Host Firesight license limit

Similar Questions

• ASA 5505 host under license limit has been exceeded

  I'm receive syslog message 450001 - host license limit has been exceeded.

  To see the version on my ASA 5505 (8.0.2), inside hosts are limited to 10. The limit of 10 corresponds to the limit (10) syslog error message.

  How is this calculated number of hosts? Show arp represents 6 addresses glued to the inside interface.

  Hello

  Don't use "show arp", use "local host" instead.

  Excerpt from http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/specs.pdf

  In routed mode, hosts inside (business and home VLAN) account in the limit only when communicating with the outside (Internet, VLAN).

  Internet hosts are not counted toward the limit. Also, guests who initiates the traffic between businesses and home are not counted toward the limit. The interface

  partner with the value default route is considered to be the Internet interface. If there is no default route, hosts on all interfaces are taken into account in the limit.

  In transparent mode, the interface with the smallest number of hosts is counted within the limits of the host. See the show local-host command to view the host

  limits.

  Kind regards

  Dandy

• New host ESXi licensing

  Hi guys,.

  I am currently working on a workflow for the provision of new hosts ESXi from scratch. Unfortunately, I glued on the new VMWare licensing to a host. I wanted to do this with a script element:

  Entry:

  Host (VC: HostSystem)

  License (String)

  Code:

  Host.configManager. licenseManager. licenseAssignmentManager.updateAssignedLicense (Host.id, license, null);

  Unfortunately, this returns an error indicating licenseManager is null.

  Anyone know how to set the new licenseManager on the host or license in another way?

  Thank you

  Kamil

  OK, I got it myself. Instead of approaching licenseManager thanks Host.configManager I used instead of the VC:SdkConnection variable.

  Entry:

  Host (VC:HostSystem)

  SDK (VC:SdkConnection)

  LicenseKey (String)

  Code:

  SDK.licenseManager.licenseAssignmentManager.updateAssignedLicense (Host.id, LicenseKey, null);

  This works perfectly!

• 0 of 50000 FireSIGHT host remaining licenses

  This means that you have not discovered active user.

  Come on the discovery network/policies.

  If you have a defined "local" network and clock on the "pencil" or double click.  Next to 'The Action' at the top, click on "users".  Save and deploy.

  If you do not have a 'local' defined network, add a network as 'IPV4-private-All-RFC1918' and then repeat the steps above.

  This means that you have not discovered active user.

  Come on the discovery network/policies.

  If you have a defined "local" network and clock on the "pencil" or double click.  Next to 'The Action' at the top, click on "users".  Save and deploy.

  If you do not have a 'local' defined network, add a network as 'IPV4-private-All-RFC1918' and then repeat the steps above.

• Firesight licenses

  Hello

  Can someone answer me if the license for virtual firesight is progressive, which means I can buy 2 FS-VMW-2-SW-K9 then I can handle 4 sensors with this server?

  Just could not find this anywhere.

  Thank you

  Second ICA allows you to manage the other two, but you will have 2 VM to do the job of. No, they are not incremental.

  New license for 10 managed devices is necessary.

• OS command to several hosts of licensing issue of library work

  Hi all

  Is creating jobs and running OS command to several hosts draws from employment requires an additional license in grid 12 c?

  Thank you in advance!

  Jeffrey

  Hello Jeff,.

  No it is not necessary.

  Sincere greetings,

  Ansari

• Log Insight 3.3 shows several entries host consuming licenses - can I clean it?

  Hi all

  So I installed the Log Insight 3.3 for vCenter and it helped me to set up log shipping. Everything works well except two things:

  1. Duplicate hosts (see below) consume all my OSI licenses. Anyone know how I can clean one of the entries? (Of course, I can add FQDN ESXi host name if this is useful and supported)
  2. 5.5 ESXi hosts are not in list host - configuration double checked and restarted syslog. Possible due licenses OSI are consumed by the host entries a copy?

  Release notes:

  The host table can display devices more than once.
  The host table can display devices more than once with each in different formats, including a combination of IP address, hostname and domain FULL name. For example, a device called foo.bar.com may appear as foo and foo.bar.com.
  The host table uses the host name field that is defined in the syslog RFC. If an event sent by a device via the syslog Protocol does not have a host name, vRealize Log Insight uses the source under the host name. This can cause the device being listed repeatedly as vRealize Insight Log cannot determine if the two formats are pointing to the same device.

  Advice would be much appreciated.

  Thank you

  # 1 there is no way manually clear entries - for/admin/hosts the entry will be deleted once that all data from this host spun on (i.e. based on the retention period), for/admin/license if you click the question mark next to medium active HMOs, it says "The average County OSI active is the daily average number of hosts sending events to Log Insight." the big question is why are you seeing duplicates? Duplicates saw if DNS front AND rear are or are not configured correctly. Duplicates can also result in malformed syslog events.

  # 2, the question is not duplicated OSI - if this does not work, it means that something is wrong. It could be the network report including DNS resolution on the ESXi host or network firewall configuration (no configuration host firewall). You'll probably want to connect to and 5.5 ESXI host and check things like syslog configuration validation, confirming the network connectivity to LI, confirming DNS resolution to the syslog destination is work, etc..

  I hope this helps!

• The host is licensed with VMware vSphere 5 Standard. The license of vCenter Server edition doesn't support VMware vSphere 5 Standard.

  So I disconnected a host to vcenter server and now I get this error message when I try to reconnect to this host.  The host has been previously connected without any problem.  Vcenter servers as esxi are 5.5.0.  Anyone had any experience with this?

  Thank you.

  Unfortunately, I can't tell you for sure why it worked previously. Maybe it worked with an earlier version, or hosts have been added while vCenter Server was still running in trial mode. Anyway, if you have a license of Essentials for vCenter Server, you must also license processors Essentials the Essentials version is sold as a kit.

  André

• Migration and ESXi host PowerCLI license management

  Hi all

  I'm trying to understand if I want to do is possible using PowerCLI. I have 30 guests who need to have their permits assignment of keys changed/moved to a new key that was added to the environment. Is it possible to do this in PowerCLI?

  I got two keys with 16 cores of each key and I need to move my hosts specified for these new keys.

  Kind regards

  Paul

  A glance at the post by damien claim vSphere licenses through PowerCLI.

• Host-based license

  I have an ESX host with a license based on the host, now let's say the machine is not owned by our company, it's on "ready".

  Let's say we are audited by VM Ware, and they want to know our environment.  Now, let's say that 'ready' machine the company bankrupt, but still need to recover the license information.

  Is this possible?  If I click on the machine configuration and select about license, it displays 'host license file' and I vaguely remember implementation, but the person who sent me the file is of type LONG gone... and this is the story of the e-mail.  Is there a way I can connect to the server to get ANY type of license information (like where it was purchased, and how it was recorded, because someone has - I know that's not on the server, but any license information such that will help key).  How can I do this?

  The license file must be on the ESX host to: /etc/vmware/vmware.lic

  You should be able to pull usig WinSCP, then open it.  It will not show that he registered, but you can submit this file to supprt VM or licensing to make better known the owner/register(er?)

  Damon

• Host esx license problem substituting

  Hi all

  I have a problem when I try to replace it by an esx host.

  We have a total of 20 under license issued, 19 in use (9 esx host have 2 cpu, 1 esx host has 1 cpu).

  To add a new host esx (I'll call esx11), I had to unplug and remove a host of VIC (I'll call esx01).

  The result is that esx11 is "unlicensed" and if I make a 'survey of status' using license server tools (FYI License Server is installed on Virtual Center), it always reports as licensed hospitality that I disconnected (esx01).

  Any ideas?

  Thank you in advance.

  PIO Massaro

  just because you disconnect will not remove the license.  You must go to the ESX host, under the configuration tab and the features under license.  Change your license source.

• license limit supported

  Hello

  I have licensed WCS for 2500 Access Points and it should add more APs.

  Who is the maximun APs that can I get a license?

  Thank you!

  A one WCS can be licensed and manage 3000 APs.

• Windows 7 license limit

  Hello

  I formatted my computer because it has been infected by a Trojan horse, and now I can't activate windows 7, I get this error: exceeded key activation limit.
  But this key is active only in my computer.
  PS: I received my key to University (https://e5.onthehub.com)

  Try again by phone. You may need to do during the week.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Acrobat license limit reached error

  When I built the reference image for our Windows 7 machines, I
  installed Adobe Acrobat 11 with a unique serial number.  In addition, when Acrobat 10 reached the end of support, I improved the many machines 11 Acrobat or Acrobat DC.  When I did I recycled serial numbers as I have
  was in a hurry.  Please note that we
  have, and always have had enough of the serial numbers for the copies of Adobe on our
  systems.  At a certain point in demand
  realized that the serial numbers had been reused and assigned encourage citizens
  of a kick out of the application.
  I went to individual work stations, uninstalled the software, then
  reinstalled ensuring that I used a unique serial number.  (this has been recommended by Adobe support).

  Unfortunately, that did nothing to solve the problem.  I don't know if a registry key is stuck and
  the question or that the case is at the origin.  Any
  assistance can be provided would be great.

  

  Hi chrisw53748869 ,

  Please refer to this article:- Creative Cloud "Of Activation limit reached" or "cannot connect" errors

  Let me know how it goes.

  Kind regards

  Christian

• Number of hosts per cluster limit VMFS

  I can't find a decent answer to this question.  In versions, earlier we are limited to 8 hosts per cluster when using VMFS data with view warehouses.  All this changed with the advent of vSphere 5.5 or 6 view Horizon?  Looking at a bunch of documentation, I see that in vSphere specifications 5.1, it says "32 hosts (VMFS + NFS).  However, in the specifications of vSphere 5.5, he States '32 hosts', with not the Tag-Along "VMFS + NFS".

  Someone at - there no hard document about this?

  Thank you!

  Check out this link.  http://myvirtualcloud.NET/?p=4432