Hotkey for Smartphones from blackBerry to the next message does not

Similar Questions

• Smartphones from blackBerry Desktop Manager - Calendar sync does not

  I noticed today that my calendar sync has not worked for a week or two. Nothing moves device or outlook, they are simply not speaking.  When you click on synchronize that he told me that he is dealing with, he lights the BB with the photo of transfer, he tells me "please a moment" then stops and returns to DM (as if he did so quickly, that I missed). But it does nothing, I checked the paper, nothing is recorded for calendar synchronization.

  Tasks, Memo, and address book are all working very well (it is a non set - up) so I've unchecked them to sync, so I can focus on the calendar.

  I uninstalled the Desktop Manager (and cleaned of all research in the files of application etc.) and then reinstalled version DM 5 - which does not set it.

  I used the backup & restore, Advanced Options and schedule database deleted completely then tried one-way synchronization from the pc to the device - that did not set it.

  I tried restoring from an old calendar backup - which does not set it.

  I restarted the phone - which does not set it.

  3 hours later, I am all ideas... any help would be appreciated please.

  I wiped my handheld completely computer (settings / options-> Security-> General settings options-> push the menu button and choose "scrub Pocket")

  Restored from backup, and now the clock works again.

• Smartphones from blackBerry Torch 9800 my email does not work via wifi

  I just sync my new torch of my old "BOLD". All information transferred perfectly including my 2 email accounts.

  I have the misfortune to live in an area of 2G alone on a remote island. SMS, phone calls and wifi only. I had my old "BOLD", via wifi hotspots on my gmail account and send and receive emails fine, but just say the torch was ' activation failed. A service connection is not available "whenever I try to activate the account.

  Seems that it won't work with wifi, I can surf the net without any problem

  Any ideas?

  Turn off the WiFi connection and go to an area where you have a clear link with the 2G (EDGE) and follow these steps:

  On your BlackBerry device, go to:

  1. options > advanced > host Routing Table > Menu > register.

  2 send your service from your carrier's BIS site books:
  Of your handheld: http://www.blackberry.com/btsc/KB15402

  Go to the Personal Email Set Up icon and sign. Then under help!, select Service books and select send service books.

  Your desktop PC: http://www.blackberry.com/btsc/KB02830
  North American carriers - scroll down to select your carrier
  Carriers worldwide - find your operator from the list

  3. with the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart. This restart, even if you have already done this, is often necessary to install the service books.

  Then, this should install it Service required to torch books, and you should be able to perform all data in WiFi services you have been in the past.

• Smartphones from blackBerry Desktop Manager stops and does not sync

  Hello, I just got my new BlackBerry Storm and I installed the software on my laptop running Vista Home.  The software loaded properly, the icon is on the desktop, but when I use the USB cable and open the Desktop Manager, then I click on synchronize and I get an error.  There is no error number, it just says: unknown error reported

  How can I get my mobile calendar and Notes to synchronize with my Blackberry Storm?

  Thank you

  Bill

  Well, I broke down and called Bell Mobility.  They had me up and running in a few minutes.  I guess I would have called them first, but history with Bell Mobility Technical Support... Well I only use as a last resort.

  in any case, the fix for this problem is to go into your control panel / user accounts / turn user account or disable / and then make sure that the box is NOT checked where it says use User Account Control to help protect your computer.

  My box has a check mark, so when I removed, then returned to the BBDM I was then able to synchronize my data between the Storm and my laptop.

  Thanks to those who helped, now we know what to do if someone else comes in the Forum with the same problem.

• Smartphones from blackBerry Bold 9900 - touchscreen functionality does not work

  I have a Bold 9900. Suddenly, the tactile feature went last night. Can someone please help?

  Thank you

  Ved

  It is you

  1. remove the battery and the Sim Card

  2. replace the battery only in the phone and restart the phone (once you restart the touch screen should start to work)

  3. turn off the phone, take the dough back, put the SIM and battery back in and power on and you should be good to go

  Thanks to Jane 0810 for the soloution

• BlackBerry smartphone email sent to the alias address does not appear on BB

  I have a University e-mail address ([email protected]) that works very well with my Blackberry. I also have an alias name in the same University ([email protected]) - a different format for the name of the address and the domain name, but its an alias on the same Exchange Server. Electronic mail addressed to me at the address alias does not to the Blackberry, but appears on the University e-mail reader. I'm unable to set up the e-mail address alias name in the Blackberry because the University server does not recognize the name of the alias as a login ID is valid.
  Someone else has had this same problem and fixed it? Thank you. DW

  Problem solved.  Simply deleted and recreated the email account on Blackberry.  Duh - should have done this before I posted...

  DW

• HP keyboard model kg-0851, I tried all the steps from hp, but the keyboard still does not

  I tried all the steps from hp, but the keyboard still does not.  When I look at the Device Manager, it says that it is fine.

  Hello

  1. what operating system is installed on the computer?
  2 have. what troubleshooting measures you tried?
  3. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• I just bought the edition student pro Adobe Acrobat XI from amazon. The installation wizard does not recognize my valid serial number. I entered it with and without a hyphen. What should I do?

  I just bought the edition student pro Adobe Acrobat XI from amazon. The installation wizard does not recognize my valid serial number. I entered it with and without a hyphen. What should I do?

  Is the serial number a 24 digit code?

  It is best to contact the Support from Adobe and check with the serial number once:

  "Click the button still needing help, and then select the Chat option:

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_account-settings _stillNeedHelp

• The controller throws an OAException, but the error message does not appear

  I made a controller to add validation business customized to a specific region of a page of Iprocurement. The controller throws an exception, but the error message does not appear on the page.

  Why when the exception is thrown, the system do not stop the processing of the page and displays the error message?

  I do not know the controller is reached because the page through JDeveloper debugging.

  -PageLayout

  -stackLayout

  -subTabLayout <-my controller is located in this region

  SerializableAttribute public class AccountsDistsValidationCO extends

  {oracle.apps.fnd.framework.webui.OAControllerImpl}

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processFormRequest (pageContext, webBean);

  throw new OAException ("something just happned");

  }

  }

  I should to use the following to solve my problem

  pageContext.putDialogMessage (message);

  pageContext.forwardImmediatelyToCurrentPage (null, true, null);

  Reference:

  OAException.ERROR is not throwing the error

• Option of 'Options' of the Smartphones from blackBerry in the BB Menu button doesn't work is not on the Torch 9800

  Whenever I select 'Options' from the drop of the BB Menu button on my Torch 9800, the screen flashes, then back to my home screen. It has been so for a long time (almost a year) and I think that there is a permission that has been disabled inadverdently. It does work if I use the theme BB6 native or other that I downloaded. Anyone know how to make 'Options' to the option to start working again?

  Hi randynjaimie,

  Try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software.

  For more information, see the following article. How to perform a clean reload of the BlackBerry Device Software for Windows. www.BlackBerry.com/BTSC/kb11320
  Please test to make sure that the problem has been resolved before restoring all the data from your backup file.

  I hope this helps.

• Smartphones from blackBerry Torch 9810 - new applications do not appear in the tab all

  I've recently upgraded to a Torch 9810 with OS7 on it. Started installing apps (done a clean install of Apps instead of installing from a backup or anything like that), but when I went to run the application, I could not find in the tab all.  But when I go into Options > device > application management, it shows the program installed. So I tried to install other apps and the same thing happened.

  So I took a picture of something and went in the Media tab to see photos. And here there are all the Apps that I have installed in the Media tab. Then tried to move them to the all tab and he'd let me, only allowed me to move the application to a different location on the media tab, and not to another tab.

  So first, how can I get the Apps install in the right folder? Secondly, how can I move the Apps that I have installed it in a different tab?

  Thank you.

  From your home screen, press the BB menu key.  In the menu, you will see two things you might be interested in setting... Manage the panels and Options.

  Manage panels to configure how many panels you want to use.  I chose only the Panel all, so everything gets displayed here.

  In the Options, this is where you tell your device where you want to store Applications downloaded in the "download folder".

• Install the plug-in from BlackBerry to Android development tools does not download

  Hi all

  When I am trying to download Blackberry plugin for Android with the eclipse of "developer.blackberry.com/android/downloads/eclipseplugin/" all files are not downloading.Commandline tools for DURATION for Android App also does not work. A video tutorial is provided how to configure Blackberry plugin for Android, even as I did. I use the latest version of the Android SDK that comes integrated with Eclipse.

  No idea how to get the plugin. Thanks in advance.

  It is fixed. Only, I added "beta" at the end of the url string. But according to the guidelines of your document, it is not mentioned. Please add full URL include "beta" at the end of your document.

• Smartphones from blackBerry Storm again showing message - no message anywhere...?

  I have my setup of storm for two e-mail accounts and text messaging. About an hour ago my Storm showed an unread message, but for the life of me I can't find it anywhere. The indicator shows the yellow envelope (no red asterisk) and I checked the two mailboxes (both empty), voicemail (empty), and my test of the messages (no unread). Is there a way to know why my storm says I have an unread message? I even took the battery and restarted does not.

  Thank you.

  Try to check in the saved messages folder. Database Messages, simply press the menu key and select view saved Messages

• deploy from model with the custom form does not not - NIC becomes disconnected

  [We're using vcenter 5.1 update 2]

  I have created a new model for 2012 Server R2 and I created a specification tailored to go with it. I went to test the deployment of the other day and it seemed that the personalised has not quite finished. He had put the local administrator password and baptized, but he does not join the domain. I finally understood that after the deployment, the NETWORK adapter is not connected despite having me 'connect to light' checked in the model. We are using the VMXNET 3 card.

  I've been messing around with the template for the past 2 days and I am stuck as to why it does not work. I tried the following...

  -checked the windows firewall is disabled (3 options) (Re: ESXi 5 VM / Server 2008 R2 loses the network connection after reboot)

  -removed NIC; cleaned up the registry to the HKLM\System\CurrentControlSet\Control\Network\; restarted; readded NIC (it was to eliminate any ghost NICs) (http://vnetwise.wordpress.com/2012/06/09/vmware-template-deploymentspart-1-trying-to-modify/)

  -Remove vmware tools and reinstall. (http://vnetwise.wordpress.com/2012/06/09/vmware-template-deploymentspart-1-trying-to-modify/)

  -card network in the operating system, unchecked "allow the computer to turn off to save energy" (Re: ESXi 5 VM / Server 2008 R2 loses the network connection after reboot)

  -checked that my new 2012R2 model uses the same host cluster and storage as my 2012 model that works. Also on the same port group distributed. (Essentially, all parameters of vcenter are identical between the two models)

  -also tried disabling the NETWORK card in the model (Windows Server 2012 comments customization)

  I have re-deployed the same server about 10 times and each time after deployment, you can see restart and try starting the customization but it crashes. If I manually turn the NIC on it is completed successfully. The problem is that I don't want to have to do that each time I deploy a server. Why is it disable the NIC and unchecking my option to connect to turn on and how to fix this?

  6.23.2014

  Based on tests (as detailed below):

  5.1 U2 - when patterns of deployment Server R2 2012 using a custom form, the NIC is not on after the deployment despite having ' connect at power on "checked.

  * We use VMXNET 3 and we use vDS

  
  

  Any help is very appreciated!

  -Adam

  Post edited by: atom_acres

  Problem solved: you need to update the hardware VM version from 8 to 9 on the template (also be sure to check "running on check and put vmtools")

  When you create a new virtual machine from scratch in 5.1 U2, he apparently uses VM Hardware version 8 instead of the latest v9. Once I upgraded it, made sure to check the box to have check and tools upgrade vm market, deploying with customization works and the NETWORK adapter is enabled when lit!

• move the focus to the next window, does not, PS CS3

  I searched the web for the last hour, try to understand it, here's my problem:

  When I type cmd +' I want to move the focus to the next window, so I can scroll through all the files that I opened.

  I'm on PS CS3 and OS 10.5.8

  It works in Indesign, Illustrator and Acrobat (also CS3), but not Photoshop for some reason any. During my research, I found you're supposed to be able to hit cmd + tab to scroll through windows, but that takes me to the next request, not the windows within the PS I want to keep this action put in place like that for my workflow.

  I tried the things:

  In system preferences, keyboards and mice, I have the F keys disabled because I have implemented actions on keys F. I tried enabeling the Fs, but it still doesn't work.

  I've been lookin under shortcuts (cmd + option + SHIFT + K) time after time and can not find the place where the next window is specified. If I could find maybe then I could change the shortcut, I know how to do this.

  I checked under the system preferences keyboard shortcuts and cmd +' is implemented through the windows. It works in every other application I can think but Photoshop.

  Help, please!

  miclled wrote:

  During my research, I found you are supposed to be able to hit cmd + tab to scroll through windows, but that takes me to the next, not asking the windows within the PS

  Try the command + tab, no command + tab