hostname gets vmnet8 form ip and no default dhcp server

Similar Questions

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• Get a strange IPv4 address of the DHCP server

  Hi all

  As title, I got a strange IP - DHCP server 169.254.XXX.XXX.

  I used Wireshark, tried to get the bootp packets.  I found that my laptop 169.254.xxx.xxx used as source address to send DHCP Discover.

  In addition, there is an option called content with 169.254.xxx.xxx requested ip address. Like my source address.

  I couldn't access the Internet with this IP address.

  I was wondering, is that it is a normal behavior for windows 7 to use 169.254.xxx.xxx to send DHCP Discover?

  A DHCP request is sent through the universal 255.255.255.255 broadcast address which is one of the addresses that a server is listening. The query includes the MAC address of the applicant unit because at this point, it doesn't have an IP address. The DHCP server responds to the MAC address in order to assign the address.

  In your case, the range 169.254 is called the APIPA address and the PC actually assigns to himself because he did not see a response from the DHCP server. As you refer to Wireshark having a reading of the present.

  http://wiki.Wireshark.org/APIPA

  The customer may not send the request via this address and get a response because the DHCP server is not listening on the address or by using the range. The answer must be done via the Mac.

• Client PC getting no no IP to win 2012 DHCP server

  Hello

  In my VMWare workstation9, I installed win 2012 (host only) & convert to domain. Then DHCP server set up/range over.

  Same time put in place Win 7 as a client (host only), but its not get IP from the DHCP server.

  Is what I need to put in place to distribute the IP?

  ~ r

  Hi Porto,

  It's done... Victory 2012 may authorize the scope 2 times, although I did it right after configure DHCP.

  Anyway thanks for your reply...

  ~ r

• I have no enigines research listed in my "manage search engine list" and the "Show search", "Get more search engines" and "Restore Defaults" do not work.

  There is nothing in the list of search engines manage and nothing works to get them. Help!

  You can check if you have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder.

  If this isn't the case, then you need to reinstall Firefox.

  You can find the full version of the current version of Firefox 31.0 in all languages and for all systems operating here:

  • https://www.Mozilla.org/en-us/Firefox/all.html

  Try to delete the file search.json and possible search - metadata.json and search.sqlite files in the profile folder of Firefox to reset the default search engines.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Firefox will rebuild the file search.json from the default search engines in the folder "browser\searchplugins" in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

• I changed my password to get into my phone and I don't remember, I can get by using the contact ID, but I don't remember the password. Is there a way to change this without typing the former in?

  I changed my password to get into my phone and I don't remember, I can get by using the contact ID, but I don't remember the password. Is there a way to change this without typing the former in?

  N ° you'll need to restore your iPhone:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Whenever I try to open or run all I get "Choose the program you want to use to open this file" and by default, Adobe Acrobat

  Whenever I try to open or run all I get - choose the program you want to use to open this file and its default Adobe Acrobat and he always answers this file type is not supported.  I can't open anything on my desktop, tried to reinstall Java, and even in my computer it asks me to choose a program to open it. Help!   I don't know what is happening!

  * original title - try to refresh, to run or install anything whatsoever, and it will not open executable files.*

  Hi LisaPisani,

  (1) did you the latest changes on the computer?

  (2) when was the last time it was working fine?

   

  Method 1

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 2

  If the previous step fails then I would suggest that you perform the system restore point when it worked very well and check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• In an attempt to sign and date a w-9, I get the following message.  "This form is editable in Adobe Acrobat DC.  Please use Adobe life cycle Designer. "How can I get this document dated and signed without having to buy the life cycle Designer?

  Please provide ideas to the next question. In an attempt to sign and date a w-9, I get the following message.  "This form is editable in Adobe Acrobat DC.  Please use Adobe life cycle Designer. "How can I get this document dated and signed without having to buy the life cycle Designer?

  Thank you

  Rick

  Assuming that you are dealing with a PDF file provided by the IRS, you will not be able to e-sign. but you can fill the fields using Adobe Reader or Acrobat. The version of form W-9 that I have does not include a date field, but you can use the feedback tool add text to add a date. You can also digitally sign or use the annotation of pencil tool to draw a signature.

• After installing acrobat DC... Get the form of acceptance of the user... It's long, I can't bring up the line ACCEPT... I'm doing the smaller characters, and so I can't read it!  Help

  After the upgrade and installation of acrobat DC... Get the form of acceptance of the user that is long enough.  I need to indicate that I AGREE to the terms, but in order to get at the end of the form, I do feel so small, I don't see the I AGREE button.  Help

  Hello

  The agreement is a bit long, are you not able to scroll down?

  Not even arrow keys on the keyboard?

  Concerning

  Sukrit diallo

• Had to reinstall Adobe Acrobat Pro on new PC because the former has failed - now I get incorrect serial number and cannot get the program to run

  One of my PCs is failed.  Had me hard drive replaced.  Now cannot get Adobe Acrobat to run - continues to give me the serial number incorrect message.  Cannot get someone via live chat.  Does that keep me running in a loop to get more information, again and again.  Help/support stinks.  I just want to know if I can get a correct serial number

  Hey jat0,

  You will have to contact or team contact customer support on Monday, they will be able to check the serial key & help you after this fixed number.

  Kind regards
  Nicos

• Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

  Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

  Hello

  Thanks for the quick response.

  What web browser do you use to access the links in my previous post?

  If you use Internet Explorer, I suggest to optimize Internet Explorer settings and check if it works.

   

   

   

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

   

  Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

   

  If the problem persists, you can reinstall the drivers for the Tuner card and check with the question.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Good day when you open the AppStore I get at e-mail address by default

  When the AppStore opening I get an e-mail address by default what wrong pair and impossible to replace operating system

  any ideas?

  Thank you

  Whose address email or Apple ID it belongs?  Do you know?

• How can I get rid of Google and get a normal web access where you type the address, and press "enter."

  whenever I open firefox, I get a box our and no placeto just type in the address andpressenter. How to return to the old?

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).

  If the menu bar is hidden, then press the F10 key or hold down the Alt key to make the call of menu bar.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Open the Customize via "view > toolbars > customize.
  • Make sure the "Bookmarks Toolbar items" are on the personal bar
  • If the "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the toolbar palette in the window the bookmarks toolbar Customize
  • If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
  • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar set up
  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.org/KB/back+and+forward+or+other+toolbar+items+are+missing

• I just installed FF4 and the default theme seems odd, how to fix?

  Hey, I just installed firefox 4 and the default theme doesn't look like the screenshots I've seen. I have no button firefox (I have a menu instead) and the interface has a dark background. In addition, the new tab buttons and the home page are in a different position.

  How do I change this to the default settings?
  

  Screenshot:

  http://img171.imageshack.us/img171/3190/firefox4h.jpg

  Thank you
  Andy

  The screenshot you provided does not work!

  It seems you're on Windows XP.

  Right-click on the menu bar and uncheck the option menu in the right click menu bar. You will see a Firefox orange Button in the leftmost tabbed moving upward.

  Where you need the menu bar in the future as it is sometimes necessary for some options, you can easily get it by the F10 key. It displays the menu temporarily.

  You can customize it by selecting the Customize option in the right click menu that I said to you, and you can drag and drop any button anywhere.

  The default theme on Windows XP is very dull.
  So, why not try personas. It is large and not memory hogs.
  http://www.getpersonas.com/en-us/

  Personally, I use the. Mind blowing look even better than the available themes navigation.

  Thnx for the use of Firefox.

• How can I get Adobe Photoshop to be my default program for windows 7

  I can't get Adobe Photoshop to be my default program that Photoshop will not import my card

  Do you mean making Photoshop the default program to open the photos as jpeg files?

  Try right-clicking on a photo (jpeg) file, click Open with. Glance for photoshop in the list. Then check always use this program to open this type of file. I'm not sure it's good that the exact wording. And then click OK.