking at the price I want to put on an amount of $200 on the iPad + pen + keyboard, but I was wondering if the iPad obviously work OK in Australia - Aussie SIM card

  < published by host >

  You probably won't have a valid warranty then - this is an excerpt of the guarantee:

  IMPORTANT RESTRICTION for iPHONE, iPAD AND APPLE TV SERVICE.

  Apple may restrict service guarantee for iPhone, iPad and Apple TV in the country where Apple or its distributors allowed initially sold the unit.

  from there:

  http://www.Apple.com/legal/warranty/products/iOS-warranty-document-us.html

  So I would not recommend it as you would yourself. No idea re. the SIM/cell service - I suggest to check you with a provider in your country.

• Equium L40 PSL41E: Wireless not connect host process not put end to

  Recently, I got a blue screen on this laptop crash after that get a message telling me a host process had ended.

  The computer is running Vista, so I expect problems when my parents bought my sister this laptop.
  In any case despite the frequent blue screen stop messages, etc.. When I get the message telling me that the host process put an end to my wireless connection gets messed up.

  The last time I used windows: diagnose why Windows cannot find network option and was quickly informed that my wireless was turned off (despite the fact that he was actually turned on) and that the computer would automatically turn back on.

  After that it worked fine for a few days until I had another stop of host process and the computer crashed once more.

  This time, the computer refuses to connect despite the use of the above method and the ConfigFree(Connectivity Doctor), fix the connection etc.

  I give myself the possible Solutions are:

  Check the communication device for bridged settings you may need to disable the bridge or reconfigure. a 15.

  It is certainly not the problem.

  a-9 Move closer to the wireless router.

  Even once is not the problem, I'm sitting next to.

  a-10 tour of all bluetooth devices or other devices that may interfere.

  There are no such devices near to.

  a-11 Check to check a microwave oven is not in use is close.

  It is not in use.

  a 13 make sure that the maximum number of devices connected to the access point is not exceeded.

  Well, it worked for 6 months before that, so I do not know is not the case.

  a 37 to ensure that filtering by mac address of the access point is configured correctly.

  I don't have any idea what it means. But my cell phone girlfriends works very well with the wireless connection.

  a 19 restart the router/access point

  Done several times.

  Well, good suggestions. Fire now that I'm all ears.

  Hello

  I put t know why a host process has stopped working, but to my knowledge, the process could be svchost.exe.
  However, the issue seems to be related to the Vista OS problem

  I see that you have tried to solve this problem, but without being successful, you also get a BSOD so I think it's a serious problem of software and you must first use the Toshiba Recovery CD to reinstall the operating system on this laptop.

  After the new installation (would take about 15 min) update the operating system to the State.
  Then you can try to reconfigure the wireless network

  It's worth to try ;)

• LVOOP DataGridView crash when a specific property defined in certain order

  I am writing an API in LVOOP for the DataGridView control .net, especially because I like / want combobox in the functionality of the listbox. Everything is fine, but I ran into a strange thing sort of. In the attached code "test.vi", if I set the property to allow the user to add true lines once I added a combobox column, things work fine. But if I set it to false, I get a crash.

  Now, if I set the same property to true or false BEFORE I add this column, I get no crash. I can't seem to reproduce outside LVOOP so I wonder if that is the question. Could someone let me know if they can reproduce this? I put all possible cases in diagram disable structures, so you just turn on and off properly.

  Note: I hope that you are familiar with context-sensitive help, as I have not created icons for my screw (yet)

  I see the same thing on 2012, even if it is not acutally that an accident - just LV gets stuck in the unresponsive State.

  If you make the control more, this stops happening, probably because the cell or the last row is now visible, so I suspect that there is an unhandled exception or something similar somewhere that LV is waiting, similar to what is described here - http://social.msdn.microsoft.com/Forums/en/winformsdatacontrols/thread/00437163-e197-4ba1-9e95-a3a24...

• Lost computer internet wired host and work group

  Wired desktop host XP Home Edition has lost internet connection on a network shared with win 7 laptop wireless. Laptop computer has the internet connection on shared network, but do not pick up the host.  Only picks up residential and d-link bridge.  Host not to pick up cell phone, or a residential gateway.  Cannot reconnect because the TCP/IP settings are incorrect.  LAN and 1394 are send but not receive.  How can I restore internet on the host and the two working group? Working group name is always on both computers. Do I need to set up a new network and the Working Group?

  Thank you

  kbp

  Thank you my computer guy came and fixed it.

• Inserting a Flash Drives and cell phone causes blue screen - stop 0x3B

  Original title: inserting a few Flash Drives, but not all, and cell phone causes a blue screen of death

  Computer Dell Inspiron 518 Intel core 2 quad, 6 GB memory, office 2 years.
  HP Vista 64-bit, Service Pack 2, updated version 6.0.6002 fully implemented.
  No change to HW or SW immediately before the first detected failure, but the USB port which is not often used.
  History - off Ready Boost after a short experience and installed months ago driver and card Renesas Electronics USB 3.0.  This driver has been disabled through all of this, but I've not yet physically removed the card.  Disable ready boost was simply to stop - no other instructions not found for removal.

  Anitvirus BitDefender and Malwarebytes scans are both clean.

  A flash drive works fine, but three others cause seconds blue screen of death after installing into any USB port.   Bought a new flash drive and it also causes a crash.  Found cell phone also gives BSOD.  All work fine on another computer.  USB is currently led printer, external hard drive, digital camera downloads and keyboard/mouse very well.  Tried both USB ports with the same results and back and disconnected all other USB devices except the keyboard and mouse.  Remove and reinstall all USB drivers (6) one by one (the 1CH9 Intel USB controllers host family) and USB controllers enhanced (2);  also storage device USB and device drivers USB Composite and façade drivers card reader.  After each new facility, any 'bad' flash player causes immediate crash.  'Good' flash player's Centron Centon Pro 8 GB and one of bad flash drives is one attached PNY 8 GB, another a San Disk.  I think, but I don't remember, that the 'good' flash player was installed for Ready Boost test.

  Unable to find a failure code or no trace of several accidents in the problem reports.   Here is all the data of failure that I could find:

  0x0000003B
  (0x00000000c0000005)
  0xfffff8002a8db87
  0xfffffa601

  I'm puzzled.  Thanks in advance.

  Tom

  Hello

   
  You must update the BIOS (Basic Input Output System) and the Pilots of the Chipset using the computer manufacturer.

• Cannot ping port host MD3000i on RC0

  Hello

  I have set up my iSCSI network, as suggested in this post:

  http://en.community.Dell.com/TechCenter/storage/w/wiki/MPIO-to-PowerVault-MD3000i-with-Microsoft-iSCSI-initiator.aspx

  I can only ping the ports of controller RAID 1 (two ports). All of my iSCSI traffic is drunk through the controller. Windows Server 2008R2 (R710/810), but also an ESXi 4.1 cluster (R610 and PE2950) access the dedicated iSCSI network. I contacted the support a few weeks ago, and they have replaced the MD3000i RAID controllers as well as the background. They are insistent that there is a configuration problem and would not assist any more beyond to send me links suggested configs. I went through the Setup on the R810 (Windows 2008R2) from scratch. This has not produced different results. Then I updated all drivers (BCM5709Cs) NETWORK card and software on all hosts, successfully restarted the MD3000i and the two MD1000s bike powered two switches HP Procurve 1400 and restarted all hosts. I can't always ping RC0. I Putty and captured RC0 boot logs, but it was not obvious to me. Here are the logs of boot:

  -=<###>=-
  Set the interface lo0... done

  Autonomous 9768 symbols added.
  Error
  03/26/13-16:44:29 (GMT) (tRootTask): NOTE: I2C transaction returned 0x0423fe00

  ATTENTION: Reset by spare controller

  Current date: 26/03/13 time: 09:26:15

  Send Change Service Interface rate or baud
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: sequence SOD is Normal, 0
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: SOD: removed host SAS from index 0
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: in iscsiIOQLIscsiInitDq.  iscsiIoFstrBase = 0 x 0
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: turn on seeing failure summary tray
  03/26/13-16: 44:48 (GMT) (NCDB): NOTE: SYMBOL: SYMbolAPI registered.
  esmc0: event LinkUp
  03/26/13-16: 44:50 (GMT) (tNetCfgInit): NOTE: the loan network
  03/26/13-16: 44:51 (GMT) (NCDB): NOTE: channel initiating Drive: ioc:0 bringup
  03/26/13-16: 44:54 (GMT) (NCDB): NOTE: the Firmware Version of the IOC: 00-24-63-00
  03/26/13-16: 45:17 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 0 phy:0 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16: 45:17 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 0 phy:1 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16: 45:17 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 1 phy:2 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16:45:18 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 1 phy:3 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16:45:18 (GMT) (tSasCfg021): NOTE: path of the Alt up - chan: 0 phy:18 itn:1 controller
  03/26/13-16:45:18 (GMT) (tSasCfg022): NOTE: path of the Alt up - chan: 1 phy:16 itn:2 controller
  03/26/13-16:45:18 (GMT) (IOSched): NOTE: discoveredEncl: enclosure: 1, enclProp: x2c50104, trayId: slotCount 2:15
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: IonMgr: Drive Interface enabled
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: SOD: instantiation Phase complete
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: controller between open Communication channels
  03/26/13-16: 45:19 (GMT) (IOSched): NOTE: initiator of news: 1 - channel: 1, devHandle: x2c, SAS address: 590b11c41a9d8b00
  03/26/13-16: 45:19 (GMT) (tSasDiscCom): NOTE: complete a discovery SAS task created
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: LockMgr role is slave
  03/26/13-16: 45:19 (GMT) (IOSched): NOTE: discoveredEncl: enclosure: 1, enclProp: x2c9516c, trayId: slotCount 2:15
  03/26/13-16: 45:19 (GMT) (IOSched): NOTE: new initiator: 2 - channels: 0, devHandle: x1a, SAS address: 590b11c41a9d8b01
  03/26/13-16: 45:21 (GMT) (IOSched): NOTE: discoveredEncl: Speaker: 2, enclProp: x2c8f730, trayId: 1, slotCount: 15
  03/26/13-16: 45:21 (GMT) (sasCheckExpanderSet): NOTE: Expander Firmware Version: 0116-e05c
  03/26/13-16: 45:21 (GMT) (sasCheckExpanderSet): NOTE: address SAS Expander: salvation = Low = xf6ac8d10 x5848f694
  03/26/13-16: 45:21 (GMT) (tSasDiscCom): WARN: SAS: Initial full time of discovery: 33 seconds
  03/26/13-16: 45:21 (GMT) (IOSched): NOTE: discoveredEncl: Speaker: 2, enclProp: x2c66ad4, trayId: 1, slotCount: 15
  03/26/13-16: 45:22 (GMT) (NCDB): NOTE: spmEarlyData: from alternate data
  03/26/13-16: 45:22 (GMT) (NCDB): NOTE: WWN baseName (valid ==> SigMatch) 00040026-b95795de
  03/26/13-16: 45:23 (GMT) (NCDB): NOTE: ionEnableHostInterfaces is waiting for a channel lends itself
  03/26/13-16: 45:26 (GMT) (NCDB): NOTE: ionEnableHostInterfaces expected 3800ms for a channel lends itself
  03/26/13-16: 45:26 (GMT) (NCDB): NOTE: IonMgr: Host Interface enabled
  03/26/13-16: 45:26 (GMT) (NCDB): NOTE: SOD: pre to complete initialization Phase
  03/26/13-16: 45:47 (GMT) (NCDB): NOTE: ACS: autoCodeSync(): beginning of the process. Comm mode: 0, State: 1
  03/26/13-16: 45:47 (GMT) (NCDB): NOTE: SOD: complete Phase initialization Code synchronization
  03/26/13-16: 45:48 (GMT) (NvpsPersistentSyncM): NOTE: persistent storage NVSRAM updated successfully
  03/26/13-16: 45:48 (GMT) (NCDB): NOTE: initialization complete USM Mgr with 0 records.
  03/26/13-16: 45:49 (GMT) (NCDB): NOTE: BDU - received 1 small files
  03/26/13-16: 45:49 (GMT) (NCDB): NOTE: BDU - received 0 records of great
  03/26/13-16: 45:50 (GMT) (NCDB): NOTE: acquire 0.035 dry
  03/26/13-16: 45:53 (GMT) (NCDB): NOTE: QLStartFw: FW drive download image 03.00.01.47 033eab00 4c0c8 bytes, result 0
  03/26/13-16:45:55 (GMT) (tRAID): NOTE:  ********************************************************************************
  03/26/13-16:45:55 (GMT) (NCDB): NOTE: Application target QLogic, 2.01.08 Version 2005-06-13 (W2K)
  03/26/13-16:45:55 (GMT) (NCDB): NOTE: iSCSI Target Application
  03/26/13-16:45:55 (GMT) (tRAID): NOTE:   ********************************************************************************
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: iSNS Server 0.0.0.0:3205
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: ISNSServerIPv6Addr 00:00:00:00:00:00:00:00: 3205
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: iSCSI name iqn.1984 - 05.com.dell:powervault.md3000i.60026b90005795de000000004b2ae7b6
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: port = 0, turn on IPv4 = 1, turn on IPv6 = 0
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: 10.182.233.250:3260 IP address
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: Firmware waiting for DHCP lease.  State 18
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: 18 FwState 000/010 of time
  03/26/13-16: 45:57 (GMT) (NCDB): NOTE: QLInitializeFW: 10/01/00 18 FwState of time
  03/26/13-16: 45:58 (GMT) (NCDB): NOTE: QLInitializeFW: 10/02/00 18 FwState of time
  03/26/13-16: 45:58 (GMT) (IOSched): NOTE: QLIsrDecodeMailbox: Port 0 bind upward.
  03/26/13-16: 45:59 (GMT) (NCDB): NOTE: QLInitializeFW: 10/03/00 FwState time 0
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: port = 1, turn on IPv4 = 1, turn on IPv6 = 0
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: 10.182.232.250:3260 IP address
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: Firmware waiting for DHCP lease.  State 18
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: 18 FwState 000/010 of time
  03/26/13-16: 46:01 (GMT) (NCDB): NOTE: QLInitializeFW: 10/01/00 18 FwState of time
  03/26/13-16: 46:02 (GMT) (NCDB): NOTE: QLInitializeFW: 10/02/00 18 FwState of time
  03/26/13-16: 46:03 (GMT) (NCDB): NOTE: QLInitializeFW: 10/03/00 FwState 18 time
  03/26/13-16: 46:03 (GMT) (IOSched): NOTE: QLIsrDecodeMailbox: Port 1 link up.
  03/26/13-16: 46:04 (GMT) (NCDB): NOTE: QLInitializeFW: 10/04/00 FwState time 0
  03/26/13-16: 46:05 (GMT) (NCDB): NOTE: PM - reading DB (record 1.0)
  03/26/13-16: 46:08 (GMT) (t1): NOTE: QLTA_HandleTeb: Connect ports 0
  03/26/13-16: 46:08 (GMT) (t3): NOTE: QLTA_HandleTeb: port 1 link up
  03/26/13-16: 46:09 (GMT) (t2): WARN: QLTA_Handleteb: 72 event Code.
  03/26/13-16: 46:09 (GMT) (t4): WARN: QLTA_Handleteb: 72 event Code.
  03/26/13-16: 46:09 (GMT) (NCDB): NOTE: CCM: sodMirrorCheckIn() waiting alt cache check in mirror...
  03/26/13-16: 46:10 (GMT) (NCDB): WARN: CCM: initMirrorAltChkIn() may not reflect
  03/26/13-16: 46:11 (GMT) (NCDB): NOTE: CCM: initialize(): cache configuration
  03/26/13-16: 46:11 (GMT) (NCDB): NOTE: from UWManager::initialize, 510, the invalid index - 1 entries
  03/26/13-16: 46:11 (GMT) (NCDB): NOTE: NVSRAM IW queue size is 0
  03/26/13-16: 46:16 (GMT) (NCDB): NOTE: RTR: IO released
  03/26/13-16: 46:17 (GMT) (NCDB): NOTE: SOD: initialization Phase complete
  ==============================================
  Title: Disk Array Controller
  Copyright 2005 - 2011 LSI Logic Corporation, all rights reserved.

  Name: RC
  Version: 07.35.39.64
  Date: 16/08/2011
  Time: 14:24:32 CDT
  Models: 1532
  Manager: devmgr.v1035api01.Manager
  ==============================================

  03/26/13-16: 46:17 (GMT) (NCDB): NOTE: sodMain of the sequence is complete, elapsed time = 90 seconds
  03/26/13-16: 46:17 (GMT) (NCDB): NOTE: complete sodMain
  03/26/13-16: 46:17 (GMT) (EventGateManager): WARN: GMOS: 8 events of creation for objects that already exist

  IPs I can ping: 10.182.232.251 and 10.182.233.251 (both on RC1). I can even ping all other iSCSI host initiator ports! I hope I gave enough information about me for some answers. Please advise!

  Thank you.

  What are the 4 IP addresses and subnets for the 4 the MD3000i iSCSI ports?

  ISCSI controller 0 port 0?: (guess 10.182.232.250/24)

  ISCSI 0 1 controller port?: (guess 10.182.233.250/24)

  Controller 1 iSCSI port 0: 10.182.232.251 24 (hypothesis on the mask)

  Port of iSCSI controller 1 1: 10.182.233.251 24 (hypothesis on the mask)

  Wiring must be:

  iSCSI 1 Switch / VLAN:

  ISCSI controller 0 port 0

  ISCSI controller 1 port 0

  Server 1 iSCSI port 0 (in the subnet 10.182.232.x 24)

  etc.

  iSCSI Switch 2 / VLAN:

  ISCSI 0 1 controller port

  ISCSI 1 1 controller port

  Server 1 iSCSI port 0 (in the subnet 10.182.233.x 24)

  etc.

  To test iSCSI on controller 0 port, take a cell phone with a Gbit ethernet port (any modern laptop should have it), connect the ethernet controller iSCSI 0 0, 10.182.232.100 port value IP from the laptop and try to ping 10.182.232.250 (assuming that it comes to the INVESTIGATION period on this port). If it works, change the IP of the laptop to 10.182.233.100 and move the cable to the iSCSI port 1 and try to ping 10.182.233.250 and see if you can ping the IP address.

  If these two are working, the first thing that comes to mind is that the port 0 and 1 have their swapped cables.

• Connection WIFI mobile phone to the laptop, so I can access the web of the cell

  My laptop is connected to the internet by internet dongle, I want to connect my cell phone to the laptop via WIFI so I can access the Internet from the mobile phone, how to put in place on windows 7?

  You can configure a network hosted with your Windows 7 machine. Here are a couple of free GUI frontends to the netsh commands that implement this. These turn a computer into a virtual router Windows 7 wireless.

  http://virtualrouter.codeplex.com/

  http://www.Connectify.me/index.html

  Assuming that your USB dongle is a device high-speed 3G / 4G, you might also look into buying a router. Some examples...

  http://3gstore.com/index.php?Main_Page=index&cPath=35

  The advantage of the router, it is that you need not the Win 7 PC all the time so that your other devices have access to the public internet.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• BlackBerry Smartphones New 9900 s - cannot update cell phones

  Just bought two 9900 and installed (twice so far) the program BB Desktop Software. The difficulty to complete the update of the first phone software. Finally managed to configure and then synchronize the phone. However, under the 'Applications' tab in the desktop software, there was a software update and two other programs to install (I think that's something DOD and another to install.) When I launched the update and install, I could see the files being downloaded apparently, but now the screen appears to be locked in the applications of update - update - box device software download, with the green circle progress assets. The progress at the bottom of the box bar says "Connecting to the boot ROM" above him, but there is no indication of progress in the last 3 hours. Is this process at a standstill on / locked or is - it normal to have no feedback on installation? The box also says, "do not unplug the unit before the day is over". Thank you very much.

  Thanks for the reply. I got a bit of a workaround for my particular situation. I had tried several times to use the Blackberry Desktop program on a Windows XP virtual machine, that will run on a linux host (as bb is not so far seem to think to provide a linux version of the program for linux users is worth.) Subsequently, I decided to get the wireless working on the laptop, what boots double and install the program office bb on xp he. Although she gave me even a few error messages, I could do the update of the OS and install the 2 other programs on my bb. Also found my outlook contacts and their transfer to my cell. All's well that ends well I guess. Thank you very much.

• Why will my router stops transmitting the internet signal after that I turned off the host computer?

  Hi members of the community.

  first of all, my setup:

  modem - router (wrt320n lynksis, yesterday I uplodaded latest firmware - it does not help)---(par câble), PC (windows 8)
  l
  l
  various devices (cable TV, wireless: laptop computer (windows XP), phones (Iphone, android, phone etc.))
  Second question:
  Until now, I had no problem with router, but as I connected the new PC, with windows 8 is installed, the router, I began to encounter the following problem: I turn the host computer (wired, PC with windows 8) off after a minute or two the router (if not always on) continues to transmit the internet signal with other devices (wired (TV) and other wireless).  What's also interesting is that, when I unplug the PC from the router ethernet cable (when the PC is turned off), the router begins to function normally. Why and how to fix it? It seems that the PC would stop the router in the transmission of the signal.
  I would apreciate any help I could get. Because the router is working otherwise fine (when the computer host is turned on when the PC is disconnected from the it), I guess it has something to do with the windows configuration.
  Thank you all,.
  Sincerelly, Janez

  Hi there... we have a different router, but I had exactly the thing happens to me when my husband bought his new computer. After hours of technical support that gave no results of our router manufacturer, I did some research on the web, a vast and I think I found the solution.

  Go to control panel > system and security > system > Device Manager > network adapters > find your network card (mine says in time real PCIe GBE) open cela, go to power management and uncheck the BOX allow the computer to turn off this device to save power.

  After that I did that my router is no longer turns off/goes to sleep when my computer is. Offshore.

  Give that a try, and if all goes well, it will help you too.

• Unexpected 'cpuCount' value returned by the command "LIST CELL DETAIL" cellcli EI

  Hello

  After execution of cellcli EI 'LIST CELL DETAIL' command to a server of the cell, I noticed that the output of the 'cpuCount' attribute was 24/24.

  In most of the Exadata environments I've worked with, the output is only 1 number, for example: 16

  Just the curiosity, what is the sense of value 24/24 for the attribute 'cpuCount'?

  I believe that this reflects the total number of CPU cores that are active on the host vs. the total number of cores of CPU on the host computer.  When you run the ability to demand (or as an eighth rack), the number indicates a fraction.  For example, a compute node X 5-2 contains 36 physical processor cores, but there only 18 cores enabled.  In this case, the attribute coreCount on the compute node would show 18/36.

  I see this on my rack X 4-2 running the version of the 12.1.2.1.2 image, while my X 3-2 12.1.2.1.1 still running rack displays the number using the old method, so it seems that it may have been introduced with this version.

  [root@enkx4db01 ~] # dbmcli EI list dbserver detail | grep-e "name | coreCount | makeModel | releaseVersion.

  name: enkx4db01

  coreCount: 24/24

  makeModel: Oracle SUN SERVER Corporation X 4-2

  releaseVersion: 12.1.2.1.2.150617.1

  [root@enkx3db01 ~] # dbmcli EI list dbserver detail | grep-e "name | coreCount | makeModel | releaseVersion.

  name: enkx3db01

  coreCount: 16

  makeModel: Oracle Corporation SUN FIRE X 4170 M3

  releaseVersion: 12.1.2.1.1.150316.2